PW Series
Solder/Bayonet Coupling
Connectors
MIL-C-26482, Series I Commercial
& Military QPL’d
belfuse.com/cinch
PRODUCT INDEX
Solder/Bayonet Coupling Connectors
Commercial and MIL-C-26482, Series I
Contents
Product Data 3
Polarization 3
Nomenclature Guide 4
Cross Reference 4
Contact Arrangements 5
Panel Mounting Data 6
Printed Circuit Termination 7
Product Series
Series PW00/MS3110 Wall Mount Receptacle 8
Series PW01/MS3111 In-Line Receptacle 9
Series PW02/MS3112 Box Mount Receptacle 10
Series PW07/MS3114 Jam Nut Receptacle 11
Series PW07A/C Jam Nut Receptacle 12
Series PW06/MS3116 Straight Plug 13
Series PW08 900Angle Plug 14
Series PW09 Flange Mount Plug 15
Series PWB Thru-Bulkhead Receptacle (MS3119 Military) 16
PW80/MS3180 and PW81/MS3181 Protective Caps 17
Contact Locations 18
Cinch Connectivity Solutions produces high quality products. These products are intended to be used in accordance
with the specications described in this catalog. Any use or application that devi-ates from the stated operating
specications is not recommended and may be unsafe. A limited warranty is applicable. Except for obligations
assumed by Cinch Connectivity Solutions under warranty, Cinch will be not be liable for any loss, damage, repairs,
incidental or consequential damages of any kind, whether or not based upon expressed or implied warranty,
contract, negligence, or liability arising from the application or manufacture or repair of these products. This catalog
is not a contractual offering; it is for informational purposes only.
Features
Cinch’s “MS” series connectors meet or exceed all of the requirements for qualica-tion to MIL-C-26482 Series I
Solder and are listed in the U.S. Government’s Qualied Product List. They are available in nine shell sizes and over
thirty insert arrangements with both pin or socket contacts.
Shells and hardware are made of high strength aluminum alloys, cadmium plated with a chromate overplate as
standard. Shells are provided with ve keyways to insure proper alignment when mated. Mated shells are held
together by three bayonet pins on receptacles and bayonet locking coupling nuts on plugs. These provide visual and
audible conrmation of complete mating.
All “PW/MS” receptacle and plug connectors can be ordered with pin or socket con-tacts. Contact sizes are 20, 16,
and 12 gauge, available with either solder cup or PC tail termination. Contacts are made of copper alloy, gold plated
per MIL-G-45204, with closed entry design for socket contacts.
Many special features are available such as electroless nickel or colored anodized n-ish, stainless steel shells,
clinch nuts, Viton or silicone inserts. For modications or materials not shown in the catalog, contact your Cinch
sales representative.
PW/MS Receptacle and Plug Connectors
Cinch Connectivity Solutions
manufactures an extensive line of
Bayonet Coupling Connectors which
meet or exceed the requirements for
qualication
to MIL-C-26482 Series 1 Solder.
Nine shell sizes are available and
over thirty insert arrangements with
both pin and socket contacts.
PW00/MS3110
Wall Mount Receptacle
PW06/MS3116
Straight Plug
PW01/MS3111
In-Line Receptacle
PW07A
Jam Nut Receptacle
(General Duty)
PW08
90° Plug
PW09
Flange Mount Plug
PW02/MS3112
Box Mount Receptacle
PW07/MS3114
Jam Nut Receptacle (En-
vironmental)
PWB/MS3119
Thru-Bulkhead
Receptacle
4
Contact Termination (PW) Solder or PC Tail
Number of Contacts 2 to 61
Wire Size, AWG 12 to 24
Wire Range Accomodations Insulation O.D. Limits
Contact Size AWG Wire Size Min.Max.
20 24, 22 and 20 .060 (1.52) .083 (2.11)
16 20, 18 and 16 .066 (1.68) .109 (2.77)
12 14 and 12 .097 (2.46) .142 (3.61)
Contact Rating
Contact Size Rated Amps Test current Max. Millivolt Drop
20 7.5 7.5 55
16 13.0 13.0 49
12 23.0 23.0 42
Voltage Rating
Altitude Service
Rating
Test Voltage Max. Working Voltage
AC(rms) DC AC(rms) DC
Sea Level 1 1500 2100 600 850
2 2300 3200 1000 1400
70,000 ft. 1 375 535 300 510
2 500 770 450 740
Shell (Mil-Std)
Aluminum alloy, conductive olivedrab
chromate over cadmiumnish per
QQ-P-416. (Consultfactory for
commercial options.)
Insulator Synthetic rubber
Grommet and Seal Synthetic rubber
Contacts Copper alloy, gold plate over nickel
Temperature Range -55ºC to +125ºC
Shell Styles
00- Wall mount receptacle
01- Cable in line receptacle
02- Box mount receptacle
06- Straight plug
07- Jam nut receptacle
08- 90º Angle plug
09- Flange mount plug
PWB - Thru-bulkhead receptacle
Shell Size 8 thru 24
Polarization/Coupling Five keyway/three point bayonet
Service
Classes
A- General duty
B- General duty with strain relief
C- Pressurized commercial “PW” only
E- Grommet seal
F- Grommet seal with strain relief
J- Straight backshell see note*
JF- Commercial only
N- No back end, no termination hardware
P- Potted
W- Moisture resistant with gland seal
* MS- Includes “F” strain relief
* PW- Commercial “E” type endbell
Shell Size Layout Position
W X Y Z
8
2 58º 122º - -
3 60º 210º - -
4 45º - - -
33 90º - - -
10 6 90º - - -
98 90º 180º 240º 270º
12
3 - - 180º -
8 90º 112º 203º 292º
10 60º 155º 270º 295º
14 - - - -
14
5 40º 92º 184º 273º
8----
12 43º 90º - -
15 17º 110º 155º 234º
18 15º 90º 180º 270º
19 30º 165º 315º -
22 45º - - -
Shell Size Layout Position
W X Y Z
16
8 54º 152º 180º 331º
23 158º 270º - -
26 60º - 275º 338º
18 11 62º 119º 241º 340º
32 85º 138º 222º 265º
20
16 238º 318º 333º 347º
24 70º 145º 215º 290º
27 72º 144º 216º 288º
39 63º 144º 252º 333º
41 45º 126º 225º -
22
21 16º 135º 175º 349º
41 39º 135º 264º -
55 30º 142º 226º 314º
24 61 90º 180º 270º 324º
Engaging Face-
Pin Inserts
Position N
(Normal)
Electrical
Product Data
Standard Material and Finishes
Mechanical
Polarization
The diagrams indicate alternate insert positions. The ve positions (W, X, Y, Z and Normal) differ in degree of rotation for various size
and layouts. The exact angle of rotation for the combinations are listed in the table below.
