Series 804
www.glenair.com E-Mail: sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
G-15
© 2014 Glenair, Inc. Series 80 Mighty Mouse U.S. CAGE Code 06324 Printed in U.S.A.
Dimensions in Inches (millimeters) are subject to change without notice.
G
Rear Panel Mount
Jam Nut
Front Panel Mount
Jam Nut
In-Line
Integral Band Platform
for direct attachment of a cable shield. Install a boot, or
overmold directly onto the band platform. Or, choose an
accessory thread for attaching strain reliefs and backshells.
Three Shell Styles
Jam nut with O-ring for front or rear panel mounting, or in-line
receptacles for free-hanging cables.
Watertight, Shielded
O-ring inside the receptacle provides a dynamic seal when
mated. Gold-plated spring provides secure mechanical
retention and low shell-to-shell resistance for excellent EMI
shielding.
Series 804 Push-Pull Mighty Mouse
Receptacle Connector
804-003 and 804-004 Ordering Information
How To Order
Sample Part Number 804003 01 M 710 P
Series (See Table I) 804-003 = Receptacle with Banding Platform
804-004 = Receptacle with Accessory Thread
Shell Style (See Table II)
-00 = Front Panel Mount Jam Nut (See Table V)
-01 = In-Line
-07 = Rear Panel Mount Jam Nut (See Table IV)
Shell Material and Finish
C = Aluminum / Black Anodize (Non-Conductive); RoHS Compliant
M = Aluminum / Electroless Nickel; RoHS Compliant
MT = Aluminum / Nickel-PTFE RoHS Compliant
NF = Aluminum / Cadmium with Olive Drab Chromate
ZNU = Aluminum / Zinc-Nickel with Black Chromate
Z1 = Stainless Steel / Passivated; RoHS Compliant
Shell Size - Insert Arrangement See Contact Arrangements Page G-2
Contact Type
Connector supplied Connector supplied Connector Supplied
without contacts Crimp contacts with 30 AWG Crimp Barrel
A = Pin , Crimp P = Pin Connector G = Pin, Crimp
B = Socket , Crimp S = Socket Connector H = Socket, Crimp
Connectors with contacts are supplied with signal and/or power crimp contacts.
These contacts are not installed.
Coaxial contacts and non-standard signal contacts are ordered separately.
Shell Key Positions
(See Table III) Omit = Single Master Key A = Normal B = Pos. B C = Pos. C D = Pos. D E = Pos. E F = Pos. F
Table I: Series
-
Receptacle with Banding
Platform
-
Receptacle with Accessory
Thread
Table II: Shell Style
-
Jam Nut for Front Panel
Mounting
-
In-Line for Free-Hanging
Cable
-
Jam Nut for Rear Panel
Mounting