©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC CHIP CAPACITORS
Ceramic Surface Mount
C0805 C103 K 5 R A C*
CERAMIC
SIZE CODE
SPECIFICATION
C - Standard
CAPACITANCE CODE
Expressed in Picofarads (pF)
First two digits represent significant figures.
Third digit specifies number of zeros. (Use 9
for 1.0 through 9.9pF. Use 8 for 0.5 through 0.99pF)
(Example: 2.2pF = 229 or 0.50 pF = 508)
CAPACITANCE TOLERANCE
B – ±0.10pF J – ±5%
C – ±0.25pF K – ±10%
D – ±0.5pF M – ±20%
F – ±1% P – (GMV) – special order only
G – ±2% Z – +80%, -20%
DIMENSIONS—MILLIMETERS AND (INCHES)
CAPACITOR ORDERING INFORMATION
• C0G (NP0), X7R, X5R, Z5U and Y5V Dielectrics
• 10, 16, 25, 50, 100 and 200 Volts
• Standard End Metalization: Tin-plate over nickel
barrier
• Available Capacitance Tolerances: ±0.10 pF; ±0.25
pF; ±0.5 pF; ±1%; ±2%; ±5%; ±10%; ±20%; and
+80%-20%
• Tape and reel packaging per EIA481-1. (See page
92 for specific tape and reel information.) Bulk
Cassette packaging (0402, 0603, 0805 only) per
IEC60286-6 and EIAJ 7201.
• RoHS Compliant
FEATURES
CAPACITOR OUTLINE DRAWINGS
END METALLIZATION
C-Standard (Tin-plated nickel barrier)
FAILURE RATE LEVEL
A- Not Applicable
TEMPERATURE CHARACTERISTIC
Designated by Capacitance
Change Over Temperature Range
G – C0G (NP0) (±30 PPM/°C)
R – X7R (±15%) (-55°C + 125°C)
P– X5R (±15%) (-55°C + 85°C)
U – Z5U (+22%, -56%) (+10°C + 85°C)
V – Y5V (+22%, -82%) (-30°C + 85°C)
VOLTAGE
1 - 100V 3 - 25V
2 - 200V 4 - 16V
5 - 50V 8 - 10V
WL
TB
S
TIN PLATE
NICKEL PLATE
CONDUCTIVE
METALLIZATION
ELECTRODES
* Part Number Example: C0805C103K5RAC (14 digits - no spaces)
(Standard Chips - For
Military see page 87)
9 - 6.3V
7 - 4V
* Note: Indicates EIA Preferred Case Sizes (Tightened tolerances apply for 0402, 0603, and 0805 packaged in bulk bassette, see page 96.)
+ For extended value 1210 case size - solder reflow only.
72
1 - 100V 3 - 25V
2 - 200V 4 - 16V
5 - 50V 8 - 10V
6 - 35V 9 - 6.3V
7 - 4V
EIA SIZE
CODE METRIC
SIZE CODE L - LENGTH W - WIDTH T
THICKNESS B - BANDWIDTH S
SEPARATION
minimum
MOUNTING
TECHNIQUE
0201* 0603 0.6 (.024) ± .03 (.001) 0.3 ± (.012) ± .03 (.001) 0.15 (.006) ± .05 (.002) N/A
0402* 1005 1.0 (.04) ± .05 (.002) 0.5 (.02) ± .05 (.002) 0.20 (.008) -.40 (.016) 0.3 (.012)
0603 1608 1.6 (.063) ± .15 (.006) 0.8 (.032) ± .15 (.006) 0.35 (.014) ± .15 (.006) 0.7 (.028)
0805* 2012 2.0 (.079) ± .20 (.008) 1.25 (.049) ± .20 (.008) 0.50 (.02) ± .25 (.010) 0.75 (.030)
1206* 3216 3.2 (.126) ± .20 (.008) 1.6 (.063) ± .20 (.008) 0.50 (.02) ± .25 (.010) N/A
1210* 3225 3.2 (.126) ± .20 (.008) 2.5 (.098) ± .20 (.008) 0.50 (.02) ± .25 (.010) N/A
1808 4520 4.5 (.177) ± .30 (.012) 2.0 (.079) ± .20 (.008) 0.60 (.024) ± .35 (.014) N/A
1812 4532 4.5 (.177) ± .30 (.012) 3.2 (.126) ± .30 (.012) 0.60 (.024) ± .35 (.014) N/A
1825* 4564 4.5 (.177) ± .30 (.012) 6.4 (.252) ± .40 (.016) 0.60 (.024) ± .35 (.014) N/A
2220 5650 5.6 (.220) ± .40 (.016) 5.0 (.197) ± .40 (.016) 0.60 (.024) ± .35 (.014) N/A
2225 5664 5.6 (.220) ± .40 (.016) 6.3 (.248) ± .40 (.016) 0.60 (.024) ± .35 (.014) N/A
Solder Wave +
or
Solder Reflow
See page 78
for thickness
dimensions.
Solder Reflow
Solder Reflow
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
* Indicates EIA preferred chip sizes.
NOTE: For non-standard capacitance values or voltages, contact your local KEMET sales representative.
50 Volt Ceramic Chips can be used in 63 volt applications.
Improved product with higher ratings and tighter capacitance tolerance product may be substituted within the same size (length, width, and thickness) at KEMET’s option.
Reels with such substitutions will be marked with the improved KEMET part numbers.
CERAMIC CHIP/STANDARD
C0G CAPACITANCE RANGE – 0201, 0402, 0603, 0805, 1206
See page 78 for Thickness Code Reference Chart.
