Key Features
Test HDMI and HDBaseT cables,
devices, components and entire
video distribution networks end
to end up to 18G (HDMI).
Verify video and audio
transmission through a video
distribution network.
NEW! Calibrate color, brightness,
contrast and gamma on UHD TVs
with industry standard CalMan
software
Verify hot plug, +5V and protocols,
such as HDCP, EDID and NEW!
HDR metadata, through the
distribution network end to end.
Check interoperability between
video sources, displays and
distribution equipment.
Diagnose video and protocol
failures in cables (including NEW!
HDBaseT in Long Reach mode),
video distribution devices and
components.
Simple Pass/Fail test indication
on LCD display offers quick
“Time-to-Insight.”
Test reports provide HTML
formatted reports of tests
performed to demonstrate proper
network turn up.
Battery powered
Handy optional carrying case
available
Diagnose and Troubleshoot
Installing UHD video distribution networks whether in residences or commercial,
industrial or institutional facilities is complex. These installations do not all go well.
A variety of failure conditions can occur such as no video, degraded video, flashing
video, unexpected video, etc. These failures point to a range of underlying
problems.
Whether verifying an HDMI cable or a re-terminated HDBaseT cable run, checking
an HDBaseT extender, testing the EDID handling of an HDMI switch, checking
HDCP content protection protocols or just verifying a video distribution network
end-to-end, this compact, affordable 280 set will save you time on site, reduce
callbacks and provide you with assurance that the video distribution network you
just installed will run problem free.
Ease of Use
The 280 is battery powered with an embedded touch screen. It provides ease of
use and fast Time-to-Insight when testing cables and distribution gear and
checking interoperability between video components and diagnosing failures.
DRAFT #3
v0830
1-800-909-7211
teledynelecroy.com
©2018 Teledyne LeCroy. All rights reserved. Specifications, prices, availability and delivery subject to change without notice.
Product or brand names are trademarks or requested trademarks of their respective holders.
Local sales offices are located throughout the world.
Visit our website to find the most convenient location.
SPECIFICATIONS
HDMI
Version
HDMI 2.0
Standard Formats
VESA (DMT, CVT
-R, CVT), CEA
Connector
(1) Type A 280G; (1) Type A 280A
Protocol
HDMI,
DVI
Video
Colorimetry
ITU
-R BT.601-5, ITU-R BT.709-5, BT.2020 (Rx only)
Video
Max Pixel Rate
18G bps data rate; 600 MHz pixel rate (
upscaled from 1080p)
Video
Encoding / Sampling
RGB,
YCbCr; 4:4:4, 4:2:2, 4:2:0
HDCP
Versions
1.4 & 2.2
Audio Formats
2Channel LPCM
HDBaseT
Version
HDBaseT 1.0
Standard
Formats
VESA (DMT, CVT
-R, CVT), CEA
Connector
(1) 8P8C (RJ
-45) Tx; (1) RJ-45 Rx
Video
Colorimetry
ITU
-R BT.601-5, ITU-R BT.709-5
Video
Max Pixel Rate
300 MHz;
NEW! Supports Long Reach mode
Video
Encoding / Sampling
RGB,
YCbCr; 4:4:4, 4:2:2, 4:2:0
HDCP
Version
s 1.4 & 2.2
Audio Formats
2Channel LPCM
Instrument (each unit)
AC Adapter/Charger
100
-120 VAC, 47-63Hz
Battery
Minimum 4 hours continuous use on 8 hour charge
Micro SD Card Slot
For saving
and retrieving test reports, EDIDs and software upgrade files
LCD
Display
480 (H); x 272 (V) resolution; 4.3” diagonal
Weight (each unit)
0.95 LBS (0.358 Kg)
Size (each
unit)
Height: 7.1 in. (18.04 cm) Width: 7.4 in. (18.79
cm) Depth: 1.25 in. (3.18 cm)
Environmental
Operating Temp: 32 to 104 (F);
0 to 40 (C)
Benefits
Shortens time on job site.
Reduces callbacks and truck rolls.
Simplifies testing process.
Verifies network components and
design
Tests Supported
280G
Transmitter
- Video Format Test
Select from common standard
CEA and VESA formats
- Video Pattern Test
Select from several test patterns; patterns
above 1080p are up-scaled to 4K
- Hot plug detect
Check
hot plug voltage from connected sink (e.g. UHD TV)
- HDCP active
Verify
HDCP; select version 1.4 or 2.2
- EDID Test
View summary of EDID contents of connected sink or entire downstream network
- HDR Test
Verify
that HDR metatdata is transmitted through the network
- Audio Test
Generate LPCM audio
test tone to check continuity end-to-end
- CalMan
NEW!