Note: For polarization data for the other contact arrangements,
consult factory.
+1 305.234.1000
cinch.com
5
MIL SPEC PART NOs.
LEADING SUPPLIERS’ COMMERCIAL EQUIVALENT
Cinch AMPHENOL-BENDIX CANNON FCI/BURNDY SOURIAU
MS3110A*** PW00A* PT00A* KPT00A* BT00A* 851-00A*50*
MS3110B*** PW00B* PT00A**(SR) KPT00B* BT00AC* 851-0AC*50
MS3110E* PW00E* PT00E* KPT00E* BT00E* 851-0E*50
MS3110F* PW00F* PT00E**(SR) KPT00F* BT00EC* 851-0EC*50
MS3110P* PW00P* PT00P* KPT00P* BT00P* 851-0P*50
MS3110J* PW00JF* ~~~~~ KPT00J* BT00JF* 851-00JC*50
~~~~~ PW00J* PT00W* ~~~~~ BT00J* 851-00J*50
MS3111A*** PW01A* PT01A* KPT01A* BT01A* 851-01A*50
MS3111B*** PW01B* PT01A**(SR) KPT01B* BT01AC* 851-01AC*
MS3111E* PW01E* PT01E* KPT01E* BT01E* 851-01E*50
MS3111F* PW01F* PT01E**(SR) KPT01F* BT01EC* 851-01EC*50
MS3111P* PW01P* PT01P* KPT01P* BT01P* 851-01P*50
MS3111J* PW01JF* ~~~~~ KPT01J* BT01JF* 851-01JC*50
~~~~~ PW01J* PT01W* ~~~~~ BT01J* 851-01J*50
MS3112A*** PW02A* PT02A* KPT02A* BT02A* 851-02A*50
MS3112E* PW02E* PT02E* KPT02E* BT02E* 851-02E*50
~~~~~ PW07A* PT07A* KPT07A* BT07A* 851-07A*50
MS3114E* PW07E* PT07E* KPT07E* BT07E* 851-07E*50
MS3114F* PW07F* PT07E**(SR) KPT07F* BT07EC* 851-07EC*50
MS3114P* PW07P* PT07P* KPT07P* BT07P* 851-07P*50
MS3116A*** PW06A* PT06A* KPT06A* BT06A* 851-06A*50
MS3116B*** PW06B* PT06A**(SR) KPT06B* BT06AC* 851-06AC*50
MS3116E* PW06E* PT06E* KPT06E* BT06E* 851-06E*50
MS3116F* PW06F* PT06E**(SR) KPT06F* BT06EC* 851-06EC*50
MS3116P* PW06P* PT06P* KPT06P* BT06P* 851-06P*50
MS3116J* PW06JF* ~~~~~ KPT06J* BT06JF* 851-06JC*50
~~~~~ PW06J* PT06W* ~~~~~ BT06J* 851-06J*50
MS3119E* PWB* PTB* KPTB* ~~~~~ ~~~~~
~~~~~ PW08E* PT08E* KPT08E* ~~~~~ 851-08E*50
~~~~~ PW08F* PT08E**(SR) KPT08F* ~~~~~ 851-08EC*50
~~~~~ PW09N* PT09E* ~~~~~ ~~~~~ 851-09E*50
***Obsolete for new design but still available. **Insert Arrangement.
Nomenclature Guide
*NOTE: When modication to a standard plug or receptacle is required, delete the “0” between the PW and the “6” as in example #2.
SERIES
PREFIX
PW = Cinch
MS = MILITARY
SHELL STYLE
00 = wall mount receptacle
01 = in-line receptacle
02 = box mount receptacle
06 = straight plug
07 = jam nut receptacle
08 = 90º plug
09 = ange mount plug
PWB = thru-bulkhead receptacle
SERVICE TYPE (Class)
A = general duty
B = general duty with strain relief
C = pressurized (commercial)
E = grommet seal
F = same as E with strain relief
J = straight backshell see note**
JF = commercial only
P = potting shell
N = no back end, threaded with no cable termi-
nation hardware
W = moisture resistant with gland seal
**MS = includes “F” strain relief
**PW = commercial “E” type endbell
SHELL SIZE
8 thru 24 available
CONTACT
ARRANGEMENT
(See page 5)
CONTACT TYPE
P= pins
S = sockets
Example PW
PW
MS
06
*6
3116
E
E
E
22-
22-
22-
55
55
55
P
P
P
C
C
Y
Y
Y
K001**
MODIFICATION CODES
A602 = Black Anodize Plating
A610 = Aluminate Plating
A611 = Nickel Plating
A612 = Electroless Nickel
Plating
A617 = Tin Plating
F602 = Clinch Nuts
M901 = Stainless Steel Con-
struction
** For modication codes not listed,
consult factory.
POLARIZATION
(See Chart, page 3)
INDUSTRIAL CRIMP
#1
#2
#3
Cross Reference
6
(For contact arrangements not shown, contact factory)
08
10
12
14
16
18
20
22
24
** Commercial arrangement.
Available with solder or straight PC contacts.
º MIL-C-26482 Series 1 Contact arrangements, per MIL-STD-1669.
* Consult with factory.
Contact Arrangement (Engaging Face of Pin Insert)
+1 305.234.1000
cinch.com
7
SHELL SIZE PW00 PW02 PWB
8
0.087 0.087 0.218
10
12
14
16
18
20
0.212 0.212
0.344
22
24 0.311
SHELL
SIZE
INCHES MILLIMETERS
A R A R
8.479 .594 12.17 15.08
10 .603 .719 15.32 18.28
12 .730 .812 18.54 20.61
14 .855 .906 21.72 23.00
16 .979 .969 24.87 24.60
18 1.103 1.062 28.02 27.00
20 1.223 1.156 30.56 29.36
22 1.350 1.250 33.78 31.75
24 1.475 1.375 36.96 33.98
SHELL
SIZE
INCHES MILLIMETERS
A R A R
8.572 .540 14.53 13.72
10 .697 .665 17.70 16.90
12 .885 .828 22.45 21.03
14 1.010 .952 25.67 24.20
16 1.135 1.076 28.87 27.35
18 1.260 1.201 32.00 30.75
20 1.385 1.326 35.18 33.65
22 1.510 1.451 38.35 36.83
24 1.635 1.576 41.50 40.00
.125±.005 DIA.