• Greater or equal to J (5%) tolerance available. • J Tolerance Only; ^ = D Tolerance Only ~ = J,K,M Tolerance Only
73
Ceramic Surface Mount
C0201*
25V 10V 16V 25V 50V 100V 10V 16V 25V 50V 100V 200V 10V 16V 25V 50V 100V 200V 10V 16V 25V 50V 100V 200V
0.50 508 C,D BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC
0.75 758 C,D BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC
1.0 109 C,D BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
1.1 119 C,D BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
1.2 129 C,D BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
1.3 139 C,D BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
1.5 159 C,D BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
1.6 169 C,D BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
1.8 189 C,D BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
2.0 209 C,D BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
2.2 229 C,D BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
2.4 249 C,D BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
2.7 279 C,D K,
M
BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
3.0 309 C,D K,
M
BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
3.3 339 C,D K,
M
BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
3.6 369 C,D K,
M
BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
3.9 399 C,D K,
M
BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
4.3 439 C,D K,
M
BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
4.7 479 C,D K,
M
BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
5.1 519 C,D K,
M
BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
5.6 569 C,D J,K,
M
BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
6.2 629 C,D J,K,
M
BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
6.8 689 C,D J,K,
M
BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
7.5 759 C,D J,K,
M
BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
8.2 829 C,D J,K,
M
BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
9.1 919 C,D J,K,
M
BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
10.0 100 C,D J,K,
M
A
A^ BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
11.0 110 C,D J,K,
M
BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
12.0 120 C,D J,K,
M
A
A~ BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
13.0 130 C,D J,K,
M
BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
15.0 150 C,D G,J,K,
M
A
A~ BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
16.0 160 C,D G,J,K,
M
BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
18.0 180 C,D G,J,K,
M
A
A~ BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
20.0 200 C,D G,J,K,
M
BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
22.0 220 C,D G,J,K,
M
A
A~ BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
24.0 240 C,D G,J,K,
M
BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
27.0 270 D,F,G,J,K,
M
A
A~ BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
30.0 300 D,F,G,J,K,
M
BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
33.0 330 D,F,G,J,K,
M
A
A~ BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
36.0 360 D,F,G,J,K,
M
BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
39.0 390 D,F,G,J,K,
M
A
A~ BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
43.0 430 D,F,G,J,K,
M
BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
47.0 470 D,F,G,J,K,
M
A
A~ BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
51.0 510 D,F,G,J,K,
M
BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
56.0 560 F,G,J,K,
M
A
A~ BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
62.0 620 F,G,J,K,
M
BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
68.0 680 F,G,J,K,
M
A
A~ BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
75.0 750 F,G,J,K,
M
BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
82.0 820 F,G,J,K,
M
A
A~ BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
91.0 910 F,G,J,K,
M
BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
100.0 101 F,G,J,K,
M
A
A~ BB BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
110.0 111 F,G,J,K,
M
BB BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
120.0 121 F,G,J,K,
M
BB BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
130.0 131 F,G,J,K,
M
BB BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
150.0 151 F,G,J,K,
M
BB BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
160.0 161 F,G,J,K,
M
BB BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
180.0 181 F,G,J,K,
M
BB BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
200.0 201 F,G,J,K,
M
BB BB BB BB BB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
220.0 221 F,G,J,K,
M
BB BB BB BB BB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
240.0 241 F,G,J,K,
M
BB BB BB BB BB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
270.0 271 F,G,J,K,
M
BB BB BB BB BB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
300.0 301 F,G,J,K,
M
BB BB BB BB BB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
330.0 331 F,G,J,K,
M
BB BB BB BB BB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
360.0 361 F,G,J,K,
M
BB BB BB BB BB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
390.0 391 F,G,J,K,
M
BB BB BB BB BB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
430.0 431 F,G,J,K,
M
BB BB BB BB BB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
470.0 471 F,G,J,K,
M
BB BB BB BB BB CB CB CB CB CB DC DC DC DC DC DD EB EB EB EB EB EB
510.0 511 F,G,J,K,
M
BB BB BB BB BB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
560.0 561 F,G,J,K,
M
BB BB BB BB BB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB
620.0 621 F,G,J,K,
M
BB BB BB BB BB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EC
680.0 681 F,G,J,K,
M
BB BB BB BB BB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EC
750.0 751 F,G,J,K,
M
BB BB BB BB BB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EC
820.0 821 F,G,J,K,
M
BB BB BB BB BB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EC
910.0 911 F,G,J,K,
M
BB BB BB BB BB CB CB CB CB CB DC DC DC DC DD DD EB EB EB EB EB ED
1000.0 102 F,G,J,K,
M
BB BB BB BB BB CB CB CB CB CB DC DC DC DC DD DD EB EB EB EB EB EE
1100.0 112 F,G,J,K,
M
BB BB BB BB CB CB CB CB CB DC DC DC DC DC EB EB EB EB EB EB
1200.0 122 F,G,J,K,
M
BB BB BB BB CB CB CB CB CB DC DC DC DC DC EB EB EB EB EB EB
1300.0 132 F,G,J,K,
M
BB BB BB BB CB CB CB CB CB DD DD DD DD DD EB EB EB EB EC EC
1500.0 152 F,G,J,K,
M
BB BB BB BB CB CB CB CB CB DD DD DD DD DD EB EB EB EB ED EC
1600.0 162 F,G,J,K,
M
BB BB BB CB CB CB CB CB DD DD DD DD DD EB EB EB EB ED ED
1800.0 182 F,G,J,K,
M
BB BB BB CB CB CB CB CB DD DD DD DD DD EB EB EB EB ED ED
2000.0 202 F,G,J,K,
M
BB BB BB CB CB CB CB CB DC DC DC DC DC EB EB EB EB ED ED
2200.0 222 F,G,J,K,
M
BB BB BB CB CB CB CB CB DC DC DC DC DC EB EB EB EB EE EE
2400.0 242 F,G,J,K,
M
CB CB CB CB CB DC DC DC DC DC EB EB EB EB EC EC
2700.0 272 F,G,J,K,
M
CB CB CB CB CB DC DC DC DC DC EB EB EB EB EC EC
3000.0 302 F,G,J,K,
M
CB CB CB CB CB DD DD DD DD DC EC EC EC EC EC
3300.0 332 F,G,J,K,
M
CB CB CB CB CB DD DD DD DD DC EC EC EC EC EE
3600.0 362 F,G,J,K,
M
CB CB CB CB CB DD DD DD DD DC EC EC EC EC EE
3900.0 392 F,G,J,K,
M
CB CB CB CB CB DE DE DE DE DC EC EC EC EC EF
4300.0 432 F,G,J,K,
M
CB CB CB CB CB DE DE DE DE DC EC EC EC EC EC
4700.0 472 F,G,J,K,
M
CB CB CB CB CB DE DE DE DE DC EC EC EC EC EC
5100.0 512 F,G,J,K,
M
CB CB CB CB DE DE DE DE DC ED ED ED ED ED
5600.0 562 F,G,J,K,
M
CB CB CB CB DC DC DC DC DC ED ED ED ED ED
6200.0 622 F,G,J,K,
M
CB CB CB CB DC DC DC DC DC EB EB EB EB EB
6800.0 682 F,G,J,K,
M
CB CB CB CB DC DC DC DC DC EB EB EB EB EB
7500.0 752 F,G,J,K,
M
CB CB CB DC DC DC DC DC EB EB EB EB EB
8200.0 822 F,G,J,K,
M
CB CB CB DC DC DC DC DC EC EC EC EC EB
9100.0 912 F,G,J,K,
M
CB CB CB DC DC DC DC DC EC EC EC EC EB
1
0,000.0 103 F,G,J,K,
M
CB CB CB DC DC DC DC DC ED ED ED ED EB
1
2,000.0 123 F,G,J,K,
M
CB CB CB DC DC DC DC DE EB EB EB EB EB
1
5,000.0 153 F,G,J,K,
M
CB CB CB DC DC DC DC DG EB EB EB EB EB
1
8,000.0 183 F,G,J,K,
M
DC DC DC DD EB EB EB EB EB
2
2,000.0 223 F,G,J,K,
M
DD DD DD DF EB EB EB EB EC
2
7,000.0 273 F,G,J,K,
M
DF DF DF EB EB EB EB EE
3
3,000.0 333 F,G,J,K,
M
DG DG DG EB EB EB EB EE
4
7,000.0 473 F,G,J,K,
M
DG DG DG EC EC EC EE EH
5
6,000.0 563 F,G,J,K,
M
ED ED ED EF
6
8,000.0 683 F,G,J,K,
M
EF EF EF EH
8
2,000.0 823 F,G,J,K,
M
EH EH EH EH
0
0,000.0 104 F,G,J,K,
M
EH EH EH
C0603* C1206*C0805*
Cap
pF Cap
Code Cap
Tolerance C0402*
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC CHIP/STANDARD
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FF
FB
FB
FC
FF
FG
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FC
FC
FF
FF
FF
FF
FG
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FE
FE
FG
FC
FF
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
10,000
12,000
15,000
18,000
22,000
27,000
33,000
CAP.
