P/N: TS8FSDMAR62ISI TS16FSDMAR62ISI Industrial Grade SD card Features Description RoHS compliant product Compatible with SD Specification Ver. 3.01 Transcend's Industrial Temp SD cards combine the making them the best solution for tough industrial Supports Speed Class Specification up to Class 10 Manufactured with SLC NAND Flash chips for extra long life and stability Support S.M.A.R.T. Function environments where performance and reliability are Operating Temperature: -40 ~ 85C essential. Mechanical Write Protection Switch Built-in ECC and Wear leveling Support ESD IEC 61000-4-2 advantages of large storage capacity and industrial range (-40~85C) operating temperature flexibility, Architecture Pin Definition SD Mode Pin No. Name 1 CD/DAT3 2 Description SPI Mode Name Description Card Detect/Data Line [Bit3] CS Reserved CMD Command/Response DI Chip Select 3 VSS1 Supply voltage ground VSS Data In 4 VDD Supply voltage VDD Supply voltage 5 CLK Clock SCLK Clock 6 VSS2 Supply voltage ground VSS2 Supply voltage ground 7 DAT0 Data Line [Bit0] DO Data out 8 DAT1 Data Line [Bit1] RSV Reserved 9 DAT2 Data Line [Bit2] RSV Reserved Specifications Physical Specification Form Factor SD specification Dimensions (mm) Length Width Height SD SD3.01 32.00 0.1 24.00 0.1 2.10 0.15 Bus Mode/ Power Consumption Value(Max.) Default Mode (25MHz) High Speed mode (50MHz) Read 100mA Write 100mA Idle 0.5mA Read 200mA Write 200mA Idle 0.5mA Note: Power consumption is referred to Section 6.6.3 of the SDA Physical Layer Specification, Version 3.01 Environmental Specifications Operating Temperature - 40 to 85 Storage Temperature - 40 to 85 Durability 10.000 mating cycles Drop test 1.5m free fall Regulator CE/FCC/BSMI Product Description 1.Features 1.1 Lock Function Support for password protected locking and unlocking of SD devices. It uses the LOCK/UNLOCK command(CMD42) which is available in SD command sets. 1.2 Built-in ECC Engine In event of errors, the combined data allow the recovery of the original data. The number of errors that can be recovered depends on the algorithm used. 1.3 Wear-leveling This function means the data are no longer tied to a single physical area, which can extend Card's life expectancy. 1.4 S.M.A.R.T. function Transcend Industrial SD Card supports S.M.A.R.T. command (ACMD13) that allows the user to read the health information of the SD. Transcend also define some innovated S.M.A.R.T. features which allows the user to evaluate the status of the SD in a much more efficient way. 2.Bus Topology The SD Memory Card system defines two alternative communication protocols:SD and SPI. The host system can choose either one of modes. The card detects which mode is request by host when the reset command is received and expects all further communication to be in the same communication mode. 2.1 SD Bus For more details, refer to Section 3.5.1 of the SDA Physical Layer Specification, Version 3.01. 2.2 SPI Bus For more details, refer to Section 3.5.2 of the SDA Physical Layer Specification, Version 3.01. 3.SD card Register information 3.1 OCR register The OCR register stores the VDD voltage profile of the card,refer to Section 5.1 of the SDA Physical Layer Specification, Version 3.01 for more information. 3.2 CID register The Card Identification (CID) register is 128 bits wide. It contains the card identification information used during the card identification phase. Every individual flash card shall have a unique identification number. The structure of the CID register is defined in the following paragraphs: * MID An 8-bit binary number that identifies the card manufacturer. The MID number is controlled, defined, and allocated to a SD Memory Card manufacturer by the SD-3C, LLC. This procedure is established to ensure uniqueness of the CID register. * OID A 2-character ASCII string that identifies the card OEM and/or the card contents (when used as a distribution media either on ROM or FLASH cards). The OID number is controlled, defined, and allocated to a SD Memory Card manufacturer by the SD-3C, LLC. This procedure is established to ensure uniqueness of the CID register. *PNM The product name is a string, 5 ASCII characters long. PNM can be customized by Transcend * PRV The product revision is composed of two Binary Coded Decimal (BCD) digits, four bits each, representing an . revision number. The is the most significant nibble and is the least significant nibble. As an example, the PRV binary value field for product revision 6. will be: 0110 0010 * PSN The Serial Number is 32 bits of binary number. PSN Number can be customized by Transcend * MDT The manufacturing date composed of two hexadecimal digits, one is 8 bit representing the year(y) and the other is four bits representing the month(m). The field [11:8] is the month code. 1 = January. The y field [19:12] is the year code. 0 = 2000. As an example, the binary value of the Date field for production date April will be: 00000001 0100. MDT can be customized by Transcend * CRC CRC7 checksum (7 bits). 3.3 CSD register The following sections describe the CSD fields and the relevant data types for the standard and High Capacity SD Memory Card. CSD Version 1.0 is applied Capacity SD Memory Card and CSD Version is applied to 2.0 is applied to only the High Capacity SD Memory Card. The field name in parenthesis is set to fixed value and indicates that the host is not necessary to refer these fields. The fixed values enables host, which refers to these fields, to keep compatibility to CSD Version 1.0. The Cell Type field is coded as follows: R = readable, W(1) = writable once, W = multiple writable. 3.3.1 CSD Register Structure CSD_STRUCTURE CSD Structure version Card capacity 0 CSD Version1.0 Standard Capacity 1 CSD Version2.0 High Capacity and Extended Capacity 2-3 reserved 3.3.2 CSD Register Structure (CSD Version 1.0) 3.3.3 CSD Register (CSD Version 2.0) 3.4 RCA register The writable 16-bit relative card address register carries the card address that is published by the card during the card identification. Refer to Section 5.4 in the SDA Physical Layer Specification, Version 3.01 for more information. 3.5 SCR register In addition to the CSD register, there is another configuration register named SD CARD configuration Register, SCR provide information on the SD memory card's special feature that were configured into the given card.Refer to Section 5.6 in the SDA Physical Layer Specification, Version 3.01 for more information. 3.6 SSR register The SD status contains status bits that are related to the SD memory card proprietary features and may be used for future application-specific usage. The SD Status structure is described in Section 4.10.2 in the SDA Physical Layer Specification, Version 3.01. The above technical information is based on industry standard data and has been tested to be reliable. However, Transcend makes no warranty, either expressed or implied, as to its accuracy and assumes no liability in connection with the use of this product. Transcend reserves the right to make changes to the specifications at any time without prior notice.