FOR SIZES 8 - 22
.155± .005 DIA.
FOR SIZE 24
Wall & Box Mounting
Receptacle 00, 02
Square ange PW receptacles are
nor-mally front panel mounted,
using dimensions indicated. Hole
location “R” is true position and
is located within .005 dia. of (TP).
When back panel mounting,
provision must be made for bayonet
pin and coupling clearance.
Jam Nut Receptacle 07
PW jam nut receptacles are rear
panel mounted in a “D” shaped
mount-ing hole. Minimum panel
thickness is .062”, maximum is
.125” for sizes 8 through 18 and
.250” for sizes 20 through 24.
Panel Mounting Data
Front Panel Mounting Rear Panel Mounting
Max Panel & Screw Heads
Note: All dimensions relate to distance in front of ange required
for proper mating.
Series PW Panel Cutout Dimensions
8
CONTACT SIZE DIAMETER
16 gauge .040
20 gauge .030
SHELL
SIZE C±.020 DMAX.
P Customer to Specify
MIN. MAX. G±.001 L M
8 .117 .859 .062 .125
10 .117 .859 .062 .125
12 .117 .859 .062 .125
14 .117 .859 .062 .125
16 .117 .859 .062 .125
18 .117 .859 .062 .125
20 .148 1.078 .062 .250
22 .148 1.078 .062 .250
24 .148 1.111 .062 .250
SHELL
SIZE C±.016 D+.005
-.015
Customer to Specify
G±.001 L M
8 .062 .755
10 .062 .755
12 .062 .755
14 .062 .755
16 .062 .755
18 .062 .755
20 .094 1.005
22 .094 1.005
24 .094 1.040
Combinations of different PC tail lengths can be provided.
Note: to dene PC tail length(s), specify
either “L” or “M” and “G” dimensions.
PW02 - Shell Dimensions
Recommended PC
Tail Diameter “G”
Cinch Connectivity Solutions stocks a wide range of
con-tacts for printed circuit board mounting in a variety
of lengths and diameters. The PC types PW02 and
PW07 (with printed circuit termination) mate with all
MIL-C-26482 plugs. They are competitively priced with
the solder ver-sion, and a substantial savings can be
realized when ter-minated by wave or reow soldering.
If you require special plating (other than cadmium) or
other modications (i.e., clinch nuts), please advise
requirements.
Cinch can also supply these connectors with
custom ex circuitry attached. Please discuss
your requirements with your local Cinch Sales
Representative.
PW07 - Shell Dimensions
Printed Circuit Termination
Other dimensions available.
Consult with factory
PW02 (Any Class) PW07 (A and C Class only)
+1 305.234.1000
cinch.com
9
Dimensions in Inches
SHELL
SIZE
Xf
MIN.
DIA.
Xp
MIN.
DIA.
Xj
K±.016
YMAX.
Yf
MAX.
Ya
MAX.
Le
MAX.
Lf
MAX.
Lp
MAX.
Lj
MAX.
Ljf
MAX.
La
MAX.
M+.031
-.000
A±.003
R(Tp)
SMAX.
T±.005
V THREAD
CLASS 2A
V V THREAD
CLASS 2A
MIN.
CLOSED
I.D.
MAX.
FREE
I.D.
8 .234 .317 .168 .230 .062 .608 .828 .590 1.281 1.844 1.453 1.781 2.271 1.554 .431 .471 .594 .828 .120 1/2-28 UNEF 7/16-28 UNEF
10 .297 .434 .205 .312 .062 .734 .891 .717 1.281 1.844 1.453 1.781 2.271 1.554 .431 .588 .719 .954 .120 5/8-24 UNEF 9/16-24 UNEF
12 .422 .548 .338 .442 .062 .858 1.016 .834 1.281 1.844 1.453 1.921 2.411 1.554 .431 .748 .812 1.047 .120 3/4-20 UNEF 11/16-24
UNEF
14 .547 .673 .416 .539 .062 .984 1.141 .970 1.281 1.844 1.453 2.109 2.599 1.554 .431 .873 .906 1.141 .120 7/8-20 UNEF 13/16-20
UNEF
16 .609 .798 .550 .616 .062 1.110 1.203 1.088 1.281 1.969 1.453 2.328 2.943 1.554 .431 .998 .969 1.234 .120 1-20 UNEF 15/16-20
UNEF
18 .734 .899 .600 .672 .062 1.234 1.469 1.216 1.281 1.969 1.453 2.562 3.172 1.554 .431 1.123 1.062 1.328 .120 1 3/16-18
UNEF
1 1/16-18
UNEF
20 .734 1.024 .635 .747 .094 1.360 1.469 1.332 1.531 2.234 1.672 3.000 3.610 1.771 .556 1.248 1.156 1.453 .120 1 3/16-18
UNEF
1 3/16-18
UNEF
22 .922 1.149 .670 .846 .094 1.484 1.656 1.460 1.531 2.234 1.672 3.156 3.766 1.771 .556 1.373 1.250 1.578 .120 1 7/16-18
UNEF
1 5/16-18
UNEF
24 .984 1.274 .740 .894 .094 1.610 1.750 1.585 1.594 2.297 1.734 3.375 3.985 1.834 .589 1.498 1.375 1.703 .147 1 7/16-18 IMEF 1 7/16-18
UNEF
Dimensions in Millimeters
SHELL
SIZE
Xf
MIN.
DIA.
Xp
MIN.
DIA.
Xj
MIN.
CLOSED
I.D.
K±.406
YMAX.
Yf
MAX.
Ya
MAX.
Le
MAX.
Lf
MAX.
Lp
MAX.
Lj
MAX.
Ljf
MAX.
La
MAX.
M+.787
-.000
A±.076
R(Tp)
SMAX.
T±.127
V THREAD
CLASS 2A
V V THREAD
CLASS 2A
MAX.
FREE
I.D.
