ALUMINUM ELECTROLYTIC CAPACITORS TVX Standard, For General Purposes - Axial Lead Type (02 type) (Through 100V only) Axial lead type of standard series for general purposes. Compliant to the RoHS directive (2011/65/EU). Specifications Item Performance Characteristics Category Temperature Range -40 to +85C (6.3 to 250V), -25 to +85C (315 to 450V) Rated Voltage Range 6.3 to 450V Rated Capacitance Range 0.47 to 10000F Capacitance Tolerance 20% at 120Hz, 20C Rated voltage (V) Leakage Current 6.3 to 100 160 to 450 In case of CV 1000 After 1 minute's application of rated voltage at 20C, not more than 0.1CV+40 (A) . In case of CV > 1000 After 1 minute's application of rated voltage at 20C, not more than 0.04CV+100 (A) . After 1 minute's application of rated voltage at 20C, not more than 0.03CV or 4 (A) , whichever is greater. Leakage current After 2 minutes' application of rated voltage at 20C, not more than 0.01CV or 3 (A) , whichever is greater. Measurement frequency : 120Hz at 20C Rated voltage (V) Tangent of loss angle (tan ) 6.3 0.24 tan (MAX.) 10 0.20 16 0.16 25 0.14 35 0.12 50 0.10 63 to 100 160 to 315 350 to 450 0.08 0.20 0.25 For capacitance of more than 1000F, add 0.02 for every increase of 1000F. Measurement frequency : 120Hz Rated voltage (V) Z-25C / Z+20C Impedance rat io ZT / Z20 (MAX.) Z-40C / Z+20C Stability at Low Temperature 6.3 4 10 10 3 8 16 2 6 25 2 4 35 to 100 160 to 250 315 * 350 400 * 450 2 4 6 15 3 12 -- -- Endurance The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours at 85C. Capacitance change tan Leakage current Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Shelf Life After storing the capacitors under no load at 85C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the characteristic requirements at right. Capacitance change tan Leakage current Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Marking Printed with white color letter on purple blue sleeve. Axial Lead Type Type numbering system (Example : 10V 330F) 1 Sleeve (P.E.T.) Sealing rubber packing Sleeve (P.E.T.) Sealing rubber packing 35MIN 4 5 6 7 8 9 10 11 d MAX Rated voltage (10V) Series name 35MIN MAX Series name Type 35 MIN (D < 10) 1 D 5 to 13 16 to 18 (D d 0.6 0.8 10) 2 Configuration Configuration Capacitance tolerance (20%) Capacitance tolerance (20%) Rated capacitance (330F) Rated capacitance (330F) Rated voltage (10V) Configuration Configuration Pb-free leadwire D Pb-free PET sleeve Pb-free leadwire Pb-free PET 5 toD8 AD sleeve (mm) 3 +0.5MAX +0.5MAX D D L+ L+ 35MIN (10up) 2 10 11 T1 V2 X3 14 A5 36 37 18 M9 A D T V X 1 A 3 3 1 MAD Pressure relief vent (10up) relief vent Pressure d to 18 8 105 to 10 to 18 Type AD CD CD Please refer to page 22 about the taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. 184 CAT.8100H ALUMINUM ELECTROLYTIC CAPACITORS TVX (02 type) Dimensions 6.3 0J V Cap.(F) Code 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 4700 6800 10000 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 102 222 332 472 682 103 5 x 12 6.3 x 16 6.3 x 16 8 x 16 10 x 21 13 x 26 13 x 26 16 x 31.5 16 x 31.5 16 x 41.5 Code 1 2.2 3.3 4.7 10 22 33 47 100 010 2R2 3R3 4R7 100 220 330 470 101 16 1C 13 23 33 39 60 120 170 230 430 25 1E 5 x 12 6.3 x 16 8 x 16 8 x 16 8 x 20 10 x 26 13 x 31.5 16 x 31.5 16 x 41.5 18 x 41 110 6.3 x 12 130 200 6.3 x 16 210 250 8 x 16 300 330 8 x 16 350 600 10 x 21 640 1020 13 x 26 1090 1200 13 x 31.5 1390 1500 16 x 31.5 1730 1840 16 x 41.5 1930 2260 18 x 41 2350 160 2C 6.3 x 12 6.3 x 16 8 x 16 8 x 16 8 x 20 10 x 26 13 x 26 13 x 31.5 16 x 41.5 V Cap.(F) 10 1A 200 2D 6.3 x 12 6.3 x 16 8 x 16 8 x 16 10 x 21 13 x 26 13 x 26 13 x 31.5 16 x 41.5 13 23 33 39 70 140 170 230 430 35 1V 5 x 12 80 100 85 6.3 x 12 170 160 6.3 x 16 280 260 8 x 16 380 320 8 x 20 510 430 10 x 26 900 770 13 x 26 1180 16 x 31.5 1480 1620 16 x 41.5 1710 1840 18 x 41 2170 2310 250 2E 6.3 x 16 8 x 16 8 x 16 8 x 20 10 x 21 13 x 26 13 x 31.5 16 x 31.5 16 x 41.5 14 27 33 45 70 140 190 260 430 5 x 12 70 6.3 x 12 90 6.3 x 16 120 8 x 16 210 8 x 20 340 10 x 21 460 10 x 26 610 13 x 31.5 1060 16 x 31.5 1580 16 x 41.5 2050 315 2F 6.3 x 16 8 x 16 8 x 20 8 x 20 10 x 26 13 x 31.5 16 x 31.5 16 x 31.5 14 27 36 45 80 150 210 260 50 1H 5 x 12 5 5 x 12 10 5 x 12 23 5 x 12 28 5 x 12 34 5 x 12 50 6.3 x 12 85 6.3 x 16 110 6.3 x 16 130 8 x 16 220 10 x 21 410 10 x 26 560 13 x 26 730 16 x 31.5 1260 18 x 41 1920 350 2V 6.3 x 16 8 x 16 8 x 20 10 x 21 13 x 26 13 x 31.5 16 x 31.5 16 x 41.5 12 24 32 46 85 140 190 260 63 1J 5 x 12 55 6.3 x 12 90 6.3 x 16 120 8 x 16 160 8 x 20 260 10 x 26 480 13 x 26 650 13 x 31.5 840 16 x 31.5 1330 400 2G 8 x 16 8 x 20 10 x 21 10 x 21 13 x 26 16 x 31.5 16 x 41.5 18 x 41 14 28 38 46 85 150 210 290 100 2A 5 x 12 5 x 12 5 x 12 5 x 12 5 x 12 6.3 x 12 8 x 16 8 x 16 8 x 20 10 x 26 13 x 26 13 x 31.5 16 x 31.5 10 18 28 34 40 60 120 150 190 340 560 750 970 450 2W 8 x 16 10 x 21 10 x 21 10 x 26 13 x 26 16 x 31.5 18 x 41 14 31 38 50 85 150 230 Case size Rated D x L (mm) ripple Rated ripple current (mArms) at 85C 120Hz Frequency coefficient of rated ripple current V Cap.(F) Frequency 0.47 to 47 6.3 to 100 100 to 470 1000 to 10000 160 to 450 1 to 100 120 Hz 300 Hz 1kHz 10kHz or more 1.00 1.35 1.57 2.00 1.00 1.23 1.34 1.50 1.00 1.10 1.13 1.15 1.00 1.25 1.40 1.60 185 CAT.8100H