Color calibration S/W for brightness, contrast, RGB balance and gamma
280A Receiver
- Video Format Test
Verify
incoming video timing from a UHD source
- Video Test
View
incoming video on embedded screen; view pixel values up to 150MHz pixel rate
- +5V
Check
+5V from a UHD source
- HDCP Active
Verify
HDCP operation; version 1.4 or 2.2
- EDID Test
Emulate EDIDs to test response
of source or entire upstream network
- HDR Test
NEW!
Verify that HDR metatdata is transmitted through the network
- Link / Cable Test
Test HDMI or HDBaseT cable runs
- Audio Test
Verify LPCM audio end
-to-end
The Teledyne LeCroy quantumdata 280 Test Set is a combination test
instrument set comprised of an HDMI/HDBaseT Video Generator (Tx) and
Analyzer (Rx). Each device is small compact and battery powered. The 280
Test Set is ideally suited for professional A/V integrators and home theatre
installers. This feature-rich test set enables you to conduct basic
verification and diagnostic tests on HDMI/HDBaseT cables, video
distribution networks and individual A/V components. The HDMI input and
output ports support testing up to 18 Gbps data rate and 600 MHz pixel
rate and the HDBaseT input and output ports support testing up to 300
MHz pixel rate (Long Reach mode supported up to 1080p).
The instrument set’s features and convenient operation can shorten time
on the job site and reduce callbacks by enabling you to run basic
verification and diagnostic tests on complex video distribution installations
quickly and efficiently.
This convenient test Instrument set can pay for itself by eliminating
truck rolls and shortening time on the job site.
280G Video Generator 280A Video Analyzer
quantumdata™
280 Test Set
280G Video Generator
280A Video Analyzer
Portable, Feature Rich &Affordable!
Now verify HDR metadata end to end!
SOURCE TESTING OR TESTING DISTRIBUTION NETWORK UPSTREAM SINK TESTING OR TESTING DISTRIBUTION NETWORK DOWNSTREAM
Verify and Troubleshooting a Video Network Downstream
In the example below the 280G Tx is placed at the source end. The 280G Tx will serve as an HDMI 4K video source and
check various video resolutions and video settings. You can also verify the hot plug voltage and check for a valid EDID.
HDCP can be verified as well using either HDCP 1.4 or HDCP 2.2. If you encounter problems you can segment the
network by moving the 280G Tx downstream to run further tests at various points in the network. In this case the 280G
Tx can serve either as an HDMI or an HDBaseT source. Segmenting the network enables you to determine where the
failure occurs—to identify the problem device or cable.
Verify and Troubleshooting a Video Network Upstream
In the example below the 280A Rx unit serves as a 4K video display to verify various video resolutions, bit depth settings,
colorimetry, sampling, NEW! HDR, etc. You can also verify the +5V and emulate an EDID to verify that the upstream network is
passing it through to the source properly. HDCP can be verified as well using either HDCP 1.4 or HDCP 2.2. If you encounter
problems you can segment the network by moving the 280A Rx upstream to run further tests. In this case the 280A Rx can
serve either as an HDMI or an HDBaseT sink. Segmenting the network either from the upstream direction of the downstream
direction enables you to determine where the failure occurs.
HDMI Switch
HDMI/HDBaseT
Extender Pair
HDMI A/V
Scaler
HDMI UHD TV
Move 280G Tx to various points in the network
to determine problem component or cable
280G Tx
HDMI/HDBaseT
Extender Pair
HDMI A/V Rx
Scaler
HDMI
Switch
HDMI UHD Source
Move 280A Rx to various points in the network
to determine problem component or cable 280A Rx
280A Main Stream
280A Video
Analyzer Screen
280A Video
Display Screen
280G Main Stream
280G EDID Test Screen
280G HDCP 2.2
Test Screen
2.2
SOURCE TESTING OR TESTING DISTRIBUTION NETWORK UPSTREAM SINK TESTING OR TESTING DISTRIBUTION NETWORK DOWNSTREAM
Verify and Troubleshooting a Video Network Downstream
In the example below the 280G Tx is placed at the source end. The 280G Tx will serve as an HDMI 4K video source and
check various video resolutions and video settings. You can also verify the hot plug voltage and check for a valid EDID.
HDCP can be verified as well using either HDCP 1.4 or HDCP 2.2. If you encounter problems you can segment the
network by moving the 280G Tx downstream to run further tests at various points in the network. In this case the 280G
Tx can serve either as an HDMI or an HDBaseT source. Segmenting the network enables you to determine where the
failure occurs—to identify the problem device or cable.