PF
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
391
471
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
CAP
CODE
CAP.
TOL.
C
C
C
C
C
,D
,D
,D
,D
,D
D
D
D
D
,F
,F
,F
,F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
G
G
G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
,G
J
J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,J
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
,K
C0G CAPACITANCE RANGE – 1210, 1812, 1825, 2220, 2225
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
,M
X7R CAPACITANCE RANGE – 0402, 0603, 0805, 1206
*Capacitance K or M. ontact KEMET Sales Rep for J tolerance availability. +_ Reflow Only.
NOTE: For non-standard capacitance values or voltages, contact your local KEMET sales representative.
# X7R dielectric - Extended Range Values - Cap and DF measured @ 0.5 Vrms.
See page 63 for Thickness Code Reference Chart.
Improved product with higher ratings and tighter capacitance tolerance product may be substituted within the same size (length, width, and thickness) at KEMET's option.
Reels with such substitutions will be marked with the improved KEMET part numbers.
See page 78 for Thickness Code Reference Chart.
74
10V 16V 25V 50V 100V 200V 50V 100V 200V 50V 100V 200V 50V 100V 200V 50V 100V 200V
0.5-2.4 508-24
9
D . FB FB FB FB FB FB
2.7-9.1 279-91
9
D K
,
MFBFBFBFB FB FB
10.0-13.0 100-13
0
D J
,
K
,
MFBFBFBFB FB FB
15.0-24.0 150-24
0
D G
,
J
,
K
,
MFBFBFBFB FB FB
27.0-51.0 270-51
0
D
,
F
,
G
,
J
,
K
,
MFBFBFBFB FB FB
56.0-82.0 560-82
0
F
,
G
,
J
,
K
,
MFBFBFBFB FB FB
91.0-360.0 910-361 F
,
G
,
J
,
K
,
MFBFBFBFB FB FB
390.0 391 F
,
G
,
J
,
K
,
MFBFBFBFB FB FB
430.0 431 F
,
G
,
J
,
K
,
MFBFBFBFB FB FB
470.0 471 F
,
G
,
J
,
K
,
MFBFBFBFB FB FBGBGBGB
510.0 511 F
,
G
,
J
,
K
,
MFBFBFBFB FB FB
560.0 561 F
,
G
,
J
,
K
,
MFBFBFBFB FB FBGBGBGB
620.0 621 F
,
G
,
J
,
K
,
MFBFBFBFB FB FB
680.0 681 F
,
G
,
J
,
K
,
MFBFBFBFB FB FBGBGBGB
750.0 751 F
,
G
,
J
,
K
,
MFBFBFBFB FB FB
820.0 821 F
,
G
,
J
,
K
,
MFBFBFBFB FB FBGBGBGB
910.0 911 F
,
G
,
J
,
K
,
MFBFBFBFB FB FB
1
,
000.0 102 F
,
G
,
J
,
K
,
MFBFBFBFB FB FBGBGBGB
1
,
100.0 112 F
,
G
,
J
,
K
,
MFBFBFBFB FB FB
1
,
200.0 122 F
,
G
,
J
,
K
,
MFBFBFBFB FB FBGBGBGB
1
,
300.0 132 F
,
G
,
J
,
K
,
MFBFBFBFB FB FC
1
,
500.0 152 F
,
G
,
J
,
K
,
MFBFBFBFB FB FEGBGBGB
1
,
600.0 162 F
,
G
,
J
,
K
,
MFBFBFBFB FB FE
1
,
800.0 182 F
,
G
,
J
,
K
,
MFBFBFBFB FB FEGBGBGB
2
,
000.0 202 F
,
G
,
J
,
K
,
MFBFBFBFB FC FE
2
,
200.0 222 F
,
G
,
J
,
K
,
MFBFBFBFB FC FGGBGBGB
2
,
400.0 242 F
,
G
,
J
,
K
,
MFBFBFBFB FC FC
2
,
700.0 272 F
,
G
,
J
,
K
,
MFBFBFBFB FC FCGBGBGB
3
,
000.0 302 F
,
G
,
J
,
K
,
MFBFBFBFB FC FF
3
,
300.0 332 F
,
G
,
J
,
K
,
MFBFBFBFB FF FFGBGBGB
3
,
600.0 362 F
,
G
,
J
,
K
,
MFBFBFBFB FF FF
3
,
900.0 392 F
,
G
,
J
,
K
,
MFBFBFBFB FF FFGBGBGBHBHB HB
4
,
300.0 432 F
,
G
,
J
,
K
,
MFBFBFBFB FF FF
4
,
700.0 472 F
,
G
,
J
,
K
,
MFFFFFFFFFG FGGBGBGDHBHB HB KBKB KB
5
,
100.0 512 F
,
G
,
J
,
K
,
MFBFBFBFB FG FG
5
,
600.0 562 F
,
G
,
J
,
K
,
MFBFBFBFB FG FGGB GBGHHBHB HB KB KB KB
6
,
200.0 622 F
,
G
,
J
,
K
,
MFBFBFBFB FG
6
,
800.0 682 F
,
G
,
J
,
K
,
MFBFBFBFB FG GBGB GJ HBHB HB JB JB KB KB KB
7
,
500.0 752 F
,
G
,
J
,
K
,
MFCFCFCFC FC
8
,
200.0 822 F
,
G
,
J
,
K
,
MFCFCFCFC FC GBGH HB HB HB JB JB KB KB KB
9
,
100.0 912 F
,
G
,
J
,
K
,
MFEFEFEFE FE
10
,
000.0 103 F
,
G
,
J
,
K
,
MFFFFFFFF FF GBGH HBHB HE JB JB KBKB KB
