MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918
www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM
4N22U
4N23U 6 PIN LCC OPTOCOUPLERS
4N24U
05/29/03
Features:
• MIL-PRF-19500/486 Qualified
• Base lead provided for conventional transistor
biasing
• High gain, high voltage transistor
• Miniature package saves circuit board area
• High voltage electrical isolation…1KV rating
Applications:
• Line Receivers
• Switchmode Power Supplies
• Signal ground isolation
• Process Control input/output isolation
• Motor control
DESCRIPTION
High gain optocoupler utilizing GaAIAs infrared LED optically coupled to an N-P-N silicon phototransistor in a 6-pin leadless
chip carrier. The 4N22U, 4N23U and 4N24U optocouplers can be supplied to customer specifications as well as JAN, JANS,
JANTX, and JANTXV quality levels.
*ABSOLUTE MAXIMUM RATINGS
Input to Output Voltage.................................................................................................................................................... ±1000V
Collector-Base Voltage...........................................................................................................................................................35V
Collector-Emitter Voltage........................................................................................................................................................35V
Emitter-Collector Voltage..........................................................................................................................................................4V
Input Diode Reverse Voltage....................................................................................................................................................2V
Input Diode Continuous Forward Current at (or below) 65°C Free-Air Temperature (see note 1) ....................................40mA
Continuous Collector Current ..............................................................................................................................................50mA
Peak Diode Current ..................................................................................................................................................................1A
Continuous Transistor Power Dissipation at (or below) 25°C Free-Air Temperature (see Note 2) ................................300mW
Operating Free-Air Temperature Range.............................................................................................................-55°C to +125°C
Storage Temperature..........................................................................................................................................-65°C to +125°C
Solder Temperature (10 seconds)......................................................................................................................................240°C
Notes:
1. Derate linearly to 125°C free-air temperature at the rate of 0.67 mA/°C above 65°C.
2. Derate linearly to 125°C free-air temperature at the rate of 3 mW/°C above 65°C.
* JEDEC registered data
Package Dimensions Schematic Diagram
PIN 1
IDENTIFIER
2
1
65
4
3
ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]
6K
A
1
4
B
E5
C3
0.080 [2.03]
0.066 [1.68]
0.028 [0.71]
0.022 [0.56] 0.105 [2.67]
0.095 [2.41]
0.070 [1.78]
0.060 [1.52]
0.045 [1.14]
0.055 [1.40]
0.098 [2.49]
0.082 [2.08]
5 PLS
0.175 [4.45]
0.165 [4.19]
0.250 [6.35]
0.240 [6.10]
MICROPAC
OPTOELECTRONIC PRODUCTS
DIVISION
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918
www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM
4N22U, 4N23U, and 4N24U
6 PIN LCC OPTOCOUPLERS
05/29/03
ELECTRICAL CHARACTERISTICS INPUT LED
TA = 25°C Unless otherwise specified
PARAMETER SYMBOL MIN MAX UNITS TEST CONDITIONS NOTE
Input Diode Static Reverse Current IR 100 µA VR = 2V
Input Diode Static Forward Voltage -55°C
+25°C
+100°C
VF
1.0
0.8
0.7
1.5
1.3
1.2
V
IF = 10mA
OUTPUT TRANSISTOR
TA = 25°C Unless otherwise specified
PARAMETER SYMBOL MIN MAX UNITS TEST CONDITIONS NOTE
Collector-Base Breakdown Voltage V(BR)CBO 35 V IC = 100µA, IB = 0, IF = 0
Collector-Emitter Breakdown Voltage V(BR)CEO 35 V IC = 1mA, IB = 0, IF = 0
Emitter-Base Breakdown Voltage V(BR)EBO 4 V IC= 0, IE = 100µA, IF = 0
COUPLED CHARACTERISTICS
TA = 25°C Unless otherwise specified
PARAMETER SYMBOL MIN MAX UNITS TEST CONDITIONS NOTE
On State Collector Current 4N22U
4N23U
4N24U
IC(ON)
0.15
0.2
0.4
mA VCE = 5V, IB = 0, IF = 2mA
On State Collector Current 4N22U
4N23U
4N24U
IC(ON) 2.5
6.0
10.0
mA
VCE = 5V, IB = 0, IF = 10mA
On State Collector Current 4N22U
-55°C 4N23U
4N24U
IC(ON)
1.0
2.5
4.0
mA
VCE = 5V, IB = 0, IF = 10mA
On State Collector Current 4N22U
+100°C 4N23U
4N24U
IC(ON)
1.0
2.5
4.0
mA
VCE = 5V, IB = 0, IF = 10mA
Off State Collector Current +25°C IC(OFF) 100 nA VCE = 20V, IB = 0, IF = 0mA
Off State Collector Current +100°C IC(OFF) 100 µA VCE = 20V, IB = 0, IF = 0mA
Collector-Emitter Saturation Voltage 4N22U
4N23U
4N24U
VCE(SAT)
VCE(SAT)
VCE(SAT)
0.3
0.3
0.3
V
V
V
IC = 2.5mA, IB = 0, IF = 20mA
IC = 5mA, IB = 0, IF = 20mA
IC = 10mA, IB = 0, IF = 20mA
Input to Output Resistance ALL RI-O 1011 Ω VIN-OUT = 1kV 1
Input to Output Capacitance ALL CI-O 5 pF f = 1MHz, VIN-OUT = 1kV 1
Rise Time 4N22U
4N23U
4N24U
tr
tr
tr
15
15
20
µs
µs
µs
VCC = 10V, IF = 10mA, RL = 100Ω
Fall Time 4N22U
4N23U
4N24U
tf
tf
tf
15
15
20
µs
µs
µs
VCC = 10V, IF = 10mA, RL = 100Ω
NOTE: 1. These parameters are measured between all phototransistor leads shorted together and with both input diode leads shorted together.
SELECTION GUIDE
PART NUMBER PART DESCRIPTION
4N22U Commercial
4N23U Commercial
4N24U Commercial
JAN4N22U JAN Screened
JAN4N23U JAN Screened
JAN4N24U JAN Screened
JANTX4N22U JANTX Screened
JANTX4N23U JANTX Screened
JANTX4N24U JANTX Screened
JANTXV4N22U JANTXV Screened
JANTXV4N23 JANTXV Screened
JANTXV4N24U JANTXV Screened
JANS4N22U JANS Screened
JANS4N23U JANS Screened
JANS4N24U JANS Screened
