LM135,LM135A,LM235,LM235A,LM335,LM335A LM135/LM235/LM335, LM135A/LM235A/LM335A Precision Temperature Sensors Literature Number: SNIS160C LM135/LM235/LM335, LM135A/LM235A/LM335A Precision Temperature Sensors General Description The LM135 series are precision, easily-calibrated, integrated circuit temperature sensors. Operating as a 2-terminal zener, the LM135 has a breakdown voltage directly proportional to absolute temperature at +10 mV/K. With less than 1 dynamic impedance the device operates over a current range of 400 A to 5 mA with virtually no change in performance. When calibrated at 25C the LM135 has typically less than 1 C error over a 100C temperature range. Unlike other sensors the LM135 has a linear output. Applications for the LM135 include almost any type of temperature sensing over a -55C to 150C temperature range. The low impedance and linear output make interfacing to readout or control circuitry especially easy. The LM135 operates over a -55C to 150C temperature range while the LM235 operates over a -40C to 125C tem- perature range. The LM335 operates from -40C to 100C. The LM135/LM235/LM335 are available packaged in hermetic TO-46 transistor packages while the LM335 is also available in plastic TO-92 packages. Features Directly calibrated in Kelvin 1C initial accuracy available Operates from 400 A to 5 mA Less than 1 dynamic impedance Easily calibrated Wide operating temperature range 200C overrange Low cost Schematic Diagram 569801 (c) 2008 National Semiconductor Corporation 5698 www.national.com LM135/LM235/LM335, LM135A/LM235A/LM335A Precision Temperature Sensors December 17, 2008 LM135/LM235/LM335, LM135A/LM235A/LM335A Specified Operating Temp. Range Continuous Absolute Maximum Ratings (Note 4) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Reverse Current Forward Current Storage Temperature 8-Pin SOIC Package TO-92 Package TO-46 Package LM135, LM135A -55C to 150C LM235, LM235A -40C to 125C LM335, LM335A -40C to 100C Lead Temp. (Soldering, 10 seconds) 8-Pin SOIC Package: Vapor Phase (60 seconds): Infrared (15 seconds): TO-92 Package: TO-46 Package: 15 mA 10 mA -65C to 150C -60C to 150C -60C to 180C Temperature Accuracy Intermittent (Note 2) 150C to 200C 125C to 150C 100C to 125C 300C 215C 220C 260C 300C (Note 1) LM135/LM235, LM135A/LM235A Parameter LM135A/LM235A Conditions LM135/LM235 Units Min Typ Max Min Typ Max 2.97 2.98 2.99 2.95 2.98 3.01 V TC = 25C, IR = 1 mA 0.5 1 1 3 C Uncalibrated Temperature Error TMIN TC TMAX, IR = 1 mA 1.3 2.7 2 5 C Temperature Error with 25C TMIN TC TMAX, IR = 1 mA 0.3 1 0.5 1.5 C Operating Output Voltage TC = 25C, IR = 1 mA Uncalibrated Temperature Error Calibration Calibrated Error at Extended TC = TMAX (Intermittent) 2 2 C Temperatures Non-Linearity IR = 1 mA Temperature Accuracy 0.3 0.5 0.3 1 C (Note 1) LM335, LM335A Parameter LM335A Conditions LM335 Units Min Typ Max Min Typ Max 2.95 2.98 3.01 2.92 2.98 3.04 V Operating Output Voltage TC = 25C, IR = 1 mA Uncalibrated Temperature Error TC = 25C, IR = 1 mA 1 3 2 6 C Uncalibrated Temperature Error TMIN TC TMAX, IR = 1 mA 2 5 4 9 C Temperature Error with 25C TMIN TC TMAX, IR = 1 mA 0.5 1 1 2 C Calibration Calibrated Error at Extended TC = TMAX (Intermittent) 2 2 C Temperatures Non-Linearity IR = 1 mA Electrical Characteristics Parameter 0.3 1.5 0.3 1.5 C (Note 1) LM135/LM235 LM135A/LM235A Conditions Min Operating Output Voltage 400 A IR 5 mA Change with Current At Constant Temperature Dynamic Impedance IR = 1 mA Output Voltage Temperature Coefficient Typ Max 2.5 10 LM335 LM335A Min Units Typ Max 3 14 mV 0.5 0.6 +10 +10 mV/C Time Constant Still Air 100 ft/Min Air Stirred Oil 80 10 1 80 10 1 sec sec sec Time Stability TC = 125C 0.2 0.2 C/khr www.national.com 2 Note 2: Continuous operation at these temperatures for 10,000 hours for H package and 5,000 hours for Z package may