25MHz 3.2 x 2.5mm Reference Crystal 603-25-173 DATASHEET Specifications Parameters Frequency Ratings/Units 25.000 MHz Resonance Mode Fundamental Frequency Tolerance @ 25C 20 PPM Max Frequency Stability, ref @ 25C Over Operating Temperature Range 20 PPM Max Temperature Range, Operating (TOPR) -40C ~ +85C Temperature Range, Storage (TSTG) -40C ~ +85C Equivalent Series Resistance (ESR) 50 Ohms Max Shunt Capacitance (CO) 5 pF Max Load Capacitance (CL) 12 pF Drive Level 0.1 mW Max Aging over 10 years 5 PPM Max Maximum Soldering Temp / Time 260C / 10 Seconds Moisture Sensitivity Level (MSL) 1 Termination Finish: Weight (TYP) Au 16.75 mg RoHS Compliant, Pb-free Package Outline and Dimensions (JA4) 603-25-173 REVISION B 03/13/15 1 (c)2015 Integrated Device Technology, Inc. Package Outline and Dimensions (JA4), cont. Ordering Information Part / Order Number 603-25-173JA4I 603-25-173JA4I8 Shipping Packaging Package Temperature Cut-Tape 3.2 x 2.5 x 1.0 mm JA4 CLCC -40 to +85 C Tape and Reel 3.2 x 2.5 x 1.0 mm JA4 CLCC -40 to +85 C Corporate Headquarters Sales Tech Support 6024 Silver Creek Valley Road San Jose, CA 95138 USA 1-800-345-7015 or 408-284-8200 Fax: 408-284-2775 www.IDT.com email: clocks@idt.com DISCLAIMER Integrated Device Technology, Inc. (IDT) and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT's sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT's products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties. IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT. Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Product specification subject to change without notice. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective third party owners. Copyright (c)2015 Integrated Device Technology, Inc.. All rights reserved.