PW Series Solder/Bayonet Coupling Connectors MIL-C-26482, Series I Commercial & Military QPL'd belfuse.com/cinch PRODUCT INDEX Solder/Bayonet Coupling Connectors Commercial and MIL-C-26482, Series I Contents Product Data Product Series 3 Series PW00/MS3110 Wall Mount Receptacle 8 Polarization3 Series PW01/MS3111 In-Line Receptacle 9 Nomenclature Guide 4 Series PW02/MS3112 Box Mount Receptacle 10 Cross Reference 4 Series PW07/MS3114 Jam Nut Receptacle 11 Contact Arrangements 5 Series PW07A/C Jam Nut Receptacle 12 Panel Mounting Data 6 Series PW06/MS3116 Straight Plug 13 Printed Circuit Termination 7 Series PW08 900Angle Plug 14 Series PW09 Flange Mount Plug 15 Series PWB Thru-Bulkhead Receptacle (MS3119 Military) 16 PW80/MS3180 and PW81/MS3181 Protective Caps 17 Contact Locations 18 Features Cinch's "MS" series connectors meet or exceed all of the requirements for qualifica-tion to MIL-C-26482 Series I Solder and are listed in the U.S. Government's Qualified Product List. They are available in nine shell sizes and over thirty insert arrangements with both pin or socket contacts. Shells and hardware are made of high strength aluminum alloys, cadmium plated with a chromate overplate as standard. Shells are provided with five keyways to insure proper alignment when mated. Mated shells are held together by three bayonet pins on receptacles and bayonet locking coupling nuts on plugs. These provide visual and audible confirmation of complete mating. All "PW/MS" receptacle and plug connectors can be ordered with pin or socket con-tacts. Contact sizes are 20, 16, and 12 gauge, available with either solder cup or PC tail termination. Contacts are made of copper alloy, gold plated per MIL-G-45204, with closed entry design for socket contacts. Many special features are available such as electroless nickel or colored anodized fin-ish, stainless steel shells, clinch nuts, Viton or silicone inserts. For modifications or materials not shown in the catalog, contact your Cinch sales representative. Cinch Connectivity Solutions produces high quality products. These products are intended to be used in accordance with the specifications described in this catalog. Any use or application that devi-ates from the stated operating specifications is not recommended and may be unsafe. A limited warranty is applicable. Except for obligations assumed by Cinch Connectivity Solutions under warranty, Cinch will be not be liable for any loss, damage, repairs, incidental or consequential damages of any kind, whether or not based upon expressed or implied warranty, contract, negligence, or liability arising from the application or manufacture or repair of these products. This catalog is not a contractual offering; it is for informational purposes only. to MIL-C-26482 Series 1 Solder. Nine shell sizes are available and over thirty insert arrangements with both pin and socket contacts. PW00/MS3110 PW01/MS3111 PW06/MS3116 PW07A Jam Nut Receptacle (General Duty) Jam Nut Receptacle (Environmental) PW08 PW09 PWB/MS3119 Wall Mount Receptacle Straight Plug 90 Plug In-Line Receptacle Flange Mount Plug PW02/MS3112 Box Mount Receptacle PW07/MS3114 Thru-Bulkhead Receptacle PW/MS Receptacle and Plug Connectors Cinch Connectivity Solutions manufactures an extensive line of Bayonet Coupling Connectors which meet or exceed the requirements for qualification Product Data Electrical Standard Material and Finishes Contact Termination (PW) Solder or PC Tail Number of Contacts 2 to 61 Wire Size, AWG 12 to 24 Wire Range Accomodations Insulation O.D. Limits Contact Size AWG Wire Size Min. Max. 20 24, 22 and 20 .060 (1.52) .083 (2.11) 16 20, 18 and 16 .066 (1.68) .109 (2.77) 12 14 and 12 .097 (2.46) .142 (3.61) Contact Rating Contact Size Rated Amps Test current Max. Millivolt Drop 20 7.5 7.5 55 16 13.0 13.0 49 12 23.0 23.0 42 Service Rating Test Voltage Max. Working Voltage AC(rms) DC AC(rms) DC 1 1500 2100 600 850 2 2300 3200 1000 1400 1 375 535 300 510 2 500 770 450 740 Sea Level 70,000 ft. Aluminum alloy, conductive olivedrab chromate over cadmiumfinish per QQ-P-416. (Consultfactory for commercial options.) Insulator