www.clare.com
Applications
Features Description
Ordering Information
Clare’s Molded Ultra-Mini DYADTM is well suited for small,
signal switching applications. The small size lends itself
to surface mountable applications; working well on higher
density PC boards. The Molded Ultra-Mini DYADTM has
sputtered ruthenium contacts and an extraordinary seal
strength achieved by a patented laser sealing of the leads.
In low level or dry switching environments, switches
typically exceed 1 billion operations. In addition, the
molding process provides a solid plastic outer shell. This
plastic shell provides superior mechanical strength,
eliminates concerns over handling glass switches, and
provides an ideal solution for high speed, automated
assembly environments.
Standard Test Coil
CM5
Part # Coil-1
Coil Definition NARM1 CTC01
Coil Resistance 1200Ω
Number of Turns 5,000
Wire Size 0.0399mm (AWG 46)
Bobbin Diameter (inside cell) 3.96mm
Winding Length 10.4mm
A complete part number is represented by the digits to
the right. For example, CM5S1030 is a MOLDED ULTRA-
MINI DYAD™ with a minimum operate value of 10NI and
a maximum of 30NI. Refer to the switch operating
specification charts for available ranges. Special ranges
are available upon request.
Surface Mount Molded Ultra-Mini DYAD
Refer to operating characteristics table for complete part number.
Molded Ultra-Mini DYAD™
Molded Ultra-Mini DYAD™ Surface Mount
1 Tolerance = ± 1.5NI
2 Full Blade Sensitivity
3 Surface Mount Switches are packaged 3,000 parts per reel
1
Part # Operate Range (NI)1
CM5S1015 10 to 15
CM5S1020 10 to 20
CM5S1030 10 to 30
CM5S1520 15 to 20
CM5S1525 15 to 25
CM5S2025 20 to 25
Part # Operate Range (NI)1,2,3
CM5-2319 10 to 15
CM5-2315 10 to 20
CM5-2376 10 to 30
CM5-2325 15 to 20
CM5-2341 15 to 25
CM5-2378 20 to 25
Molded Ultra-Mini DYAD™
CM5
DS-CM5-R1
•Small size
•SMT-compatible
•Easily formed leads
•Sputtered ruthenium contacts
•Hermetically sealed contacts
•Fast switching speed — up to 500Hz
•Wide range of available magnetic sensitivities
• Superior mechanical strength
• Enhanced for better auto placement
•Security
−Proximity sensing
−Smoke alarms
•Automotive
−Level sensor
−Lamp current sensor
•Relays
The magnetic force (expressed in NI, AT or Ampere Turns) required to cause the reed switch contacts to
close is called the pull-in or operate value.
(1) Consult factory for test procedure.
The reed switch shall be placed in the test coil with the gap centered in the core of the coil winding.
Test leads and their clips must be non-magnetic.
The longitudinal axis of the test coil and the test switch shall be vertical.
CM5SXXXX
Maximum
operate value
Minimum
operate value
"S" for straight switch
www.clare.com
CM5
Rev. 1
Absolute Maximum Ratings are stress ratings. Stresses
in excess of these ratings can cause permanent damage
to the device. Functional operation of the device at these
or any other conditions beyond those indicated in the
operational sections of this data sheet is not implied.
Exposure of the device to the absolute maximum ratings
for extended period may degrade the device and effect
its reliability.
Absolute Maximum Ratings (@ 25˚ C)
Molded Ultra-Mini DYAD™
2
Parameter Min Typ Max Units
Switching Voltage
CM5 - Molded Ultra Mini-DYAD™ - - 175 Volts
Switching Current
CM5 - Molded Ultra Mini-DYAD™ - - 0.25 Amps
Carry Current
CM5 - Molded Ultra Mini-DYAD™ - - 0.50 Amps
Switching Frequency
CM5 - Molded Ultra Mini-DYAD™ - - 500 Hz
Contact Resistance
CM5 - Molded Ultra Mini-DYAD™ - - 300 mΩ
(See detailed specifications for more information.)
Specifications
All parameters are at 25°C unless otherwise stated.
