DESCO INDUSTRIES INC TECHNICAL BULLETIN TB-7000 Reztore(R) Surface & Mat Cleaner Application Instructions Made in the United States of America Directions Smooth Surfaces: Apply Reztore(R) Surface & Mat Cleaner to the entire surface to be treated using either the pump or trigger spray bottle. Use a lint-free cloth to wipe the surface until dry. For set stains, let Reztore(R) Surface & Mat Cleaner soak on the surface for 30 seconds before wiping clean. Figure 1. Reztore(R) Surface & Mat Cleaner: 16 Ounces (500 mL) Spray Bottle 1 Quart (1 liter) Spray Bottle 2.5 Gallons (10 liters) Bag-in-Box Description Reztore(R) Surface & Mat Cleaner is a liquid cleaner used to remove dust, grease, grime, fingerprints, and solder flux from all surfaces used in a static sensitive area. Reztore(R) Surface & Mat Cleaner leaves no insulative residue, contains no alkali or ammonia, and according to NFPA and OSHA, is "non-flammable". General Guidelines Reztore(R) Surface & Mat Cleaner is a liquid cleaner which can be used on a variety of surfaces, especially surfaces used in a static sensitive environment. Surfaces include but are not limited to: rubber, vinyl and polyethylene table and floor mats, field service kits, laminated table tops, tote boxes, epoxy, painted surfaces, plexiglass, glass, metal, 3-ring binders, computer screens, computer keyboards, shelving, push carts, conveyor belts, etc. Figure 2. Applying Reztore(R) to the mat Other Surfaces - Keyboards: Dampen a lint-free cloth or a lint-free swab with Reztore(R) Surface & Mat Cleaner. Wipe surface to be cleaned using either the cloth or swab. The swab will work best for tight spots like between keyboard keys. Use the cloth to wipe clean the remaining surfaces of the keyboard. NOTE: Cleaners with silicone leave an insulative residue on surfaces and solvents such as 2-Butoxyethanol or Ethanolamine used in cleaners can dry out the material; both can prevent conductive or dissipative mats from functioning properly. "Periodic cleaning, following the manufacturer's recommendations, is required to maintain proper electrical function on all work surfaces. Ensure that cleaners that are used do not leave an electrically insulative residue common with some household cleaners that contain silicone." (ESD Handbook ESD TR20.20 section 5.3.1.14 Worksurface Maintenance) "Only cleaning materials or processes which do not degrade the properties of the ESD protective items, shall be used." (EN 61340-5-1 clause 5.5 EPA working practices) Figure 3. Cleaning a keyboard or computer screen with Reztore(R) Surface & Mat Cleaner On non-ESD surfaces, we recommend using Reztore(R) Topical Antistat static dissipative coating. While coating is on the surface it will enhance existing ESD surfaces and will give dissipative electrical properties to insulative surfaces. DESCO INDUSTRIES INC - 3651 Walnut Avenue, Chino, CA 91710 * (909) 627-8178 * Website: DescoIndustries.com TB-7000 Page 1 of 9 June 2018 (c) 2018 DESCO INDUSTRIES INC Employee Owned Specifications Appearance of Solution Transparent violet pH 6.0 - 8.0 Odor Slight floral Solubility Water, acetone, alcohols Toxicity, Irritation, Sensitivity Non-toxic by dermal contact, or inhalation Flammability "Non-flammable" per NFPA and OSHA. Flammable Cat. 3 per CLP Ion Level (mg/L) Fluoride 0.3 Sulfate <0.5 Nitrate 1.2 Bromide <0.5 Phosphate <0.5 7 1 x 10 to < 1 x 109 ohms (ref. ANSI/ESD S4.1) Electrical Properties (Dry Film) Static Decay Rate <0.01 seconds (per FTMS 101C Method 4046) Testing It is recommended to test the surface after cleaning to ensure that all insulative contaminants such as dirt and grime have been removed. Reztore(R) Surface & Mat Cleaner will only leave behind a coating with a surface resistance of less than 1 x 109 ohms. RoHS , REACH, and