12
,
000.0 123 F
,
G
,
J
,
K
,
MFGFGFGFG FB GB GG HB HB HE JB JB KB KB KB
15
,
000.0 153 F
,
G
,
J
,
K
,
MFGFGFGFG FB GB GB HB HB JB JB KB KB KE
18
,
000.0 183 F
,
G
,
J
,
K
,
MFBFBFBFB FB GBGB HBHE JB JB KB KB
22
,
000.0 223 F
,
G
,
J
,
K
,
MFBFBFBFB FB GBGB HBHE JB JB KB KB
27
,
000.0 273 F
,
G
,
J
,
K
,
MFBFBFBFB FB GBGB HBHF JB JB KB KE
33
,
000.0 333 F
,
G
,
J
,
K
,
MFBFBFBFB FB GBGB JB JB KB
47
,
000.0 473 F
,
G
,
J
,
K
,
MFBFBFBFB FE GBGB JB JB
56
,
000.0 563 F
,
G
,
J
,
K
,
MFBFBFBFB FF GBGB JB JB
68
,
000.0 683 F
,
G
,
J
,
K
,
MFBFBFBFC FG GBGB JB JB
82
,
000.0 823 F
,
G
,
J
,
K
,
MFC FC FC FF FH GB GB JB JB
100
,
000.0 104 F
,
G
,
J
,
K
,
M FE FE FE FG FM+ GB GD JB JB
120
,
000.0 124 F
,
G
,
J
,
K
,
MFGFGFGFH GB GH JB JB
150
,
000.0 154 F
,
G
,
J
,
K
,
M FH FH FH FM+ GD GN JB JB
220
,
000.0 224 F
,
G
,
J
,
K
,
M FK+ FK+ FK+ GK JB JD
270
,
000.0 274 F
,
G
,
J
,
K
,
M JB JF
330
,
000.0 334 F
,
G
,
J
,
K
,
M JD JH
470
,
000.0 474 F
,
G
,
J
,
K
,
M JG
560
,
000.0 564 F
,
G
,
J
,
K
,
M
Cap
pF Cap
Code Cap
Tolerance C1210* C1812* C1825* C2220 C2225
6.3V 10V 16V 25V 50V 6.3V 10V 16V 25V 50V 100V 200V 6.3V 10V 16V 25V 50V 100V 200V 6.3V 10V 16V 25V 50V 100V 200V
150 151 J, K, M BB BB BB BB BB
180 181 J, K, M BB BB BB BB BB CB CB CB CB CB CB CB DC DC DC DC DC DC DC
220 221 J, K, M BB BB BB BB BB CB CB CB CB CB CB CB DC DC DC DC DC DC DC
270 271 J, K, M BB BB BB BB BB CB CB CB CB CB CB CB DC DC DC DC DC DC DC
330 331 J, K, M BB BB BB BB BB CB CB CB CB CB CB CB DC DC DC DC DC DC DC
390 391 J, K, M BB BB BB BB BB CB CB CB CB CB CB CB DC DC DC DC DC DC DC
470 471 J, K, M BB BB BB BB BB CB CB CB CB CB CB CB DC DC DC DC DC DC DC
560 561 J, K, M BB BB BB BB BB CB CB CB CB CB CB CB DC DC DC DC DC DC DC
680 681 J, K, M BB BB BB BB BB CB CB CB CB CB CB CB DC DC DC DC DC DC DC
820 821 J, K, M BB BB BB BB BB CB CB CB CB CB CB CB DC DC DC DC DC DC DC
1,00
0
102 J, K, M BBBBBBBBBBCBCBCBCBCBCBCBDCDCDCDCDCDCDCEBEBEBEBEBEBEB
1,20
0
122 J, K, M BBBBBBBBBBCBCBCBCBCBCBCBDCDCDCDCDCDCDCEBEBEBEBEBEBEB
1,50
0
152 J, K, M BBBBBBBBBBCBCBCBCBCBCBCBDCDCDCDCDCDCDCEBEBEBEBEBEBEB
1,80
0
182 J, K, M BBBBBBBBBBCBCBCBCBCBCBCBDCDCDCDCDCDCDCEBEBEBEBEBEBEB
2,20
0
222 J, K, M BBBBBBBBBBCBCBCBCBCBCBCBDCDCDCDCDCDCDCEBEBEBEBEBEBEB
2,70
0
272 J, K, M BBBBBBBBBBCBCBCBCBCBCBCBDCDCDCDCDCDCDCEBEBEBEBEBEBEB
3,30
0
332 J, K, M BBBBBBBBBBCBCBCBCBCBCBCBDCDCDCDCDCDCDCEBEBEBEBEBEBEB
3,90
0
392 J, K, M BBBBBBBBBBCBCBCBCBCBCBCBDCDCDCDCDCDCDCEBEBEBEBEBEBEB
4,70
0
472 J, K, M BBBBBBBBBBCBCBCBCBCBCBCBDCDCDCDCDCDCDCEBEBEBEBEBEBEB
5,60
0
562 J, K, M BBBBBBBBBBCBCBCBCBCBCBCBDCDCDCDCDCDCDCEBEBEBEBEBEBEB
6,80
0
682 J, K, M BBBBBBBBBBCBCBCBCBCBCBCBDCDCDCDCDCDCDCEBEBEBEBEBEBEB
8,20
0
822 J, K, M BBBBBBBBBBCBCBCBCBCBCBCBDCDCDCDCDCDCDCEBEBEBEBEBEBEB
10,00
0
103 J, K, M BBBBBBBBBBCBCBCBCBCBCBCBDCDCDCDCDCDCDCEBEBEBEBEBEBEB
12,00
0
123 J, K, M BBBBBBBBBBCBCBCBCBCBCB DCDCDCDCDCDCDCEBEBEBEBEBEBEB
15,00
0
153 J, K, M BBBBBBBBBBCBCBCBCBCBCB DCDCDCDCDCDDDCEBEBEBEBEBEBEB
18,00
0
183 J, K, M BBBBBBBBBBCBCBCBCBCBCB DCDCDCDCDCDDDCEBEBEBEBEBEBEB
22,00
0
223 J, K, M BBBBBBBBBBCBCBCBCBCBCB DCDCDCDCDCDDDCEBEBEBEBEBEBEB
27,00
0
273 J, K, M BBBBBBBB CBCBCBCBCBCB DCDCDCDCDCDDDEEBEBEBEBEBEBEB
33,00
0
333 J, K, M BBBBBBBB CBCBCBCBCBCB DCDCDCDCDCDDDEEBEBEBEBEBEBEB
39,00
0
393 J, K, M BBBBBBBB CBCBCBCBCBCB DCDCDCDCDCDDDEEBEBEBEBEBECEB
47,00
0