Synthetic rubber Grommet and Seal Synthetic rubber Contacts Copper alloy, gold plate over nickel Temperature Range -55C to +125C Mechanical 00- Wall mount receptacle 01- Cable in line receptacle 02- Box mount receptacle 06- Straight plug 07- Jam nut receptacle 08- 90 Angle plug 09- Flange mount plug PWB - Thru-bulkhead receptacle 8 thru 24 Five keyway/three point bayonet A- General duty B- General duty with strain relief C- Pressurized commercial "PW" only E- Grommet seal F- Grommet seal with strain relief J- Straight backshell see note* JF- Commercial only N- No back end, no termination hardware P- Potted W- Moisture resistant with gland seal * MS- Includes "F" strain relief * PW- Commercial "E" type endbell Shell Styles Voltage Rating Altitude Shell (Mil-Std) Shell Size Polarization/Coupling Service Classes Engaging FacePin Inserts Polarization The diagrams indicate alternate insert positions. The five positions (W, X, Y, Z and Normal) differ in degree of rotation for various size and layouts. The exact angle of rotation for the combinations are listed in the table below. Position N (Normal) Shell Size Layout 8 10 12 14 4 2 3 4 33 6 98 3 8 10 14 5 8 12 15 18 19 22 Position W 58 60 45 90 90 90 90 60 40 43 17 15 30 45 X 122 210 180 112 155 92 90 110 90 165 - Y 240 180 203 270 184 155 180 315 - Z 270 292 295 273 234 270 - Shell Size Layout 16 18 20 22 24 8 23 26 11 32 16 24 27 39 41 21 41 55 61 Position W 54 158 60 62 85 238 70 72 63 45 16 39 30 90 X 152 270 119 138 318 145 144 144 126 135 135 142 180 Y 180 275 241 222 333 215 216 252 225 175 264 226 270 Z 331 338 340 265 347 290 288 333 349 314 324 Note: For polarization data for the other contact arrangements, consult factory. Nomenclature Guide Example #1 #2 #3 PW PW MS 06 *6 3116 E E E 222222- 55 55 55 P P P C C Y Y Y MODIFICATION CODES A602 = Black Anodize Plating A610 = Aluminate Plating A611 = Nickel Plating A612 = Electroless Nickel Plating A617 = Tin Plating F602 = Clinch Nuts M901 = Stainless Steel Construction SERIES PREFIX PW = Cinch MS = MILITARY SHELL STYLE 00 = wall mount receptacle 01 = in-line receptacle 02 = box mount receptacle 06 = straight plug 07 = jam nut receptacle 08 = 90 plug 09 = flange mount plug PWB = thru-bulkhead receptacle SERVICE TYPE (Class) A = general duty B = general duty with strain relief C = pressurized (commercial) E = grommet seal F = same as E with strain relief K001** CONTACT ARRANGEMENT (See page 5) ** For modification codes not listed, consult factory. SHELL SIZE 8 thru 24 available POLARIZATION (See Chart, page 3) J JF P N = straight backshell see note** = commercial only = potting shell = no back end, threaded with no cable termination hardware W = moisture resistant with gland seal **MS= includes "F" strain relief **PW= commercial "E" type endbell INDUSTRIAL CRIMP CONTACT TYPE P= pins S = sockets *NOTE: When modification to a standard plug or receptacle is required, delete the "0" between the PW and the "6" as in example #2. Cross Reference MIL SPEC PART NOs. MS3110A*** MS3110B*** MS3110E* MS3110F* MS3110P* MS3110J* ~~~~~ MS3111A*** MS3111B*** MS3111E* MS3111F* MS3111P* MS3111J* ~~~~~ MS3112A*** MS3112E* ~~~~~ MS3114E* MS3114F* MS3114P* MS3116A*** MS3116B*** MS3116E* MS3116F* MS3116P* MS3116J* ~~~~~ MS3119E* ~~~~~ ~~~~~ ~~~~~ LEADING SUPPLIERS' COMMERCIAL EQUIVALENT Cinch AMPHENOL-BENDIX CANNON FCI/BURNDY SOURIAU PW00A* PW00B* PW00E* PW00F* PW00P* PW00JF* PW00J* PW01A* PW01B* PW01E* PW01F* PW01P* PW01JF* PW01J* PW02A* PW02E* PW07A* PW07E* PW07F* PW07P* PW06A* PW06B* PW06E* PW06F* PW06P* PW06JF* PW06J* PWB* PW08E* PW08F* PW09N* PT00A* PT00A**(SR) PT00E* PT00E**(SR) PT00P* ~~~~~ PT00W* PT01A* PT01A**(SR) PT01E* PT01E**(SR) PT01P* ~~~~~ PT01W* PT02A* PT02E* PT07A* PT07E* PT07E**(SR) PT07P* PT06A* PT06A**(SR) PT06E* PT06E**(SR) PT06P* ~~~~~ PT06W* PTB* PT08E* PT08E**(SR) PT09E* KPT00A* KPT00B* KPT00E* KPT00F* KPT00P* KPT00J* ~~~~~ KPT01A* KPT01B* KPT01E* KPT01F* KPT01P* KPT01J* ~~~~~ KPT02A* KPT02E* KPT07A* KPT07E* KPT07F* KPT07P* KPT06A* KPT06B* KPT06E* KPT06F* KPT06P* KPT06J* ~~~~~ KPTB* KPT08E* KPT08F* ~~~~~ BT00A* BT00AC* BT00E* BT00EC* BT00P* BT00JF* BT00J* BT01A* BT01AC* BT01E* BT01EC* BT01P* BT01JF* BT01J* BT02A* BT02E* BT07A* BT07E* BT07EC* BT07P* BT06A* BT06AC* BT06E* BT06EC* BT06P* BT06JF* BT06J* ~~~~~ ~~~~~ ~~~~~ ~~~~~ 851-00A*50* 851-0AC*50 851-0E*50 851-0EC*50 851-0P*50 851-00JC*50 851-00J*50 851-01A*50 851-01AC* 851-01E*50 851-01EC*50 851-01P*50 851-01JC*50 851-01J*50 851-02A*50 851-02E*50 851-07A*50 851-07E*50 851-07EC*50 851-07P*50 851-06A*50 851-06AC*50 851-06E*50 851-06EC*50 851-06P*50 851-06JC*50 851-06J*50 ~~~~~ 851-08E*50 851-08EC*50 851-09E*50 ***Obsolete for new design but still available. **Insert Arrangement. +1 305.234.1000 cinch.com 5 Contact Arrangement (Engaging Face of Pin Insert) (For contact arrangements not shown, contact factory) 08 10 12 14 16 18 20 22 24 6 **Commercial arrangement. Available with solder or straight PC contacts. MIL-C-26482 Series 1 Contact arrangements, per MIL-STD-1669. * Consult with factory. Panel Mounting Data Max Panel & Screw Heads SHELL SIZE PW00 PW02 PWB 0.087 0.087 0.218 0.212 0.212 8 10 12 14 16 18 20 22 0.344 24 Front Panel Mounting Rear Panel Mounting 0.311 Note: All dimensions relate to distance in front of flange required for proper mating. Series PW Panel Cutout Dimensions Wall & Box Mounting Receptacle 00, 02 .125.005 DIA. FOR SIZES 8 - 22 .155 .005 DIA. FOR SIZE 24 Square flange PW receptacles are nor-mally front panel mounted, using dimensions indicated. Hole location "R" is true position and is located within .005 dia. of (TP). When back panel mounting, provision must be made for bayonet pin and coupling clearance. Jam Nut Receptacle 07 PW jam nut receptacles are rear panel mounted in a "D" shaped mount-ing hole. Minimum panel thickness is .062", maximum is .125" for sizes 8 through 18 and .250" for sizes 20 through 24. INCHES MILLIMETERS A R A 8 .479 .594 12.17 15.08 10 .603 .719 15.32 18.28 12 .730 .812 18.54 20.61 14 .855 .906 21.72 23.00 16 .979 .969 24.87 24.60 18 1.103 1.062 28.02 27.00 20 1.223 1.156 30.56 29.36 22 1.350 1.250 33.78 31.75 24 1.475 1.375 36.96 33.98 SHELL SIZE R INCHES MILLIMETERS A R A 8 .572 .540 14.53 13.72 10 .697 .665 17.70 16.90 12 .885 .828 22.45 21.03 14 1.010 .952 25.67 24.20 16 1.135 1.076 28.87 27.35 18 1.260 1.201 32.00 30.75 20 1.385 1.326 35.18 33.65 22 1.510 1.451 38.35 36.83 24 1.635 1.576 41.50 40.00 SHELL SIZE R +1 305.234.1000 cinch.com 7 Printed Circuit Termination Note: to define PC tail length(s), specify either "L" or "M" and "G" dimensions. Recommended PC Tail Diameter "G" CONTACT SIZE DIAMETER 16 gauge .040 20 gauge .030 Other dimensions available. Consult with factory PW02 (Any Class) PW07 (A and C Class only) PW07 - Shell Dimensions PW02 - Shell Dimensions SHELL SIZE C.016 D+.005 -.015 8 10 12 14 16 18 20 22 24 .062 .062 .062 .062 .062 .062 .094 .094 .094 .755 .755 .755 .755 .755 .755 1.005 1.005 1.040 Customer to Specify G.001 L M SHELL SIZE C.020 DMAX. 8 10 12 14 16 18 20 22 24 .117 .117 .117 .117 .117 .117 .148 .148 .148 .859 .859 .859 .859 .859 .859 1.078 1.078 1.111 P Customer to Specify MIN. MAX. .062 .062 .062 .062 .062 .062 .062 .062 .062 .125 .125 .125 .125 .125 .125 .250 .250 .250 G.001 L Cinch Connectivity Solutions stocks a wide range of con-tacts for printed circuit board mounting in a variety of lengths and diameters. The PC types PW02 and PW07 (with printed circuit termination) mate with all MIL-C-26482 plugs. They are competitively priced with the solder ver-sion, and a substantial savings can be realized when ter-minated by wave or reflow soldering. If you require special plating (other than cadmium) or other modifications (i.e., clinch nuts), please advise requirements. Cinch can also supply these connectors with custom flex circuitry attached. Please discuss your requirements with your local Cinch Sales Representative. 