5 Energy Way, P.O. Box 1019, West Warwick, RI 02893 USA Tel. 800-424-9850/401-823-5200 • Fax 401-823-8723 • Email info@advintcorp.com • Internet http://www.advintcorp.com
Polyimide Film
.005
(.13)
RTV Sealed Tape Sealed
RTV
Seal
To order: Add 3M to end of part #
To order: Add RTV to end of part #
Note: RTV not available with HCS or HCIS Insulators
Low Insertion Force
Peel-A-Way®PGA Sockets
Features:
•Disposable carriers peel away after
soldering.
•Peel-A-Way®tabs and full grid wafer
supplied on all Peel-A-Way®PGA sockets.
•Maximum air flow under PGA for greater
cooling.
•Better flux rinse and cleaning.
•Allows inspection of solder joints on both
sides of PCB.
•Lowest profile with use of type -210
terminal.
•Peel-A-Way®disposable socket terminal
carrier available in any configuration shown
or custom designed to meet your
specifications.
Terminals and Contacts:
Terminal: Brass - Copper Alloy (C36000)
ASTM-B-16
Contact: Beryllium Copper (C17200)
ASTM-B-194
Solder Preform:
63% Tin, 37% Lead
Plating:
Terminal: Gold over Nickel or
Tin-Lead over Nickel
Contact: Gold over Nickel or
Tin-Lead over Nickel
Gold per MIL-G-45204
Tin-Lead per MIL-P-81728
Nickel per QQ-N-290
Body Material:
KS/KIS - Polyimide Film
-269˚C to 400˚C (-452˚F to 752˚F)
Peel-A-Way®Low Insertion Force PGA Sockets
How To Order
1 KS 068 -85 T G
Footprint Dash #
If Applicable*
Terminal Plating
G - Gold
T - Tin-Lead
Contact Plating
G - Gold
T - Tin-Lead
Terminal Type
See next page
for terminal types
Body Type
KS - 2.5 oz.(70.85 g) avg. insertion force
KIS - 1 oz.(28.34 g) avg. insertion force
Number of Pins
004 to 484
*See pages 37 - 64
for PGA footprints
Polyimide Film
Polyimide Film
Peel away
after soldering
to PCB.
PCB
Solder fillets visible both sides
for inspection and cleaning.
Sealant Options
Peel-A-Way®covered by patent rights issued and/or pending.
How To Use:
1. Place socket in PCB.
2. Send PCB and socket through soldering operation.
3. Peel away polyimide film carrier.
inch/(mm)Products shown covered by patents issued and/or pending. Specifications subject to change without notice. Page 34
Type -150
.072 Dia.
(1.83)
.165
(4.19)
.125
(3.18)
.020 Dia.
(.51)
.072 Dia.
(1.83)
.165
(4.19)
.125
(3.18)
.020 Dia.
(.51)
Solder
Preform
5 Energy Way, P.O. Box 1019, West Warwick, RI 02893 USA Tel. 800-424-9850/401-823-5200 • Fax 401-823-8723 • Email info@advintcorp.com • Internet http://www.advintcorp.com
inch/(mm)Products shown covered by patents issued and/or pending. Specifications subject to change without notice. Page 35
Low Insertion Force
Peel-A-Way®PGA Sockets
Peel-A-Way®covered by patent rights issued and/or pending.
Terminals for Peel-A-Way®Low Insertion Force PGA Sockets
Solder Preform Terminals
Standard Quick Turn Terminals
Type -33
.072 Dia.
(1.83)
.165
(4.19)
.125
(3.18)
.020 Dia.
(.51)
Type -51
.072 Dia.
(1.83)
.020 Dia.
(.51)
.110
(2.79)
.130
(3.30)
Type -151
.072 Dia.
(1.83)
.020 Dia.
(.51)
.110
(2.79)
.130
(3.30)
Solder
Preform
Type -04
.072 Dia.
(1.83)
.028 Dia.
(.71)
.120
(3.05)
.110
(2.79)
Type -49
.072 Dia.
(1.83)
.028 Dia.
(.71)
.095
(2.41)
.095
(2.41)
Type -85
.058 Dia.
(1.47)
.038 Dia.
(.97)
.155
(3.94)
.031
(.79)
Solder Preform PGA Sockets - Intrusive Reflow Application
Polyimide Film
Solder Preform
PC Board
Preform After
Solder Flow
Features:
•Combines the labor of socket loading and
solder application into one operation.
•Eliminates the use of solder paste and
screening operation.
•Eliminates solder bridges and/or solder
shorts due to excess solder.
•Insures a reliable solder joint with
controlled solder volume.
•Ideal for surface mount and mixed
technology applications.
•For custom solder preform terminal
applications consult factory.
•See previous page for material
specifications and how to order
information.
Quick turn delivery
available on standard terminal types.
Additional terminal types available.
See terminal section for detailed terminal information.
Type -50
.072 Dia.
(1.83)
.053 Dia.
(1.35)
.155
(3.94)
.031
(.79)
Type -176
.058 Dia.
(1.47)
.155
(3.95)
.031
(.79)
.034 Dia.
(.86)
Type -210
Not for use with RTV Seal
.058 Dia.
(1.47)
.034 Dia.
(.86)
.015
(.38) .155
(3.94)
.058 Dia.
(1.47)
.038 Dia.
(.97)
.155
(3.94)
.031
(.79)
Type -111
Solder
Preform
