S-19212BxxA Series
www.sii-ic.com
FOR AUTOMOTIVE 125
°
C OPERATION HIGH-WITHSTAND VOLTAGE LOW DROPOUT
CMOS VOLTAGE REGULATO
R
© SII Semiconductor Corporation, 2015-2016 Rev.4.0_00
1
The S-19212BxxA Series, developed by using high-withstand voltage CMOS process technology, is a positive voltage
regulator with a high-withstand voltage, low current consumption and high-accuracy output voltage, and has a built-in ON /
OFF circuit.
The S-19212BxxA Series operates at the maximum operation voltage of 36 V and a low current consumption of 6.5 μA
typ., and has a built-in low on-resistance output transistor which provides a very small dropout voltage and a large output
current.
Also, a built-in overcurrent protection circuit to limit overcurrent of the output transistor and a built-in thermal shutdown
circuit to limit heat are included.
Caution This product can be used in vehicle equipment and in-vehicle equipment. Before using the product in the
purpose, contact to SII Semiconductor Corporation is indispensable.
Features
Output voltage: 2.5 V to 16.0 V, selectable in 0.1 V step
Input voltage: 3.0 V to 36 V
Output voltage accuracy: ±2.0% (Tj = 40°C to +125°C)
Current consumption: During operation: 6.5 μA typ., 8.5 μA max. (Tj = 40°C to +125°C)
During power-off: 0.1 μA typ., 3.5 μA max. (Tj = 40°C to +125°C)
Output current: Possible to output 250 mA (at VIN VOUT(S) + 2.0 V)*1
Input capacitor: A ceramic capacitor can be used. (1.0 μF or more)
Output capacitor: A ceramic capacitor can be used. (1.0 μF to 100 μF)
Built-in overcurrent protection circuit: Limits overcurrent of output transistor.
Built-in thermal shutdown circuit: Detection temperature 165°C typ.
Built-in ON / OFF circuit: Ensures long battery life.
Built-in discharge shunt circuit: Discharges the electric charge of the output capacitor during power-off.
(RLOW = 70 kΩ typ.)
Operation temperature range: Ta = 40°C to +125°C
Lead-free (Sn 100%), halogen-free
Withstand 45 V load dump
AEC-Q100 qualified*2: HSOP-8A, HSOP-6, SOT-89-5, SOT-23-5 package products
*1. Please make sure that the loss of the IC will not exceed the power dissipation when the output current is large.
*2. TO-252-5S(A) package product is in the process of AEC-Q100.
Contact our sales office for details.
Applications
Constant-voltage power supply for electrical application for vehicle interior
Constant-voltage power supply for home electric appliance
For automotive use (engine, transmission, suspension, ABS, related-devices for EV / HEV / PHEV, etc.)
Packages
TO-252-5S(A)
HSOP-8A
HSOP-6
SOT-89-5
SOT-23-5
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
S-19212BxxA Series Rev.4.0_00
2
Block Diagram
Reference
voltage circuit
ON / OFF
*1
ON / OFF circuit
+
VIN
VSS
VOUT
Overcurrent protection
circuit
Thermal shutdown circuit
*1
*2
*1. Parasitic diode
*2. The ON / OFF circuit controls the internal circuit and the output transistor.
Figure 1
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.4.0_00 S-19212BxxA Series
3
AEC-Q100 Qualified*1
This IC supports AEC-Q100 for operation temperature grade 1.
Contact our sales office for details of AEC-Q100 reliability specification.
*1. TO-252-5S(A) package product is in the process of AEC-Q100.
Contact our sales office for details.
Product Name Structure
Users can select the output voltage and package type for the S-19212BxxA Series. Refer to "1. Product name"
regarding the contents of product name, "2. Packages" regarding the package drawings and "3. Product name
list" for details of product names.
1. Product name
S-19212 B xx A - xxxx U
Package abbreviation and IC packing specifications*1
V5T2: TO-252-5S(A), Tape
E8T1: HSOP-8A, Tape
E6T1: HSOP-6, Tape
U5T1: SOT-89-5, Tape
M5T1: SOT-23-5, Tape
Operation temperature
A: Ta = 40°C to +125°C
Set output voltage
25 to G0
(e.g., when the set output voltage is 2.5 V, it is expressed as 25.
when the set output voltage is 10.0 V, it is expressed as A0.
when the set output voltage is 11.0 V, it is expressed as B0.
when the set output voltage is 16.0 V, it is expressed as G0.)
Product type*2
B: ON / OFF pin positive logic
Environmental code
U: Lead-free (Sn 100%), halogen-free
*1. Refer to the tape drawing.
*2. Refer to "3. ON / OFF pin" in " Operation".
2. Packages
Table 1 Package Drawing Codes
Package Name Dimension Tape Reel Land
TO-252-5S(A) VA005-A-P-SD VA005-A-C-SD VA005-A-R-SD VA005-A-L-SD
HSOP-8A FH008-A-P-SD FH008-A-C-SD FH008-A-R-SD FH008-A-L-SD
HSOP-6 FH006-A-P-SD FH006-A-C-SD FH006-A-R-S1
SOT-89-5 UP005-A-P-SD UP005-A-C-SD UP005-A-R-SD
SOT-23-5 MP005-A-P-SD MP005-A-C-SD MP005-A-R-SD
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
S-19212BxxA Series Rev.4.0_00
4
3. Product name list
Table 2
Output Voltage
TO-252-5S(A)
HSOP-8A HSOP-6 SOT-89-5 SOT-23-5
2.5 V
±
2.0%
S-19212B25A-V5T2U
S-19212B25A-E8T1U S-19212B25A-E6T1U S-19212B25A-U5T1U S-19212B25A-M5T1U
3.0 V
±
2.0%
S-19212B30A-V5T2U
S-19212B30A-E8T1U S-19212B30A-E6T1U S-19212B30A-U5T1U S-19212B30A-M5T1U
3.3 V
±
2.0%
S-19212B33A-V5T2U
S-19212B33A-E8T1U S-19212B33A-E6T1U S-19212B33A-U5T1U S-19212B33A-M5T1U
5.0 V
±
2.0%
S-19212B50A-V5T2U
S-19212B50A-E8T1U S-19212B50A-E6T1U S-19212B50A-U5T1U S-19212B50A-M5T1U
5.5 V
±
2.0%
S-19212B55A-V5T2U
S-19212B55A-E8T1U S-19212B55A-E6T1U S-19212B55A-U5T1U S-19212B55A-M5T1U
6.0 V
±
2.0%
S-19212B60A-V5T2U
S-19212B60A-E8T1U S-19212B60A-E6T1U S-19212B60A-U5T1U S-19212B60A-M5T1U
7.0 V
±
2.0%
S-19212B70A-V5T2U
S-19212B70A-E8T1U S-19212B70A-E6T1U S-19212B70A-U5T1U S-19212B70A-M5T1U
8.0 V
±
2.0%
S-19212B80A-V5T2U
S-19212B80A-E8T1U S-19212B80A-E6T1U S-19212B80A-U5T1U S-19212B80A-M5T1U
9.0 V
±
2.0%
S-19212B90A-V5T2U
S-19212B90A-E8T1U S-19212B90A-E6T1U S-19212B90A-U5T1U S-19212B90A-M5T1U
10.5 V
±
2.0%
S-19212BA5A-V5T2U
S-19212BA5A-E8T1U S-19212BA5A-E6T1U S-19212BA5A-U5T1U S-19212BA5A-M5T1U
12.0 V
±
2.0%
S-19212BC0A-V5T2U
S-19212BC0A-E8T1U S-19212BC0A-E6T1U S-19212BC0A-U5T1U S-19212BC0A-M5T1U
12.5 V
±
2.0%
S-19212BC5A-V5T2U
S-19212BC5A-E8T1U S-19212BC5A-E6T1U S-19212BC5A-U5T1U S-19212BC5A-M5T1U
15.0 V
±
2.0%
S-19212BF0A-V5T2U
S-19212BF0A-E8T1U S-19212BF0A-E6T1U S-19212BF0A-U5T1U S-19212BF0A-M5T1U
Remark Please contact our sales office for products with specifications other than the above output voltage.