473 J, K, M BBBBBBBB CBCBCBCBCBCB DCDCDCDCDCDEDGEBEBEBEBEBECED
56,00
0
563 J, K, M BBBBBB CBCBCBCBCB DDDDDDDDDDDEDGEBEBEBEBEBEBED
68,00
0
683 J, K, M BBBBBB CBCBCBCBCB DDDDDDDDDDDE EBEBEBEBEBEBED
82,00
0
823 J, K, M BBBBBB CBCBCBCBCB DDDDDDDDDDDE EBEBEBEBEBEBED
100,00
0
104 J, K, M BBBBBB CBCBCBCBCB DDDDDDDDDDDE EBEBEBEBEBEBEM
120,00
0
124 J, K, M CBCBCB CB DCDCDCDCDDDG ECECECECECECEM
150,00
0
154 J, K, M CBCBCB CD DCDCDCDCDD ECECECECECECEG
180,00
0
184 J, K, M CBCBCB DCDCDCDCDD ECECECECECEC
220,00
0
224 J, K, M CBCBCBCD DCDCDCDCDDDG ECECECECECEC
270
,
00
0
274 J
,
K
,
M CBCBCB DDDDDDDD EBEBEBEBECEM
330,00
0
334 J, K, M CB CB CB DD DD DD DD DD EB EB EB EB EC EG
390,00
0
394 J, K, M CB CB CB DG DG DG DG DE EB EB EB EB EC EG
470,00
0
474 J, K, M CBCBCB DDDDDDDDDE ECECECECECEG
560,00
0
564 J, K, M DD DD DD DG DH ED ED ED ED EC
680,00
0
684 J, K, M DD DD DD DG DH EE EE EE EE ED
820,00
0
824 J, K, M DD DD DD DG EF EF EF EF ED
1,000,00
0
105 J, K, M CC* CC* CC* DD DD DD DG EF EF EF EG ED
1,200,00
0
125 J, K, M DE DE DE ED ED ED EG EH
1,500,00
0
155 J, K, M DG DG DG EF EF EF EG EH
1,800,00
0
185 J, K, M DG DG DG EF EF EF EH
2,200,00
0
225 J, K, M DG DG DG ED ED ED EF EH
2,700,00
0
275 J, K, M EN EN EN
3,300,00
0
335 J, K, M ED ED ED EH
3,900,00
0
395 J, K, M EF EF EF
4,700,00
0
475 J, K, M EF+ EF+ EF+ EH+
5,600,00
0
565 J, K, M EH+ EH+ EH+
6,800,00
0
685 J, K, M EH+ EH+ EH+
8,200,00
0
825 J, K, M EH+ EH+ EH+
10,000,00
0
106 J, K, M EH+ EH+ EH+
C1206C0805C0402
Cap
pF Cap
Code Cap Tol C0603
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC CHIP CAPACITORS
This ch
Thickness Code Reference Chart
Packaging Quantity Based on Finished Chip Thickness Specifications
78
This chart refers to ceramic chip thickness codes on pages 73 – 76.
Note: TU suffix represents tape and reel packaging of unmarked components.
Note: TM suffix represents tape and reel packaging of marked components.
Cases sizes d1210 are 8mm tape with 4mm pitch and Case Sizes >1210 are 12mm tape and 8mm pitch.
art refers to ceramic chip thickness codes on pages 73-76.
Thickness
Code Chip
Size Chip Thickness
Range (mm) Qty per Reel
7" Plastic Qty per Reel
13" Plastic Qty per Reel
7" Paper Qty per Reel
13" Paper Qty per Bulk
Cassette
A
A 0201 0.30 ± 0.03 N/A N/A 15,000 N/A N/A
BB 0402 0.50 ± 0.05 N/A N/A 10,000 50,000 50,000
CB 0603 0.80 ± 0.07 N/A N/A 4,000 10,000 15,000
CC 0603 0.80 ± 0.10 N/A N/A 4,000 10,000 N/A
CD 0603 0.80 ± 0.15 N/A N/A 4,000 10,000 N/A
DB 0805 0.60 ± 0.10 N/A N/A 4,000 10,000 10,000
DC 0805 0.78 ± 0.10 N/A N/A 4,000 10,000 N/A
DD 0805 0.90 ± 0.10 N/A N/A 4,000 10,000 N/A
DE 0805 1.00 ± 0.10 2,500 10,000 N/A N/A N/A
DF 0805 1.10 ± 0.10 2,500 10,000 N/A N/A N/A
DG 0805 1.25 ± 0.15 2,500 10,000 N/A N/A N/A
DH 0805 1.25 ± 0.20 2,500 10,000 N/A N/A N/A
DJ 0805 1.25 ± 0.20 3,000 N/A N/A N/A N/A
DK 0805 1.25 ± 0.15 3,000 N/A N/A N/A N/A
DL 0805 0.95 ± 0.10 4,000 10,000 N/A N/A N/A
EB 1206 0.78 ± 0.10 4,000 10,000 4,000 10,000 N/A
EC 1206 0.90 ± 0.10 4,000 10,000 N/A N/A N/A
ED 1206 1.00 ± 0.10 2,500 10,000 N/A N/A N/A
EE 1206 1.10 ± 0.10 2,500 10,000 N/A N/A N/A
EF 1206 1.20 ± 0.15 2,500 10,000 N/A N/A N/A
EG 1206 1.60 ± 0.15 2,000 8,000 N/A N/A N/A
EH 1206 1.60 ± 0.20 2,000 8,000 N/A N/A N/A
EJ 1206 1.70 ± 0.20 2,000 8,000 N/A N/A N/A
EK 1206 0.80 ± 0.10 2,000 8,000 N/A N/A N/A
EL 1206 1.15 ± 0.15 2,000 8,000 N/A N/A N/A
