VS-45L(R), VS-150K(R), VS-150KS(R) Series www.vishay.com Vishay Semiconductors Standard Recovery Diodes, (Stud Version), 150 A FEATURES * Alloy diode * High current carrying capability * High surge current capabilities * Stud cathode and stud anode version * Designed and qualified for industrial level * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DO-8 (DO-205AA) TYPICAL APPLICATIONS * Battery chargers * Welders PRIMARY CHARACTERISTICS * Machine tool controls IF(AV) 150 A Package DO-8 (DO-205AA) Circuit configuration Single * High power drives * Medium traction applications * Freewheeling diodes MAJOR RATINGS AND CHARACTERISTICS PARAMETER TEST CONDITIONS IF(AV) I2t A TC 150 C 235 A 50 Hz 3570 60 Hz 3740 50 Hz 64 60 Hz 58 Range VRRM UNITS 150 IF(RMS) IFSM VALUES TJ A kA2s 100 to 600 V -40 to +200 C ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VS-45L(R) VS-150K(R) VS-150KS(R) VOLTAGE CODE VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 10 100 200 20 200 300 30 300 400 40 400 500 60 600 720 IRRM MAXIMUM AT TJ = 175 C mA 35 Revision: 11-Jan-18 Document Number: 93489 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-45L(R), VS-150K(R), VS-150KS(R) Series www.vishay.com Vishay Semiconductors FORWARD CONDUCTION PARAMETER SYMBOL Maximum average forward current at case temperature Maximum RMS forward current TEST CONDITIONS IF(AV) 180 conduction, half sine wave IF(RMS) DC at 142 C case temperature IFSM t = 8.3 ms 100 % VRRM reapplied t = 10 ms t = 8.3 ms No voltage reapplied t = 10 ms Maximum I2t for fusing I 2t Maximum I2t for fusing I2t t = 8.3 ms t = 8.3 ms A 150 C 3570 A 3740 3000 Sinusoidal half wave, initial TJ = TJ maximum 3140 64 58 100 % VRRM reapplied t = 10 ms UNITS 150 235 No voltage reapplied t = 10 ms Maximum peak, one cycle forward, non-repetitive surge current VALUES kA2s 45 41 t = 0.1 to 10 ms, no voltage reapplied 640 Low level value of threshold voltage VF(TO)1 (16.7 % x x IF(AV) < I < x IF(AV)), TJ = TJ maximum 0.67 High level value of threshold voltage VF(TO)2 (I > x IF(AV)), TJ = TJ maximum 0.83 kA2s V Low level value of forward slope resistance rf1 (16.7 % x x IF(AV) < I < x IF(AV)), TJ = TJ maximum 1.42 High level value of forward slope resistance rf2 (I > x IF(AV)), TJ = TJ maximum 0.91 Ipk = 471 A, TJ = 25 C, tp = 10 ms sinusoidal wave 1.33 V VALUES UNITS -40 to 200 C mW Maximum forward voltage drop VFM THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS Maximum junction operating and storage temperature range TJ, TStg Maximum thermal resistance, junction to case RthJC DC operation 0.25 Maximum thermal resistance, case to heatsink RthCS Mounting surface, smooth, flat and greased 0.10 K/W minimum Mounting torque 45L minimum 17.0 (150) 12.2 (108) Lubricated threads maximum minimum Mounting torque 150K 150KS 14.1 (125) Not lubricated threads maximum 15.0 (132) 11.3 (100) Not lubricated threads maximum minimum 14.1 (125) 9.5 (85) Lubricated threads maximum N*m (lbf * in) 12.5 (110) Approximate weight 45L Case style N*m (lbf * in) 100 g 3.5 oz. DO-30 (DO-205AC) 150K-A See dimensions - link at the end of datasheet DO-8 (DO-205AA) 150KS B-42 RthJC CONDUCTION CONDUCTION ANGLE SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION 180 0.031 0.023 120 0.038 0.040 90 0.048 0.053 60 0.071 0.075 30 0.120 0.121 TEST CONDITIONS UNITS TJ = TJ maximum K/W Note * The table above shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC Revision: 11-Jan-18 Document Number: 93489 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-45L(R), VS-150K(R), VS-150KS(R) Series Vishay Semiconductors 200 Maximum Allowable Case Temperature (C) Maximum Allowable Case Temperature (C) www.vishay.com 45L...,150... Series RthJC (DC) = 0.25 K/ W 190 180 Conduction Angle 170 160 30 150 60 90 120 180 140 0 20 40 60 80 100 120 140 160 200 45L..., 150... Series R thJC (DC) = 0.25 K/ W 190 180 Conduction Period 170 160 30 180 140 0 50 Average Forward Current (A) 250 1 K/ W .1 =0 SA R th K/ W 0.2 W K/ 0.3 W K/ K/ W K/ W RMS Limit 100 elt -D 1.5 K/ W 80 aR Maximum Average Forward Power Loss (W) 200 4 0. 0. 8 W K/ 120 6 0. 140 150 Fig. 2 - Current Ratings Characteristics 180 120 90 60 30 160 100 DC Average Forward Current (A) Fig. 1 - Current Ratings Characteristics 180 60 90 120 150 2K /W 60 Conduction Angle 40 45L..., 150... Series TJ = 200C 20 3 K/ W 0 0 40 80 120 160 25 Average Forward Current (A) 50 75 100 125 150 175 200 Maximum Allowable Ambient Temperature (C) 250 R th 2 0. SA K/ W W K/ .1 =0 W K/ a e lt -D 0. 