FC SERIES - 5A, 10A, 20A, FILTER DESCRIPTION FEATURES FC100 industry standard input filter modules provide up to 30 dB of common mode and differential mode filtering at 500 kHz. The FC100's are available in 5A, 10A, and 20A versions and are optimized for operation with Power-One's high density, board-mounted products. The filters can be operated with up to 100 VDC input and have 1500 VDC isolation. * Meets Class B Conducted Limits * Optimized For Power-One's High Density, Board-Mounted Products * PCB Mountable * Common Mode and Differential Mode Filtering * Industry Standard Pinout * -40C to 100C Case Operation * >30 dB Insertion Loss at 500 kHz * 100 VDC Operation * 1500 V Isolation TECHNICAL SPECIFICATIONS Input Maximum Input Voltage Line-to-Case Operation Input Frequency 100 VDC 1000 VDC 100 Hz Output Maximum Average Current 400 LFM Airflow Iout Max. Natural Convection 70% Iout General Isolation Input - Case Case Temperature Operating Range @ Iout Max. Operating Range @ 70% Iout Max. Storage Range Humidity Max., Non-Condensing Vibration, 3 Axes, 5 Min Each MTBF (Bellcore TR-NWT-000332) Safety 1500 VDC -40 to +60C -40 to +80C -40 to +125C 95% 5 g, 10 - 55 Hz Consult Factory Consult Factory Notes MTBF predictions may vary slightly from model to model. Specifications typically at 25C, normal line, and full load, unless otherwise stated. Soldering Conditions: I/O pins, 260C, ten seconds; fully compatible with commercial wave-soldering equipment. Safety: Agency approvals may vary from model to model. Please consult factory for specific model information. REV. FEB 25, 2003 1 FC SERIES - 5A, 10A, 20A, FILTER MODELS Operating Current (Amps) Insertion Loss* Differential Mode (dB) Insertion Loss* Common Mode (dB) Typical Resistance** (mOhms) Model 5 10 20 28 31 26 30 28 32 27 17 6.6 FC100V5A FC100V10A FC100V20A * Typical loss at 500 kHz (50 Ohms) ** Resistance Per Leg MECHANICAL DRAWINGS FC100V5A FC100V20A 1.00" (25.4mm) BOTTOM VIEW 2 0.390"(9.9mm) 0 -0.11"(-2.8mm) -0.15" (-3.8mm) 0 4 1 5 3 -0.11" 0 (-2.8mm) 0.780" (19.8mm) 0.700" (17.8mm) 0 1 0.200"(5.1mm) 2 0.400"(10.2mm) 0.600"(15.2mm) 5 3 4 BOTTOM VIEW FC100V10A -0.15" (-3.8mm) 0 -0.125"(-3.2mm) 0 0.475" (12.1mm) 1.700" (43.2mm) 0.100"(2.5mm) 7 0.300"(7.6mm) 8 0.500"(12.7mm) 9 1.65" 0.700"(17.8mm) (41.9mm) 3 4 0.44" (11.2mm) DIA 0.040" (1.0mm) 0.18"(4.6mm) MIN 1 1.00" (25.4mm) DIA 0.040" (1.0mm) 0.46" (11.7mm) 0.020" (0.51mm) 5 0.18"(4.6mm) MIN 2 2.00" (50.8mm) Pin 6 2.05" (52.1mm) BOTTOM VIEW 0.750"(19.1mm) 1.700" (43.2mm) -0.15"(-3.8mm) DIA 0.040" (1.0mm) 1.00" (25.4mm) 0.18"(4.6mm) MIN 0.780"(19.8mm) 0.40" (10.2mm) Function 5A Module Pin Pin Function 20A Module Function 1 10A Module Tolerances 2 -Vin -Vin 1 +Vin 1 +Vin 3 +Vin 2 3 Ground -Vin 2 4 +Vin 5 Ground 4 +Vout 3 4 -Vin Ground +Vout 6 5 -Vout 5 -Vout 7 -Vout -Vout 8 +Vout 9 +Vout REV. FEB 25, 2003 2 Inches: .XX 0.020 .XXX 0.010 Pin: 0.002 (Millimeters) .X 0.5 .XX 0.25 0.05 (Dimensions as listed unless otherwise specified.)