CONTACTS
Arrangement SPDT (1 Form C)
Ratings Resistive load:
Max. switched power: 30 W or 250 VA
Max. switched current: 2 A
Max. switched voltage: 150 VDC* or 300 VAC
UL Rating: 2 A at 125VAC General Use
1 A at 240 VAC General Use
1 A at 30 VDC Resistive
Material Silver nickel, gold plated
Resistance < 100 milliohms initially
GENERAL DATA
Life Expectancy Minimum operations
Mechanical 1 x 107
Electrical 1 x 105at 2 A 120 VAC Res.
Operate Time (typical) 5 ms at nominal coil voltage
Release Time (typical) 1 ms at nominal coil voltage
(with no coil suppressions)
Dielectric Strength 1250 Vrms coil to contact
(at sea level for 1 min.) 750 Vrms between open contacts
Insulation Resistance 100 megohms min. at 20°C, 500 VDC
Dropout Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating 0.45W: -25°C (-13°F) to 75°C (167°F)
0.36W: -25°C (-13°F) to 85°C (185°F)
0.2W: -25°C (-13°F) to 95°C (203°F)
Storage -25°C (-13°F) to 130°C (266°F)
Vibration 0.062" DA at 10–55Hz
Shock 15 g
Enclosure P.B.T. polyester
Terminals Tinned copper alloy
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight 3.5 grams
COIL
Power
At Pickup Voltage 0.45 W coil: 253 mW
(typical) 0.36 W coil: 203 mW
0.2 W coil: 114 mW
Max Continuous
Dissipation 1.0 W at 20°C (68°F) ambient
Temperature Rise At nominal coil voltage:
0.45W: 54°C (97°F)
0.36W: 44°C (79°F)
0.2W: 30°C (54°F)
Max. Temperature 130°C (266°F)
5/16/05W
SUBMINIATURE
POWER RELAY
FEATURES
•Subminiature size for high density packaging
•Coil sensitivity to 114 mW
•Extremely low cost
•Coils to 24 VDC
•Epoxy sealed versions available
•2 Amp contacts
•Class B insulation standard
•Life expectancy to 10 million operations
•UL, CUR file E43203
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Other coil resistances and sensitivities available upon request.
4. Specifications subject to change without notice.
AZ954
0.2 W COIL
COIL SPECIFICATIONS
Nominal Coil Max. Continuous Coil Resistance Must Operate ORDER NUMBER*
VDC VDC ±10% VDC
3 6.7 45 2.25 AZ954X–1C–3DS AZ954Y–1C–3DS
5 11 120 3.75 AZ954X–1C–5DS AZ954Y–1C–5DS
6 13.4 180 4.50 AZ954X–1C–6DS AZ954Y–1C–6DS
9 20 400 6.75 AZ954X–1C–9DS AZ954Y–1C–9DS
12 26.5 700 9.0 AZ954X–1C–12DS AZ954Y–1C–12DS
24 59.9 2800 18.0 AZ954X–1C–24DS AZ954Y–1C–24DS
* Add suffix “E” for epoxy sealed version.
RELAY ORDERING DATA
0.45 W COIL
COIL SPECIFICATIONS
Nominal Coil Max. Continuous Coil Resistance Must Operate ORDER NUMBER*
VDC VDC ±10% VDC
3 4.5 20 2.25 AZ954X–1C–3D AZ954Y–1C–3D
5 7.5 56 3.75 AZ954X–1C–5D AZ954Y–1C–5D
6 8.9 80 4.50 AZ954X–1C–6D AZ954Y–1C–6D
9 13.4 180 6.75 AZ954X–1C–9D AZ954Y–1C–9D
12 17.8 320 9.0 AZ954X–1C–12D AZ954Y–1C–12D
24 35.7 1280 18.0 AZ954X–1C–24D AZ954Y–1C–24D
0.36 W COIL
COIL SPECIFICATIONS
Nominal Coil Max. Continuous Coil Resistance Must Operate ORDER NUMBER*
VDC VDC ±10% VDC
3 5.0 25 2.25 AZ954X–1C–3DM AZ954Y–1C–3DM
5 8.4 70 3.75 AZ954X–1C–5DM AZ954Y–1C–5DM
6 10 100 4.50 AZ954X–1C–6DM AZ954Y–1C–6DM
9 15 225 6.75 AZ954X–1C–9DM AZ954Y–1C–9DM
12 20 400 9.0 AZ954X–1C–12DM AZ954Y–1C–12DM
24 40 1600 18.0 AZ954X–1C–24DM AZ954Y–1C–24DM
AZ954
5/16/05W
MECHANICAL DATA
Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010"
[1.52]
.060
[ø1.0]
5x ø.039±.005
AZ954X PC BOARD LAYOUT
[1.56]
[7.62]
.300
[11.81]
.465
[3.18]
.125
[15.75]
.620
.062
[10.16]
.400
[2.54]
.100
VIEWED TOWARD TERMINALS
AZ954X WIRING DIAGRAM
VIEWED TOWARD TERMINALS
AZ954Y WIRING DIAGRAM
VIEWED TOWARD TERMINALS
7
12
1112
[2.54]
VIEWED TOWARD TERMINALS
2
11
6
7
[1.52]
.060
[ø1.0]
6x ø.039±.005
[7.62]
.300
[1.56]
AZ954Y PC BOARD LAYOUT
1
12
[2.54]
.100
.060
[1.52]
[7.62]
[10.75]
.300
.423
.062
[10.16]
.400
.100