8 5.95 8.05 4.27 5.84 1.57 15.44 21.03 14.99 32.54 46.84 36.91 45.24 57.68 36.12 10.95 11.99 15.09 21.03 3.05 1/2-28 UNEF 7/16-28 UNEF
10 7.54 11.02 5.21 7.92 1.57 18.64 22.63 18.21 32.54 46.84 36.91 45.24 57.68 36.12 10.95 14.94 18.26 24.23 3.05 5/8-24 UNEF 9/16-24 UNEF
12 10.72 13.92 8.59 11.23 1.57 21.79 25.81 21.18 32.54 46.84 36.91 48.79 61.24 36.12 10.95 19.00 20.63 26.59 3.05 3/4-20 UNEF 11/16-24 UNEF
14 13.89 17.09 10.57 13.69 1.57 24.99 28.98 24.61 32.54 46.84 36.91 53.57 66.01 36.12 10.95 22.17 23.01 28.98 3.05 7/8-20 UNEF 13/16-20 UNEF
16 15.47 20.27 13.97 15.65 1.57 28.19 30.56 27.64 32.54 50.01 36.91 59.13 74.75 48.82 10.95 25.35 24.61 31.34 3.05 1-20 UNEF 15/16-20 UNEF
18 18.64 22.83 15.24 17.07 1.57 31.34 37.31 30.89 32.54 50.01 36.91 65.07 80.57 48.82 10.95 28.52 26.98 33.73 3.05 1 3/16-18
UNEF 1 1/16-18 UNEF
20 18.64 26.01 16.13 18.97 2.39 34.54 37.31 33.83 38.89 56.74 42.47 76.20 91.69 43.26 14.12 31.70 29.36 36.91 3.05 1 3/16-18
UNEF 1 3/16-18 UNEF
22 23.42 29.18 17.02 21.49 2.39 37.82 42.06 37.08 38.89 56.74 42.47 80.16 65.66 43.26 14.12 34.27 31.75 40.08 3.05 1 7/16-18
UNEF 1 5/16-18 UNEF
24 24.99 32.36 18.80 22.71 2.39 40.89 44.45 40.26 40.49 58.34 44.04 85.73 101.22 44.83 14.96 38.05 34.93 43.26 3.73 1 7/16-18
UNEF 1 7/16-18 UNEF
Application:
Wall Mounting
Connector.
Suggested mates
are PW06/MS3116
and PW08 styles.
Note: L* = Total
connector length
including cable
accessory.
Series PW00/MS3110 Wall Mount Receptacle
10
Dimensions in Inches
SHELL
SIZE
Xf
MIN.
Xp
MIN.
Xj
K±.010
YMAX.
Yf
MAX.
Ya
MAX.
Le
MAX.
Lf
MAX.
Lp
MAX.
Lj
MAX.
La
MAX.
Ljf
MAX.
M+.031
-.000
A±.003
G±.020
SMAX.
V THREAD
CLASS 2A
V V THREAD
CLASS 2A
MIN.
CLOSED
I.D.
MAX.
CLOSED
I.D.
8 .234 .317 .168 .230 .094 .608 .828 .590 1.281 1.844 1.453 1.781 1.554 2.271 .400 .471 .938 .828 1/2-28 UNEF 7/16-28 UNEF
10 .297 .434 .205 .312 .094 .734 .891 .717 1.281 1.844 1.453 1.781 1.554 2.271 .400 .588 1.062 .954 5/8-24 UNEF 9/16-24 UNEF
12 .422 .548 .338 .442 .094 .858 1.016 .834 1.281 1.844 1.453 1.921 1.554 2.411 .400 .748 1.156 1.047 3/4-20 UNEF 11/16-24 UNEF
14 .547 .673 .416 .539 .094 .984 1.141 .970 1.281 1.844 1.453 2.109 1.554 2.599 .400 .873 1.250 1.141 7/8-20 UNEF 13/16-20 UNEF
16 .609 .798 .550 .616 .094 1.110 1.203 1.088 1.281 1.969 1.453 2.328 1.554 2.943 .400 .998 1.344 1.234 1-20 UNEF 15/16-20 UNEF
18 .734 .899 .600 .672 .094 1.234 1.469 1.216 1.281 1.969 1.453 2.562 1.554 3.172 .400 1.123 1.438 1.328 1 3/16-18 UNEF 1 1/16-18 UNEF
20 .734 1.024 .635 .747 .115 1.360 1.469 1.332 1.531 2.234 1.672 3.000 1.771 3.610 .535 1.248 1.562 1.453 1 3/16-18 UNEF 1 3/16-18 UNEF
22 .922 1.149 .670 .846 .115 1.484 1.656 1.460 1.531 2.234 1.672 3.156 1.771 3.766 .535 1.373 1.688 1.578 1 7/16-18 UNEF 1 5/16-18 UNEF
24 .984 1.274 .740 .894 .115 1.610 1.750 1.585 1.594 2.297 1.734 3.375 1.834 3.985 .568 1.498 1.812 1.70 1 7/16-18 UNEF 1 7/16-18 UNEF
Dimensions in Millimeters
SHELL
SIZE Xf Xp
Xj
K±.254
YMAX.
Yf
MAX.
Ya
MAX.
Le
MAX.
Lf
MAX.
Lp
MAX.
Lj
MAX.
La
MAX.
Ljf
MAX.
M+.787
-.000
A±.076
G±.508
SMAX.
V THREAD
CLASS 2A
V V THREAD
CLASS 2A
MIN.
CLOSED
I.D.
MAX.
CLOSED
I.D.
