SILICON PLANAR EPITAXIAL
PNP TRANSISTOR
Semelab Limited reserves the right to change test conditions, parameter limits and package dimensions without notice.
Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However
Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to
verify that datasheets are current before placing orders.
Semelab Limited
Semelab LimitedSemelab Limited
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com
Document Number
10300
Issue
1
Page 1 of
3
BFX87
• Hermetic TO-39 Metal package.
• Screening Options Available
ABSOLUTE MAXIMUM RATINGS
(TA = 25°C unless otherwise stated)
VCBO Collector – Base Voltage -50V
VCEO Collector – Emitter Voltage -50V
VEBO Emitter – Base Voltage -5V
IC Continuous Collector Current -600mA
ICM Peak Collector Current -600mA
IEM Peak Emitter Current -600mA
PD Total Power Dissipation at TA = 25°C 0.6W
Derate Above 25°C 5.9mW/°C
TJ Junction Temperature Range -65 to +200°C
Tstg Storage Temperature Range -65 to +200°C
THERMAL PROPERTIES
Symbols Parameters Max. Units
RθJA Thermal Resistance, Junction To Ambient 291.6 °C/W
SILICON PLANAR EPITAXIAL
PNP TRANSISTOR
BFX87
Semelab Limited
Semelab LimitedSemelab Limited
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com
Document Number
10300
Issue
1
Page 2 of
3
ELECTRICAL CHARACTERISTICS
(TC = 25°C unless otherwise stated)
Symbols Parameters Test Conditions Min.
Typ Max.
Units
ICBO
Collector Cut-off current
VCB = -40V
IE = 0
-50 nA
VCB = -50V IE = 0 -500
VCB = -40V IE = 0 -2 µA
TA= +100°C
IEBO Emitter Cut-Off Current
VEB = -3.0V IC = 0 -100 nA
VEB = -4.0V IC = 0 -500
hFE
(1)
Forward-current transfer
ratio VCE = -10V
IC = -1.0mA 40
-
--
-
IC = -10mA 40
IC = -150mA 40
IC = -500mA 25
VCE(sat)
(1)
Collector-Emitter Saturation
Voltage IC = -150mA IB = -15mA
-0.4
V
VBE(sat)
(1)
Base-Emitter Saturation
Voltage
IC = -30mA IB = -1.0mA
-0.9
IC = -150mA IB = -15mA
-1.3
DYNAMIC CHARACTERISTICS
Cobo Output Capacitance
VCB = -10V
IE = 0
12
pF
f = 1.0MHz
Cibo Input Capacitance
VEB = -2V IC = 0
30
f = 1.0MHz
fT Transition Frequency
VCE = -10V IC = -50mA
100 MHz
f = 100MHz
Notes
NotesNotes
Notes
(1) Pulse Width ≤ 380us, δ ≤ 2%
SILICON PLANAR EPITAXIAL
PNP TRANSISTOR
BFX87
Semelab Limited
Semelab LimitedSemelab Limited
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com
Document Number
10300
Issue
1
Page 3 of
3
MECHANICAL DATA
Dimensions in mm (inches)
TO
-
39 (TO
-
205AD) METAL PACKAGE
Underside View
Pin 1 - Emitter Pin 2 - Base Pin 3 - Collector
0.89
(0.035)max.
12.70
(0.500)
min. 0.41 (0.016)
0.53 (0.021)
dia.
5.08 (0.200)
typ.
0.71 (0.028)
0.86 (0.034)
2.54
(0.100)
45°
6.10 (0.240)
6.60 (0.260)
8.51 (0.34)
9.40 (0.37)
7.75 (0.305)
8.51 (0.335)
123
0.74 (0.029)
1.14 (0.045)