EM 1206 1.25 ± 0.15 2,500 10,000 N/A N/A N/A
EN 1206 0.95 ± 0.10 4,000 10,000 N/A N/A N/A
FB 1210 0.78 ± 0.10 4,000 10,000 N/A N/A N/A
FC 1210 0.90 ± 0.10 4,000 10,000 N/A N/A N/A
FD 1210 0.95 ± 0.10 4,000 10,000 N/A N/A N/A
FE 1210 1.00 ± 0.10 2,500 10,000 N/A N/A N/A
FF 1210 1.10 ± 0.10 2,500 10,000 N/A N/A N/A
FG 1210 1.25 ± 0.15 2,500 10,000 N/A N/A N/A
FH 1210 1.55 ± 0.15 2,000 8,000 N/A N/A N/A
FJ 1210 1.85 ± 0.20 2,000 8,000 N/A N/A N/A
FK 1210 2.10 ± 0.20 2,000 8,000 N/A N/A N/A
FL 1210 1.40 ± 0.15 2,000 8,000 N/A N/A N/A
FM 1210 1.70 ± 0.20 2,000 8,000 N/A N/A N/A
FN 1210 1.85 ± 0.20 2,000 8,000 N/A N/A N/A
FO 1210 1.50 ± 0.20 2,000 8,000 N/A N/A N/A
FP 1210 1.60 ± 0.20 2,000 8,000 N/A N/A N/A
FQ 1210 2.50 ± 0.22 1,500 N/A N/A N/A N/A
FR 1210 2.25 ± 0.20 2,000 8,000 N/A N/A N/A
FS 1210 2.50 ± 0.20 1,000 4,000 N/A N/A N/A
FT 1210 1.90 ± 0.20 1,500 4,000 N/A N/A N/A
LD 1808 0.90 ± 0.10 4,000 10,000 N/A N/A N/A
GB 1812 1.00 ± 0.10 1,000 4,000 N/A N/A N/A
GC 1812 1.10 ± 0.10 1,000 4,000 N/A N/A N/A
GD 1812 1.25 ± 0.15 1,000 4,000 N/A N/A N/A
GE 1812 1.30 ± 0.10 1,000 4,000 N/A N/A N/A
GF 1812 1.50 ± 0.10 1,000 4,000 N/A N/A N/A
GG 1812 1.55 ± 0.10 1,000 4,000 N/A N/A N/A
GH 1812 1.40 ± 0.15 1,000 4,000 N/A N/A N/A
GJ 1812 1.70 ± 0.15 1,000 4,000 N/A N/A N/A
GK 1812 1.60 ± 0.20 1,000 4,000 N/A N/A N/A
GL 1812 1.90 ± 0.20 1,000 4,000 N/A N/A N/A
GM 1812 2.00 ± 0.20 1,000 4,000 N/A N/A N/A
GN 1812 1.70 ± 0.20 1,000 4,000 N/A N/A N/A
GO 1812 2.50 ± 0.20 500 N/A N/A N/A N/A
HB 1825 1.10 ± 0.15 1,000 4,000 N/A N/A N/A
HC 1825 1.15 ± 0.15 1,000 4,000 N/A N/A N/A
HD 1825 1.30 ± 0.15 1,000 4,000 N/A N/A N/A
HE 1825 1.40 ± 0.15 1,000 4,000 N/A N/A N/A
HF 1825 1.50 ± 0.15 1,000 4,000 N/A N/A N/A
JB 2220 1.00 ± 0.15 1,000 4,000 N/A N/A N/A
JC 2220 1.10 ± 0.15 1,000 4,000 N/A N/A N/A
JD 2220 1.30 ± 0.15 1,000 4,000 N/A N/A N/A
JE 2220 1.40 ± 0.15 1,000 4,000 N/A N/A N/A
JF 2220 1.50 ± 0.15 1,000 4,000 N/A N/A N/A
JG 2220 1.70 ± 0.15 1,000 4,000 N/A N/A N/A
JH 2220 1.80 ± 0.15 1,000 4,000 N/A N/A N/A
JO 2220 2.40 ± 0.15 500 2,000 N/A N/A N/A
KB 2225 1.00 ± 0.15 1,000 4,000 N/A N/A N/A
KC 2225 1.10 ± 0.15 1,000 4,000 N/A N/A N/A
KD 2225 1.30 ± 0.15 1,000 4,000 N/A N/A N/A
KE 2225 1.40 ± 0.15 1,000 4,000 N/A N/A N/A
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
KEMET offers Multilayer Ceramic Chip Capacitors
packaged in 8mm and 12mm plastic tape on 7" and
13" reels in accordance with EIA standard 481-1:
Taping of surface mount components for automatic
handling. This packaging system is compatible with all
tape
fed
automatic
pick
and
place
systems. See page 78
for details on reeling quantities for commercial chips
and page 87 for MIL-PRF-55681 chips.
CERAMIC CHIP CAPACITORS
Packaging Information
Tape & Reel Packaging
8mm ±.30
(.315 ±.012")
or
12mm ±.30
(.472 ±.012")
178mm (7.00")
or
330mm (13.00")
Anti-Static Reel
Embossed Carrier*
0402 and 0603 case sizes
available on punched paper only.
Embossment
Anti-Static Cover Tape
(.10mm (.004") Max Thickness)
Chip Orientation
in Pocket
(except 1825 Commercial, and 1825 & 2225 Military)
* Punched paper carrier used for 0402 and 0603 case size.
g
handling. This packaging system is compatible with all
tape
fed
automatic
pick
and
place
systems. See page 81
for details on reeling quantities for commercial chips
and page 90 for MIL-PRF-55681 chips.