decrease life expectancy of the device. Thermal Resistance 8-Pin SOIC TO-92 JA (Junction to Ambient) 165C/W 202C/W 400C/W TO-46 JC (Junction to Case) N/A 170C/W N/A Note 4: Refer to RETS135H for military specifications. Connection Diagrams 8-Pin SOIC Surface Mount Package TO-92 Plastic Package TO-46 Metal Can Package* 569808 Bottom View 569825 569826 *Case is connected to negative pin Top View Bottom View Ordering Information Package Part Number LM335AM 8-Pin SOIC LM335AMX LM335M LM335MX TO-92 TO-46 Package Marking Transport Media NSC Drawing 95 Units/Rail LM335AM 2.5k Units Tape and Reel 95 Units/Rail LM335M M08A 2.5k Units Tape and Reel LM335AZ LM335AZ 1800 Bag LM335Z LM335Z 1800 Bag LM135AH LM135AH 1000 Bag LM135H LM135H 1000 Bag LM235AH LM235AH 1000 Bag LM235H LM235H 1000 Bag LM335AH LM335AH 1000 Bag LM335H LM335H 1000 Bag 3 Z03Z H03H www.national.com LM135/LM235/LM335, LM135A/LM235A/LM335A Note 1: Accuracy measurements are made in a well-stirred oil bath. For other conditions, self heating must be considered. LM135/LM235/LM335, LM135A/LM235A/LM335A Typical Performance Characteristics Reverse Voltage Change Calibrated Error 569827 569828 Reverse Characteristics Response Time 569829 569830 Dynamic Impedance Noise Voltage 569831 www.national.com 569832 4 Thermal Time Constant 569834 569833 Thermal Response in Still Air Thermal Response in Stirred Oil Bath 569836 569835 Forward Characteristics 569837 5 www.national.com LM135/LM235/LM335, LM135A/LM235A/LM335A Thermal Resistance Junction to Air LM135/LM235/LM335, LM135A/LM235A/LM335A Calibrated Sensor Application Information CALIBRATING THE LM135 Included on the LM135 chip is an easy method of calibrating the device for higher accuracies. A pot connected across the LM135 with the arm tied to the adjustment terminal allows a 1-point calibration of the sensor that corrects for inaccuracy over the full temperature range. This single point calibration works because the output of the LM135 is proportional to absolute temperature with the extrapolated output of sensor going to 0V output at 0K (-273.15C). Errors in output voltage versus temperature are only slope (or scale factor) errors so a slope calibration at one temperature corrects at all temperatures. The output of the device (calibrated or uncalibrated) can be expressed as: 569809 *Calibrate for 2.982V at 25C Wide Operating Supply where T is the unknown temperature and To is a reference temperature, both expressed in degrees Kelvin. By calibrating the output to read correctly at one temperature the output at all temperatures is correct. Nominally the output is calibrated at 10 mV/K. To insure good sensing accuracy several precautions must be taken. Like any temperature sensing device, self heating can reduce accuracy. The LM135 should be operated at the lowest current suitable for the application. Sufficient current, of course, must be available to drive both the sensor and the calibration pot at the maximum operating temperature as well as any external loads. If the sensor is used in an ambient where the thermal resistance is constant, self heating errors can be calibrated out. This is possible if the device is run with a temperature stable current. Heating will then be proportional to zener voltage and therefore temperature. This makes the self heating error proportional to absolute temperature the same as scale factor errors. Minimum Temperature Sensing WATERPROOFING SENSORS Meltable inner core heat shrinkable tubing such as manufactured by Raychem can be used to make low-cost waterproof sensors. The LM335 is inserted into the tubing about 1/2 from the end and the tubing heated above the melting point of the core. The unfilled 1/2 end melts and provides a seal over the device. Average Temperature Sensing 569810 569804 Typical Applications Basic Temperature Sensor 569818 569802 www.national.com 6 IR = 1 mA IR = 0.5 mA* AWG 14 16 18 20 22 FEET 4000 2500 1600 1000 625 FEET 8000 5000 3200 2000 1250 24 400 800 LM135/LM235/LM335, LM135A/LM235A/LM335A Remote Temperature Sensing *For IR = 0.5 mA, the trim pot must be deleted. 