8 Combinations of different PC tail lengths can be provided. M Series PW00/MS3110 Wall Mount Receptacle Application: Wall Mounting Connector. Suggested mates are PW06/MS3116 and PW08 styles. Note: L* = Total connector length including cable accessory. Dimensions in Inches T.005 SMAX. R(Tp) A.003 M+.031 -.000 La MAX. Ljf MAX. Lj MAX. Lp MAX. Lf MAX. MAX. FREE I.D. Le MAX. MIN. CLOSED I.D. Ya MAX. Xj Yf MAX. Xp MIN. DIA. YMAX. Xf MIN. DIA. K.016 SHELL SIZE V THREAD CLASS 2A V V THREAD CLASS 2A 8 .234 .317 .168 .230 .062 .608 .828 .590 1.281 1.844 1.453 1.781 2.271 1.554 .431 .471 .594 .828 .120 1/2-28 UNEF 7/16-28 UNEF 10 .297 .434 .205 .312 .062 .734 .891 .717 1.281 1.844 1.453 1.781 2.271 1.554 .431 .588 .719 .954 .120 5/8-24 UNEF 9/16-24 UNEF 12 .422 .548 .338 .442 .062 .858 1.016 .834 1.281 1.844 1.453 1.921 2.411 1.554 .431 .748 .812 1.047 .120 3/4-20 UNEF 14 .547 .673 .416 .539 .062 .984 1.141 .970 1.281 1.844 1.453 2.109 2.599 1.554 .431 .873 .906 1.141 .120 16 .609 .798 .550 .616 .062 1.110 1.203 1.088 1.281 1.969 1.453 2.328 2.943 1.554 .431 .998 .969 1.234 .120 18 .734 .899 .600 .672 .062 1.234 1.469 1.216 1.281 1.969 1.453 2.562 3.172 1.554 .431 1.123 1.062 1.328 .120 20 .734 1.024 .635 .747 .094 1.360 1.469 1.332 1.531 2.234 1.672 3.000 3.610 1.771 .556 1.248 1.156 1.453 .120 22 .922 1.149 .670 .846 .094 1.484 1.656 1.460 1.531 2.234 1.672 3.156 3.766 1.771 .556 1.373 1.250 1.578 .120 24 .984 1.274 .740 .894 .094 1.610 1.750 1.585 1.594 2.297 1.734 3.375 3.985 1.834 .589 1.498 1.375 1.703 .147 11/16-24 UNEF 13/16-20 7/8-20 UNEF UNEF 15/16-20 1-20 UNEF UNEF 1 3/16-18 1 1/16-18 UNEF UNEF 1 3/16-18 1 3/16-18 UNEF UNEF 1 7/16-18 1 5/16-18 UNEF UNEF 1 7/16-18 1 7/16-18 IMEF UNEF T.127 SMAX. R(Tp) A.076 M+.787 -.000 La MAX. Ljf MAX. Lj MAX. Lp MAX. Lf MAX. MAX. FREE I.D. Le MAX. Xj MIN. CLOSED I.D. Ya MAX. Xp MIN. DIA. Yf MAX. Xf MIN. DIA. YMAX. SHELL SIZE K.406 Dimensions in Millimeters V THREAD CLASS 2A V V THREAD CLASS 2A 8 5.95 8.05 4.27 5.84 1.57 15.44 21.03 14.99 32.54 46.84 36.91 45.24 57.68 36.12 10.95 11.99 15.09 21.03 3.05 1/2-28 UNEF 7/16-28 UNEF 10 7.54 11.02 5.21 7.92 1.57 18.64 22.63 18.21 32.54 46.84 36.91 45.24 57.68 36.12 10.95 14.94 18.26 24.23 3.05 5/8-24 UNEF 9/16-24 UNEF 12 10.72 13.92 8.59 11.23 1.57 21.79 25.81 21.18 32.54 46.84 36.91 48.79 61.24 36.12 10.95 19.00 20.63 26.59 3.05 3/4-20 UNEF 11/16-24 UNEF 14 13.89 17.09 10.57 13.69 1.57 24.99 28.98 24.61 32.54 46.84 36.91 53.57 66.01 36.12 10.95 22.17 23.01 28.98 3.05 7/8-20 UNEF 13/16-20 UNEF 16 15.47 20.27 13.97 15.65 1.57 28.19 30.56 27.64 32.54 50.01 36.91 59.13 74.75 48.82 10.95 25.35 24.61 31.34 3.05 1-20 UNEF 18 18.64 22.83 15.24 17.07 1.57 31.34 37.31 30.89 32.54 50.01 36.91 65.07 80.57 48.82 10.95 28.52 26.98 33.73 3.05 20 18.64 26.01 16.13 18.97 2.39 34.54 37.31 33.83 38.89 56.74 42.47 76.20 91.69 43.26 14.12 31.70 29.36 36.91 3.05 22 23.42 29.18 17.02 21.49 2.39 37.82 42.06 37.08 38.89 56.74 42.47 80.16 65.66 43.26 14.12 34.27 31.75 40.08 3.05 24 24.99 32.36 18.80 22.71 2.39 40.89 44.45 40.26 40.49 58.34 44.04 85.73 101.22 44.83 14.96 38.05 34.93 43.26 3.73 1 3/16-18 UNEF 1 3/16-18 UNEF 1 7/16-18 UNEF 1 7/16-18 UNEF 15/16-20 UNEF 1 1/16-18 UNEF 1 3/16-18 UNEF 1 5/16-18 UNEF 1 7/16-18 UNEF +1 305.234.1000 cinch.com 9 Series PW01/MS3111 In-Line Receptacle Application: Cableto-Cable Connector. Suggested mates are PW06/MS3116 and PW08 styles. Note: L* = Total connector length including cable accessory. Dimensions in Inches SMAX. G.020 A.003 M+.031 -.000 Ljf MAX. La MAX. Lj MAX. Lp MAX. Lf MAX. Le MAX. MAX. CLOSED I.D. Ya MAX. Xp MIN. MIN. CLOSED I.D. Yf MAX. Xf MIN. K.010 SHELL SIZE YMAX. Xj V THREAD CLASS 2A V V THREAD CLASS 2A 8 .234 .317 .168 .230 .094 .608 .828 .590 1.281 1.844 1.453 1.781 1.554 2.271 .400 .471 .938 .828 1/2-28 UNEF 7/16-28 UNEF 10 .297 .434 .205 .312 .094 .734 .891 .717 1.281 1.844 1.453 1.781 1.554 2.271 .400 .588 1.062 .954 5/8-24 UNEF 9/16-24 UNEF 12 .422 .548 .338 .442 .094 .858 1.016 .834 1.281 1.844 1.453 1.921 1.554 2.411 .400 .748 1.156 1.047 3/4-20 UNEF 11/16-24 UNEF 14 .547 .673 .416 .539 .094 .984 1.141 .970 1.281 1.844 1.453 2.109 1.554 2.599 .400 .873 1.250 1.141 7/8-20 UNEF 13/16-20 UNEF 16 .609 .798 .550 .616 .094 1.110 1.203 1.088 1.281 1.969 1.453 2.328 1.554 2.943 .400 .998 1.344 1.234 1-20 UNEF 15/16-20 UNEF 18 .734 .899 .600 .672 .094 1.234 1.469 1.216 1.281 1.969 1.453 2.562 1.554 3.172 .400 1.123 1.438 1.328 1 3/16-18 UNEF 1 1/16-18 UNEF 20 .734 1.024 .635 .747 .115 1.360 1.469 1.332 1.531 2.234 1.672 