114- 1002PIDG FASTON Receptacle Contacts
Rev D2 of 13 Tyco Electronics Corporation
2. REFERENCE MATERIAL
2.1. Revision Summary
Revisions to this application specification per EC 0990--1188--02 include:
SUpdated document to corporate requirements
SNew logo and format
2.2. Customer Assistance
Reference Product Part Number 640903 and Product Code 1164 are representative of PIDG FASTON
receptacle contacts. Use of these numbers will identify the product line and expedite your inquiries through a
service network established to help you obtain product and tooling information. Such information can be
obtained through a local Tyco Electronics Representative or, after purchase, by calling Product Information at
the number at the bottom of page 1.
2.3. Drawings
Customer Drawings for product part numbers are available from the service network. If there is a conflict
between the information contained in the Customer Drawings and this specification or with any other technical
documentation supplied, call Product Information at the number at the bottom of page 1.
2.4. Specifications
Product Specification 108--1033 provides product performance and test information.
2.5. Instructional Material
Instruction Sheets (408--series) provide product assembly instructions or tooling setup and operation
procedures and Customer Manuals (409--series) provide machine setup and operation procedures. Documents
available which pertain to this product are:
408--1559 Hand Crimping Tool 48518--2
408--2423 Crimping Die Assembly 69877--2
408--2822 Crimping Die Assemblies 59826--1, 59827--1, and 59828--1
408--2823 TETRA--CRIMP* Hand Crimping Tool 59824--1
408--3295 Preparing Reel of Contacts for Application Tooling
408--7278 Hand Crimping Tool 90185--1
408--7424 Checking Terminal Crimp Height Gaging Die Closure
408--7426 Hand Crimping Tool 90246--1
408--7563 Crimping Die Assemblies 90240--2 and 90248--2
408--7903 Hand Crimping Tool 90276--2
408--8040 Heavy Duty Miniature Quick--Change Applicators (Side--Feed Type) with
Mechanical Feed System
408--8044 Miniature Quick--Change Applicator for Tape--Mounted Closed Barrel Terminals
408--8063 TETRA--CRIMP Heavy--Duty Miniature Quick--Change Applicators (Side--Feed Type) with
Air Feed for FASTON Terminals
408--8082 Miniature Quick--Change Applicators (Side--Feed Type) With Air Feed for
Tape--Mounted PIDG Terminals
408--9816 Handling of Reeled Products
409--1993 AMP--TAPETRONIC* Machine 69875
409--5128 AMP--O--LECTRIC* Model “K” Terminating Machine 565435--5
409--5842 AMP--O--LECTRIC Model “G” Terminating Machine 354500--[ ]
409--5852 AMPOMATOR* CLS III--G Lead--Making Machine 122500--[ ]
409--5866 AMPOMATOR CLS IV Lead--Making Machine 217500--[ ]
409--5878 AMPOMATOR CLS IV+ Lead--Making Machine 356500--[ ]
409--10016 Entry Level Terminator (ELT) Machine 1338600--[ ]
3. REQUIREMENTS
3.1. Storage
A. Ultraviolet Light
Prolonged exposure to ultraviolet light may deteriorate the chemical composition used in the contact
insulation material.