569819 Wire length for 1C error due to wire drop Isolated Temperature Sensor 569820 Simple Temperature Controller 569805 7 www.national.com LM135/LM235/LM335, LM135A/LM235A/LM335A Simple Temperature Control 569821 Ground Referred Fahrenheit Thermometer 569822 *Adjust R2 for 2.554V across LM336. Adjust R1 for correct output. Centigrade Thermometer 569823 *Adjust for 2.7315V at output of LM308 www.national.com 8 LM135/LM235/LM335, LM135A/LM235A/LM335A Fahrenheit Thermometer 569824 *To calibrate adjust R2 for 2.554V across LM336. Adjust R1 for correct output. THERMOCOUPLE COLD JUNCTION COMPENSATION Compensation for Grounded Thermocouple 569806 *Select R3 for proper thermocouple type THERMOCOUPLE J R3 (1%) SEEBECK COEFFICIENT 377 52.3 V/C T 308 42.8 V/C 293 40.8 V/C K 45.8 6.4 V/C Adjustments: Compensates for both sensor and resistor tolerances 1. Short LM329B 2. Adjust R1 for Seebeck Coefficient times ambient temperature (in degrees K) across R3. 3. Short LM335 and adjust R2 for voltage across R3 corresponding to thermocouple type. J 14.32 mV K 11.17 mV T 11.79 mV S 1.768 mV S 9 www.national.com LM135/LM235/LM335, LM135A/LM235A/LM335A Single Power Supply Cold Junction Compensation 569811 *Select R3 and R4 for thermocouple type THERMOCOUPLE J R3 R4 SEEBECK COEFFICIENT 1.05K 385 52.3 V/C T 856 315 42.8 V/C K 816 300 40.8 V/C 128 46.3 6.4 V/C Adjustments: 1. Adjust R1 for the voltage across R3 equal to the Seebeck Coefficient times ambient temperature in degrees Kelvin. 2. Adjust R2 for voltage across R4 corresponding to thermocouple. J 14.32 mV T 11.79 mV K 11.17 mV S 1.768 mV S www.national.com 10 LM135/LM235/LM335, LM135A/LM235A/LM335A Centigrade Calibrated Thermocouple Thermometer 569812 Terminate thermocouple reference junction in close proximity to LM335. Adjustments: 1. Apply signal in place of thermocouple and adjust R3 for a gain of 245.7. 2. Short non-inverting input of LM308A and output of LM329B to ground. 3. Adjust R1 so that VOUT = 2.982V @ 25C. 4. Remove short across LM329B and adjust R2 so that VOUT = 246 mV @ 25C. 5. Remove short across thermocouple. Fast Charger for Nickel-Cadmium Batteries 569813 Adjust D1 to 50 mV greater VZ than D2. Charge terminates on 5C temperature rise. Couple D2 to battery. Differential Temperature Sensor 569807 11 www.national.com LM135/LM235/LM335, LM135A/LM235A/LM335A Differential Temperature Sensor 569814 Variable Offset Thermometer 569815 Adjust for zero with sensor at 0C and 10T pot set at 0C *Adjust for zero output with 10T pot set at 100C and sensor at 100C Output reads difference between temperature and dial setting of 10T pot www.national.com 12 LM135/LM235/LM335, LM135A/LM235A/LM335A Ground Referred Centigrade Thermometer 569816 Air Flow Detector* 569817 *Self heating is used to detect air flow Calibrated Temperature Error: The error between operating output voltage and case temperature at 10 mV/K over a temperature range at a specified operating current with the 25C error adjusted to zero. DEFINITION OF TERMS Operating Output Voltage: The voltage appearing across the positive and negative terminals of the device at specified conditions of operating temperature and current. Uncalibrated Temperature Error: The error between the operating output voltage at 10 mV/K and case temperature at specified conditions of current and case temperature. 