Verify and Troubleshooting a Video Network Upstream
In the example below the 280A Rx unit serves as a 4K video display to verify various video resolutions, bit depth settings,
colorimetry, sampling, NEW! HDR, etc. You can also verify the +5V and emulate an EDID to verify that the upstream network is
passing it through to the source properly. HDCP can be verified as well using either HDCP 1.4 or HDCP 2.2. If you encounter
problems you can segment the network by moving the 280A Rx upstream to run further tests. In this case the 280A Rx can
serve either as an HDMI or an HDBaseT sink. Segmenting the network either from the upstream direction of the downstream
direction enables you to determine where the failure occurs.
HDMI Switch
HDMI/HDBaseT
Extender Pair
HDMI A/V
Scaler
HDMI UHD TV
Move 280G Tx to various points in the network
to determine problem component or cable
280G Tx
HDMI/HDBaseT
Extender Pair
HDMI A/V Rx
Scaler
HDMI
Switch
HDMI UHD Source
Move 280A Rx to various points in the network
to determine problem component or cable 280A Rx
280A Main Stream
280A Video
Analyzer Screen
280A Video
Display Screen
280G Main Stream
280G EDID Test Screen
280G HDCP 2.2
Test Screen
2.2
APPLICATIONS – QUALIFYING NETWORK INFRASTRUCTURE
Verifying a Video Link End-to-End
The 280 Installation test set enables installers to check a video distribution network prior to the delivery of the video
source and display components. The 280G Tx device can be placed at the source end and the 280A Rx device at the far
end where the display will be mounted. A series of tests can be run to verify the link bandwidth capability up to
4K@60Hz even if the link will only be transmitting 1080p initially. This enables you to future proof the link. The test set
can test for basic signal integrity and even test protocols such as HDCP (content protection), EDID and NEW! HDR
metadata transmission. When failures occur individual component devices and cables can be tested separately.
Verify Individual Cables, Devices and Components
If you encounter a distribution link problem during qualification testing (above), the 280 test set enables you to test each
distinct element: cables, extender, switches, scaler etc. to quickly identify the root cause of a link failure. NEW! You can
test HDBaseT links in “Long Reach” mode as well. Here are just a few examples below:
280G Tx
HDMI Switch
280A Rx
280G Tx 280A Rx 280G Tx 280A Rx
280G Tx
280A Rx
Test HDMI switch and HDMI cables for
EDID, HDCP and video formats.
Test signal quality of HDMI or
HDBaseT Cat cable run.
Test HDMI/HDBaseT extender. 280G Tx
serves as HDMI source; 280A Rx serves
as HDBaseT receiver.
HDMI A/V Rx/Scaler
Test HDMI scaler for EDID, HDCP
and video formats.
HDMI Switch
HDMI/HDBaseT
Extender Pair
HDMI A/V Rx/Scaler
280G Tx 280A Rx
Run end-to-end video and protocol tests
to check the video distribution network
cables and components for up to 4K video
transmission and HDCP 2.2.
Key Features
Test HDMI and HDBaseT cables,
devices, components and entire
video distribution networks end
to end up to 18G (HDMI).
Verify video and audio
transmission through a video
distribution network.
NEW! Calibrate color, brightness,
contrast and gamma on UHD TVs
with industry standard CalMan
software
Verify hot plug, +5V and protocols,
such as HDCP, EDID and NEW!
HDR metadata, through the
distribution network end to end.
Check interoperability between
video sources, displays and
distribution equipment.
Diagnose video and protocol
failures in cables (including NEW!
HDBaseT in Long Reach mode),
video distribution devices and
components.
Simple Pass/Fail test indication
on LCD display offers quick
“Time-to-Insight.”
Test reports provide HTML
formatted reports of tests
performed to demonstrate proper
network turn up.
Battery powered
Handy optional carrying case
available
Diagnose and Troubleshoot
Installing UHD video distribution networks whether in residences or commercial,
industrial or institutional facilities is complex. These installations do not all go well.
A variety of failure conditions can occur such as no video, degraded video, flashing
video, unexpected video, etc. These failures point to a range of underlying
problems.
Whether verifying an HDMI cable or a re-terminated HDBaseT cable run, checking
an HDBaseT extender, testing the EDID handling of an HDMI switch, checking
HDCP content protection protocols or just verifying a video distribution network
end-to-end, this compact, affordable 280 set will save you time on site, reduce
callbacks and provide you with assurance that the video distribution network you
just installed will run problem free.
Ease of Use
The 280 is battery powered with an embedded touch screen. It provides ease of
use and fast Time-to-Insight when testing cables and distribution gear and
checking interoperability between video components and diagnosing failures.
