Low Insertion Force Peel-A-Way(R) PGA Sockets 5 Energy Way, P.O. Box 1019, West Warwick, RI 02893 USA Tel. 800-424-9850/401-823-5200 * Fax 401-823-8723 * Email info@advintcorp.com * Internet http://www.advintcorp.com Peel-A-Way(R) Low Insertion Force PGA Sockets Polyimide Film .005 (.13) Features: How To Order * Disposable carriers peel away after soldering. * Peel-A-Way(R) tabs and full grid wafer supplied on all Peel-A-Way(R) PGA sockets. * Maximum air flow under PGA for greater cooling. * Better flux rinse and cleaning. * Allows inspection of solder joints on both sides of PCB. * Lowest profile with use of type -210 terminal. * Peel-A-Way(R) disposable socket terminal carrier available in any configuration shown or custom designed to meet your specifications. 1 KS 068 -85 T G Footprint Dash # If Applicable* Contact Plating G - Gold T - Tin-Lead Body Type KS - 2.5 oz.(70.85 g) avg. insertion force KIS - 1 oz.(28.34 g) avg. insertion force Terminal Plating G - Gold T - Tin-Lead Number of Pins 004 to 484 *See pages 37 - 64 for PGA footprints Terminal Type See next page for terminal types Polyimide Film Polyimide Film Terminals and Contacts: Peel away after soldering to PCB. Terminal: Brass - Copper Alloy (C36000) ASTM-B-16 Contact: Beryllium Copper (C17200) ASTM-B-194 PCB Solder fillets visible both sides for inspection and cleaning. Solder Preform: How To Use: 63% Tin, 37% Lead Plating: Terminal: Gold over Nickel or Tin-Lead over Nickel Contact: Gold over Nickel or Tin-Lead over Nickel Gold per MIL-G-45204 Tin-Lead per MIL-P-81728 Nickel per QQ-N-290 1. Place socket in PCB. 2. Send PCB and socket through soldering operation. 3. Peel away polyimide film carrier. Sealant Options RTV Seal Body Material: KS/KIS - Polyimide Film -269C to 400C (-452F to 752F) RTV Sealed Tape Sealed To order: Add RTV to end of part # Note: RTV not available with HCS or HCIS Insulators To order: Add 3M to end of part # Peel-A-Way(R) covered by patent rights issued and/or pending. inch/(mm) Products shown covered by patents issued and/or pending. Specifications subject to change without notice. Page 34 Low Insertion Force Peel-A-Way(R) PGA Sockets 5 Energy Way, P.O. Box 1019, West Warwick, RI 02893 USA Tel. 800-424-9850/401-823-5200 * Fax 401-823-8723 * Email info@advintcorp.com * Internet http://www.advintcorp.com Terminals for Peel-A-Way(R) Low Insertion Force PGA Sockets Standard Quick Turn Terminals Type -33 Type -51 .072 Dia. (1.83) Type -04 .072 Dia. (1.83) .072 Dia. (1.83) .165 (4.19) .110 (2.79) .020 Dia. (.51) .020 Dia. (.51) Type -50 .072 Dia. (1.83) .130 (3.30) .125 (3.18) .058 Dia. (1.47) .120 (3.05) .095 (2.41) .110 (2.79) .095 (2.41) .028 Dia. (.71) Type -176 Type -85 Type -49 .031 (.79) .155 (3.94) .038 Dia. (.97) .028 Dia. (.71) Type -210 Not for use with RTV Seal .058 Dia. (1.47) .072 Dia. (1.83) .031 (.79) .053 Dia. (1.35) .058 Dia. (1.47) .031 (.79) .155 (3.94) .015 (.38) .155 (3.95) .034 Dia. (.86) .034 Dia. (.86) Quick turn delivery available on standard terminal types. .155 (3.94) Additional terminal types available. See terminal section for detailed terminal information. Solder Preform PGA Sockets - Intrusive Reflow Application Polyimide Film Solder Preform PC Board Preform After Solder Flow Solder Preform Terminals Type -151 Type -150 Features: .072 Dia. (1.83) * Combines the labor of socket loading and solder application into one operation. * Eliminates the use of solder paste and screening operation. * Eliminates solder bridges and/or solder shorts due to excess solder. * Insures a reliable solder joint with controlled solder volume. * Ideal for surface mount and mixed technology applications. * For custom solder preform terminal applications consult factory. * See previous page for material specifications and how to order information. .072 Dia. (1.83) .072 Dia. (1.83) .165 .165 (4.19) (4.19) .130 (3.30) Solder Preform Solder Preform .125 .125 (3.18) (3.18) .020 Dia. (.51) .110 (2.79) .020 Dia. (.51) .020 Dia. (.51) Type -111 .058 Dia. (1.47) Solder Preform .031 (.79) .155 (3.94) .038 Dia. (.97) Peel-A-Way(R) covered by patent rights issued and/or pending. inch/(mm) Products shown covered by patents issued and/or pending. Specifications subject to change without notice. Page 35