KEMET
®
X
C
G
Z
Y
Grid
placement
courtyard Z
2.14
2.78
3.30
4.50
4.50
5.90
5.90
7.00
7.00
G
0.28
0.68
0.70
1.50
1.50
2.30
2.30
3.30
3.30
X
0.74
1.08
1.60
2.00
2.90
3.70
6.90
5.50
6.80
Y(ref)
0.93
1.05
1.30
1.50
1.50
1.80
1.80
1.85
1.85
C(ref)
1.21
1.73
2.00
3.00
3.00
4.10
4.10
5.15
5.15
Z
3.18
3.70
4.90
4.90
G
0.68
0.70
1.50
1.50
X
0.80
1.10
1.40
2.00
Y(ref)
1.25
1.50
1.70
1.70
Smin
1.93
2.20
3.20
3.20
Wave SolderReflow Solder
Calculation Formula
Z = Lmin + 2Jt + Tt
G = Smax - 2Jh -Th
X = Wmin + 2Js + Ts
Tt, Th, Ts = Combined tolerances
0402
0603
0805
1206
1210
1812
1825
2220
2225
Dimension
Not Recommended
Not Recommended
C
X
Grid
Placement
Courtyard
GY
Z
SURFACE MOUNT LAND DIMENSIONS - CERAMIC CHIP CAPACITORS - MM
93
Packaging
Case Sizes ≤ 1210 are 8 mm tape with 4 mm pitch.
Case Sizes >1210 are 12 mm tape with 8 mm pitch.
Note: TU suffix represents tape and reel packaging of unmarked components.
TM suffix represents tape and reel packaging of marked components.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
Performance Notes
1. Cover Tape Break Force: 1.0 Kg Minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width Peel Strength
8 mm 0.1 Newton to 1.0 Newton (10g to 100g)
12 mm 0.1 Newton to 1.3 Newton (10g to 130g)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier
tape shall be 165to 180from the plane of the carrier tape. During peeling, the carrier and/or cover tape
shall be pulled at a velocity of 300 ±10 mm/minute.
3. Reel Sizes: Molded tantalum capacitors are available on either 180 mm (7") reels (standard) or 330 mm (13")
reels (with C-7280). Note that 13” reels are preferred.
4. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes.
Refer to EIA-556.
Embossed Carrier Tape Configuration: Figure 1
NOTES
1. B1 dimension is a reference dimension for tape feeder clearance only.
2. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of
embossment location and hole location shall be applied independent of each other.
3. Tape with components shall pass around radius “R” without damage (see sketch A). The minimum trailer length (Fig. 2) may require
additional length to provide R min. for 12 mm embossed tape for reels with hub diameters approaching N min. (Table 2)
4. The cavity defined by A0,B0,and K0shall be configured to surround the part with sufficient clearance such that the chip does not pro-
trude beyond the sealing plane of the cover tape, the chip can be removed from the cavity in a vertical direction without mechanical
restriction, rotation of the chip is limited to 20 degrees maximum in all 3 planes, and lateral movement of the chip is restricted to 0.5 mm
maximum in the pocket (not applicable to vertical clearance.)
Table 1 — EMBOSSED TAPE DIMENSIONS (Metric will govern)
Constant Dimensions — Millimeters (Inches)
Tape Size D0EP
0P2T Max T1Max
8 mm 1.5 1.75 ±0.10 4.0 ±0.10 2.0 ±0.05 0.600 0.100
and +0.10 -0.0
12 mm (0.059 (0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002) (0.024) (0.004)
+0.004, -0.0)
Variable Dimensions — Millimeters (Inches)
Tape Size Pitch B1Max. D1Min. F P1R Min. T2Max W A0B0K0
Note 1 Note 2 Note 3 Note 4
8 mm Single 4.4 1.0 3.5 ±0.05 4.0 ±0.10 25.0 2.5 8.0 ±0.30
(4 mm)
(0.173) (0.039) (0.138 ±0.002) (0.157 ±0.004) (0.984) (0.098) (.315 ±0.012)
12 mm Double 8.2 1.5 5.5 ±0.05 8.0 ±0.10 30.0 4.6 12.0 ±0.30
(8 mm) (0.323) (0.059) (0.217 ±0.002) (0.315 ±0.004) (1.181) (0.181) (0.472 ±0.012)
TANTALUM, CERAMIC AND
ALUMINUM CHIP CAPACITORS
Packaging Information
94
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
Embossed Carrier Tape Configuration (cont.)
Sketch D: Tape Camber (Top View)
Allowable camber to be 1 mm/250 mm.
250mm (9.843)
1mm (0.039) Max.
1mm (0.039) Max.
Table 2 – REEL DIMENSIONS (Metric will govern)
Figure 3: Reel Dimensions (Metric Dimensions will govern)
Tape Size A Max B* Min C D* Min N Min W1W2Max W3
8 mm 330.0 1.5 13.0 ± 0.20 20.2 50.0 8.4 14.4 7.9 Min
(12.992) (0.059) (0.512 ± 0.008) (0.795) (1.969) +1.5, -0.0 (0.567) (0.311)
See (0.331 10.9 Max
Note 3 +0.059, -0.0) (0.429)
12 mm 330.0 1.5 13.0 ± 0.20 20.2 Table 1 12.4 18.4 11.9 Min
(12.992) (0.059) (0.512 ± 0.008) (0.795) +2.0, -0.0 (0.724) (0.469)
(0.488 15.4 Max
+0.078, -0.0) (0.606)
TANTALUM, CERAMIC AND
ALUMINUM CHIP CAPACITORS
Packaging Information
Figure 2:
Tape Leader
& Trailer
Dimensions
(Metric
Dimensions
Will Govern)
400mm (15.75) Min.
20°
95
Packaging
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
20°
20°
Maximum
component rotation.
Typical
component
center line
Punched Carrier (Paper Tape) Configuration (Ceramic Chips Only):
Table 1: 8 & 12mm Punched Tape
(Metric Dimensions Will Govern)
Variable Dimensions - Millimeters (Inches)
Note:
1. A0, B0 and T determined by the maximum dimensions to the ends of the terminals extending from the
body and/or the body dimensions of the component. The clearance between the ends of the terminals or
body of the component to the sides and depth of the cavity (A0, B0 and T) must be within 0.05mm (.002)
minimum and 0.50mm (.020) maximum. The clearance allowed must also prevent rotation of the component
within the cavity of not more than 20 degrees (see sketches A and B).
2. Tape with components shall pass around radius "R" without damage.
3. KEMET nominal thicknesses are: 0402 = 0.6mm and all others 0.95mm minimum.
8mm
and
12mm
1.5
+0.10, -0.0
(.059
+0.004, -0.0)
1.75 ±0.10
(.069 ±0.004)
4.0 ± 0.10
(.157 ± 0.004)
2.0 ± 0.05
(.079 ± 0.002)
0.10
(.004)
Max.
0.75
(.030)
Min.