DRAFT #3
v0830
1-800-909-7211
teledynelecroy.com
©2018 Teledyne LeCroy. All rights reserved. Specifications, prices, availability and delivery subject to change without notice.
Product or brand names are trademarks or requested trademarks of their respective holders.
Local sales offices are located throughout the world.
Visit our website to find the most convenient location.
SPECIFICATIONS
HDMI 2.0
VESA (DMT, CVT
-R, CVT), CEA
(1) Type A 280G; (1) Type A 280A
HDMI,
DVI
Colorimetry
ITU
-R BT.601-5, ITU-R BT.709-5, BT.2020 (Rx only)
Max Pixel Rate
18G bps data rate; 600 MHz pixel rate (
upscaled from 1080p)
Encoding / Sampling
RGB,
YCbCr; 4:4:4, 4:2:2, 4:2:0
Versions
1.4 & 2.2
2Channel LPCM
HDBaseT
Version
HDBaseT 1.0
Standard
Formats
VESA (DMT, CVT
-R, CVT), CEA
Connector
(1) 8P8C (RJ
-45) Tx; (1) RJ-45 Rx
Video
Colorimetry
ITU
-R BT.601-5, ITU-R BT.709-5
Video
Max Pixel Rate
300 MHz;
NEW! Supports Long Reach mode
Video
Encoding / Sampling
RGB,
YCbCr; 4:4:4, 4:2:2, 4:2:0
HDCP
Version
s 1.4 & 2.2
Audio Formats
2Channel LPCM
Instrument (each unit)
AC Adapter/Charger
100
-120 VAC, 47-63Hz
Battery
Minimum 4 hours continuous use on 8 hour charge
Micro SD Card Slot
For saving
and retrieving test reports, EDIDs and software upgrade files
LCD
Display
480 (H); x 272 (V) resolution; 4.3” diagonal
Weight (each unit)
0.95 LBS (0.358 Kg)
Size (each
unit)
Height: 7.1 in. (18.04 cm) Width: 7.4 in. (18.79
cm) Depth: 1.25 in. (3.18 cm)
Environmental
Operating Temp: 32 to 104 (F);
0 to 40 (C)
Benefits
Shortens time on job site.
Reduces callbacks and truck rolls.
Simplifies testing process.
Verifies network components and
design
Tests Supported
280G
Transmitter
- Video Format Test
Select from common standard
CEA and VESA formats
- Video Pattern Test
Select from several test patterns; patterns
above 1080p are up-scaled to 4K
- Hot plug detect
Check
hot plug voltage from connected sink (e.g. UHD TV)
- HDCP active
Verify
HDCP; select version 1.4 or 2.2
- EDID Test
View summary of EDID contents of connected sink or entire downstream network
- HDR Test
Verify
that HDR metatdata is transmitted through the network
- Audio Test
Generate LPCM audio
test tone to check continuity end-to-end
- CalMan
NEW!
Color calibration S/W for brightness, contrast, RGB balance and gamma
280A Receiver
- Video Format Test
Verify
incoming video timing from a UHD source
- Video Test
View
incoming video on embedded screen; view pixel values up to 150MHz pixel rate
- +5V
Check
+5V from a UHD source
- HDCP Active
Verify
HDCP operation; version 1.4 or 2.2
- EDID Test
Emulate EDIDs to test response
of source or entire upstream network
- HDR Test
NEW!
Verify that HDR metatdata is transmitted through the network
- Link / Cable Test
Test HDMI or HDBaseT cable runs
- Audio Test
Verify LPCM audio end
-to-end
The Teledyne LeCroy quantumdata 280 Test Set is a combination test
instrument set comprised of an HDMI/HDBaseT Video Generator (Tx) and
Analyzer (Rx). Each device is small compact and battery powered. The 280
Test Set is ideally suited for professional A/V integrators and home theatre
installers. This feature-rich test set enables you to conduct basic
verification and diagnostic tests on HDMI/HDBaseT cables, video
distribution networks and individual A/V components. The HDMI input and
output ports support testing up to 18 Gbps data rate and 600 MHz pixel
rate and the HDBaseT input and output ports support testing up to 300
MHz pixel rate (Long Reach mode supported up to 1080p).
The instrument set’s features and convenient operation can shorten time
on the job site and reduce callbacks by enabling you to run basic
verification and diagnostic tests on complex video distribution installations
quickly and efficiently.
This convenient test Instrument set can pay for itself by eliminating
truck rolls and shortening time on the job site.
280G Video Generator 280A Video Analyzer
quantumdata™
280 Test Set
280G Video Generator
280A Video Analyzer
Portable, Feature Rich &Affordable!
Now verify HDR metadata end to end!