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.4.0_00 S-19212BxxA Series
5
Pin Configurations
1. TO-252-5S(A)
3
Top view
51 42
Figure 2
Table 3
Pin No. Symbol Description
1
VOUT Output voltage pin
2 ON / OFF ON / OFF pin
3
VSS GND pin
4
NC*1 No connection
5 VIN Input voltage pin
*1. The NC pin is electrically open.
The NC pin can be connected to the VIN pin or the VSS pin.
2. HSOP-8A
8
5
6
7
1
4
3
2
Bottom view
Top view
1
4
3
2
8
5
6
7
*1
Figure 3
Table 4
Pin No. Symbol Description
1 VOUT
Output voltage pin
2
NC*2 No connection
3
NC*2 No connection
4 ON / OFF ON / OFF pin
5 VSS GND pin
6
NC*2 No connection
7
NC*2 No connection
8 VIN Input voltage pin
*1. Connect the heat sink of backside at shadowed area to the board, and set electric potential GND.
However, do not use it as the function of electrode.
*2. The NC pin is electrically open. The NC pin can be connected to the VIN pin or the VSS pin.
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
S-19212BxxA Series Rev.4.0_00
6
3. HSOP-6
132
465
Top view
Figure 4
Table 5
Pin No. Symbol Description
1 VOUT
Output voltage pin
2 VSS GND pin
3 ON / OFF ON / OFF pin
4
NC*1 No connection
5 VSS GND pin
6 VIN Input voltage pin
*1. The NC pin is electrically open. The NC pin can be connected to the VIN pin or the VSS pin.
4. SOT-89-5
132
45
Top view
Figure 5
Table 6
Pin No. Symbol Description
1
NC*1 No connection
2 VSS GND pin
3 VIN Input voltage pin
4 VOUT
Output voltage pin
5 ON / OFF ON / OFF pin
*1. The NC pin is electrically open. The NC pin can be connected to the VIN pin or the VSS pin.
5. SOT-23-5
132
45
Top view
Figure 6
Table 7
Pin No. Symbol Description
1 VIN Input voltage pin
2 VSS GND pin
3
NC*1 No connection
4 ON / OFF ON / OFF pin
5 VOUT Output voltage pin
*1. The NC pin is electrically open. The NC pin can be connected to the VIN pin or the VSS pin.
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.4.0_00 S-19212BxxA Series
7
Absolute Maximum Ratings
Table 8
(Ta = +25°C unless otherwise specified)
Item Symbol Absolute Maximum Rating Unit
Input voltage VIN V
SS0.3 to VSS + 45 V
VON / OFF V
SS0.3 to VIN + 0.3 VSS + 45 V
Output voltage VOUT V
SS0.3 to VIN + 0.3 VSS + 45 V
Output current IOUT 280 mA
Junction temperature Tj 40 to +150 °C
Operation ambient temperature Topr 40 to +125 °C
Storage temperature Tstg 40 to +150 °C
Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical
damage. These values must therefore not be exceeded under any conditions.
Thermal Resistance Value
Table 9
Item Symbol Condition Min. Typ. Max. Unit
Junction-to-ambient
thermal resistance*1 θja
TO-252-5S(A)
Board 190 − °C/W
Board 258 − °C/W
Board 338 − °C/W
Board 430 − °C/W
Board 529 − °C/W
HSOP-8A
Board 1115 − °C/W
Board 282 − °C/W
Board 342 − °C/W
Board 443 − °C/W
Board 535 − °C/W
HSOP-6
Board 1106 − °C/W
Board 282 − °C/W
Board 351 − °C/W
Board 448 − °C/W
SOT-89-5
Board 1123 − °C/W
Board 290 − °C/W
Board 353 − °C/W
Board 441 − °C/W
SOT-23-5 Board 1180 − °C/W
Board 2143 − °C/W
*1. Test environment: compliance with JEDEC STANDARD JESD51-2A
Remark Refer to " Thermal Characteristics" for details of power dissipation and test board.
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
S-19212BxxA Series Rev.4.0_00
8
Electrical Characteristics
Table 10
(T
j
= 40°C to +125°C unless otherwise specified)
Item Symbol Condition Min. Typ. Max. Unit Test
Circuit
Output voltage*1 VOUT(E) VIN = VOUT(S) + 2.0 V, IOUT = 10 mA VOUT(S)
× 0.980 VOUT(S) VOUT(S)
× 1.020 V 1
Output current*2 IOUT VIN VOUT(S) + 2.0 V 250*4 − − mA 3
Dropout voltage*3 Vdrop IOUT = 125 mA, Ta = +25°C 0.35 V 1
IOUT = 250 mA, Ta = +25°C 0.80 V 1
Line regulation
OUTIN
1OUT
VV
V
Δ
Δ
VOUT(S) + 0.5 V VIN 36 V, IOUT = 10 mA 0.01 0.03 %/V 1
Load regulation ΔVOUT2
VIN = VOUT(S) + 2.0 V,
2.5 V VOUT
(
S
)
< 5.1 V, 0.1 mA IOUT 40 mA 16 30 mV 1
VIN = VOUT(S) + 2.0 V,
5.1 V VOUT
(
S
)
< 12.1 V, 0.1 mA IOUT 40 mA 16 35 mV 1
VIN = VOUT(S) + 2.0 V,
12.1 V VOUT
(
S
)
16.0 V, 0.1 mA IOUT 40 mA 16 40 mV 1
Current consumption
during operation ISS1 VIN = 18.0 V,
VON / OFF = VIN, IOUT = 0.01 mA 6.5 8.5 μA2
Current consumption
during power-off ISS2 VIN = 18.0 V,
VON / OFF = 0 V, no load 0.1 3.5 μA2
Input voltage VIN 3.0 36 V
ON / OFF pin
input voltage "H" VSH VIN = 18.0 V, RL = 1.0 kΩ,
determined by VOUT output level 1.5 − − V 4
ON / OFF pin
input voltage "L" VSL VIN = 18.0 V, RL = 1.0 kΩ,
determined by VOUT output level − − 0.25 V 4
ON / OFF pin
input current "H" ISH VIN = 18.0 V, VON / OFF = VIN 0.1 0.1 μA4
ON / OFF pin
input current "L" ISL VIN = 18.0 V, VON / OFF = 0 V 0.1 0.1 μA4
Ripple rejection |RR|
VIN = VOUT(S) + 2.0 V,
f = 100 Hz,
ΔVrip = 0.5 Vrms,
IOUT = 10 mA,
Ta = +25°C
2.5 V VOUT(S) < 3.6 V 45 dB 5
3.6 V VOUT(S) < 6.1 V 40 dB 5
6.1 V VOUT(S) < 10.1 V 35 dB 5
10.1 V VOUT(S) 16.0 V 30 dB 5
Short-circuit current Ishort VIN = VOUT(S) + 2.0 V,
VON / OFF = VIN, VOUT = 0 V, Ta = +25°C 120 mA 3
Thermal shutdown
detection temperature TSD Junction temperature 165 °C
Thermal shutdown
release temperature TSR Junction temperature 140 °C
Discharge shunt
resistance during
power-off
RLOW VIN = 18.0 V, VON / OFF = 0 V, VOUT = 2.0 V 70 kΩ6
*1. V
OUT(S): Set output voltage
VOUT(E): Actual output voltage
The output voltage when VIN = VOUT(S) + 2.0 V, IOUT = 10 mA
*2. The output current at which the output voltage becomes 95% of VOUT(E) after gradually increasing the output current.
*3. V
drop = VIN1 (VOUT3 × 0.98)
VIN1 is the input voltage at which the output voltage becomes 98% of VOUT3 after gradually decreasing the input voltage.
VOUT3 is the output voltage when VIN = VOUT(S) + 2.0 V, and IOUT = 125 mA or 250 mA.
*4. Due to limitation of the power dissipation, this value may not be satisfied. Attention should be paid to the power
dissipation when the output current is large.
This specification is guaranteed by design.
