SMD B 22-23/R6GHBHC-A01/2C Features Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Multi-color type. Pb-free. The product itself will remain within RoHS compliant version. Descriptions The 22-23 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc. Applications * Backlighting in dashboard and switch. * Telecommunication: indicator and backlighting in telephone and fax. * Flat backlight for LCD, switch and symbol. * General use. 1 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : 29-Apr-2013 Issue No: DSE-0002063 Rev:5 www.everlight.com DATASHEET SMD B 22-23/R6GHBHC-A01/2C Device Selection Guide Chip Materials Emitted Color AlGaInP Brilliant Red InGaN Brilliant Green InGaN Blue Resin Color Water Clear Absolute Maximum Ratings (Ta=25) Parameter Symbol Rating Unit Reverse Voltage VR V Forward Current IF 5 R6:25 GH:25 BH:25 R6:60 GH:95 BH:100 R6:60 GH:95 BH:95 -40 ~ +85 -40 ~ +90 R6:2000 GH:2000 BH:2000 Peak Forward Current (Duty 1/10 @1KHz) IFP Power Dissipation Pd Operating Temperature Topr Storage Temperature Tstg Electrostatic Discharge(HBM) ESDHBM Soldering Temperature Tsol 2 mA mA mW V Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec. Copyright (c) 2010, Everlight All Rights Reserved. Release Date : 29-Apr-2013 Issue No: DSE-0002063 Rev:5 www.everlight.com DATASHEET SMD B 22-23/R6GHBHC-A01/2C Electro-Optical Characteristics (Ta=25) Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current Symbol Iv 21/2 p d VF IR Min. Typ. Max. R6 45.0 GH 112 BH 28.5 ----- 180 ----- 450 ----- 112 ----- 120 ----- R6 ----GH ----BH ----- 632 ----- 518 ----- 468 ----- R6 615 GH 510 BH 460 ----- 630 ----- 540 ----- 480 R6 ----GH ----BH ----- 20 ----- 35 ----- 25 ----- R6 1.7 GH 2.7 BH 2.7 R6 ----- 2.0 2.4 3.3 3.7 3.3 3.7 ----- 10 Unit Condition mcd deg nm nm IF=20mA nm V A VR=5V Note: 1. Tolerance of Luminous Intensity: 11% 2. Tolerance of Dominant Wavelength: 1nm 3. Tolerance of Forward Voltage: 0.1V 3 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : 29-Apr-2013 Issue No: DSE-0002063 Rev:5 www.everlight.com DATASHEET SMD B 22-23/R6GHBHC-A01/2C R6 Bin Range of Luminous Intensity Bin Code Min. Max. Unit Condition P Q R 45.0 72.0 112 72.0 112 180 mcd IF =20mA GH Bin Range of Luminous Intensity Bin Code. Min. Max. Unit Condition R S T 112 180 285 180 285 450 mcd IF =20mA BH Bin Range of Luminous Intensity Bin Code Min. Max. Unit Condition N P Q 28.5 45.0 72.0 45.0 72.0 112 mcd IF =20mA Note: Tolerance of Luminous Intensity: 11% 4 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : 29-Apr-2013 Issue No: DSE-0002063 Rev:5 www.everlight.com DATASHEET SMD B 22-23/R6GHBHC-A01/2C Typical Electro-Optical Characteristics Curves R6 Forward Current vs. Forward Voltage Ta=25C 100 Forward Current IF (mA) Relative luminous intensity (%) Spectrum Distribution 75 50 25 40 30 25 20 10 0 500 550 600 650 Wavelength (nm) 0 1.2 700 Forward Current Relative luminous intensity (%) Relative luminous intensity (%) Ambient Temperature 1000 100 10 1 -60 -40 -20 1.6 2.0 2.4 2.8 3.0 Forward Voltage VF (V) Luminous Intensity vs. Luminous Intensity vs. 0 20 40 60 80 100 Ta=25C 1000 100 10 1 0 10 10 1 10 2 Forward Current IF (mA) Ambient Temperature Ta (C) Radiation Diagram Forward Current Derating Curve Forward Current IF (mA) Ta=25C 50 0 50 Ta=25C 10 20 30 40 30 25 20 10 0 40 1.0 0.9 50 0.8 60 70 80 90 0.7 0 20 40 60 85 100 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature Ta (C) 5 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : 29-Apr-2013 Issue No: DSE-0002063 Rev:5 www.everlight.com DATASHEET SMD B 22-23/R6GHBHC-A01/2C Typical Electro-Optical Characteristics Curves GH Spectrum Distribution Forward Current vs. Forward Voltage Ta=25C 50 I (mA) 100 40 F 75 30 Forward Current Relative luminous intensity (%) Ta=25 50 25 0 400 500 450 550 25 20 10 0 2.6 600 Wavelength (nm) Relative luminous intensity (%) Relative luminous intensity (%) 3.4 Ambient Temperature 1000 100 10 1000 4.5 100 10 1 10 0 20 40 60 80 100 10 10 Forward Current IF(mA) Radiation Diagram Forward Current Derating Curve 0 50 IF(mA) 4.2 Luminous Intensity vs Forward Current Ta=25C Ambient Temperature Ta (C) Forward Current 3.8 Forward Voltage VF (V) Luminous Intensity vs. 1 -60 -40 -20 3.0 Ta=25C 10 20 30 40 40 30 25 1.0 20 0.9 50 0.8 60 10 70 0.7 0 0 20 40 60 85 100 80 90 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature Ta (C) 6 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : 29-Apr-2013 Issue No: DSE-0002063 Rev:5 www.everlight.com DATASHEET SMD B 22-23/R6GHBHC-A01/2C Typical Electro-Optical Characteristics Curves BH Forward Current vs. Forward Voltage 75 50 25 0 400 450 500 550 50 40 30 25 20 10 0 2.6 600 Wavelength (nm) 3.8 4.2 Forward Current Ambient Temperature Relative luminous intensity (%) Relative luminous intensity (%) 3.4 4.5 Luminous Intensity vs. 1000 100 10 1 -60 -40 -20 3.0 Forward Voltage VF (V) Luminous Intensity vs. 0 20 40 60 80 100 Ta=25C 1000 100 10 1 10 2 1 10 10 Forward Current IF (mA) Ambient Temperature Ta (C) Radiation Diagram 0 10 Forward Current Derating Curve Forward Current IF (mA) Ta=25C Ta=25C 100 Forward Current IF (mA) Relative luminous intensity (%) Spectrum Distribution 50 Ta=25C 20 30 40 40 1.0 30 25 20 10 0 0.9 50 0.8 60 70 0.7 0 20 40 60 85 100 80 90 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature Ta (C) 7 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : 29-Apr-2013 Issue No: DSE-0002063 Rev:5 www.everlight.com DATASHEET SMD B 22-23/R6GHBHC-A01/2C Package Dimension Green Mask Polarity Note: Tolerances unless mentioned 0.1mm. Unit = mm Suggested pad dimension is just for reference only. Please modify the pad dimension based on individual need. 8 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : 29-Apr-2013 Issue No: DSE-0002063 Rev:5 www.everlight.com DATASHEET SMD B 22-23/R6GHBHC-A01/2C Moisture Resistant Packing Materials Label Explanation Pb EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS CPN: Customer's Product Number P/N: Product Number QTY: Packing Quantity CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank LOT No: Lot Number XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is 0.1mm , Unit = mm 9 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : 29-Apr-2013 Issue No: DSE-0002063 Rev:5 www.everlight.com DATASHEET SMD B 22-23/R6GHBHC-A01/2C Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel Note: Tolerances unless mentioned 0.1mm. Unit = mm Moisture Resistant Packing Process Label Aluminum moisture-proof bag Desiccant Label Note: Tolerances unless mentioned 0.1mm. Unit = mm 10 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : 29-Apr-2013 Issue No: DSE-0002063 Rev:5 www.everlight.com DATASHEET SMD B 22-23/R6GHBHC-A01/2C Precautions for Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 260C Max. 10sec. Max. Above255C 30sec.Max. 3C/sec.Max. 6C/sec.Max. Pre-heating Above 217C 60~150sec. 150~200C 60~120sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 11 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : 29-Apr-2013 Issue No: DSE-0002063 Rev:5 www.everlight.com DATASHEET SMD B 22-23/R6GHBHC-A01/2C Application Restrictions High reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. If you have any concerns, please contact Everlight before using this product in your application. This specification guarantees the quality and performance of the product as an individual component. Do not use this product beyond the specification described in this document. 12 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : 29-Apr-2013 Issue No: DSE-0002063 Rev:5 www.everlight.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Everlight: 22-23/R6GHBHC-A01/2C