0.75
(.030)
Min.
25 (.984)
See Note 2
Table 1
Tape
Size D0P0
EP2T1G1G2R Min.
8mm
1/2
Pitch
2.0 ± 0.10
(.079 ±.004)
See Require-
ments
Section 3.3 (d)
3.5 ± 0.05
(.138 ± .002)
8.0 ± 0.3
(.315 ± 0.012)
See Note 1
Table 1
1.1mm (.043)
Max. for Paper
Base Tape and
1.6mm (.063)
Max. for Non-
Paper Base
Compositions.
See Note 3.
Tape
Size P1W
FA0B0T
8mm 4.0 ± 0.10
(0.157 ± .004)
12mm 4.0 ± 0.10
(0.157 ± .004)
12mm
Double
Pitch
8.0 ± 0.10
(0.315 ± .004)
12.0 ± 0.3
(.472 ± .012)
5.5 ± 0.05
(.217 ± .002)
Table 1: 8 & 12mm Punched Tape
(Metric Dimensions Will Govern)
Constant Dimensions - Millimeters (Inches)
Sketch B:
Max. Component
Rotation - Front
Cross Sectional View
Sketch C:
Component Rotation - Top View
A
0
B
0
P
1
P
0
P
2
D
0
F
E
W
Center lines
of cavity
10 pitches cumulative
tolerance on tape
±0.2 (±0.008)
Top
Tape
Cover
T
User Direction of Feed
T
1
Max. Cavity Size
See Note 1
Table 1
Bottom
Tape
Cover
G
2
R
(Min.)
Sketch A:
Bending Radius
See Note 2
Table 1
CERAMIC CHIP CAPACITORS
Packaging Information
96
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC CHIP CAPACITORS
Packaging Information
CAPACITOR MARKING TABLE
(Marking Optional - Not Available
for 0402 Size or Y5V Dielectric)
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
R
S
T
U
V
W
X
Y
Z
a
b
d
e
f
m
n
t
y
0.10
0.11
0.12
0.13
0.15
0.16
0.18
0.20
0.22
0.24
0.27
0.30
0.33
0.36
0.39
0.43
0.47
0.51
0.56
0.62
0.68
0.75
0.82
0.91
0.25
0.35
0.40
0.45
0.50
0.60
0.70
0.80
0.90
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
2.5
3.5
4.0
4.5
5.0
6.0
7.0
8.0
9.0
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
25
35
40
45
50
60
70
80
90
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
250
350
400
450
500
600
700
800
900
1000
1100
1200
1300
1500
1600
1800
2000
2200
2400
2700
3000
3300
3600
3900
4300
4700
5100
5600
6200
6800
7500
8200
9100
2500
3500
4000
4500
5000
6000
7000
8000
9000
10,000
11,000
12,000
13,000
15,000
16,000
18,000
20,000
22,000
24,000
27,000
30,000
33,000
36,000
39,000
43,000
47,000
51,000
56,000
62,000
68,000
75,000
82,000
91,000
25,000
35,000
40,000
45,000
50,000
60,000
70,000
80,000
90,000
100,000
110,000
120,000
130,000
150,000
160,000
180,000
200,000
220,000
240,000
270,000
300,000
330,000
360,000
390,000
430,000
470,000
510,000
560,000
620,000
680,000
750,000
820,000
910,000
250,000
350,000
400,000
450,000
500,000
600,000
700,000
800,000
900,000
Alpha
Character
Numeral
901 2 3 4 5
Capacitance (pF) For Various Numeral Identifiers
1,000,000
1,100,000
1,200,000
1,300,000
1,500,000
1,600,000
1,800,000
2,000,000
2,200,000
2,400,000
2,700,000
3,000,000
3,300,000
3,600,000
3,900,000
4,300,000
4,700,000
5,100,000
5,600,000
6,200,000
6,800,000
7,500,000
8,200,000
9,100,000
2,500,000
3,500,000
4,000,000
4,500,000
5,000,000
6,000,000
7,000,000
8,000,000
9,000,000
7
10,000,000
11,000,000
12,000,000
13,000,000
15,000,000
16,000,000
18,000,000
20,000,000
22,000,000
24,000,000
27,000,000
30,000,000
33,000,000
36,000,000
39,000,000
43,000,000
47,000,000
51,000,000
56,000,000
62,000,000
68,000,000
75,000,000
82,000,000
91,000,000
25,000,000
35,000,000
40,000,000
45,000,000
50,000,000
60,000,000
70,000,000
80,000,000
90,000,000
6
Laser marking is available as an extra-cost option for
most KEMET ceramic chips. Such marking is two
sided, and includes a K to identify KEMET, followed by
two characters (per EIA-198 - see table below) to
identify the capacitance value. Note that marking is
not available for size 0402 nor for any Y5V chip. In
addition, the 0603 marking option is limited to the K
only.
Example shown is 1,000 pF capacitor.
KA3
Table 2 – Capacitance Values Available
In Bulk Cassette Packaging
0402
0603
0805
All
All
C0G
X7R
Y5V
All
All
109
109
109
221
221
221
221
221
104
104
All
All
181
331
102
392
103
273
104
104
224
224
Case
Size Dielectric Voltage
Min.
Cap
Value
Max.
Cap
Value
All
All
200
100
50
200
100
50
25
16
25
16
Terminations: KEMET nickel barrier layer with a tin overplate.
0.3
0.7
0.75
EIA
Size
Code
Length
L
Width
W
Thickness
T
Bandwidth
B
Minimum
Separation
S
Metric
Size
Code
Number of
Pcs/Cassette
50,000
15,000
10,000
0402
0603
0805
1.0 ± 0.05
1.6 ± 0.07
2.0 ± 0.10
0.5 ± 0.05
0.8 ± 0.07
1.25 ± 0.10
0.5 ± .05
0.8 ± .07
0.6 ± .10
0.2 to 0.4
0.2 to 0.5
0.5 to 0.75
1005
1608
2012
Table 1 – Capacitor Dimensions for Bulk
Cassette Packaging – Millimeters
Unit: mm
* Reference
110 ± 0.7
31.5 ±0
0.2
36 ±0
0.2
19.0*
5.0*
10*
53.3*
6.8 ± 0.1
8.8 ± 0.1
12.0 ± 0.1
3.0 ±0
0.2
2.0 ±0.1
0
1.5 ±0
0.1
Bulk Cassette Packaging (Ceramic Chips only)
(Meets Dimensional Requirements IEC-286-6 and EIAJ 7201)
97
Packaging
