SBL(F,B)2030CT & SBL(F,B)2040CT
Vishay General Semiconductor
Document Number: 88730
Revision: 25-Apr-08
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
www.vishay.com
1
Dual Common-Cathode Schottky Rectifier
FEATURES
Guardring for overvoltage protection
Lower power losses, high efficiency
Low forward voltage drop
High forward surge capability
High frequency operation
Meets MSL level 1, per J-STD-020, LF maximum
peak of 245 °C (for TO-263AB package)
Solder dip 260 °C, 40 s (for TO-220AB and
ITO-220AB package)
Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
For use in low voltage, high frequency rectifier of
switching mode power supplies, freewheeling diodes,
dc-to-dc converters and polarity protection application.
MECHANICAL DATA
Case: TO-220AB, ITO-220AB, TO-263AB
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix for consumer grade, meets JESD 201 class
1A whisker test, HE3 suffix for high reliability grade
(AEC Q101 qualified), meets JESD 201 class 2
whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
PRIMARY CHARACTERISTICS
IF(AV) 10 A x 2
VRRM 30 V, 40 V
IFSM 250 A
VF0.60 V
TJ max. 150 °C
TO-263AB
CASE
PIN 2
PIN 1
PIN 3
TO-220AB
SBL20xxCT
ITO-220AB
SBLF20xxCT
SBLB20xxCT
PIN 1
PIN 2
K
HEATSINK
1
23
1
2
K
PIN 2
PIN 1
PIN 3
123
MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
PARAMETER SYMBOL SBL2030CT SBL2040CT UNIT
Maximum repetitive peak reverse voltage VRRM 30 40 V
Working peak reverse voltage VRWM 21 28 V
Maximum DC blocking voltage VDC 30 40 V
Maximum average forward rectified current at TC = 105 °C total device
per diode IF(AV) 20
10 A
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load per diode IFSM 250 A
Peak repetitive reverse surge current per diode at tp = 2.0 µs, 1 kHz IRRM 1.0 A
Operating junction and storage temperature range TJ, TSTG - 55 to + 150 °C
Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min VAC 1500 V
SBL(F,B)2030CT & SBL(F,B)2040CT
Vishay General Semiconductor
www.vishay.com For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
Document Number: 88730
Revision: 25-Apr-08
2
Note:
(1) Pulse test: 300 µs pulse width, 1 % duty cycle
Note:
(1) Automotive grade AEC Q101 qualified
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT
Maximum instantaneous forward voltage per diode (1) 10 A VF0.6 V
Maximum instantaneous current at rated DC blocking
voltage per diode (1)
TC = 25 °C
TC = 100 °C IR
1.0
50 mA
THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER SYMBOL SBL SBLF SBLB UNIT
Typical thermal resistance from junction to case per diode RθJC 2.0 4.0 2.0 °C/W
ORDERING INFORMATION (Example)
PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE
TO-220AB SBL2030CT-E3/45 1.85 45 50/tube Tube
ITO-220AB SBLF2030CT-E3/45 1.99 45 50/tube Tube
TO-263AB SBLB2030CT-E3/45 1.35 45 50/tube Tube
TO-263AB SBLB2030CT-E3/81 1.33 81 800/reel Tape and reel
TO-220AB SBL2030CTHE3/45 (1) 1.85 45 50/tube Tube
ITO-220AB SBLF2030CTHE3/45 (1) 1.99 45 50/tube Tube
TO-263AB SBLB2030CTHE3/45 (1) 1.35 45 50/tube Tube
TO-263AB SBLB2030CTHE3/81 (1) 1.33 81 800/reel Tape and reel
Figure 1. Forward Current Derating Curve
0
15
20
30
25
0 50 100 150
10
5
Lead Temperature (°C)
Average Forward Rectified Current (A)
Resistive or Inductive Load
TJ = 150 °C
Figure 2. Maximum Non-Repetitive Peak Forward Surge
Current Per Diode
0
50
100
150
250
200
1 10010
300
TJ = TJ Max.