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.4.0_00 S-19212BxxA Series
9
Test Circuits
+
VOUT
VIN
VSS
+
V
A
ON / OFF
Set to ON
Figure 7 Test Circuit 1
VOUT
VIN
VSS
ON / OFF
Set to V
IN
or GND
+
A
Figure 8 Test Circuit 2
Set to ON
VOUT
VIN
VSS
+
V
+
A
ON / OFF
Figure 9 Test Circuit 3
VOUT
VIN
VSS
+
V
ON / OFF
+
A RL
Figure 10 Test Circuit 4
VOUT
VIN
VSS
+
V
ON / OFF R
L
Set to ON
Figure 11 Test Circuit 5
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
S-19212BxxA Series Rev.4.0_00
10
Set to GND
VOUT
VIN
VSS
+
V
ON / OFF
+
A
Figure 12 Test Circuit 6
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.4.0_00 S-19212BxxA Series
11
Standard Circuit
C
IN*1
C
L*2
Input Output
GND
Single GND
VOUT
VIN
VSS
ON / OFF
*1. CIN is a capacitor for stabilizing the input.
*2. CL is a capacitor for stabilizing the output.
Figure 13
Caution The above connection diagram and constants will not guarantee successful operation. Perform
thorough evaluation using an actual application to set the constants.
Condition of Application
Input capacitor (CIN): A ceramic capacitor with capacitance of 1.0 μF or more is recommended.
Output capacitor (CL): A ceramic capacitor with capacitance of 1.0 μF to 100 μF is recommended.
Caution Generally, in a voltage regulator, an oscillation may occur depending on the selection of the external
parts. Perform thorough evaluation including the temperature characteristics with an actual
application using the above capacitors to confirm no oscillation occurs.
Selection of Input Capacitor (CIN) and Output Capacitor (CL)
The S-19212BxxA Series requires CL between the VOUT pin and the VSS pin for phase compensation. The operation
is stabilized by a ceramic capacitor with capacitance of 1.0 μF to 100 μF. When using an OS capacitor, a tantalum
capacitor or an aluminum electrolytic capacitor, the capacitance also must be 1.0 μF to 100 μF. However, an oscillation
may occur depending on the equivalent series resistance (ESR).
Moreover, the S-19212BxxA Series requires CIN between the VIN pin and the VSS pin for a stable operation.
Generally, an oscillaiton may occur when a voltage regulator is used under the conditon that the impedance of the
power supply is high.
Note that the output voltage transient characteristics varies depending on the capacitance of CIN and CL and the value
of ESR.
Caution Perform thorough evaluation including the temperature characteristics with an actual application to
select CIN and CL.
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
S-19212BxxA Series Rev.4.0_00
12
Explanation of Terms
1. Low dropout voltage regulator
This is a voltage regulator which made dropout voltage small by its built-in low on-resistance output transistor.
2. Output voltage (VOUT)
This voltage is output at an accuracy of ±2.0% when the input voltage, the output current and the temperature are
in a certain condition*1.
*1. Differs depending on the product.
Caution If the certain condition is not satisfied, the output voltage may exceed the accuracy range of ±2.0%.
Refer to " Electrical Characteristics" and " Characteristics (Typical Data)" for details.
3. Line regulation
ΔVOUT1
ΔVIN VOUT
Indicates the dependency of the output voltage against the input voltage. That is, the value shows how much the
output voltage changes due to a change in the input voltage after fixing output current constant.
4. Load regulation (ΔVOUT2)
Indicates the dependency of the output voltage against the output current. That is, the value shows how much the
output voltage changes due to a change in the output current after fixing input voltage constant.
5. Dropout voltage (Vdrop)
Indicates the difference between input voltage (VIN1) and the output voltage when the output voltage becomes 98%
of the output voltage value (VOUT3) at VIN = VOUT(S) + 2.0 V after the input voltage (VIN) is decreased gradually.
Vdrop = VIN1 (VOUT3 × 0.98)
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.4.0_00 S-19212BxxA Series
13
Operation
1. Basic operation
Figure 14 shows the block diagram of the S-19212BxxA Series to describe the basic operation.
The error amplifier compares the feedback voltage (Vfb) whose output voltage (VOUT) is divided by the feedback
resistors (Rs and Rf) with the reference voltage (Vref). The error amplifier controls the output transistor,
consequently, the regulator starts the operation that holds VOUT constant without the influence of the input voltage
(VIN).
VOUT
*1
VSS
VIN
R
s
R
f
Error amplifier
Current
supply
V
ref
V
fb
+
Reference voltage
circuit
*1. Parasitic diode
Figure 14
2. Output transistor
In the S-19212BxxA Series, a low on-resistance P-channel MOS FET is used between the VIN pin and the VOUT
pin as the output transistor. In order to hold VOUT constant, the on-resistance of the output transistor varies
appropriately according to the output current (IOUT).
Caution Since a parasitic diode exists between the VIN pin and the VOUT pin due to the structure of the
transistor, the IC may be damaged by a reverse current if VOUT becomes higher than VIN.
Therefore, be sure that VOUT does not exceed VIN + 0.3 V.
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
S-19212BxxA Series Rev.4.0_00
14
3. ON / OFF pin
The ON / OFF pin controls the internal circuit and the output transistor in order to start and stop the regulator. When
the ON / OFF pin is set to OFF, the internal circuit stops operating and the output transistor between the VIN pin
and the VOUT pin is turned off, reducing current consumption significantly.
The internal equivalent circuit related to the ON / OFF pin is configured as shown in Figure 15. Since the ON / OFF
pin is neither pulled down nor pulled up, do not use it in the floating status. When not using the ON / OFF pin,
connect it to the VIN pin. Note that the current consumption increases when a voltage of 0.25 V to VIN0.3 V is
applied to the ON / OFF pin.
Table 11
Product Type ON / OFF Pin Internal Circuit VOUT Pin Voltage Current Consumption
B "H": ON Operate Constant value*1 ISS1
B "L": OFF Stop Pulled down to VSS*2 ISS2
*1. The constant value is output due to the regulating based on the set output voltage value.
*2. The VOUT pin voltage is pulled down to VSS due to the discharge shunt circuit (RLOW = 70 kΩ typ.), the
feedback resistors (Rs and Rf) and a load.
VSS
ON / OFF
VIN
Figure 15
4. Overcurrent protection circuit
The S-19212BxxA Series has a built-in overcurrent protection circuit to limit the overcurrent of the output transistor.
When the VOUT pin is shorted with the VSS pin, that is, at the time of the output short-circuit, the output current is
limited to 120 mA typ. due to the overcurrent protection circuit operation. The S-19212BxxA Series restarts
regulating when the output transistor is released from the overcurrent status.
Caution 1. This overcurrent protection circuit does not work as for thermal protection. For example, when
the output transistor keeps the overcurrent status long at the time of output short-circuit or
due to other reasons, pay attention to the conditions of the input voltage and the load current
so as not to exceed the power dissipation.
2. Note that any interference may be caused in the output voltage start-up when a load heavier
than
VOUT(S)
100 mA is connected.
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.4.0_00 S-19212BxxA Series
15
5. Thermal shutdown circuit
The S-19212BxxA Series has a built-in thermal shutdown circuit to limit overheating. When the junction temperature
increases to 165°C typ., the thermal shutdown circuit becomes the detection status, and the regulating is stopped.
When the junction temperature decreases to 140°C typ., the thermal shutdown circuit becomes the release status,
and the regulator is restarted.
If the thermal shutdown circuit becomes the detection status due to self-heating, the regulating is stopped and VOUT
decreases. For this reason, the self-heating is limited and the temperature of the IC decreases. The thermal
shutdown circuit becomes release status when the temperature of the IC decreases, and the regulating is restarted,
thus the self-heating is generated again. Repeating this procedure makes the waveform of VOUT into a pulse-like
form. This phenomenon continues unless decreasing either or both of the input voltage and the output current in
order to reduce the internal power consumption, or decreasing the ambient temperature. Note that the product may
suffer physical damage such as deterioration if the above phenomenon occurs continuously.
Caution 1. When the heat radiation of the application is not in a good condition, the self-heating cannot be
limited immediately, and the IC may suffer physical damage. Perform thorough evaluation
including the temperature characteristics with an actual application to confirm no problems
happen.
2. If a large load current flows during the restart process of regulating after the thermal shutdown
circuit changes to the release status from the detection status, the thermal shutdown circuit
becomes the detection status again due to self-heating, and a problem may happen in the
restart of regulating. A large load current, for example, occurs when charging to the CL whose
capacitance is large.