8 5.94 8.05 4.27 5.84 2.39 15.44 21.03 14.99 32.54 46.84 36.91 45.24 36.12 57.68 10.16 11.99 23.83 21.03 1/2-28 UNEF 7/16-28 UNEF
10 7.54 11.02 5.21 7.92 2.39 18.64 22.63 18.21 32.54 46.84 36.91 45.24 36.12 57.68 10.16 14.94 26.97 24.23 5/8-24 UNEF 9/16-24 UNEF
12 10.72 13.92 8.59 11.23 2.39 21.79 25.81 21.18 32.54 46.84 36.91 48.79 36.12 61.24 10.16 19.00 29.36 26.59 3/4-20 UNEF 11/16-24 UNEF
14 13.89 17.09 10.57 13.69 2.39 24.99 28.98 24.64 32.54 46.84 36.91 53.57 36.12 66.01 10.16 22.17 31.75 28.98 7/8-20 UNEF 13/16-20 UNEF
16 15.47 20.27 13.97 15.65 2.39 28.19 30.56 27.64 32.54 50.01 36.91 59.13 48.82 74.75 10.16 25.35 34.14 31.34 1-20 UNEF 15/16-20 UNEF
18 18.64 22.83 15.24 17.07 2.39 31.34 37.31 30.89 32.54 50.01 36.91 65.07 48.82 80.57 10.16 28.52 36.53 33.73 1 3/16-18 UNEF 1 1/16-18 UNEF
20 18.64 26.01 16.13 18.97 2.92 34.54 37.31 33.83 38.89 56.74 42.47 76.20 43.26 91.69 13.59 31.70 39.67 36.91 1 3/16-18 UNEF 1 3/16-18 UNEF
22 23.42 29.18 17.02 21.49 2.92 37.82 42.06 37.08 38.89 56.74 42.47 80.16 43.26 65.66 13.59 34.87 42.88 40.08 1 7/16-18 UNEF 1 5/16-18 UNEF
24 24.99 32.36 18.80 22.71 2.92 40.89 44.45 40.26 40.49 58.34 44.04 85.73 44.83 101.22 14.43 38.05 46.02 43.26 1 7/16-18 UNEF 1 7/16-18 UNEF
Application: Cable-
to-Cable Connector.
Suggested mates
are PW06/MS3116
and PW08 styles.
Note: L* = Total
connector length
including cable
accessory.
Series PW01/MS3111 In-Line Receptacle
+1 305.234.1000
cinch.com
11
Dimensions in Inches
SHELL
SIZE A±.003 K± .010 LMAX. M+.031
-.000 N± .015 R(Tp) SMAX. T± .005
8 .471 .062 .978 .431 .438 .594 .828 .120
10 .588 .062 .978 .431 .558 .719 .954 .120
12 .748 .062 .978 .431 .688 .812 1.047 .120
14 .873 .062 .978 .431 .812 .906 1.141 .120
16 .998 .062 .978 .431 .938 .969 1.234 .120
18 1.123 .062 .978 .431 1.062 1.062 1.328 .120
20 1.248 .094 1.196 .556 1.188 1.156 1.453 .120
22 1.373 .094 1.196 .556 1.312 1.250 1.578 .120
24 1.498 .094 1.196 .589 1.438 1.375 1.703 .147
Dimensions in Millimeters
SHELL
SIZE A±.076 K±.254 LMAX. M+.787
-.000 N±.381 R(Tp) SMAX. T±.127
8 12.01 1.57 24.84 10.95 11.13 15.09 21.03 3.05
10 14.99 1.57 24.84 10.95 14.27 18.26 24.23 3.05
12 19.05 1.57 24.84 10.95 17.48 20.62 26.59 3.05
14 22.23 1.57 24.84 10.95 20.62 23.01 28.98 3.05
16 25.40 1.57 24.84 10.95 23.83 24.61 31.34 3.05
18 28.58 1.57 24.84 10.95 26.97 26.97 33.73 3.05
20 31.75 2.39 30.38 14.12 30.18 29.36 36.91 3.05
22 34.93 2.39 30.38 14.12 33.32 31.75 40.08 3.05
24 38.10 2.39 30.38 14.96 36.53 34.93 43.26 3.73
Series PW02/MS 3112 Box Mount Receptacle
Application: Box Mount Receptacle.
Suggested mates are PW06/MS3116
and PW08 styles.
For printed circuit board terminations,
see page 7.
12
Dimensions in Inches
SHELL
SIZE
Xf
MIN.
P
Xp
MIN.
K±.020
Yf
MAX.
Yp
MAX.
Le
MAX.
Lf
MAX.
Lp
MAX.
M+.031-
.000
A±.003
AA
MAX.
SMAX.
Z THREAD
MIN. MAX.
8 .234 .062 .125 .317 .117 .828 .608 1.281 1.750 1.391 .691 .471 .767 .954 5/8-24 UNEF
10 .297 .062 .125 .434 .117 .891 .734 1.281 1.750 1.391 .691 .588 .892 1.078 3/4-20 UNEF
12 .422 .062 .125 .548 .117 1.016 .858 1.281 1.750 1.391 .691 .748 1.079 1.266 7/8-20 UNEF
14 .547 .062 .125 .673 .117 1.141 .984 1.281 1.750 1.391 .691 .873 1.205 1.391 1-20 UNEF
16 .609 .062 .125 .798 .117 1.203 1.110 1.281 1.875 1.391 .691 .998 1.329 1.516 1 1/8-18 UNEF
18 .734 .062 .125 .899 .117 1.469 1.234 1.281 1.875 1.391 .691 1.123 1.455 1.641 1 1/4-18 UNEF
20 .734 .062 .250 1.024 .148 1.469 1.360 1.531 2.125 1.641 .879 1.248 1.579 1.828 1 3/8-18 UNEF
22 .922 .062 .250 1.149 .148 1.656 1.484 1.531 2.125 1.641 .879 1.373 1.705 1.954 1 1/2-18 UNEF
24 .984 .062 .250 1.274 .148 1.750 1.610 1.593 2.187 1.703 .912 1.498 1.829 2.078 1 5/8-18 UNEF
Dimensions in Millimeters
SHELL
SIZE
Xf
MIN.
P
Xp
MIN.
K±.508
Yf
MAX.
Yp
MAX.
Le
MAX.
Lf
MAX.
Lp
MAX.
M+.787-.000
A±.076
AA
MAX.
SMAX.
Z THREAD
MIN. MAX.
8 5.94 1.57 3.18 8.05 2.97 21.03 15.44 32.53 44.45 35.33 17.55 11.99 19.48 24.23 5/8-24 UNEF
10 7.54 1.57 3.18 11.02 2.97 22.63 18.64 32.53 44.45 35.33 17.55 14.94 22.66 27.38 3/4-20 UNEF
12 10.72 1.57 3.18 13.92 2.97 25.81 21.79 32.53 44.45 35.33 17.55 19.00 27.41 32.16 7/8-20 UNEF
14 13.89 1.57 3.18 17.09 2.97 29.98 24.99 32.53 44.45 35.33 17.55 22.17 30.61 35.33 1-20 UNEF
16 15.47 1.57 3.18 20.27 2.97 30.56 28.19 32.53 47.63 35.33 17.55 25.35 33.76 38.51 1 1/8-18 UNEF
18 18.64 1.57 3.18 22.83 2.97 37.31 31.34 32.53 47.63 35.33 17.55 28.52 36.96 41.68 1 1/4-18 UNEF
20 18.64 1.57 6.35 26.01 3.76 37.31 34.54 38.90 53.98 41.68 22.33 31.70 40.11 46.43 1 3/8-18 UNEF
22 23.42 1.57 6.35 29.18 3.76 42.06 39.69 38.90 53.98 41.68 22.33 34.87 43.31 49.63 1 1/2-18 UNEF
24 24.99 1.57 6.35 32.36 3.76 44.45 40.89 40.50 55.55 43.26 23.16 38.05 46.46 52.78 1 5/8-18 UNEF
Series PW07/MS 3114 Jam Nut Receptacle
Application: Jam Nut Mounting with O-ring to D-shaped Chassis Hole. See panel cutout dimensions on page 6.