3.000 1.771 3.610 .535 1.248 1.562 1.453 1 3/16-18 UNEF 1 3/16-18 UNEF 22 .922 1.149 .670 .846 .115 1.484 1.656 1.460 1.531 2.234 1.672 3.156 1.771 3.766 .535 1.373 1.688 1.578 1 7/16-18 UNEF 1 5/16-18 UNEF 24 .984 1.274 .740 .894 .115 1.610 1.750 1.585 1.594 2.297 1.734 3.375 1.834 3.985 .568 1.498 1.812 1.70 1 7/16-18 UNEF 1 7/16-18 UNEF Dimensions in Millimeters SMAX. G.508 A.076 M+.787 -.000 YMAX. MIN. MAX. CLOSED CLOSED I.D. I.D. K.254 Xj SHELL SIZE V THREAD CLASS 2A V V THREAD CLASS 2A 15.44 21.03 14.99 32.54 46.84 36.91 45.24 36.12 57.68 10.16 11.99 23.83 21.03 1/2-28 UNEF 7/16-28 UNEF 2.39 18.64 22.63 18.21 32.54 46.84 36.91 45.24 36.12 57.68 10.16 14.94 26.97 24.23 5/8-24 UNEF 9/16-24 UNEF 12 10.72 13.92 8.59 11.23 2.39 21.79 25.81 21.18 32.54 46.84 36.91 48.79 36.12 61.24 10.16 19.00 29.36 26.59 3/4-20 UNEF 11/16-24 UNEF 14 13.89 17.09 10.57 13.69 2.39 24.99 28.98 24.64 32.54 46.84 36.91 53.57 36.12 66.01 10.16 22.17 31.75 28.98 7/8-20 UNEF 13/16-20 UNEF 16 15.47 20.27 13.97 15.65 2.39 28.19 30.56 27.64 32.54 50.01 36.91 59.13 48.82 74.75 10.16 25.35 34.14 31.34 1-20 UNEF 15/16-20 UNEF 18 18.64 22.83 15.24 17.07 2.39 31.34 37.31 30.89 32.54 50.01 36.91 65.07 48.82 80.57 10.16 28.52 36.53 33.73 1 3/16-18 UNEF 1 1/16-18 UNEF 20 18.64 26.01 16.13 18.97 2.92 34.54 37.31 33.83 38.89 56.74 42.47 76.20 43.26 91.69 13.59 31.70 39.67 36.91 1 3/16-18 UNEF 1 3/16-18 UNEF 22 23.42 29.18 17.02 21.49 2.92 37.82 42.06 37.08 38.89 56.74 42.47 80.16 43.26 65.66 13.59 34.87 42.88 40.08 1 7/16-18 UNEF 1 5/16-18 UNEF 24 24.99 32.36 18.80 22.71 2.92 40.89 44.45 40.26 40.49 58.34 44.04 85.73 44.83 101.22 14.43 38.05 46.02 43.26 1 7/16-18 UNEF 1 7/16-18 UNEF 10 Ljf MAX. 2.39 7.92 La MAX. 5.84 Lj MAX. 4.27 11.02 5.21 Lp MAX. 8.05 7.54 Lf MAX. 5.94 10 Le MAX. 8 Ya MAX. Xp Yf MAX. Xf Series PW02/MS 3112 Box Mount Receptacle Application: Box Mount Receptacle. Suggested mates are PW06/MS3116 and PW08 styles. For printed circuit board terminations, see page 7. Dimensions in Inches SHELL SIZE A.003 K .010 LMAX. M+.031 -.000 N .015 R(Tp) SMAX. T .005 8 .471 .062 .978 .431 .438 .594 .828 .120 10 .588 .062 .978 .431 .558 .719 .954 .120 12 .748 .062 .978 .431 .688 .812 1.047 .120 14 .873 .062 .978 .431 .812 .906 1.141 .120 16 .998 .062 .978 .431 .938 .969 1.234 .120 18 1.123 .062 .978 .431 1.062 1.062 1.328 .120 20 1.248 .094 1.196 .556 1.188 1.156 1.453 .120 22 1.373 .094 1.196 .556 1.312 1.250 1.578 .120 24 1.498 .094 1.196 .589 1.438 1.375 1.703 .147 Dimensions in Millimeters SHELL SIZE A.076 K.254 LMAX. M+.787 -.000 N.381 R(Tp) SMAX. T.127 8 12.01 1.57 24.84 10.95 11.13 15.09 21.03 3.05 10 14.99 1.57 24.84 10.95 14.27 18.26 24.23 3.05 12 19.05 1.57 24.84 10.95 17.48 20.62 26.59 3.05 14 22.23 1.57 24.84 10.95 20.62 23.01 28.98 3.05 16 25.40 1.57 24.84 10.95 23.83 24.61 31.34 3.05 18 28.58 1.57 24.84 10.95 26.97 26.97 33.73 3.05 20 31.75 2.39 30.38 14.12 30.18 29.36 36.91 3.05 22 34.93 2.39 30.38 14.12 33.32 31.75 40.08 3.05 24 38.10 2.39 30.38 14.96 36.53 34.93 43.26 3.73 +1 305.234.1000 cinch.com 11 Series PW07/MS 3114 Jam Nut Receptacle Application: Jam Nut Mounting with O-ring to D-shaped Chassis Hole. See panel cutout dimensions on page 6. Suggested mates are PW06/MS3116 and PW08 styles. Note: L* = Total connector length including cable accessory. Dimensions in Inches .608 1.281 1.750 1.391 .691 .471 .767 .954 5/8-24 UNEF .891 .734 1.281 1.750 1.391 .691 .588 .892 1.078 3/4-20 UNEF 12 .422 .062 .125 .548 .117 1.016 .858 1.281 1.750 1.391 .691 .748 1.079 1.266 7/8-20 UNEF 14 .547 .062 .125 .673 .117 1.141 .984 1.281 1.750 1.391 .691 .873 1.205 1.391 1-20 UNEF 16 .609 .062 .125 .798 .117 1.203 1.110 1.281 1.875 1.391 .691 .998 1.329 1.516 1 1/8-18 UNEF 18 .734 .062 .125 .899 .117 1.469 1.234 1.281 1.875 1.391 .691 1.123 1.455 1.641 1 1/4-18 UNEF 20 .734 .062 .250 1.024 .148 1.469 1.360 1.531 2.125 1.641 .879 1.248 1.579 1.828 1 3/8-18 UNEF 22 .922 .062 .250 1.149 .148 1.656 1.484 1.531 2.125 1.641 .879 1.373 1.705 1.954 1 1/2-18 UNEF 24 .984 .062 .250 1.274 .148 1.750 1.610 1.593 2.187 1.703 .912 1.498 1.829 2.078 1 5/8-18 UNEF SMAX. .828 .117 AA MAX. .117 .434 A.003 .317 .125 