Conflict Minerals Statement See the Desco Industries RoHS , REACH, and Conflict Minerals Statement: DescoIndustries.com/ROHS.aspx Desco Industries Limited Warranty See the Desco Industries Limited Warranty: DescoIndustries.com/Warranty.aspx Reztore(R) Surface and Mat Cleaner is available from these Desco Industries brands: for service and support in North America 16 Oz. 10439 1 Quart 10435 2.5 Gallons 10438 for service and support in United Kingdom and Europe 1 Litre 229021 1 Litre 12 Packs 229022 10 Litres 229023 for service and support in Asia Storage Reztore(R) Surface & Mat Cleaner product does not have a set life span. The chemicals are not known to degrade over time when stored at the proper temperature conditions as stated in the Safety Data Sheet. We also recommend that this product be stored in its original container and be sealed when not in use. 0.5 Liter 10439 1 Liter 10435 10 Liters 10438 DESCO INDUSTRIES INC - 3651 Walnut Avenue, Chino, CA 91710 * (909) 627-8178 * Website: DescoIndustries.com TB-7000 Page 2 of 9 (c) 2018 DESCO INDUSTRIES INC Employee Owned SAFETY DATA SHEET May be used to comply with OSHA Hazcom 29 CFR 1910.1200, Reg. (EU) No.453/2010 and Japan JIS 7253-2012). Standards must be consulted for specific requirements. Revision Date: 2018-06-26 SECTION 1 -- IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifiers Product Name:Reztore(R) Surface and Mat Cleaner EC No.:None REACH Registration No.: None CAS No.:None 1.2 Relevant identified uses of the substance or mixture and uses advised against Identified use: Cleaner, ESD Surface & Mat 1.3 Details of the supplier of the safety data sheet Supplier: DESCO INDUSTRIES INC United States One Colgate Way Canton, MA 02021 +1 781-821-8370 Email Address: 1.4 Emergency telephone number United States: United Kingdom: Japan: Office hours: 8:00 AM - 5:00 PM United Kingdom 2A Dunhams Lane Letchworth Garden City Hertfordshire, SG6 1BE +44 (0) 1462 672005 Service@DescoIndustries.com Japan 661-1 Yachimata-ho Yachimata-Shi Chiba-Ken 289-1115 +81 43-309-4470 +1 781-821-8370 +44 (0) 1462 672005 +81 43-309-4470 SECTION 2 -- HAZARDS IDENTIFICATION 2.1 Classification of substance or mixture Classification according to OSHA Hazcom 29 CFR 1910.1200, Regulation (EC) No 1272/2008, JIS 7252-2014 Flammable liquid Category 3 Eye irritation Category 2 Specific target organ toxicity (Single exposure) Category 3 2.2 Label elements Labelling according to OSHA Hazcom 29 CFR 1910.1200, Regulation (EC) No 1272/2008, JIS 7252-2014 Hazard pictograms/Symbols: Signal word: Warning Hazardous statements: H226 Flammable liquid and vapor H319 Causes serious eye irritation H336 May cause drowsiness or dizziness Precautionary statements: Prevention P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P241 Use explosion-proof electrical/vetilating/lighting equipment. DESCO INDUSTRIES INC - 3651 Walnut Avenue, Chino, CA 91710 * (909) 627-8178 * Website: DescoIndustries.com TB-7000 Page 3 of 9 (c) 2018 DESCO INDUSTRIES INC Employee Owned Response P303 + P361 + P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. P304 + P340 + P312 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell. P305 + P351 + P338 + P337 + P313 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. 