Suggested mates are PW06/MS3116 and PW08 styles. Note: L* = Total connector length including cable accessory.
+1 305.234.1000
cinch.com
13
Dimensions in Inches
SHELL
SIZE A±.003 AA
MAX. K±.020 M+.031
-.000
P
SMAX. Z THREAD
MIN. MAX.
8 .471 .767 .117 .691 .062 .125 .954 9/16-24 UNEF
10 .588 .892 .117 .691 .062 .125 1.078 11/16-24 UNEF
12 .748 1.079 .117 .691 .062 .125 1.266 7/8-20 UNEF
14 .873 1.205 .117 .691 .062 .125 1.391 1-20 UNEF
16 .998 1.329 .117 .691 .062 .125 1.516 1 1/8-18 UNEF
18 1.123 1.455 .117 .691 .062 .125 1.641 1 1/4-18 UNEF
20 1.248 1.579 .148 .879 .062 .250 1.828 1 3/8-18 UNEF
22 1.373 1.705 .148 .879 .062 .250 1.954 1 1/2-18 UNEF
24 1.498 1.829 .148 .912 .062 .250 2.078 1 5/8-18 UNEF
Dimensions in Millimeters
SHELL
SIZE A±.076 AA
MAX. K±.508 M±.787
-.000
PSMAX. Z THREAD
MIN. MAX.
8 11.99 19.48 2.97 17.55 1.57 3.18 24.23 9/16-24 UNEF
10 14.94 22.66 2.97 17.55 1.57 3.18 27.38 11/16-24 UNEF
12 19.00 27.41 2.97 17.55 1.57 3.18 32.16 7/8-20 UNEF
14 22.17 30.61 2.97 17.55 1.57 3.18 35.33 1-20 UNEF
16 25.35 33.76 2.97 17.55 1.57 3.18 38.51 1 1/8-18 UNEF
18 28.52 36.96 2.97 17.55 1.57 3.18 41.68 1 1/4-18 UNEF
20 31.70 40.11 3.76 22.33 1.57 6.35 46.43 1 3/8-18 UNEF
22 34.87 43.31 3.76 22.33 1.57 6.35 49.63 1 1/2-18 UNEF
24 38.05 46.46 3.76 23.16 1.57 6.35 52.78 1 5/8-18 UNEF
Series PW07A/C Jam Nut Receptacle
Application: Jam Nut Mounting with O-ring to D-shaped Chassis Hole. See panel cutout dimensions on page 6.
Suggested mates are PW06/MS3116 and PW08 styles. For printed circuit terminations, see page 7.
14
Dimensions in Inches
SHELL
SIZE
Xf
MIN.
Xp
MIN.
Xj
YMAX.
Yf
MAX.
Ya
MAX.
Le
MAX.
Lf
MAX.
Lp
MAX.
LjMAX.
La
MAX.
Ljf
MAX.
QMAX.
V THREAD VV THREAD
MIN.
CLOSED
I.D.
MAX.
CLOSED
I.D.
8 .234 .317 .168 .230 .608 .828 .590 1.281 1.828 1.500 1.781 1.609 2.271 .782 1/2-28 UNEF 7/16-28 UNEF
10 .297 .434 .205 .312 .734 .891 .717 1.281 1.828 1.500 1.781 1.609 2.271 .926 5/8-24 UNEF 9/16-24 UNEF
12 .422 .548 .338 .442 .858 1.016 .834 1.281 1.828 1.500 1.921 1.609 2.411 1.043 3/4-20 UNEF 11/16-24 UNEF
14 .547 .673 .416 .539 .984 1.141 .970 1.281 1.828 1.500 2.109 1.609 2.599 1.183 7/8-20 UNEF 13/16-20 UNEF
16 .609 .798 .550 .616 1.110 1.203 1.088 1.281 1.969 1.500 2.328 1.609 2.943 1.305 1-20 UNEF 15/16-20 UNEF
18 .734 .899 .600 .672 1.234 1.469 1.216 1.281 1.969 1.500 2.562 1.609 3.172 1.391 1 3/16-18 UNEF 1 1/16-18 UNEF
20 .734 1.024 .635 .747 1.360 1.469 1.332 1.453 2.141 1.609 3.000 1.656 3.610 1.531 1 3/16-18 UNEF 1 3/16-18 UNEF
22 .922 1.149 .670 .846 1.484 1.656 1.460 1.453 2.141 1.609 3.156 1.656 3.766 1.656 1 7/16-18 UNEF 1 5/16-18 UNEF
24 .984 1.274 .740 .894 1.610 1.750 1.585 1.510 2.219 1.687 3.375 1.750 3.985 1.777 1 7/16-18 UNEF 1 7/16-18 UNEF
Dimensions in Millimeters
SHELL
SIZE
Xf
MIN.
Xp
MIN.
Xj
YMAX.
Yf
MAX.
Ya
MAX.
Le
MAX.
Lf
MAX.
Lp
MAX.
LjMAX.
La
MAX.
Ljf
MAX.
QMAX.
V THREAD VV THREAD
MIN.
CLOSED
I.D.
MAX.
CLOSED
I.D.