Lp MAX. .125 .062 Lf MAX. .062 .297 Le MAX. .234 10 Yp MAX. 8 Yf MAX. MAX. K.020 MIN. Xp MIN. Xf MIN. Lp MAX. M+.031.000 P SHELL SIZE Z THREAD Dimensions in Millimeters A.076 8.05 2.97 21.03 15.44 32.53 44.45 35.33 17.55 11.99 19.48 24.23 5/8-24 UNEF 3.18 11.02 2.97 22.63 18.64 32.53 44.45 35.33 17.55 14.94 22.66 27.38 3/4-20 UNEF 12 10.72 1.57 3.18 13.92 2.97 25.81 21.79 32.53 44.45 35.33 17.55 19.00 27.41 32.16 7/8-20 UNEF 14 13.89 1.57 3.18 17.09 2.97 29.98 24.99 32.53 44.45 35.33 17.55 22.17 30.61 35.33 1-20 UNEF 16 15.47 1.57 3.18 20.27 2.97 30.56 28.19 32.53 47.63 35.33 17.55 25.35 33.76 38.51 1 1/8-18 UNEF 18 18.64 1.57 3.18 22.83 2.97 37.31 31.34 32.53 47.63 35.33 17.55 28.52 36.96 41.68 1 1/4-18 UNEF 20 18.64 1.57 6.35 26.01 3.76 37.31 34.54 38.90 53.98 41.68 22.33 31.70 40.11 46.43 1 3/8-18 UNEF 22 23.42 1.57 6.35 29.18 3.76 42.06 39.69 38.90 53.98 41.68 22.33 34.87 43.31 49.63 1 1/2-18 UNEF 24 24.99 1.57 6.35 32.36 3.76 44.45 40.89 40.50 55.55 43.26 23.16 38.05 46.46 52.78 1 5/8-18 UNEF SMAX. Z THREAD AA MAX. Xp MIN. 12 Lf MAX. 3.18 1.57 MAX. Le MAX. 1.57 7.54 MIN. Yp MAX. 5.94 Xf MIN. Yf MAX. 8 10 SHELL SIZE K.508 M+.787-.000 P Series PW07A/C Jam Nut Receptacle Application: Jam Nut Mounting with O-ring to D-shaped Chassis Hole. See panel cutout dimensions on page 6. Suggested mates are PW06/MS3116 and PW08 styles. For printed circuit terminations, see page 7. Dimensions in Inches SHELL SIZE A.003 AA MAX. K.020 M+.031 -.000 P MIN. SMAX. Z THREAD MAX. 8 .471 .767 .117 .691 .062 .125 .954 9/16-24 UNEF 10 .588 .892 .117 .691 .062 .125 1.078 11/16-24 UNEF 12 .748 1.079 .117 .691 .062 .125 1.266 7/8-20 UNEF 14 .873 1.205 .117 .691 .062 .125 1.391 1-20 UNEF 16 .998 1.329 .117 .691 .062 .125 1.516 1 1/8-18 UNEF 18 1.123 1.455 .117 .691 .062 .125 1.641 1 1/4-18 UNEF 20 1.248 1.579 .148 .879 .062 .250 1.828 1 3/8-18 UNEF 22 1.373 1.705 .148 .879 .062 .250 1.954 1 1/2-18 UNEF 24 1.498 1.829 .148 .912 .062 .250 2.078 1 5/8-18 UNEF Dimensions in Millimeters SHELL SIZE A.076 AA MAX. K.508 M.787 -.000 P MIN. MAX. 8 11.99 19.48 2.97 17.55 1.57 10 14.94 22.66 2.97 17.55 12 19.00 27.41 2.97 14 22.17 30.61 2.97 16 25.35 33.76 18 28.52 36.96 20 31.70 22 34.87 24 38.05 SMAX. Z THREAD 3.18 24.23 9/16-24 UNEF 1.57 3.18 27.38 11/16-24 UNEF 17.55 1.57 3.18 32.16 7/8-20 UNEF 17.55 1.57 3.18 35.33 1-20 UNEF 2.97 17.55 1.57 3.18 38.51 1 1/8-18 UNEF 2.97 17.55 1.57 3.18 41.68 1 1/4-18 UNEF 40.11 3.76 22.33 1.57 6.35 46.43 1 3/8-18 UNEF 43.31 3.76 22.33 1.57 6.35 49.63 1 1/2-18 UNEF 46.46 3.76 23.16 1.57 6.35 52.78 1 5/8-18 UNEF +1 305.234.1000 cinch.com 13 Series PW06/MS3116 Straight Plug Application: Straight Plug Connector; General Cable Coupling. Suggested mates are PW00/MS3110, PW01/MS3111, PW02/MS3112, PW07/MS3114 and PW09/MS3119 styles. Note: L* = Total connector length including cable accessory. Dimensions in Inches QMAX. Ljf MAX. La MAX. LjMAX. Lp MAX. Lf MAX. MAX. CLOSED I.D. Le MAX. MIN. CLOSED I.D. Ya MAX. Xp MIN. Yf MAX. Xf MIN. YMAX. Xj SHELL SIZE V THREAD VV THREAD 8 .234 .317 .168 .230 .608 .828 .590 1.281 1.828 1.500 1.781 1.609 2.271 .782 1/2-28 UNEF 7/16-28 UNEF 10 .297 .434 .205 .312 .734 .891 .717 1.281 1.828 1.500 1.781 1.609 2.271 .926 5/8-24 UNEF 9/16-24 UNEF 12 .422 .548 .338 .442 .858 1.016 .834 1.281 1.828 1.500 1.921 1.609 2.411 1.043 3/4-20 UNEF 11/16-24 UNEF 14 .547 .673 .416 .539 .984 1.141 .970 1.281 1.828 1.500 2.109 1.609 2.599 1.183 7/8-20 UNEF 13/16-20 UNEF 16 .609 .798 .550 .616 1.110 1.203 1.088 1.281 1.969 1.500 2.328 1.609 2.943 1.305 1-20 UNEF 15/16-20 UNEF 18 .734 .899 .600 .672 1.234 1.469 1.216 1.281 1.969 1.500 2.562 1.609 3.172 1.391 1 3/16-18 UNEF 1 1/16-18 UNEF 20 .734 1.024 .635 .747 1.360 1.469 1.332 1.453 2.141 1.609 3.000 1.656 3.610 1.531 1 3/16-18 UNEF 1 3/16-18 UNEF 22 .922 1.149 .670 .846 1.484 1.656 1.460 1.453 2.141 1.609 3.156 1.656 3.766 1.656 1 7/16-18 UNEF 1 5/16-18 UNEF 24 .984 1.274 .740 .894 1.610 1.750 1.585 1.510 2.219 1.687 3.375 1.750 3.985 1.777 1 7/16-18 UNEF 1 7/16-18 UNEF Dimensions in Millimeters 14 QMAX. Ljf MAX. La MAX. LjMAX. Lp MAX. Lf MAX. MAX. CLOSED I.D. Le MAX. MIN. CLOSED I.D. Ya MAX. Xp MIN. Yf