Perform thorough evaluation including the temperature characteristics with an actual
application to select CL.
Table 12
Thermal Shutdown Circuit VOUT Pin Voltage
Release: 140°C typ.*1 Constant value*2
Detection: 165°C typ.*1 Pulled down to VSS*3
*1. Junction temperature
*2. The constant value is output due to the regulating based on the set output voltage value.
*3. The VOUT pin voltage is pulled down to VSS due to the feedback resistors (Rs and Rf) and a load.
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
S-19212BxxA Series Rev.4.0_00
16
Precautions
Generally, when a voltage regulator is used under the condition that the load current value is small (0.1 mA or less),
the output voltage may increase due to the leakage current of an output transistor.
Generally, when a voltage regulator is used under the condition that the temperature is high, the output voltage may
increase due to the leakage current of an output transistor.
Generally, when the ON / OFF pin is used under the condition of OFF, the output voltage may increase due to the
leakage current of an output transistor.
Generally, when a voltage regulator is used under the condition that the impedance of the power supply is high, an
oscillation may occur. Perform thorough evaluation including the temperature characteristics with an actual
application to select CIN.
Generally, in a voltage regulator, an oscillation may occur depending on the selection of the external parts. The
following use conditions are recommended in the S-19212BxxA Series, however, perform thorough evaluation
including the temperature characteristics with an actual application to select CIN and CL.
Input capacitor (CIN): A ceramic capacitor with capacitance of 1.0 μF or more is recommended.
Output capacitor (CL): A ceramic capacitor with capacitance of 1.0 μF to 100 μF is recommended.
Generally, in a voltage regulator, the values of an overshoot and an undershoot in the output voltage vary
depending on the variation factors of input voltage start-up, input voltage fluctuation and load fluctuation etc., or the
capacitance of CIN or CL and the value of the equivalent series resistance (ESR), which may cause a problem to the
stable operation. Perform thorough evaluation including the temperature characteristics with an actual application to
select CIN and CL.
Generally, in a voltage regulator, an overshoot may occur in the output voltage momentarily if the input voltage
steeply changes when the input voltage is started up or the input voltage fluctuates etc. Perform thorough evaluation
including the temperature characteristics with an actual application to confirm no problems happen.
Generally, in a voltage regulator, if the VOUT pin is steeply shorted with GND, a negative voltage exceeding the
absolute maximum ratings may occur in the VOUT pin due to resonance phenomenon of the inductance and the
capacitance including CL on the application. The resonance phenomenon is expected to be weakened by inserting a
series resistor into the resonance path, and the negative voltage is expected to be limited by inserting a protection
diode between the VOUT pin and the VSS pin.
If the input voltage is started up steeply under the condition that the capacitance of CL is large, the thermal
shutdown circuit may be in the detection status by self-heating due to the charge current to CL.
Make sure of the conditions for the input voltage, output voltage and the load current so that the internal loss does
not exceed the power dissipation.
Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic
protection circuit.
When considering the output current value that the IC is able to output, make sure of the output current value
specified in Table 10 in " Electrical Characteristics" and footnote *4 of the table.
Wiring patterns on the application related to the VIN pin, the VOUT pin and the VSS pin should be designed so that
the impedance is low. When mounting CIN between the VIN pin and the VSS pin and CL between the VOUT pin and
the VSS pin, connect the capacitors as close as possible to the respective destination pins of the IC.
In the package equipped with heat sink of backside, mount the heat sink firmly. Since the heat radiation differs
according to the condition of the application, perform thorough evaluation with an actual application to confirm no
problems happen.
SII Semiconductor Corporation claims no responsibility for any disputes arising out of or in connection with any
infringement by products including this IC of patents owned by a third party.
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.4.0_00 S-19212BxxA Series
17
Characteristics (Typical Data)
1. Output voltage vs. Output current (When load current increases) (Ta = +25°C)
1. 1 VOUT = 2.5 V 1. 2 VOUT = 5.0 V
100 200 300 400 500 600 700 8000
3.0
1.5
1.0
0.5
2.0
2.5
0.0
V
OUT
[V]
I
OUT
[mA]
V
IN
= 3.0 V
V
IN
= 4.5 V
V
IN
= 3.5 V
V
IN
= 9.0 V
100 200 300 400 500 600 700 8000
6.0
3.0
2.0
1.0
4.0
5.0
0.0
V
OUT
[V]
I
OUT
[mA]
V
IN
= 5.5 V
V
IN
= 7.0 V
V
IN
= 6.0 V
V
IN
= 9.0 V
Remark In determining the output current, attention should be paid to the following.
1. The minimum output current value and footnote *4 of Table 10 in " Electrical Characteristics"
2. Power dissipation
2. Output voltage vs. Input voltage (Ta = +25°C)
2. 1 VOUT = 2.5 V 2. 2 VOUT = 5.0 V
6 12182430360
2.9
1.7
V
OUT
[V]
V
IN
[V]
2.3
1.9
2.5
2.1
2.7
I
OUT
= 0.1 mA
I
OUT
= 10 mA
I
OUT
= 40 mA
6 12182430360
5.4
4.2
V
OUT
[V]
V
IN
[V]
4.8
4.4
5.0
4.6
5.2
I
OUT
= 0.1 mA
I
OUT
= 10 mA
I
OUT
= 40 mA
2. 3 VOUT = 16.0 V
6 12182430360
16.4
15.2
V
OUT
[V]
V
IN
[V]
15.8
15.4
16.0
15.6
16.2
I
OUT
= 0.1 mA
I
OUT
= 10 mA
I
OUT
= 40 mA
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
S-19212BxxA Series Rev.4.0_00
18
3. Dropout voltage vs. Output current
3. 1 VOUT = 2.5 V 3. 2 VOUT = 5.0 V
50 100 150 200 2500
V
drop
[V]
I
OUT
[mA]
1.2
0.0
0.6
0.2
0.8
0.4
1.0
T
j
= +125C
T
j
= +150C
T
j
= +25C
T
j
= 40C
50 100 150 200 2500
V
drop
[V]
I
OUT
[mA]
1.2
0.0
0.6
0.2
0.8
0.4
1.0
T
j
= +125C
T
j
= +150C
T
j
= +25C
T
j
= 40C
3. 3 VOUT = 16.0 V
50 100 150 200 2500
Vdrop [V]
IOUT [mA]
1.2
0.0
0.6
0.2
0.8
0.4
1.0
Tj = +125C
Tj = +150C
Tj = +25C
Tj = 40C
4. Dropout voltage vs. Junction temperature
4. 1 VOUT = 2.5 V 4. 2 VOUT = 5.0 V
25 0 15012510075502540
0.0
0.6
V
drop
[V]
0.5
0.4
0.3
0.2
0.1
T
j
[C]
I
OUT
= 10 mA
I
OUT
= 125 mA
25 0 15012510075502540
0.0
0.6
Vdrop [V]
0.5