2.3 Other hazards N/A SECTION 3 -- COMPOSITION/INFORMATION ON INGREDIENTS 3.2 Mixture Components CAS No. %wt. Classification Isopropanol 67-63-0 5 - 25 % OSHA 29CFR 1910.1200: Flammable liquids - Category 2 Eye Irritation - Category 2A STOT - Category 3 Reg. (EC) No. 1272/2008: Flammable liquids - Category 2 Eye Irritation - Category 2 STOT - Category 3 JIS 7252-2014 Flammable liquids - Category 2 Eye Irritation - Category 2 Reproductive toxicity - Category 2 STOT SE - Category 1,3 STOT RE - Category 1,2 SECTION 4 -- FIRST AID MEASURES 4.1 Description of first aid measures Eye Contact Flush with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Skin Contact Wash with soap and water. If skin irritation occurs: Get medical advice/ attention. Ingestion Drink several glasses of water. DO NOT induce vomiting. Contact a physician. Inhalation Move subject to fresh air. 4.2 Most important symptoms and effects, both acute and delayed None known 4.3 Indication of any immediate medical attention and special treatment needed Treat symptomatically SECTION 5 -- FIRE FIGHTING MEASURES 5.1 Extinguishing media Suitable Extinguishing Media Use an extinguishing agent suitable for the surrounding fire Unsuitable Extinguishing Methods N/A 5.2 Special hazards arising from the substance or mixture Hazards from the substance or mixture: Unknown Hazardous thermal decomposition products: Unknown DESCO INDUSTRIES INC - 3651 Walnut Avenue, Chino, CA 91710 * (909) 627-8178 * Website: DescoIndustries.com TB-7000 Page 4 of 9 (c) 2018 DESCO INDUSTRIES INC Employee Owned 5.3 Advice for firefighter Special protective actions for fire-fighters: Cool endangered receptacles with water spray. Remove containers from path of fire when safe to do so. Do not approach containers suspected to be hot. Special protective equipment for fire fighters: Wear self-contained breathing apparatus and protective suit. SECTION 6 -- ACCIDENTAL RELEASE MEASURES 6.1 Personal precautions, protective equipment and emergency procedures Wearing protective clothing. Inhalation protection. Extinguish all ignition sources. 6.2 Environmental precautions Biodegradable 6.3 Methods and materials for containment and cleaning up Contain and collect material into plastic container. Water rinse and drain, flush small amounts. Use sanitary landfill disposal. Follow national and local regulations (RCRA; Subtitle D). If Material is Released/Spilled: Keep spectators away. Contain spill with inert material (e.g. sand, earth). Keep spills and cleaning runoffs out of municipal sewers and open bodies of water. 6.4 Reference See SECTION See SECTION See SECTION to other sections 1, Emergency contact information. 8, Information on appropriate personal protective equipment. 13, Disposal Considerations, for information regarding the disposal of contained spills. SECTION 7 -- HANDLING AND STORAGE 7.1 Precautions for safe handling Use in well-ventilated areas; avoid breathing vapors. Keep containers closed when not in use. Avoid from freezing. 7.2 Conditions for safe storage, including any incompatibilities Store in a cool, dry place with adequate ventilation. Keep from freezing - product may coagulate. Storage temperature: Max. 49C/120F 1C/34F 7.3 Specific end uses N/A SECTION 8 -- EXPOSURE CONTROL / PERSONAL PROTECTION 8.1 Control parameters If exposure limits exist, they are listed below. If no exposure limits are displayed, then no values are applicable. Component Regulation Type of listing Value/Notation Isopropanol CAS No.: 67-63-0 EU ACGIH EU ACGIH US OSHA Z-1 TWA STEL TWA 200 ppm 400 ppm 980 mg/m3 400 ppm 8.2 Exposure controls Technical Control Measures Preferences of technical measure to prevent or control contact with the product. Isolating process and personnel, mechanical ventilation (dilution and local exhaust) and the regulation of process conditions. In case of non-prevention or non-control, a proper protective wearing should be used. Hygiene Measures Wash hands before eating, smoking, or using washroom facilities Individual protection measures Eye/Face Protection Avoid contact with eyes. Use safety eye wear with splash guards or side shields (ANSI Z-87.1). For EU: Safety glasses (with side shields) should be consistent with EN 166 or equivalent. Skin Protection No precautions other than clean