Anaren, Inc. | 6635 Kirkville Road | East Syracuse, NY 13057
800.411.6596 | www.anaren.com | AIR@anaren.com
The item described in this
product brief is part of our
total AIR Support soluon.
To learn more, visit our
website or just ask us!
Anaren Integrated Radio (AIR)
Low-power RF modules, rmware & development tools that make it easy to ’go wireless’
Features Benefits
Block diagram
Frequency range: 868-870 MHz
ETSI-compliant, shielded package
Digital RSSI output
Programmable output power up to +10dBm
High sensitivity (1.2 kBaud, 1% packet error rate)
-112 dBm at 869 MHz (compliant to ETSI)
Ultra-small package size: 9 x 16 x 2.5mm
LGA footprint
RoHS compliant
Operating temperature -40 to +85˚C
Impedance-controlled, multi-layer PCB
1.8 to 3.6 VDC
Low current consumption (15 mA in RX, 1.2
kBaud, 868 MHz )
200 nA sleep mode current consumption
Efficient SPI interface; all registers can be
programmed with one “burst” transfer
Available in tape & reel and matrix tray
Module weight approximately 0.4 grams
The A1101R08A is a high-performance, ETSI-compliant radio module that
incorporates the Texas Instruments CC1101 transceiver chip, all in the
industry’s smallest package: 9 x 16 x 2.5mm.
1101 Series
Minimal RF engineering experience necessary
No additional “Intentional Radiator”
certification required (ETSI EN 300 220)
Minimal real estate required
Easily implemented on a two layer PCB
No additional harmonic filtering required
100% RF-tested in production
Common footprint for similar products in family
No additional DC decoupling required
Integrated analog temperature sensor
Excellent receiver selectivity and blocking
performance
Suitable for frequency hopping systems,
thanks to a fast-settling frequency synthesizer
with 90 μs settling time
Impedance-matched balun for optimized
efficiency
Support for asynchronous and synchronous
serial receive/transmit mode for backwards
compatibility with existing radio
communication protocols
A1101R08A
PLEASE NOTE: Additional information on the Texas Instruments
CC1101 device can be found in the company’s latest datasheet
release at http://www.ti.com
This product is not to be used in any implantable medical device or external
medical device intended to regulate or monitor biological functions, including but
not limited to devices such as pacemakers, defibrillators, cardiac
resynchronization devices, pressure sensors, biochemical stimulators and
neurostimulators. ANAREN MAKES NO WARRANTY OF FITNESS OR
MERCHANTABILITY OF THIS PRODUCT FOR ANY USE OF THIS TYPE.
Anaren shall not be responsible for any consequential damages arising from the
sale or use of this product for any use of this type. The ultimate user of the
product assumes all risk of personal injury or death arising from a prohibited use.
The item described in this
product brief is part of our total
AIR Support solution. To learn
more, visit our website or just
ask us!
For more information
see product User’s
Manual, available
online.
Anaren Integrated Radio (AIR)
Low-power RF modules, rmware & development tools that make it easy to ’go wireless’
Anaren, Inc. | 6635 Kirkville Road | East Syracuse, NY 13057
800.411.6596 | www.anaren.com | AIR@anaren.com
Product overview Layout Information
Pin diagram
Nomenclature
The A1101R08A is a high-performance, ETSI-
compliant radio module that incorporates the
Texas Instruments CC1101 transceiver chip in the
industry’s smallest package (9 x 16 x 2.5mm) and
is compatible with all TI-approved software
stacks.
With an LGA pad footprint, this module is
designed to effortlessly integrate into a wide
range of applications, including: industrial control,
building automation, low-power wireless sensor
networks, lighting control, and automated meter
reading.
The A1101R08A has an RoHS-compliant ENIG
finish and is packaged on tape & reel or in matrix
trays for high-volume automated manufacturing.
NC = “NO Connection”
Pin is NOT connected
internally.
DNC = “Do Not Connect”
Pin reserved for internal
use, ensure mating
footprint pads are isolated.
GND = “Ground”
Connect the maximum
number possible (minimum
one for proper operation).
Caution! ESD sensitive device.
Precautions should be used when
handling the device in order to
prevent permanent damage.
A (Anaren)
1 Chip series (CC1101, CC110L, CC2500)
2 Function (R = radio only)
3 Frequency band (x100MHz)
4 Form factor (A = Internal Antenna, C = Connector)
5 Design ID (00 = Default)
6 Application (G = General)
7 Packaging (R = Tape/Reel, M = Matrix Tray)
Ground detail (corner) Ground detail (edge)
Footprint (PWB)
Refer to User’s Manual for additional layout guidelines.
Dimensions in mm.
Viewed from top side
1308a