0.4
0.3
0.2
0.1
Tj [C]
IOUT = 10 mA
IOUT = 125 mA
4. 3 VOUT = 16.0 V
25 0 15012510075502540
0.0
0.6
V
drop
[V]
0.5
0.4
0.3
0.2
0.1
T
j
[C]
I
OUT
= 10 mA
I
OUT
= 125 mA
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.4.0_00 S-19212BxxA Series
19
5. Dropout voltage vs. Set output voltage (Ta = +25°C)
4.0 8.0 12.0 16.00.0
1.0
0.0
VOUT(S) [V]
0.8
0.6
0.4
0.2
Vdrop [V]
IOUT = 0.1 mA
IOUT = 10 mA
IOUT = 40 mA
IOUT = 125 mA IOUT = 250 mA
6. Output voltage vs. Junction temperature
6. 1 VOUT = 2.5 V
VIN = 4.5 V
6. 2 VOUT = 5.0 V
VIN = 7.0 V
25 0 15012510075502540
2.45
2.55
T
j
[C]
2.53
2.51
2.49
2.47
V
OUT
[V]
25 0 15012510075502540
4.90
5.10
T
j
[C]
5.06
5.02
4.98
4.94
V
OUT
[V]
6. 3 VOUT = 16.0 V
VIN = 18.0 V
25 0 15012510075502540
4.90
5.10
T
j
[C]
5.06
5.02
4.98
4.94
V
OUT
[V]
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
S-19212BxxA Series Rev.4.0_00
20
7. Current consumption during operation vs. Input voltage (When ON / OFF pin is ON, no load)
7. 1 VOUT = 2.5 V 7. 2 VOUT = 5.0 V
6 12182430360
50.0
0.0
I
SS1
[A]
V
IN
[V]
40.0
30.0
20.0
10.0
T
j
= 125C
T
j
= 150C
T
j
= 25C
T
j
= 40C
6 12182430360
50.0
0.0
ISS1 [A]
VIN
[V]
40.0
30.0
20.0
10.0
Tj = 125C
Tj = 150C
Tj = 25C
Tj = 40C
7. 3 VOUT = 16.0 V
6 12182430360
50.0
0.0
I
SS1
[A]
V
IN
[V]
40.0
30.0
20.0
10.0
T
j
= 125C
T
j
= 150C
T
j
= 25C
T
j
= 40C
8. Current consumption during operation vs. Junction temperature
8. 1 VOUT = 2.5 V
VIN = 18.0 V
8. 2 VOUT = 5.0 V
VIN = 18.0 V
25 50 75 100 125 1500
10.0
0.0
T
j
[C]
8.0
6.0
4.0
2.0
I
SS1
[A]
25 50 75 100 125 1500
10.0
0.0
Tj [C]
8.0
6.0
4.0
2.0
ISS1 [A]
8. 3 VOUT = 16.0 V
VIN = 18.0 V
25 50 75 100 125 1500
10.0
0.0
T
j
[C]
8.0
6.0
4.0
2.0
I
SS1
[A]
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.4.0_00 S-19212BxxA Series
21
9. Current consumption during operation vs. Output current (Ta = +25°C)
9. 1 VOUT = 2.5 V 9. 2 VOUT = 5.0 V
50 100 150 200 2500
50.0
0.0
40.0
30.0
20.0
10.0
I
SS1
[A]
I
OUT
[mA]
V
IN
= 13.5 V
V
IN
= 3.5 V
50 100 150 200 2500
50.0
0.0
40.0
30.0
20.0
10.0
I
SS1
[A]
I
OUT
[mA]
V
IN
= 13.5 V
V
IN
= 6.0 V
9. 3 VOUT = 16.0 V
50 100 150 200 2500
50.0
0.0
40.0
30.0
20.0
10.0
I
SS1
[A]
I
OUT
[mA]
V
IN
= 20.0 V
V
IN
= 17.0 V
10. Ripple rejection (Ta = +25°C)
10. 1 VOUT = 2.5 V
VIN = 4.5 V, CL = 1.0 μF
10. 2 VOUT = 5.0 V
VIN = 7.0 V, CL = 1.0 μF
Ripple Rejection [dB]
Frequency [Hz]
10 100
k
0
120
10k1k100
60
40
20
80
100
I
OUT
= 10 mA
I
OUT
= 250 mA
I
OUT
= 0.01 mA
Ripple Rejection [dB]
Frequency [Hz]
10 100
k
0
120
10k1k100
60
40
20
80
100
I
OUT
= 10 mA
I
OUT
= 250 mA
I
OUT
= 0.01 mA
10. 3 VOUT = 16.0 V
VIN = 18.0 V, CL = 1.0 μF
Ripple Rejection [dB]
Frequency [Hz]
10 100
k
0
120
10k1k100
60
40
20
80
100
I
OUT
= 10 mA
I
OUT
= 250 mA
I
OUT
= 0.01 mA
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
S-19212BxxA Series Rev.4.0_00
22
Reference Data
1. Characteristics of input transient response (Ta = +25°C)
1. 1 VOUT = 2.5 V
I
OUT
= 40 mA, C
IN
= 1.0
μ
F, V
IN
= 11.5 V
13.5 V, t
r
= t
f
= 5.0
μ
s
1. 2 VOUT = 5.0 V
I
OUT
= 40 mA, C
IN
= 1.0
μ
F, V
IN
= 11.5 V
13.5 V, t
r
= t
f
= 5.0
μ
s
VOUT [V]
t [ms]
VIN [V]
3.3
2.3
15
5
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.80.4
3.1
2.9
2.7
2.5
13
11
9
7
CL = 10.0 F
VIN
VOUT
CL = 22.0 F
V
OUT
[V]
t [ms]
V
IN
[V]
5.8
4.8
15
5
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.80.4
5.6
5.4
5.2
5.0
13
11
9
7
CL = 10.0 F
VIN
VOUT
CL = 22.0 F
1. 3 VOUT = 16.0 V
I
OUT
= 40 mA, C
IN
= 1.0
μ
F, V
IN
= 18.0 V
19.5 V, t
r
= t
f
= 5.0
μ
s
VOUT [V]
t [ms]
VIN [V]
16.8
15.8
21
11
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.80.4
16.6
16.4
16.2
16.0
19
17
15
13
CL = 10.0 F
VIN
VOUT
CL = 22.0 F
2. Characteristics of load transient response (Ta = +25°C)
2. 1 VOUT = 2.5 V
VIN = 13.5 V, CIN = 1.0 μF, IOUT = 50 mA 100 mA
2. 2 VOUT = 5.0 V
VIN = 13.5 V, CIN = 1.0 μF, IOUT = 50 mA 100 mA
VOUT [V]
t [ms]
2.9
2.3
150
150
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.80.4
2.6
2.4
2.7
2.5
2.8
0
100
50
50
100
IOUT [mA]
CL = 10.0 F
IOUT
VOUT
CL = 22.0 F
VOUT [V]
t [ms]
5.4
4.8
150
150
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.80.4
5.1
4.9
5.2
5.0
5.3
0
100
50
50
100
IOUT [mA]
CL = 10.0 F
IOUT
VOUT
CL = 22.0 F
2. 3 VOUT = 16.0 V
VIN = 18.0 V, CIN = 1.0 μF, IOUT = 50 mA 100 mA
V
OUT
[V]
t [ms]
16.4
15.8
150
150
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.80.4
16.1
15.9
16.2
16.0
16.3
0
100
50
50
100
IOUT [mA]
C
L
= 10.0 F
I
OUT
V
OUT
C
L
= 22.0 F
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.4.0_00 S-19212BxxA Series
23
3. Transient response characteristics of ON / OFF pin (Ta = +25°C)
3. 1 VOUT = 2.5 V
VIN = 13.5 V, CL = 10.0 μF, CIN = 1.0 μF,
IOUT = 125 mA, VON / OFF = 0 V 13.5 V
3. 2 VOUT = 5.0 V
VIN = 13.5 V, CL = 10.0 μF, CIN = 1.0 μF,
IOUT = 125 mA, VON / OFF = 0 V 13.5 V
V
ON / OFF
[V]
t [ms]
6.0
0.0
9.0
3.0
12.0
15.0
3.0
6
0
6
12
12
18
18
0.0 0.50.5 1.5
1.0 2.0 2.5 3.0
V
OUT
[V]
V
OUT
V
ON / OFF
VON / OFF [V]
t [ms]
6.0
0.0
9.0
3.0
12.0
15.0
3.0
6
0
6
12
12
18
18
0.0 0.50.5 1.5
1.0 2.0 2.5 3.0
V
OUT
[V]
V
OUT
V
ON / OFF
4. Load transient response characteristics dependent on capacitance (Ta = +25°C)
4. 1 VOUT = 5.0 V
VIN = 13.5 V, CIN = 1.0 μF, IOUT = 50 mA 100 mA
VIN = 13.5 V, CIN = 1.0 μF, IOUT = 100 mA 50 mA
20 40 60 80 1000
0.20
Undershoot [V]
C
L
[F]
0.15
0.10
0.05
0.00
20 40 60 80 1000
0.20
Overshoot [V]
C
L
[F]
0.15
0.10
0.05
0.00
5. Input transient response characteristics dependent on capacitance (Ta = +25°C)
5. 1 VOUT = 5.0 V
VIN = 7.0 V 12.0 V, tr = 5.0 μs,
CIN = 1.0 μF, IOUT = 40 mA
VIN = 12.0 V 7.0 V, tr = 5.0 μs,
CIN = 1.0 μF, IOUT = 40 mA
20 40 60 80 1000
2.0
Overshoot [V]
C
L
[μF]
1.5
1.0
0.5
0.0
20 40 60 80 1000
2.0
Undershoot [V]
C
L
[μF]
1.5
1.0
0.5
0.0
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
S-19212BxxA Series Rev.4.0_00
24
6. Load dump characteristics (Ta = +25°C)
6. 1
VOUT
= 3.3 V
IOUT = 0.1 mA, VIN = 13.5 V
45.0 V, CIN = CL = 1.0 μF
4.3
3.1
0.1 0.9
VOUT [V]
0.40.30.20.10
4.1
3.9
3.7
3.5
3.3
t [s]
50
10
40
30
20
10
0
VIN [V]
0.5 0.6 0.7 0.8
VOUT
VIN
7. Example of equivalent series resistance vs. Output current characteristics (Ta = +25°C)
100
0.1 250
I
OUT
[mA]
R
ESR
[Ω]
C
IN
= C
L
= 1.0
μ
F
0
Stable
CIN
VIN
VSS
CL*1
RESR
S-19212BxxA
Series
VOUT
ON / OFF
*1. CL: TDK Corporation CGA5L3X8R1H105M (1.0 μF)
Figure 16 Figure 17
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.4.0_00 S-19212BxxA Series
25
Thermal Characteristics
1. TO-252-5S(A)
Tj = +150°C max.