8.3 ms Single Half Sine-Wave
Number of Cycles at 60 Hz
Peak Forward Surge Current (A)
SBL(F,B)2030CT & SBL(F,B)2040CT
Vishay General Semiconductor
Document Number: 88730
Revision: 25-Apr-08
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
www.vishay.com
3
Figure 3. Typical Instantaneous Forward Characteristics Per Diode
Figure 4. Typical Reverse Characteristics Per Diode
00.2 0.4 0.6 0.81.0 1.2
0.01
0.1
10
1
100
TJ = 25 °C
Pulse Width = 300 µs
1 % Duty Cycle
TJ = 125 °C
Instantaneous Forward Volta
g
e (V)
Instantaneous Forward Current (A)
0.001
0.01
1
10
100
0.1
T
J
= 150 °C
T
J
= 25 °C
T
J
= 75 °C
Percent of Rated Peak Reverse Voltage (%)
Instantaneous Reverse Leakage
Current (mA)
020406080 100
Figure 5. Typical Junction Capacitance Per Diode
Figure 6. Typical Transient Thermal Impedance Per Diode
0.1 101 100
10 000
1000
100
T
J
= 25 °C
f = 1.0 MHz
V
sig
= 50 mVp-p
Reverse Voltage (V)
Junction Capacitance (pF)
0.10.01 101 100
100
10
1
0.1
SBL, SBLB
SBLF
t - Pulse Duration (s)
Transient Thermal Impedance (°C/W)
SBL(F,B)2030CT & SBL(F,B)2040CT
Vishay General Semiconductor
www.vishay.com For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
Document Number: 88730
Revision: 25-Apr-08
4
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-220AB
0.113 (2.87)
0.103 (2.62)
0.370 (9.40)
0.360 (9.14)
0.415 (10.54) MAX.
0.635 (16.13)
0.625 (15.87)
PIN
0.160 (4.06)
0.140 (3.56)
0.057 (1.45)
0.045 (1.14)
0.105 (2.67)
0.095 (2.41)
0.104 (2.65)
0.096 (2.45) 0.205 (5.20)
0.195 (4.95)
0.035 (0.90)
0.028 (0.70)
0.154 (3.91)
0.148 (3.74)
13
2
0.185 (4.70)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
0.145 (3.68)
0.135 (3.43)
0.350 (8.89)
0.330 (8.38)
1.148 (29.16)
1.118 (28.40)
0.560 (14.22)
0.530 (13.46)
0.022 (0.56)
0.014 (0.36)
0.110 (2.79)
0.100 (2.54)
0.603 (15.32)
0.573 (14.55)
ITO-220AB
0.076 (1.93) REF.
45° REF.
PIN
321
0.404 (10.26)
0.384 (9.75)
0.076 (1.93) REF.
0.600 (15.24)
0.580 (14.73)
0.560 (14.22)
0.530 (13.46)
0.057 (1.45)
0.045 (1.14)
0.057 (1.45)
0.045 (1.14)
0.191 (4.85)
0.171 (4.35)
0.671 (17.04)
0.651 (16.54)
0.035 (0.89)
0.025 (0.64)
0.205 (5.21)
0.195 (4.95)
0.025 (0.64)
0.015 (0.38)
0.105 (2.67)
0.095 (2.41)
0.028 (0.71)
0.020 (0.51)
0.110 (2.79)
0.100 (2.54)
7° REF.
0.135 (3.43) DIA.
0.122 (3.08) DIA.
0.110 (2.79)
0.100 (2.54)
0.190 (4.83)
0.170 (4.32)
7° REF.
7° REF.
0.140 (3.56) DIA.
0.125 (3.17) DIA.
0.350 (8.89)
0.330 (8.38)
TO-263AB
Mounting Pad Layout
0.670 (17.02)
0.591 (15.00)
0.105 (2.67)
0.095 (2.41)
0.08 (2.032) MIN.
0.15 (3.81) MIN.
0.33 (8.38) MIN.
0.42 (10.66) MIN.
12
K
K
0.140 (3.56)
0.110 (2.79)
0.021 (0.53)
0.014 (0.36)
0.110 (2.79)
0.090 (2.29)
0 to 0.01 (0 to 0.254)
0.055 (1.40)
0.047 (1.19)
0.055 (1.40)
0.045 (1.14)
0.190 (4.83)
0.160 (4.06)
0.205 (5.20)
0.195 (4.95)
0.624 (15.85)
0.591 (15.00)
0.037 (0.940)
0.027 (0.686)
0.105 (2.67)
0.095 (2.41)
0.360 (9.14)
0.320 (8.13)
0.411 (10.45)
0.380 (9.65)
0.245 (6.22)
MIN.
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.