8 5.94 8.05 4.27 5.84 15.44 21.03 14.99 32.54 46.43 38.10 45.24 40.87 57.68 19.86 1/2-28 UNEF 7/16-28 UNEF
10 7.54 11.02 5.21 7.92 18.64 22.63 18.21 32.54 46.43 38.10 45.24 40.87 57.68 23.52 5/8-24 UNEF 9/16-24 UNEF
12 10.27 13.92 8.59 11.23 21.79 25.81 21.18 32.54 46.43 38.10 48.79 40.87 61.24 26.49 3/4-20 UNEF 11/16-24 UNEF
14 13.89 17.09 10.57 13.69 24.99 28.98 24.64 32.54 46.43 38.10 53.57 40.87 66.01 30.05 7/8-20 UNEF 13/16-20 UNEF
16 15.47 20.27 13.97 15.65 28.19 30.56 27.64 32.54 50.01 38.10 59.13 40.87 74.75 33.15 1-20 UNEF 15/16-20 UNEF
18 18.64 22.83 15.24 17.07 31.34 37.31 30.89 32.54 50.01 38.10 65.07 40.87 80.57 35.33 1 3/16-18 UNEF 1 1/16-18 UNEF
20 18.64 26.01 16.13 18.97 34.54 37.31 33.83 36.91 54.38 40.87 76.20 42.06 91.69 38.89 1 3/16-18 UNEF 1 3/16-18 UNEF
22 23.42 29.18 17.02 21.49 37.69 42.06 37.08 36.91 54.38 40.87 80.16 42.06 95.66 42.06 1 7/16-18 UNEF 1 5/16-18 UNEF
24 24.99 32.36 18.80 22.71 40.89 44.45 40.26 38.35 56.36 42.85 85.73 44.45 101.22 45.14 1 7/16-18 UNEF 1 7/16-18 UNEF
Series PW06/MS3116 Straight Plug
Application: Straight Plug Connector; General Cable Coupling. Suggested mates are PW00/MS3110,
PW01/MS3111, PW02/MS3112, PW07/MS3114 and PW09/MS3119 styles. Note: L* = Total connector length
including cable accessory.
+1 305.234.1000
cinch.com
15
Dimensions in Inches
SHELL
SIZE YMAX. X THREAD
CLASS 2A
V THREAD
CLASS 2A LREF. AREF.
8 .782 7/16-28 UNEF .5000-28 UNEF 1.644 1.157
10 .926 9/16-24 UNEF .6250-24 UNEF 1.746 1.407
12 1.043 11/16-24 UNEF .7500-20 UNEF 1.868 1.580
14 1.183 13/16-20 UNEF .8750-20 UNEF 2.060 1.703
16 1.305 15/16-20 UNEF 1.0000-20 UNEF 2.227 1.865
18 1.391 1 1/16-18 UNEF 1.1875-18 UNEF 2.440 1.978
20 1.531 1 3/16-18 UNEF 1.1875-18 UNEF 2.694 2.191
22 1.656 1 5/16-18 UNEF 1.4375-18 UNEF 2.819 2.232
24 1.777 1 7/16-18 UNEF 1.4375-18 UNEF 2.979 2.372
Dimensions in Millimeters
SHELL
SIZE YMAX. V THREAD
CLASS 2A
V THREAD
CLASS 2A LREF. AREF.
8 19.86 7/16-28 UNEF .5000-28 UNEF 41.76 29.39
10 23.52 9/16-24 UNEF .6250-24 UNEF 44.35 35.74
12 26.49 11/16-24 UNEF .7500-20 UNEF 47.45 40.13
14 30.05 13/16-20 UNEF .8750-20 UNEF 52.32 43.26
16 33.15 15/16-20 UNEF 1.0000-20 UNEF 56.57 47.37
18 35.33 1 1/16-18 UNEF 1.1875-18 UNEF 61.98 50.24
20 38.89 1 3/16-18 UNEF 1.1875-18 UNEF 68.43 55.65
22 42.06 1 5/16-18 UNEF 1.4375-18 UNEF 71.60 56.69
24 45.14 1 7/16-18 UNEF 1.4375-18 UNEF 75.67 60.25
Application: 90° Cable Plug. Suggested mates are PW00/MS3110, PW01/MS3111, PW02/MS3112,
PW07/MS3114 and PW09/MS3119 styles.
Note: L* = Total connector length including cable accessory.
Series PW08 90° Angle Plug
16
Dimensions in Inches
SHELL
SIZE A(TP) BMAX. C±.005 DMAX. L±.005 MMIN. N±.005
8 .594 .828 .120 .782 1.060 .014 .065
10 .719 .954 .120 .926 1.060 .014 .065
12 .812 1.047 .120 1.043 1.060 .031 .065
14 .906 1.141 .120 1.183 1.060 .031 .065
16 .969 1.234 .120 1.305 1.060 .031 .065
18 1.062 1.328 .120 1.391 1.060 .050 .065
20 1.156 1.453 .120 1.531 1.060 .050 .100
22 1.250 1.578 .120 1.656 1.060 .050 .100
24 1.375 1.703 .147 1.777 1.060 .050 .100
Dimensions in Millimeters
SHELL
SIZE A(TP) BMAX. C±.127 DMAX. L±.762 MMIN. N±.127
8 15.09 21.03 3.05 19.86 26.92 .36 1.65
10 18.26 24.23 3.05 23.52 26.92 .36 1.65
12 20.62 26.59 3.05 26.49 26.92 .79 1.65
14 23.01 28.98 3.05 30.05 26.92 .79 1.65
16 24.61 31.34 3.05 33.15 26.92 .79 1.65
18 26.97 33.73 3.05 35.33 26.92 1.27 1.65
20 29.36 36.91 3.05 38.39 26.92 1.27 2.54
22 31.75 40.08 3.05 42.06 26.92 1.27 2.54
24 34.93 43.26 3.73 45.14 26.92 1.27 2.54
Series PW09 Flange Mount Plug
Application: Flange Mount
Plug. Suggested mate is PW01/
MS3111 style.
Note: Consult with factory for PC
terminated versions.