0
5.0
4.0
3.0
2.0
1.0
0 10050 150
Board 5
4.31 W
Board 4
4.17 W
Board 3
3.29 W
Board 2
2.16 W
Board 1
1.39 W
Ambient temperature (Ta) [C]
Power dissipation (P
D
) [W]
Figure 18 Power Dissipation of Package (When Mounted on Board)
1. 1 Board 1
76.2 mm
114.3 mm
Figure 19
Table 13
Item Specification
Thermal resistance value
(θja) 90°C/W
Size 114.3 mm × 76.2 mm × t1.6 mm
Material FR-4
Number of copper foil layer 2
Copper foil layer
1 Land pattern and wiring for testing: t0.070 mm
2
3
4 74.2 mm × 74.2 mm × t0.070 mm
Thermal via
1. 2 Board 2
76.2 mm
114.3 mm
Figure 20
Table 14
Item Specification
Thermal resistance value
(θja) 58°C/W
Size 114.3 mm × 76.2 mm × t1.6 mm
Material FR-4
Number of copper foil layer 4
Copper foil layer
1 Land pattern and wiring for testing: t0.070 mm
2 74.2 mm × 74.2 mm × t0.035 mm
3 74.2 mm × 74.2 mm × t0.035 mm
4 74.2 mm × 74.2 mm × t0.070 mm
Thermal via
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
S-19212BxxA Series Rev.4.0_00
26
1. 3 Board 3
76.2 mm
114.3 mm
Figure 21
Table 15
Item Specification
Thermal resistance value
(θja) 38°C/W
Size 114.3 mm × 76.2 mm × t1.6 mm
Material FR-4
Number of copper foil layer 4
Copper foil layer
1 Land pattern and wiring for testing: t0.070 mm
2 74.2 mm × 74.2 mm × t0.035 mm
3 74.2 mm × 74.2 mm × t0.035 mm
4 74.2 mm × 74.2 mm × t0.070 mm
Thermal via Number: 4
Diameter: 0.3 mm
1. 4 Board 4
76.2 mm
114.3 mm
46 mm
46 mm
Pattern for heat radiation
Figure 22
Table 16
Item Specification
Thermal resistance value
(θja) 30°C/W
Size 114.3 mm × 76.2 mm × t1.6 mm
Material FR-4
Number of copper foil layer 4
Copper foil layer
1 Pattern for heat radiation:
46 mm × 46 mm × t0.070 mm
2 74.2 mm × 74.2 mm × t0.035 mm
3 74.2 mm × 74.2 mm × t0.035 mm
4 74.2 mm × 74.2 mm × t0.070 mm
Thermal via
1. 5 Board 5
76.2 mm
46 mm
114.3 mm
46 mm
Figure 23
Table 17
Item Specification
Thermal resistance value
(θja) 29°C/W
Size 114.3 mm × 76.2 mm × t1.6 mm
Material FR-4
Number of copper foil layer 4
Copper foil layer
1 Pattern for heat radiation:
46 mm × 46 mm × t0.070 mm
2 74.2 mm × 74.2 mm × t0.035 mm
3 74.2 mm × 74.2 mm × t0.035 mm
4 74.2 mm × 74.2 mm × t0.070 mm
Thermal via Number: 4
Diameter: 0.3 mm
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.4.0_00 S-19212BxxA Series
27
2. HSOP-8A
0
5.0
4.0
3.0
2.0
1.0
0 10050 150
Board 5
3.57 W
Board 3
2.98 W
Board 4
2.91 W
Board 2
1.52 W
Board 1
1.09 W
Ambient temperature (Ta) [C]
Power dissipation (P
D
) [W]
T
j
= 150C max.
Figure 24 Power Dissipation of Package (When Mounted on Board)
2. 1 Board 1
76.2 mm
114.3 mm
Figure 25
Table 18
Item Specification
Thermal resistance value
(θja) 115°C/W
Size 114.3 mm × 76.2 mm × t1.6 mm
Material FR-4
Number of copper foil layer 2
Copper foil layer
1 Land pattern and wiring for testing: t0.070 mm
2
3
4 74.2 mm × 74.2 mm × t0.070 mm
Thermal via
2. 2 Board 2
76.2 mm
114.3 mm
Figure 26
Table 19
Item Specification
Thermal resistance value
(θja) 82°C/W
Size 114.3 mm × 76.2 mm × t1.6 mm
Material FR-4
Number of copper foil layer 4
Copper foil layer
1 Land pattern and wiring for testing: t0.070 mm
2 74.2 mm × 74.2 mm × t0.035 mm
3 74.2 mm × 74.2 mm × t0.035 mm
4 74.2 mm × 74.2 mm × t0.070 mm
Thermal via
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
S-19212BxxA Series Rev.4.0_00
28
2. 3 Board 3
76.2 mm
114.3 mm
Figure 27
Table 20
Item Specification
Thermal resistance value
(θja) 42°C/W
Size 114.3 mm × 76.2 mm × t1.6 mm
Material FR-4
Number of copper foil layer 4
Copper foil layer
1 Land pattern and wiring for testing: t0.070 mm
2 74.2 mm × 74.2 mm × t0.035 mm
3 74.2 mm × 74.2 mm × t0.035 mm
4 74.2 mm × 74.2 mm × t0.070 mm
Thermal via Number: 4
Diameter: 0.3 mm
2. 4 Board 4
76.2 mm
45 mm
114.3 mm
50 mm
Pattern for heat radiation
Figure 28
Table 21
Item Specification
Thermal resistance value
(θja) 43°C/W
Size 114.3 mm × 76.2 mm × t1.6 mm
Material FR-4
Number of copper foil layer 4
Copper foil layer
1 Pattern for heat radiation:
45 mm × 50 mm × t0.070 mm
2 74.2 mm × 74.2 mm × t0.035 mm
3 74.2 mm × 74.2 mm × t0.035 mm
4 74.2 mm × 74.2 mm × t0.070 mm
Thermal via
2. 5 Board 5
76.2 mm
45 mm
114.3 mm
50 mm
Figure 29
Table 22
Item Specification
Thermal resistance value
(θja) 35°C/W
Size 114.3 mm × 76.2 mm × t1.6 mm
Material FR-4
Number of copper foil layer 4
Copper foil layer
1 Pattern for heat radiation:
45 mm × 50 mm × t0.070 mm
2 74.2 mm × 74.2 mm × t0.035 mm
3 74.2 mm × 74.2 mm × t0.035 mm
4 74.2 mm × 74.2 mm × t0.070 mm
Thermal via Number: 4
Diameter: 0.3 mm
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.4.0_00 S-19212BxxA Series
29
3. HSOP-6
0
3.0
2.5
2.0
1.5
1.0
0.5
0 10050 150
Board 4
2.60 W
Board 3
2.45 W
Board 2
1.52 W
Board 1
1.18 W
Ambient temperature (Ta) [C]
Power dissipation (P
D
) [W]
T
j
= 150C max.
