AZ954 SUBMINIATURE POWER RELAY FEATURES * * * * * * * * * Subminiature size for high density packaging Coil sensitivity to 114 mW Extremely low cost Coils to 24 VDC Epoxy sealed versions available 2 Amp contacts Class B insulation standard Life expectancy to 10 million operations UL, CUR file E43203 CONTACTS Arrangement SPDT (1 Form C) Ratings Resistive load: Max. switched power: 30 W or 250 VA Max. switched current: 2 A Max. switched voltage: 150 VDC* or 300 VAC UL Rating: 2 A at 125 VAC General Use 1 A at 240 VAC General Use 1 A at 30 VDC Resistive Material Silver nickel, gold plated Resistance < 100 milliohms initially GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 2 A 120 VAC Res. Operate Time (typical) 5 ms at nominal coil voltage Release Time (typical) 1 ms at nominal coil voltage (with no coil suppressions) Dielectric Strength 1250 Vrms coil to contact (at sea level for 1 min.) 750 Vrms between open contacts Insulation Resistance 100 megohms min. at 20C, 500 VDC Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage 0.45W: -25C (-13F) to 75C (167F) 0.36W: -25C (-13F) to 85C (185F) 0.2W: -25C (-13F) to 95C (203F) COIL Power At Pickup Voltage (typical) Max Continuous Dissipation Temperature Rise Max. Temperature Storage -25C (-13F) to 130C (266F) 0.45 W coil: 253 mW 0.36 W coil: 203 mW 0.2 W coil: 114 mW Vibration 0.062" DA at 10-55Hz Shock 15 g 1.0 W at 20C (68F) ambient Enclosure P.B.T. polyester At nominal coil voltage: 0.45W: 54C (97F) 0.36W: 44C (79F) 0.2W: 30C (54F) Terminals Tinned copper alloy Max. Solder Temp. 270C (518F) Max. Solder Time 5 seconds Max. Solvent Temp. 80C (176F) Max. Immersion Time 30 seconds Weight 3.5 grams 130C (266F) NOTES 1. All values at 20C (68F). 2. Relay may pull in with less than "Must Operate" value. 3. Other coil resistances and sensitivities available upon request. 4. Specifications subject to change without notice. 5/16/05W AZ954 RELAY ORDERING DATA 0.45 W COIL COIL SPECIFICATIONS Nominal Coil VDC 3 Max. Continuous VDC 4.5 Coil Resistance 10% 20 Must Operate VDC 2.25 ORDER NUMBER* AZ954X-1C-3D AZ954Y-1C-3D 5 7.5 56 3.75 AZ954X-1C-5D AZ954Y-1C-5D 6 8.9 80 4.50 AZ954X-1C-6D AZ954Y-1C-6D 9 13.4 180 6.75 AZ954X-1C-9D AZ954Y-1C-9D 12 17.8 320 9.0 AZ954X-1C-12D AZ954Y-1C-12D 24 35.7 1280 18.0 AZ954X-1C-24D AZ954Y-1C-24D 0.36 W COIL COIL SPECIFICATIONS Nominal Coil VDC 3 Max. Continuous VDC 5.0 5 Coil Resistance 10% 25 8.4 ORDER NUMBER* Must Operate VDC 2.25 AZ954X-1C-3DM 70 3.75 AZ954X-1C-5DM AZ954Y-1C-5DM AZ954Y-1C-3DM 6 10 100 4.50 AZ954X-1C-6DM AZ954Y-1C-6DM 9 15 225 6.75 AZ954X-1C-9DM AZ954Y-1C-9DM 12 20 400 9.0 AZ954X-1C-12DM AZ954Y-1C-12DM 24 40 1600 18.0 AZ954X-1C-24DM AZ954Y-1C-24DM 0.2 W COIL COIL SPECIFICATIONS Nominal Coil VDC 3 Max. Continuous VDC 6.7 Coil Resistance 10% 45 ORDER NUMBER* Must Operate VDC 2.25 AZ954X-1C-3DS AZ954Y-1C-3DS AZ954Y-1C-5DS 5 11 120 3.75 AZ954X-1C-5DS 6 13.4 180 4.50 AZ954X-1C-6DS AZ954Y-1C-6DS 9 20 400 6.75 AZ954X-1C-9DS AZ954Y-1C-9DS 12 26.5 700 9.0 AZ954X-1C-12DS AZ954Y-1C-12DS 24 59.9 2800 18.0 AZ954X-1C-24DS AZ954Y-1C-24DS * Add suffix "E" for epoxy sealed version. MECHANICAL DATA .620 [15.75] AZ954X PC BOARD LAYOUT .423 [10.75] .400 [10.16] .465 [11.81] 5x o.039.005 [o1.0] .060 [1.52] .060 [1.52] .100 [2.54] .125 [3.18] AZ954X WIRING DIAGRAM 1 .300 [7.62] .300 [7.62] .100 [2.54] VIEWED TOWARD TERMINALS AZ954Y PC BOARD LAYOUT AZ954Y WIRING DIAGRAM 1 2 .062 [1.56] .400 [10.16] 2 .062 [1.56] 6 6x o.039.005 [o1.0] 7 7 12 11 VIEWED TOWARD TERMINALS .300 [7.62] 12 11 VIEWED TOWARD TERMINALS .060 [1.52] .100 [2.54] VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: 0.010" 5/16/05W