13 www.national.com LM135/LM235/LM335, LM135A/LM235A/LM335A Physical Dimensions inches (millimeters) unless otherwise noted 8-Pin SOIC NS Package Number M08A TO-92 NS Package Z03A www.national.com 14 LM135/LM235/LM335, LM135A/LM235A/LM335A TO-46 NS Package Number H03H 15 www.national.com LM135/LM235/LM335, LM135A/LM235A/LM335A Precision Temperature Sensors Notes For more National Semiconductor product information and proven design tools, visit the following Web sites at: Products Design Support Amplifiers www.national.com/amplifiers WEBENCH(R) Tools www.national.com/webench Audio www.national.com/audio App Notes www.national.com/appnotes Clock and Timing www.national.com/timing Reference Designs www.national.com/refdesigns Data Converters www.national.com/adc Samples www.national.com/samples Interface www.national.com/interface Eval Boards www.national.com/evalboards LVDS www.national.com/lvds Packaging www.national.com/packaging Power Management www.national.com/power Green Compliance www.national.com/quality/green Switching Regulators www.national.com/switchers Distributors www.national.com/contacts LDOs www.national.com/ldo Quality and Reliability www.national.com/quality LED Lighting www.national.com/led Feedback/Support www.national.com/feedback Voltage Reference www.national.com/vref Design Made Easy www.national.com/easy PowerWise(R) Solutions www.national.com/powerwise Solutions www.national.com/solutions Serial Digital Interface (SDI) www.national.com/sdi Mil/Aero www.national.com/milaero Temperature Sensors www.national.com/tempsensors Solar Magic(R) www.national.com/solarmagic Wireless (PLL/VCO) www.national.com/wireless Analog University(R) www.national.com/AU THE CONTENTS OF THIS DOCUMENT ARE PROVIDED IN CONNECTION WITH NATIONAL SEMICONDUCTOR CORPORATION ("NATIONAL") PRODUCTS. NATIONAL MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ACCURACY OR COMPLETENESS OF THE CONTENTS OF THIS PUBLICATION AND RESERVES THE RIGHT TO MAKE CHANGES TO SPECIFICATIONS AND PRODUCT DESCRIPTIONS AT ANY TIME WITHOUT NOTICE. NO LICENSE, WHETHER EXPRESS, IMPLIED, ARISING BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. TESTING AND OTHER QUALITY CONTROLS ARE USED TO THE EXTENT NATIONAL DEEMS NECESSARY TO SUPPORT NATIONAL'S PRODUCT WARRANTY. EXCEPT WHERE MANDATED BY GOVERNMENT REQUIREMENTS, TESTING OF ALL PARAMETERS OF EACH PRODUCT IS NOT NECESSARILY PERFORMED. NATIONAL ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR BUYER PRODUCT DESIGN. BUYERS ARE RESPONSIBLE FOR THEIR PRODUCTS AND APPLICATIONS USING NATIONAL COMPONENTS. PRIOR TO USING OR DISTRIBUTING ANY PRODUCTS THAT INCLUDE NATIONAL COMPONENTS, BUYERS SHOULD PROVIDE ADEQUATE DESIGN, TESTING AND OPERATING SAFEGUARDS. EXCEPT AS PROVIDED IN NATIONAL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, NATIONAL ASSUMES NO LIABILITY WHATSOEVER, AND NATIONAL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY RELATING TO THE SALE AND/OR USE OF NATIONAL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness. National Semiconductor and the National Semiconductor logo are registered trademarks of National Semiconductor Corporation. All other brand or product names may be trademarks or registered trademarks of their respective holders. Copyright(c) 2008 National Semiconductor Corporation For the most current product information visit us at www.national.com National Semiconductor Americas Technical Support Center Email: support@nsc.com Tel: 1-800-272-9959 www.national.com National Semiconductor Europe Technical Support Center Email: europe.support@nsc.com German Tel: +49 (0) 180 5010 771 English Tel: +44 (0) 870 850 4288 National Semiconductor Asia Pacific Technical Support Center Email: ap.support@nsc.com National Semiconductor Japan Technical Support Center Email: jpn.feedback@nsc.com IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP(R) Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connectivity www.ti.com/wirelessconnectivity TI E2E Community Home Page www.ti.com/video e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2011, Texas Instruments Incorporated