JST10L
The FPZ is a Zero Insertion Force (ZIF)
connector designed for surface mounting
of FFCs with a lead pitch of 1.0mm. With its
mating slider serving as a guide, the FPZ
connector ensures easy and reliable
connection. It also features high heat
resistance, which is suitable for surface
mounting, and can be supplied in the form
of emboss taping to facilitate automatic
mounting.
Features ––––––––––––––––––––––––
• Easy and reliable connection
Connection can be made simply by inserting the leads into the
connector and pressing the slider. Once the leads are inserted,
they are held by the 4-side guides located inside the slider so
that they will not dislocate or come off.
• Emboss taping for automatic mounting
The FPZ is supplied in the form of emboss taping for automatic
mounting.
• Heat resisting design suitable for surface
mounting
This surface mounting type is designed to meet the needs of
surface mountable devices inside electronic equipment. The
housing is made of highly heat resisting resin to allow reflow
soldering.
• High-density design, with a height of a mere
2.9mm
The circuit pitch at the soldered portion is 1.0mm and its
mounting height is 2.9mm when locked. The FPZ is a compact
and low-profile design.
Specifications –––––––––––––––––––
• Current rating: 0.5A AC, DC
• Voltage rating: 50V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/20m Ωmax.
After environmental testing/30m Ωmax.
• Insulation resistance: 800M Ωmin.
• Withstanding voltage: 500V AC/minute
• Applicable FFC: Conductor pitch/1.0mm
Conductor width/0.7mm
Mating part thickness/0.30±0.05mm
<Note
>
FFC to be actually used should be checked for applicability.
*Compliant with RoHS.
*Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0Recognized E60389
1Certified LR20812
FPZ CONNECTOR
Connectors for FFC
1.0mm
pitch
Emboss Tape
1
2
FPZ CONNECTOR
Lead section dimensions of FFC ––––––––––––––––––––––––––––––––––––––––––––
(10.0)
5.5min.
Base layer
Conductor
Reinforcing layer
Film cover layer
1.0±0.15
1.0±0.1 0.3±0.05
1.0±0.15
1.0x(N+1)±0.12
1.0x(N-1)±0.1
0.7±0.1
PC board layout (viewed from component side) and Assembly layout ––––––––––––––––––
6.5max.
1.7+0.2
0
2.5
2.8±0.1
Conductor surface
FFC
2.9
6.5 1.5
3.7±0.11.0±0.030.6±0.05
Note:
1. Tolerances are non-cumulative: ±0.03mm for all centers.
2. The dimensions above should serve as a guideline.
Contact JST for details.
Note: N --- Number of circuits
Connector –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
JST
A
2.75
0.75
1.5
6.5
2.1
1.5
B
2.0
2.9
1.0
Model No.Circuits Dimensions (mm)
AB
Q'ty /
reel
Material and Finish
7
8
10
11
12
13
14
15
16
18
20
24
25
07FPZ-SM-TF
08FPZ-SM-TF
10FPZ-SM-TF
11FPZ-SM-TF
12FPZ-SM-TF
13FPZ-SM-TF
14FPZ-SM-TF
15FPZ-SM-TF
16FPZ-SM-TF
18FPZ-SM-TF
20FPZ-SM-TF
24FPZ-SM-TF
25FPZ-SM-TF
6.0
7.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
17.0
19.0
23.0
24.0
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
13.0
14.0
16.0
17.0
18.0
19.0
20.0
21.0
22.0
24.0
26.0
30.0
31.0
Contact: Phosphor bronze, copper-undercoated, tin-plated (reflow treatment)
Reinforcing metal: Brass, tin-plated (reflow treatment)
Housing: PPS, UL94V-0
Note: The products listed above are supplied on embossed tape.
RoHS compliance This product displays (LF)(SN) on a label.