MAX. Xf MIN. YMAX. Xj SHELL SIZE V THREAD VV THREAD 8 5.94 8.05 4.27 5.84 15.44 21.03 14.99 32.54 46.43 38.10 45.24 40.87 57.68 19.86 1/2-28 UNEF 7/16-28 UNEF 10 7.54 11.02 5.21 7.92 18.64 22.63 18.21 32.54 46.43 38.10 45.24 40.87 57.68 23.52 5/8-24 UNEF 9/16-24 UNEF 12 10.27 13.92 8.59 11.23 21.79 25.81 21.18 32.54 46.43 38.10 48.79 40.87 61.24 26.49 3/4-20 UNEF 11/16-24 UNEF 14 13.89 17.09 10.57 13.69 24.99 28.98 24.64 32.54 46.43 38.10 53.57 40.87 66.01 30.05 7/8-20 UNEF 13/16-20 UNEF 16 15.47 20.27 13.97 15.65 28.19 30.56 27.64 32.54 50.01 38.10 59.13 40.87 74.75 33.15 1-20 UNEF 15/16-20 UNEF 18 18.64 22.83 15.24 17.07 31.34 37.31 30.89 32.54 50.01 38.10 65.07 40.87 80.57 35.33 1 3/16-18 UNEF 1 1/16-18 UNEF 20 18.64 26.01 16.13 18.97 34.54 37.31 33.83 36.91 54.38 40.87 76.20 42.06 91.69 38.89 1 3/16-18 UNEF 1 3/16-18 UNEF 22 23.42 29.18 17.02 21.49 37.69 42.06 37.08 36.91 54.38 40.87 80.16 42.06 95.66 42.06 1 7/16-18 UNEF 1 5/16-18 UNEF 24 24.99 32.36 18.80 22.71 40.89 44.45 40.26 38.35 56.36 42.85 85.73 44.45 101.22 45.14 1 7/16-18 UNEF 1 7/16-18 UNEF Series PW08 90 Angle Plug Application: 90 Cable Plug. Suggested mates are PW00/MS3110, PW01/MS3111, PW02/MS3112, PW07/MS3114 and PW09/MS3119 styles. Note: L* = Total connector length including cable accessory. Dimensions in Inches SHELL SIZE YMAX. X THREAD CLASS 2A V THREAD CLASS 2A LREF. AREF. 8 .782 7/16-28 UNEF .5000-28 UNEF 1.644 1.157 10 .926 9/16-24 UNEF .6250-24 UNEF 1.746 1.407 12 1.043 11/16-24 UNEF .7500-20 UNEF 1.868 1.580 14 1.183 13/16-20 UNEF .8750-20 UNEF 2.060 1.703 16 1.305 15/16-20 UNEF 1.0000-20 UNEF 2.227 1.865 18 1.391 1 1/16-18 UNEF 1.1875-18 UNEF 2.440 1.978 20 1.531 1 3/16-18 UNEF 1.1875-18 UNEF 2.694 2.191 22 1.656 1 5/16-18 UNEF 1.4375-18 UNEF 2.819 2.232 24 1.777 1 7/16-18 UNEF 1.4375-18 UNEF 2.979 2.372 Dimensions in Millimeters SHELL SIZE YMAX. V THREAD CLASS 2A V THREAD CLASS 2A LREF. AREF. 8 19.86 7/16-28 UNEF .5000-28 UNEF 41.76 29.39 10 23.52 9/16-24 UNEF .6250-24 UNEF 44.35 35.74 12 26.49 11/16-24 UNEF .7500-20 UNEF 47.45 40.13 14 30.05 13/16-20 UNEF .8750-20 UNEF 52.32 43.26 16 33.15 15/16-20 UNEF 1.0000-20 UNEF 56.57 47.37 18 35.33 1 1/16-18 UNEF 1.1875-18 UNEF 61.98 50.24 20 38.89 1 3/16-18 UNEF 1.1875-18 UNEF 68.43 55.65 22 42.06 1 5/16-18 UNEF 1.4375-18 UNEF 71.60 56.69 24 45.14 1 7/16-18 UNEF 1.4375-18 UNEF 75.67 60.25 +1 305.234.1000 cinch.com 15 Series PW09 Flange Mount Plug Application: Flange Mount Plug. Suggested mate is PW01/ MS3111 style. Note: Consult with factory for PC terminated versions. Dimensions in Inches SHELL SIZE A(TP) BMAX. C.005 DMAX. L.005 MMIN. N.005 8 .594 .828 .120 .782 1.060 .014 .065 10 .719 .954 .120 .926 1.060 .014 .065 12 .812 1.047 .120 1.043 1.060 .031 .065 14 .906 1.141 .120 1.183 1.060 .031 .065 16 .969 1.234 .120 1.305 1.060 .031 .065 18 1.062 1.328 .120 1.391 1.060 .050 .065 20 1.156 1.453 .120 1.531 1.060 .050 .100 22 1.250 1.578 .120 1.656 1.060 .050 .100 24 1.375 1.703 .147 1.777 1.060 .050 .100 Dimensions in Millimeters 16 SHELL SIZE A(TP) BMAX. C.127 DMAX. L.762 MMIN. N.127 8 15.09 21.03 3.05 19.86 26.92 .36 1.65 10 18.26 24.23 3.05 23.52 26.92 .36 1.65 12 20.62 26.59 3.05 26.49 26.92 .79 1.65 14 23.01 28.98 3.05 30.05 26.92 .79 1.65 16 24.61 31.34 3.05 33.15 26.92 .79 1.65 18 26.97 33.73 3.05 35.33 26.92 1.27 1.65 20 29.36 36.91 3.05 38.39 26.92 1.27 2.54 22 31.75 40.08 3.05 42.06 26.92 1.27 2.54 24 34.93 43.26 3.73 45.14 26.92 1.27 2.54 Series PWB Thru-Bulkhead Receptacle/(MS3119 Commercial) Application: Thru-Bulkhead. Suggested mates are PW06/ MS3116 and PW08 styles. The socket end of the insert always appears at the "M" dimension end of shell. Dimensions in Inches SHELL SIZE AMAX. BTP D.003 G.016 LMAX. M+.031 -.000 T.005 8 .828 .594 .471 .062 1.125 .562 .120 10 .954 .719 .588 .062 1.125 .562 .120 12 1.047 .812 .748 .062 1.125 .562 .120 14 1.141 .906 .873 .062 1.125 .562 .120 16 1.234 .969 .998 .062 1.125 .562 .120 18 1.328 1.062 1.123 .062 1.125 .562 .120 20 1.453 1.156 1.248 .094 1.406 .688 .120 22 1.578 1.250 1.373 .094 1.406 .688 .120 24 1.703 1.375 1.498 .094 1.406 .688 .147 Dimensions in Millimeters SHELL SIZE AMAX. BTP D.076 