PARAMETER CONDITIONS SYMBOL MIN TYP MAX UNITS
Contact Ratings
Operate ampere turns range Full Blade Tolerance = ± 1.5NI AT 10 - 30 NI
Release ampere turns range Full Blade Tolerance = ± 1.5NI AT 5 - 30 NI
5Switching Voltage Max DC/PeakAC Resistive VL- - 175 VDC
Switching Current Max DC/PeakAC Resistive IL- - 250 mAmps
Carry Current Max DC/PeakAC Resistive IC- - 0.5 Amps
Contact Rating Max DC/PeakAC Resistive - - - 5 VA
Life Expectancy 1V, 10mA Signal Level - - 1000 - x106 Ops
10V, 10mA Low Level - - 500 - -x106 Ops
50V, 100mA Telecom Load - - 2 - x106 Ops
100V, 100mA Rated Loads - - 2 - x106 Ops
Static Contact Resistance 50mV, 10mA(1) CR - 120 300 Ω
Contact Material - - Ru - -
Switch Specifications
Insulation Resistance(2) 100V, 25°C, 40% RH IR 1091011 -Ω
Capacitance Across Open Contacts - - 0.3 - pF
Dielectric Strength(5) Between Contacts - 200 - - VDC/Peak AC
Operate Time, At nominal coil voltage, TOP - - 0.4 ms
including bounce 10Hz Square Wave
Release Time Zener-Diode Suppression(3) TREL - - 0.1 ms
Environmental Ratings
Storage Temperature TA-40 - +125 ˚C
Operating Temperature TO-40 - +125 ˚C
Soldering Temperature - - - +265 ˚C
Vibration 5Hz - 200Hz G - - 20 -Gs
Shock 11±1ms, 1/2 Sine Wave S - - 30 Gs
Shock - survivability 11±1ms, 1/2 Sine Wave S - - 500 Gs
(1) Contact resistance measured with 4 terminal method, 1.1" between test leads
(2) >1012 Ω is available upon request
(3) A 24V zener in series with a diode across the coil
(4) Use caution not to exceed vibration resistance limits while ultrasonically cleaning. Contact Clare, Inc.
Engineering for more details/ recommendations
(5) 15 ampere turn minimum
CM5
www.clare.com
Rev. 1
Mechanical Dimensions
Dimensions
mm
inches
Molded Ultra-Mini DYAD™
3
CLARE LOCATIONS
Clare Headquarters
78 Cherry Hill Drive
Beverly, MA 01915
Tel: 1-978-524-6700
Fax: 1-978-524-4900
Toll Free: 1-800-27-CLARE
Clare Switch Division
4315 Earth City Expresssway
St. Louis, MO 63045
Tel: 1-314-770-1832
Fax: 1-314-770-1812
Clare Micronix Division
145 Columbia
Aliso Viejo, CA 92656-1490
Tel: 1-949-831-4622
Fax: 1-949-831-4628
SALES OFFICES
AMERICAS
Americas Headquarters
Clare
78 Cherry Hill Drive
Beverly, MA 01915
Tel: 1-978-524-6700
Fax: 1-978-524-4900
Toll Free: 1-800-27-CLARE
Eastern Region
Clare
P.O. Box 856
Mahwah, NJ 07430
Tel: 1-201-236-0101
Fax: 1-201-236-8685
Toll Free: 1-800-27-CLARE
Central Region
Clare Canada Ltd.
3425 Harvester Road, Suite 202
Burlington, Ontario L7N 3N1
Tel: 1-905-333-9066
Fax: 1-905-333-1824
Western Region
Clare
1852 West 11th Street, #348
Tracy, CA 95376
Tel: 1-209-832-4367
Fax: 1-209-832-4732
Toll Free: 1-800-27-CLARE
Canada
Clare Canada Ltd.
3425 Harvester Road, Suite 202
Burlington, Ontario L7N 3N1
Tel: 1-905-333-9066
Fax: 1-905-333-1824
EUROPE
European Headquarters
CP Clare nv
Bampslaan 17
B-3500 Hasselt (Belgium)
Tel: 32-11-300868
Fax: 32-11-300890
France
Clare France Sales
Lead Rep
99 route de Versailles
91160 Champlan
France
Tel: 33 1 69 79 93 50
Fax: 33 1 69 79 93 59
Germany
Clare Germany Sales
ActiveComp Electronic GmbH
Mitterstrasse 12
85077 Manching
Germany
Tel: 49 8459 3214 10
Fax: 49 8459 3214 29
Italy
C.L.A.R.E.s.a.s.
Via C. Colombo 10/A
I-20066 Melzo (Milano)
Tel: 39-02-95737160
Fax: 39-02-95738829
Sweden
Clare Sales
Comptronic AB
Box 167
S-16329 Spånga
Tel: 46-862-10370
Fax: 46-862-10371
United Kingdom
Clare UK Sales
Marco Polo House
Cook Way
Bindon Road
Taunton
UK-Somerset TA2 6BG
Tel: 44-1-823 352541
Fax: 44-1-823 352797
ASIA PACIFIC
Asian Headquarters
Clare
Room N1016, Chia-Hsin, Bldg II,
10F, No. 96, Sec. 2
Chung Shan North Road
Taipei, Taiwan R.O.C.
Tel: 886-2-2523-6368
Fax: 886-2-2523-6369
http://www.clare.com
Worldwide Sales Offices
Specification: PB-CM5-R1
©Copyright 2001, Clare, Inc.
Molded Ultra-Mini DYAD™, Molded Mini DYAD™, and
Molded DYAD® are trademarks of Clare, Inc.
All rights reserved. Printed in USA.
5/01/01
Clare cannot assume responsibility for use of any circuitry other
than circuitry entirely embodied in this Clare product. No circuit
patent licenses nor indemnity are expressed or implied. Clare re-
serves the right to change the specification and circuitry, without
notice at any time. The products described in this document are not
intended for use in medical implantation or other direct life support
applications where malfunction may result in direct physical harm,
injury or death to a person.