Figure 30 Power Dissipation of Package (When Mounted on Board)
3. 1 Board 1
76.2 mm
114.3 mm
Figure 31
Table 23
Item Specification
Thermal resistance value
(θja) 106°C/W
Size 114.3 mm × 76.2 mm × t1.6 mm
Material FR-4
Number of copper foil layer 2
Copper foil layer
1 Land pattern and wiring for testing: t0.070 mm
2
3
4 74.2 mm × 74.2 mm × t0.070 mm
Thermal via
3. 2 Board 2
76.2 mm
114.3 mm
Figure 32
Table 24
Item Specification
Thermal resistance value
(θja) 82°C/W
Size 114.3 mm × 76.2 mm × t1.6 mm
Material FR-4
Number of copper foil layer 4
Copper foil layer
1 Land pattern and wiring for testing: t0.070 mm
2 74.2 mm × 74.2 mm × t0.035 mm
3 74.2 mm × 74.2 mm × t0.035 mm
4 74.2 mm × 74.2 mm × t0.070 mm
Thermal via
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
S-19212BxxA Series Rev.4.0_00
30
3. 3 Board 3
76.2 mm
45 mm
114.3 mm
50 mm
Figure 33
Table 25
Item Specification
Thermal resistance value
(θja) 51°C/W
Size 114.3 mm × 76.2 mm × t1.6 mm
Material FR-4
Number of copper foil layer 4
Copper foil layer
1 Pattern for heat radiation:
45 mm × 50 mm × t0.070 mm
2 74.2 mm × 74.2 mm × t0.035 mm
3 74.2 mm × 74.2 mm × t0.035 mm
4 74.2 mm × 74.2 mm × t0.070 mm
Thermal via
3. 4 Board 4
76.2 mm
45 mm
114.3 mm
50 mm
Figure 34
Table 26
Item Specification
Thermal resistance value
(θja) 48°C/W
Size 114.3 mm × 76.2 mm × t1.6 mm
Material FR-4
Number of copper foil layer 4
Copper foil layer
1 Pattern for heat radiation:
45 mm × 50 mm × t0.070 mm
2 74.2 mm × 74.2 mm × t0.035 mm
3 74.2 mm × 74.2 mm × t0.035 mm
4 74.2 mm × 74.2 mm × t0.070 mm
Thermal via Number: 4
Diameter: 0.3 mm
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.4.0_00 S-19212BxxA Series
31
4. SOT-89-5
0
4.0
3.0
2.0
1.0
0 10050 150
Board 4
3.05 W
Board 3
2.36 W
Board 2
1.39 W
Board 1
1.02 W
Ambient temperature (Ta) [C]
Power dissipation (P
D
) [W]
T
j
= 150C max.
Figure 35 Power Dissipation of Package (When Mounted on Board)
4. 1 Board 1
76.2 mm
114.3 mm
Figure 36
Table 27
Item Specification
Thermal resistance value
(θja) 123°C/W
Size 114.3 mm × 76.2 mm × t1.6 mm
Material FR-4
Number of copper foil layer 2
Copper foil layer
1 Land pattern and wiring for testing: t0.070 mm
2
3
4 74.2 mm × 74.2 mm × t0.070 mm
Thermal via
4. 2 Board 2
76.2 mm
114.3 mm
Figure 37
Table 28
Item Specification
Thermal resistance value
(θja) 90°C/W
Size 114.3 mm × 76.2 mm × t1.6 mm
Material FR-4
Number of copper foil layer 4
Copper foil layer
1 Land pattern and wiring for testing: t0.070 mm
2 74.2 mm × 74.2 mm × t0.035 mm
3 74.2 mm × 74.2 mm × t0.035 mm
4 74.2 mm × 74.2 mm × t0.070 mm
Thermal via
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
S-19212BxxA Series Rev.4.0_00
32
4. 3 Board 3
76.2 mm
45 mm
114.3 mm
50 mm
Figure 38
Table 29
Item Specification
Thermal resistance value
(θja) 53°C/W
Size 114.3 mm × 76.2 mm × t1.6 mm
Material FR-4
Number of copper foil layer 4
Copper foil layer
1 Pattern for heat radiation:
45 mm × 50 mm × t0.070 mm
2 74.2 mm × 74.2 mm × t0.035 mm
3 74.2 mm × 74.2 mm × t0.035 mm
4 74.2 mm × 74.2 mm × t0.070 mm
Thermal via
4. 4 Board 4
76.2 mm
45 mm
114.3 mm
50 mm
Figure 39
Table 30
Item Specification
Thermal resistance value
(θja) 41°C/W
Size 114.3 mm × 76.2 mm × t1.6 mm
Material FR-4
Number of copper foil layer 4
Copper foil layer
1 Pattern for heat radiation:
45 mm × 50 mm × t0.070 mm
2 74.2 mm × 74.2 mm × t0.035 mm
3 74.2 mm × 74.2 mm × t0.035 mm
4 74.2 mm × 74.2 mm × t0.070 mm
Thermal via Number: 4
Diameter: 0.3 mm
FOR AUTOMOTIVE 125
°
C OPERATION
HIGH-WITHSTAND VOLTAGE LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.4.0_00 S-19212BxxA Series
33
5. SOT-23-5
0
1.0
0.8
0.6
0.4
0.2
0 10050 150
Ambient temperature (Ta) [C]
Power dissipation (P
D
) [W]
T
j
= 150C max.
Board 1
0.69 W
Board 2
0.87 W
Figure 40 Power Dissipation of Package (When Mounted on Board)
5. 1 Board 1*1
76.2 mm
114.3 mm
Figure 41
Table 31
Item Specification
Thermal resistance value
(θja) 180°C/W
Size 114.3 mm × 76.2 mm × t1.6 mm
Material FR-4
Number of copper foil layer 2
Copper foil layer
1 Land pattern and wiring for testing: t0.070 mm
2
3
4 74.2 mm × 74.2 mm × t0.070 mm
Thermal via
5. 2 Board 2*1
76.2 mm
114.3 mm
Figure 42
Table 32
Item Specification
Thermal resistance value
(θja) 143°C/W
Size 114.3 mm × 76.2 mm × t1.6 mm
Material FR-4
Number of copper foil layer 4
Copper foil layer
1 Land pattern and wiring for testing: t0.070 mm
2 74.2 mm × 74.2 mm × t0.035 mm
3 74.2 mm × 74.2 mm × t0.035 mm
4 74.2 mm × 74.2 mm × t0.070 mm
Thermal via
*1. The board is same in SOT-23-3, SOT-23-5 and SOT-23-6.
No.
TITLE
UNIT
SII Semiconductor Corporation
ANGLE
VA005-A-P-SD-2.0
TO-252-5S-A-PKG Dimensions
6.5±0.2
5.8
(5.2)
0.6±0.1
1.27
No. VA005-A-P-SD-2.0
mm
1.2±0.1
0.22±0.05
0.80
No.
TITLE
UNIT
SII Semiconductor Corporation
ANGLE
mm
51
ø1.7±0.1
ø1.5 0.2±0.05
1.5±0.1
8.0±0.1
6.9±0.1
2.0±0.05
Feed direction
4.0±0.1(10 pitches:40.0±0.2)
TO-252-5S-A-Carrier Tape
No. VA005-A-C-SD-1.0
VA005-A-C-SD-1.0
+0.1
-0.0
No.
TITLE
UNIT
SII Semiconductor Corporation
ANGLE
60°
2±0.5
ø13±0.2
ø21±0.8
Enlarged drawing in the central part
13.4±1.0
17.4±1.0
TO-252-5S-A-Reel
No. VA005-A-R-SD-1.0
VA005-A-R-SD-1.0
mm
QTY. 4,000
No.
TITLE
UNIT
SII Semiconductor Corporation
ANGLE
0.8
6.0
2.54
TO-252-5S-A
-Land Recommendation
VA005-A-L-SD-1.0
No. VA005-A-L-SD-1.0
1.27
mm
No. FH008-A-P-SD-2.0
No.
