pOperating ambient -20ºC to +50ºC
pStorage temperature -40ºC to +100ºC
pOperating case temperature +85ºC max
pNon-isolated output
FEATURES /
BENEFITS
OPERATING CONDITIONS
MDEXLUMPWD_B
Dialight Corporation
1501 Route 34 South • Farmingdale, NJ 07727 USA
Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com
POWERWHITE
DRIVER
pUniversal input 90 to 264VAC
pHigh output power 60 watts
pCurrent options 350mA or 700mA versions
pHigh Reliability No electrolytic capacitors
pIP6X Fully en-capsulated construction
pETL UL1012 Pending
pLifesaver LED thermal feedback protection
pLED constant current driver
Dialight reserves the right to make changes at any time
in order to supply the best product possible.
pRoadway lighting
pStreet lighting
pSign lighting
pArchitectural lighting and display lighting
APPLICATION
DESCRIPTIONS MECHANICAL DIMENSIONS
pUSA Version:
Black hard anodized die cast housing
encapsulation: UL recognized 94V-0 material
1x 6 pre-attached Micro fit 3connector
UL1015 18 gauge 105C primary wires (for US version
(Black and White primary wires)
Prefitted earth ground screw (For US version)
#4 screws required for mounting
pEuropean version:
Black hard anodized die cast housing
encapsulation: UL recognized 94V-0 material
1x 6 pre-attached Micro fit 3connector
Primary wires Colour Code
Wire 1 :Live
Wire 2 :Neutral
Green/Yellow: Earth
M4 screws required for mounting
pActual size: 7.51" (191mm) x 2.08" (53mm) x 1.3" (33mm)
pInput cable length: 19.6" (500mm)
pOutput cable length: 19.6" (500mm)
pAll fixing points M4 diameter
see page 2 for recommended mounting layout
ORDERING INFORMATION
USA version Part Numbers:-
PWD-60-1-35-P-US (350mA output)
PWD-60-1-70-P-US (700mA output)
European version Part Numbers:-
PWD-60-1-35-P (350mA output)
PWD-60-1-70-P (700mA output)
Dialight Europe Ltd
Exning Road • Newmarket • Suffolk, United Kingdom, CB8 0AX
Tel :+44 (0)1638 666541 • www.dialight.com
ELECTRICAL SPECIFICATIONS
MDEXLUMPWD_B
Dialight Corporation
1501 Route 34 South • Farmingdale, NJ 07727 USA
Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com
Operating Voltage: 90 to 264VAC
Frequency: 50/60Hz (47 to 63Hz)
Power Factor: > .95
Input Current: .68amps at 90 VAC
at full load .27amps at 230 VAC
THD: < 20%
Thermistor Option: 4.7k NTC for 70ºC +/- 5% cutoff
10.0k NTC for 90ºC +/- 5% cutoff
Output Voltage: 55 - 180VDC max at 350mA
20 - 104VDC max at 700mA
Min / Max Power: 20 - 60 watts
Output Current : 350mA +/- 5% typical
700mA +/- 5% typical
Number of LEDS: 17 to 48 at 350mA*
8 to 26 at 700mA*
*Based on a typical LED forward voltage of 3.2V - 3.5V
WIRING DETAILS
European version
USA version USA & European version output cable
LEDs connected
in series.
Thermistor connection
not required for
operation.
Mounting Layout
The output cable is fitted with a 6x1 Micro-fit 3.0 Molex (Molex Part No.
436450600) connector (illustration shown) this can be removed if required.
Output connection detail.
LED A (+) Wire 1 Pin 4
LED K (-) Wire 2 Pin 3
Therm + Wire 3 Pin 2
Therm - Wire 4 Pin 1
Ground Grn/Yel Pin 6
Dialight Europe Ltd
Exning Road • Newmarket • Suffolk, United Kingdom, CB8 0AX
Tel :+44 (0)1638 666541 • www.dialight.com
Driver Efficiency at 350mA (230V INPUT)
Number of LED's Efficiency
18 85%
24 87%
48 89%
Driver Efficiency at 700mA (230V INPUT)
Number of LED's Efficiency
12 85%
18 89%
24 91%