G.406 LMAX. M+.787 -.000 T.127 8 21.03 15.09 11.96 1.57 25.58 14.27 3.05 10 24.23 18.26 14.94 1.57 25.58 14.27 3.05 12 26.59 20.62 19.00 1.57 25.58 14.27 3.05 14 28.98 23.01 22.17 1.57 25.58 14.27 3.05 16 31.34 24.61 25.35 1.57 25.58 14.27 3.05 18 33.73 26.97 28.52 1.57 25.58 14.27 3.05 20 36.91 29.36 31.70 2.39 35.71 17.48 3.05 22 40.08 31.75 34.87 2.39 35.71 17.48 3.05 24 43.26 34.93 38.05 2.39 35.71 17.48 3.73 +1 305.234.1000 cinch.com 17 PW80/MS3180 and PW81/MS3181 Protective Caps (MS 3180) Dimensions in Inches 8 DASH NO. A F +.001 WITHOUT WITH MAX. CHAIN CHAIN -.005 G1 G11 .473 .719 3.00 .562 .378 10 G2 G12 .590 .844 3.00 .562 .378 12 G3 G13 .750 1.000 3.50 .562 .378 14 G4 G14 .875 1.125 3.50 .562 .378 16 G5 G15 1.000 1.250 3.50 .562 .378 18 G6 G16 1.125 1.375 3.50 .562 .378 20 G7 G17 1.250 1.500 4.00 .625 .440 22 G8 G18 1.375 1.625 4.00 .625 .440 24 G9 G19 1.500 1.750 4.00 .658 .473 SHELL SIZE Part No. PW80-** or MS3180-** **= "Dash Number" L MAX. M .010 Dimensions in Millimeters 8 DASH NO. A +.03 WITHOUT WITH CHAIN CHAIN -.13 G1 G11 12.01 18.28 76.20 14.27 9.60 10 G2 G12 14.98 21.41 76.20 14.27 9.60 12 G3 G13 19.05 25.40 88.90 14.27 9.60 14 G4 G14 22.21 28.58 88.90 14.27 9.60 16 G5 G15 25.40 31.75 88.90 14.27 9.60 18 G6 G16 28.58 34.93 88.90 14.27 9.60 20 G7 G17 31.75 38.10 101.60 15.87 11.17 22 G8 G18 34.93 41.28 101.60 15.87 11.17 24 G9 G19 38.10 44.45 101.60 16.71 12.01 SHELL SIZE (MS 3181) H .25 F MAX. H 6.35 L MAX. M .25 Dimensions in Inches DASH NO. SHELL WITHOUT SIZE CHAIN 8 10 12 14 16 18 20 22 24 G1 G2 G3 G4 G5 G6 G7 G8 G9 WITH CHAIN & WASHER G21 G22 G23 G24 G25 G26 G27 G28 G29 WITH CHAIN G11 G12 G13 G14 G15 G16 G17 G18 G19 H 3.00 3.00 3.50 3.50 3.50 3.50 4.00 4.00 4.00 L MAX. .562 .562 .562 .562 .562 .562 .562 .562 .602 N MIN. .578 .703 .891 1.016 1.141 1.266 1.391 1.516 1.641 Q MAX. .719 .812 1.000 1.125 1.250 1.375 1.500 1.625 1.750 Dimensions in Millimeters DASH NO. SHELL WITHOUT SIZE CHAIN Part No. PW81-** or MS3181-** **= "Dash Number" 18 8 10 12 14 16 18 20 22 24 G1 G2 G3 G4 G5 G6 G7 G8 G9 WITH CHAIN G11 G12 G13 G14 G15 G16 G17 G18 G19 WITH CHAIN & WASHER G21 G22 G23 G24 G25 G26 G27 G28 G29 H 76.20 76.20 88.90 88.90 88.90 88.90 101.60 101.60 101.60 L MAX. 14.27 14.27 14.27 14.27 14.27 14.27 14.27 14.27 15.29 N MIN. 14.68 17.86 22.63 25.80 28.98 32.15 35.33 38.50 41.68 Q MAX. 18.26 20.64 25.40 28.58 31.75 34.93 38.10 41.28 44.45 Other Quality Connectors QPL'd MIL-C-5015 & Special Connectors for Commercial Applications Dura-Con Microminiature-D Connectors QPL'd MIL-C-26482 Series I Quick Disconnect Connectors Solder and Crimp Connectors Solder and Crimp Types Buffet/Galley Connectors Expanded Beam Fiber Optics Solder and Crimp Connectors Filtered Connectors Solder and Crimp Connectors Omega MIL-C-26500 - Cylindrical Connectors Special Cryogenic Connectors Rugged Acme Thread Connectors for Industrial Electrical Equipment +1 305.234.1000 cinch.com 19 About Cinch Proven Excellence In operation since 1917, Cinch supplies high quality, high performance connectors and cables globally to the Aerospace, Military/Defense, Commercial Transportation, Oil & Gas, High End Computer, and other markets. We provide custom solutions with our creative, hands on engineering and end to end approach. Our diverse product offerings include: connectors, enclosures and cable assemblies utilizing multiple contact technologies including copper and fiber optics. Our product engineering and development activities employ cutting edge technologies for design and modeling, and our various technologies and expertise enable us to deliver custom solutions and products for our strategic partnerships. We also serve a broad range of commercial markets, largely through our highly efficient distribution network. We aim to exceed our customer's expectations, and to continually provide innovative solutions to the rapidly changing needs of the markets, and customers, we serve. Asia Pacific +86 21 5442 7668 ccs.asia.sales@as.cinch.com Europe, Middle East & Africa +44 (0) 1245 342060 CinchConnectivity@eu.cinch.com North America +1 507.833.8822 ccsorders@us.cinch.com belfuse.com/cinch