TITLE
UNIT mm
HSOP8A-A-PKG Dimensions
FH008-A-P-SD-2.0
0.4±0.05
1.27
5.02±0.2
14
85 14
85
3.0
SII Semiconductor Corporation
ANGLE
0.20±0.05
No.
TITLE
UNIT mm
5
8
1
4
ø2.0±0.05
ø1.5 0.3±0.05
2.1±0.1
8.0±0.1
6.7±0.1
2.0±0.05
Feed direction
4.0±0.1(10 pitches:40.0±0.2)
HSOP8A-A-Carrier Tape
No. FH008-A-C-SD-1.0
FH008-A-C-SD-1.0
+0.1
-0.0
SII Semiconductor Corporation
ANGLE
No.
TITLE
UNIT mm
QTY. 4,000
HSOP8A-A-Reel
No. FH008A-R-SD-1.0
FH008-A-R-SD-1.0
2±0.5
ø13±0.2
ø21±0.8
Enlarged drawing in the central part
17.4±1.0
13.4±1.0
SII Semiconductor Corporation
ANGLE
No.
TITLE
UNIT mm
HSOP8A-A
-Land Recommendation
FH008-A-L-SD-1.0
1.27
0.76
1.27 1.27
3.2
No. FH008-A-L-SD-1.0
SII Semiconductor Corporation
ANGLE
SII Semiconductor Corporation
No.
TITLE
ANGLE
UNIT
No. FH006-A-P-SD-2.1
mm
HSOP6-A-PKG Dimensions
FH006-A-P-SD-2.1
0.4±0.05
1.91
5.02±0.2
13
64
1.91
1.67±0.05
5
20.20±0.05
SII Semiconductor Corporation
No.
TITLE
ANGLE
UNIT mm
4
6
1
3
ø2.0±0.05
ø1.55±0.05 0.3±0.05
2.1±0.1
8.0±0.1
5°max.
6.7±0.1
2.0±0.05
Feed direction
4.0±0.1(10 pitches:40.0±0.2)
HSOP6-A-Carrier Tape
FH006-A-C-SD-1.0
No. FH006-A-C-SD-1.0
SII Semiconductor Corporation
No.
TITLE
ANGLE
UNIT mm
QTY. 4,000
2±0.5
13.5±0.5
60°
2±0.5
ø13±0.2
ø21±0.8
Enlarged drawing in the central part
HSOP6-A-Reel
No. FH006-A-R-S1-1.0
FH006-A-R-S1-1.0
SII Semiconductor Corporation
No.
TITLE
UNIT
ANGLE
1.5±0.1 1.5±0.1
1.6±0.2
4.5±0.1
132
1.5±0.1
0.4±0.05
0.4±0.1
0.45±0.1
0.4±0.1
54
SOT895-A-PKG Dimensions
No. UP005-A-P-SD-2.0
UP005-A-P-SD-2.0
45°
0.3
mm
SII Semiconductor Corporation
No.
TITLE
UNIT
ANGLE
2.0±0.1
0.3±0.05
8.0±0.1
ø1.5 +0.1
-0
2.0±0.05
ø1.5 +0.1
-0
4.75±0.1
5° max.
1
32
54
No. UP005-A-C-SD-1.1
UP005-A-C-SD-1.1
SOT895-A-Carrier Tape
Feed direction
4.0±0.1(10 pitches : 40.0±0.2)
mm
SII Semiconductor Corporation
No.
TITLE
UNIT
ANGLE
16.5max.
13.0±0.3
QTY. 1,000
(60°)
(60°)
No. UP005-A-R-SD-1.1
UP005-A-R-SD-1.1
SOT895-A-Reel
Enlarged drawing in the central part
mm
No.
TITLE
UNIT
SII Semiconductor Corporation
ANGLE
2.9±0.2
1.9±0.2
0.95±0.1
0.4±0.1
0.16 +0.1
-0.06
123
4
5
No. MP005-A-P-SD-1.3
MP005-A-P-SD-1.3
SOT235-A-PKG Dimensions
mm
No.
TITLE
UNIT
SII Semiconductor Corporation
ANGLE
ø1.5 +0.1
-0 2.0±0.05
ø1.0 +0.2
-0 4.0±0.1 1.4±0.2
0.25±0.1
3.2±0.2
123
45
No. MP005-A-C-SD-2.1
MP005-A-C-SD-2.1
SOT235-A-Carrier Tape
Feed direction
4.0±0.1(10 pitches:40.0±0.2)
mm
No.
TITLE
UNIT
SII Semiconductor Corporation
ANGLE
12.5max.
9.0±0.3
ø13±0.2
(60°) (60°)
QTY. 3,000
No. MP005-A-R-SD-1.1
MP005-A-R-SD-1.1
SOT235-A-Reel
Enlarged drawing in the central part
mm
Disclaimers (Handling Precautions)
1. All the information described herein (product data, specifications, figures, tables, programs, algorithms and
application circuit examples, etc.) is current as of publishing date of this document and is subject to change without
notice.
2. The circuit examples and the usages described herein are for reference only, and do not guarantee the success of
any specific mass-production design.
SII Semiconductor Corporation is not responsible for damages caused by the reasons other than the products or
infringement of third-party intellectual property rights and any other rights due to the use of the information described
herein.
3. SII Semiconductor Corporation is not responsible for damages caused by the incorrect information described herein.
4. Take care to use the products described herein within their specified ranges. Pay special attention to the absolute
maximum ratings, operation voltage range and electrical characteristics, etc.
SII Semiconductor Corporation is not responsible for damages caused by failures and/or accidents, etc. that occur
due to the use of products outside their specified ranges.
5. When using the products described herein, confirm their applications, and the laws and regulations of the region or
country where they are used and verify suitability, safety and other factors for the intended use.
6. When exporting the products described herein, comply with the Foreign Exchange and Foreign Trade Act and all
other export-related laws, and follow the required procedures.
7. The products described herein must not be used or provided (exported) for the purposes of the development of
weapons of mass destruction or military use. SII Semiconductor Corporation is not responsible for any provision
(export) to those whose purpose is to develop, manufacture, use or store nuclear, biological or chemical weapons,
missiles, or other military use.
8. The products described herein are not designed to be used as part of any device or equipment that may affect the
human body, human life, or assets (such as medical equipment, disaster prevention systems, security systems,
combustion control systems, infrastructure control systems, vehicle equipment, traffic systems, in-vehicle equipment,
aviation equipment, aerospace equipment, and nuclear-related equipment), excluding when specified for in-vehicle
use or other uses. Do not use those products without the prior written permission of SII Semiconductor Corporation.
Especially, the products described herein cannot be used for life support devices, devices implanted in the human
body and devices that directly affect human life, etc.
Prior consultation with our sales office is required when considering the above uses.
SII Semiconductor Corporation is not responsible for damages caused by unauthorized or unspecified use of our
products.
9. Semiconductor products may fail or malfunction with some probability.
The user of these products should therefore take responsibility to give thorough consideration to safety design
including redundancy, fire spread prevention measures, and malfunction prevention to prevent accidents causing
injury or death, fires and social damage, etc. that may ensue from the products' failure or malfunction.
The entire system must be sufficiently evaluated and applied on customer's own responsibility.
10. The products described herein are not designed to be radiation-proof. The necessary radiation measures should be
taken in the product design by the customer depending on the intended use.
11. The products described herein do not affect human health under normal use. However, they contain chemical
substances and heavy metals and should therefore not be put in the mouth. The fracture surfaces of wafers and chips
may be sharp. Take care when handling these with the bare hands to prevent injuries, etc.
12. When disposing of the products described herein, comply with the laws and ordinances of the country or region where
they are used.
13. The information described herein contains copyright information and know-how of SII Semiconductor Corporation.
The information described herein does not convey any license under any intellectual property rights or any other
rights belonging to SII Semiconductor Corporation or a third party. Reproduction or copying of the information
described herein for the purpose of disclosing it to a third-party without the express permission of SII Semiconductor
Corporation is strictly prohibited.
14. For more details on the information described herein, contact our sales office.
1.0-2016.01
www.sii-ic.com