+1 305.234.1000
cinch.com
17
Dimensions in Inches
SHELL
SIZE AMAX. BTP D±.003 G±.016 LMAX. M+.031
-.000 T±.005
8 .828 .594 .471 .062 1.125 .562 .120
10 .954 .719 .588 .062 1.125 .562 .120
12 1.047 .812 .748 .062 1.125 .562 .120
14 1.141 .906 .873 .062 1.125 .562 .120
16 1.234 .969 .998 .062 1.125 .562 .120
18 1.328 1.062 1.123 .062 1.125 .562 .120
20 1.453 1.156 1.248 .094 1.406 .688 .120
22 1.578 1.250 1.373 .094 1.406 .688 .120
24 1.703 1.375 1.498 .094 1.406 .688 .147
Dimensions in Millimeters
SHELL
SIZE AMAX. BTP D±.076 G±.406 LMAX. M+.787
-.000 T±.127
8 21.03 15.09 11.96 1.57 25.58 14.27 3.05
10 24.23 18.26 14.94 1.57 25.58 14.27 3.05
12 26.59 20.62 19.00 1.57 25.58 14.27 3.05
14 28.98 23.01 22.17 1.57 25.58 14.27 3.05
16 31.34 24.61 25.35 1.57 25.58 14.27 3.05
18 33.73 26.97 28.52 1.57 25.58 14.27 3.05
20 36.91 29.36 31.70 2.39 35.71 17.48 3.05
22 40.08 31.75 34.87 2.39 35.71 17.48 3.05
24 43.26 34.93 38.05 2.39 35.71 17.48 3.73
Series PWB Thru-Bulkhead Receptacle/(MS3119
Commercial)
Application: Thru-Bulkhead.
Suggested mates are PW06/
MS3116 and PW08 styles.
The socket end of the insert
always appears at the “M”
dimension end of shell.
18
Part No. PW80-** or MS3180-** **= “Dash Number”
Part No. PW81-** or MS3181-** **= “Dash Number”
(MS 3180)
(MS 3181)
PW80/MS3180 and PW81/MS3181 Protective Caps
Dimensions in Inches
SHELL
SIZE
DASH NO. A
+.001
-.005
F
MAX.
H
±.25
L
MAX.
M
±.010
WITHOUT
CHAIN
WITH
CHAIN
8 G1 G11 .473 .719 3.00 .562 .378
10 G2 G12 .590 .844 3.00 .562 .378
12 G3 G13 .750 1.000 3.50 .562 .378
14 G4 G14 .875 1.125 3.50 .562 .378
16 G5 G15 1.000 1.250 3.50 .562 .378
18 G6 G16 1.125 1.375 3.50 .562 .378
20 G7 G17 1.250 1.500 4.00 .625 .440
22 G8 G18 1.375 1.625 4.00 .625 .440
24 G9 G19 1.500 1.750 4.00 .658 .473
Dimensions in Millimeters
SHELL
SIZE
DASH NO. A
+.03
-.13
F
MAX.
H
±6.35
L
MAX.
M
±.25
WITHOUT
CHAIN
WITH
CHAIN
8 G1 G11 12.01 18.28 76.20 14.27 9.60
10 G2 G12 14.98 21.41 76.20 14.27 9.60
12 G3 G13 19.05 25.40 88.90 14.27 9.60
14 G4 G14 22.21 28.58 88.90 14.27 9.60
16 G5 G15 25.40 31.75 88.90 14.27 9.60
18 G6 G16 28.58 34.93 88.90 14.27 9.60
20 G7 G17 31.75 38.10 101.60 15.87 11.17
22 G8 G18 34.93 41.28 101.60 15.87 11.17
24 G9 G19 38.10 44.45 101.60 16.71 12.01
Dimensions in Inches
SHELL
SIZE
DASH NO.
HL
MAX.
N
MIN.
Q
MAX.
WITHOUT
CHAIN
WITH
CHAIN
WITH
CHAIN &
WASHER
8 G1 G11 G21 3.00 .562 .578 .719
10 G2 G12 G22 3.00 .562 .703 .812
12 G3 G13 G23 3.50 .562 .891 1.000
14 G4 G14 G24 3.50 .562 1.016 1.125
16 G5 G15 G25 3.50 .562 1.141 1.250
18 G6 G16 G26 3.50 .562 1.266 1.375
20 G7 G17 G27 4.00 .562 1.391 1.500
22 G8 G18 G28 4.00 .562 1.516 1.625
24 G9 G19 G29 4.00 .602 1.641 1.750
Dimensions in Millimeters
SHELL
SIZE
DASH NO.
HL
MAX.
N
MIN.
Q
MAX.
WITHOUT
CHAIN
WITH
CHAIN
WITH
CHAIN &
WASHER
8 G1 G11 G21 76.20 14.27 14.68 18.26
10 G2 G12 G22 76.20 14.27 17.86 20.64
12 G3 G13 G23 88.90 14.27 22.63 25.40
14 G4 G14 G24 88.90 14.27 25.80 28.58
16 G5 G15 G25 88.90 14.27 28.98 31.75
18 G6 G16 G26 88.90 14.27 32.15 34.93
20 G7 G17 G27 101.60 14.27 35.33 38.10
22 G8 G18 G28 101.60 14.27 38.50 41.28
24 G9 G19 G29 101.60 15.29 41.68 44.45
+1 305.234.1000
cinch.com
19
Other Quality Connectors
QPL’d MIL-C-5015 &
Special Connectors
for Commercial Applications
QPL’d MIL-C-26482 Series I
Solder and Crimp Connectors
Buffet/Galley Connectors
Solder and Crimp Connectors
Filtered Connectors
Solder and Crimp Connectors
Omega
MIL-C-26500 – Cylindrical Connectors
Dura-Con
Microminiature-D Connectors
Expanded Beam Fiber
Optics
Special Cryogenic
Connectors
Quick Disconnect Connectors
Solder and Crimp Types
Rugged Acme Thread
Connectors
for Industrial Electrical Equipment
About Cinch
Proven Excellence
In operation since 1917, Cinch supplies high quality, high per-
formance connectors and cables globally to the Aerospace,
Military/Defense, Commercial Transportation, Oil & Gas, High
End Computer, and other markets. We provide custom solu-
tions with our creative, hands on engineering and end to end
approach.
Our diverse product offerings include: connectors, enclosures
and cable assemblies utilizing multiple contact technologies
including copper and ber optics. Our product engineering
and development activities employ cutting edge technologies
for design and modeling, and our various technologies and
expertise enable us to deliver custom solutions and products
for our strategic partnerships. We also serve a broad range
of commercial markets, largely through our highly efcient
distribution network.
We aim to exceed our customer’s expectations, and to con-
tinually provide innovative solutions to the rapidly changing
needs of the markets, and customers, we serve.
North America
+1 507.833.8822
ccsorders@us.cinch.com
belfuse.com/cinch
Asia Pacic
+86 21 5442 7668
ccs.asia.sales@as.cinch.com
Europe, Middle East & Africa
+44 (0) 1245 342060
CinchConnecvity@eu.cinch.com