8 K/ W 1K /W RMS Limit 1.5 Conduc tion Period 45L..., 150... Series TJ = 200C 50 2 K/ R 100 W K/ 150 0. 6 W K/ 200 4 0. DC 180 120 90 60 30 3 0. Maximum Average Forward Power Loss (W) Fig. 3 - Forward Power Loss Characteristics K/ W W 3 K/W 0 0 50 100 150 200 Average Forward Current (A) 250 25 50 75 100 125 150 175 200 Maximum Allowable Ambient Temperature (C) Fig. 4 - Forward Power Loss Characteristics Revision: 11-Jan-18 Document Number: 93489 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-45L(R), VS-150K(R), VS-150KS(R) Series 3500 Vishay Semiconductors Peak Half Sine Wave Forward Current (A) Peak Half Sine Wave Forward Current (A) www.vishay.com At Any Ra ted Load Condition And With Rated V RRM Applied Following Surge. Initial TJ = 200C @60 Hz 0.0083 s @50 Hz 0.0100 s 3000 2500 2000 1500 1000 45L..., 150... Series 500 1 10 100 4000 3500 3000 Maximum Non Repetitive Surge Current Versus Pulse Train Dura tion. Initial TJ = 200C No Voltage Reapplied Rated VRRM Reapplied 2500 2000 1500 1000 45L..., 150... Series 500 0.01 Numb er Of Equal Amplitude Half Cycle Current Pulses (N) 0.1 1 Pulse Train Duration (s) Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current Instantaneous Forward Current (A) 10000 1000 TJ = 25C 100 TJ = 200C 45L...,150... Series 10 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Instantaneous Forward Voltage (V) Transient Thermal Impedance ZthJC (K/W) Fig. 7 - Forward Voltage Drop Characteristics 1 Steady State Value RthJC = 0.25 K7W (DC Operation) 0.1 45L..., 150... Series 0.01 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance ZthJC Characteristics Revision: 11-Jan-18 Document Number: 93489 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-45L(R), VS-150K(R), VS-150KS(R) Series www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- 45 L R 60 1 2 3 4 5 1 - Vishay Semiconductors product 2 - 45 = standard version 3 - L = essential part number 4 - R = stud reverse polarity (anode to stud) None = stud normal polarity (cathode to stud) 5 - Voltage code x 10 = VRRM (see Voltage Ratings table) Device code VS- 15 0 K R 60 A 1 2 3 4 5 6 7 1 - Vishay Semiconductors product 2 - 15 = essential part number 3 - 0 = standard device 4 - Case style: K = DO-8 (DO-205AA) KS = B-42 5 - R = stud reverse polarity (anode to stud) None = stud normal polarity (cathode to stud) 6 - Voltage code x 10 = VRRM (see Voltage Ratings table) 7 - A = essential part number for 150K (omitted for 150KS) Note * For metric device M12 x 1.75 contact factory LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95314 Revision: 11-Jan-18 Document Number: 93489 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors DO-205AC (DO-30), DO-205AA (DO-8) and B-42 for 45L(R), 150K(R) and 150KS(R) Series DIMENSIONS FOR 45L(R) SERIES - DO-205AC (DO-30) in millimeters (inches) 15.30 (0.60) MAX. O 7.39 (0.297) O 6.50 (0.255) 8.30 (0.327) 7.55 (0.297) 17.30 (0.681) 11.70 (0.460) O 23.30 (0.92) MAX. 137.67 (5.42) 132.58 (5.22) 23.30 (0.917) MAX. 8.48 (0.333) 7.88 (0.310) 17.0 (0.67) 15.0 (0.59) 27.00 (1.06) MAX. Across flats 1/2"-20UNF-2A Revision: 29-Feb-16 Document Number: 95314 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors DIMENSIONS FOR 150K(R) SERIES - DO-205AA (DO-8) in millimeters (inches) 15.30 (0.60) MAX. O 7.39 (0.297) O 6.50 (0.255) 17.30 (0.681) 11.70 (0.460) O 23.30 (0.92) MAX. 124.00 (4.881) 111.13 (4.375) 23.30 (0.917) MAX. 8.48 (0.333) 7.88 (0.310) 17.0 (0.67) 15.0 (0.59) 27.00 (1.06) MAX. Across flats 3/8"-24UNF-2A (1) Note (1) For metric device M12 x 1.75 contact factory Revision: 29-Feb-16 Document Number: 95314 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors DIMENSIONS FOR 150KS(R) SERIES - B-42 in millimeters (inches) 27.17 (1.070) 26.22 (1.032) 2.03 (0.080) 1.27 (0.050) 21.47 (0.843) 21.20 (0.835) 10.2 (0.401) 9.2 (0.362) O 4.34 (0.171) O 4.09 (0.161) 4.08 (0.161) 3.70 (0.146) 9.50 (0.374) 7.50 (0.295) 37.13 (1.462) 33.83 (1.332) 18.00 (0.708) 14.00 (0.551) 6.76 (0.266) 6.25 (0.246) 12.50 (0.492) 11.70 (0.460) 3/8"-24UNF-2A Revision: 29-Feb-16 Document Number: 95314 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: VS-150K20A VS-150K40A VS-45L10 VS-45L40 VS-45L60 VS-45LR20 VS-45LR60 VS-45LR10 VS-45L20 VS150K10A VS-150KS20 VS-150KS60 VS-150KR40A VS-150KS10 VS-150KS30 VS-150KSR10 VS-150KSR30 VS150K30A VS-150K60A VS-150KR20A VS-150KR30A VS-150KR60A VS-150KSR20 VS-150KSR40 VS-150KS40 VS-45LR40 VS-150KR10A VS-150KSR60 VS-150K40AM