body covering clothing should be needed. DESCO INDUSTRIES INC - 3651 Walnut Avenue, Chino, CA 91710 * (909) 627-8178 * Website: DescoIndustries.com TB-7000 Page 5 of 9 (c) 2018 DESCO INDUSTRIES INC Employee Owned Hand Protection Chemical protective gloves is not needed when handling this material. Consistent with general hygienic practice for any material, skin contact should be minimized. In case of using gloves, use gloves chemically resistant to this material. Examples of preferred glove barrier materials include: Neoprene. Nitrile/butadiene rubber ("nitrile" or "NBR"). Polyvinyl chloride ("PVC" or "vinyl"). Avoid gloves made of: Polyvinyl alcohol ("PVA"). For EU: In case of using gloves, use chemical resistant gloves classified according to standard SS-EN 374: Protective gloves against chemical and microorganisms. In case of prolonged contact or repeated contact, it is recommended gloves with protection index grade 4 or higher (breakthrough time longer than 120 minutes according to standard SS-EN 374). When only short-term contact is expected, it is recommended gloves with protective index class 1 or higher (breakthrough time longer than 10 minutes according to standard SS-EN 374). Respiratory Protection For most conditions no respiratory protection should be needed; however, if discomfort is experienced, use an approved air-purifying respirator. Respiratory protection should be worn when there is a potential to exceed the exposure limit requirements or guidelines. In the case of vapor formation use a respirator with an approved filter. If there are no applicable exposure limit requirements or guidelines, wear respiratory protection when adverse effects, such as respiratory irritation or discomfort have been experienced, or where indicated by your risk assessment process. For EU: Use the following CE-approved filters: Filters against organic gases with prefilter to particles, type AP2. Ingestion Use good personal hygiene. Do not consume or store food in the work area. Wash hands before smoking or eating. SECTION 9 -- PHYSICAL AND CHEMICAL PROPERTIES 9.1 Information on basic physical and chemical properties Appearance:Liquid Color:Clear violet Odor:Floral Alcohol Odor Threshold: No data available pH:6.0 - 8.0 Melting Point:No data available Boiling Point:>200F (93.3C) Flash Point:106F (41C) Evaporation rate:0.28 Flammability:Flammable Upper flammability or explosive limits: No data available Lower flammability or explosive limits: No data available Vapor Pressure (mm Hg): 18.0 Vapor Density (air=1): 1.06 Relative Density: 8.17 lbs./gal at 20C Specific Gravity (H2O = 1) : 0.98 Solubility:Completely Partition coefficient: No data available Auto-ignition temperature: No data available Decomposition temperature: No data available Viscosity:No data available Explosive properties: No data available Oxidizing properties: No data available 9.2 Other information VOC per Method 24 of EPA: 9.4% VOC by wt. DESCO INDUSTRIES INC - 3651 Walnut Avenue, Chino, CA 91710 * (909) 627-8178 * Website: DescoIndustries.com TB-7000 Page 6 of 9 (c) 2018 DESCO INDUSTRIES INC Employee Owned SECTION 10 -- STABILITY AND REACTIVITY 10.1 Reactivity N/A 10.2 Chemical stability Stable product at normal conditions. 10.3 Possibility of hazardous reactions N/A 10.4 Conditions to avoid Temperatures above 100F (38C) and below 34F (1C) 10.5 Incompatible materials Strong Oxidizers. 10.6 Hazardous decomposition products Thermal decomposition may yield carbon monoxide. SECTION 11 -- TOXICOLOGICAL INFORMATION 11.1 Information on toxicological effects Acute Effects Inhalation Slight irritation Eye Contact Slight irritation Skin Contact Slight irritation Ingestion N/A Acute Toxicity Isopropanol CAS No.: 67-63-0 Oral Toxicity Dermal Toxicity Inhalation Toxicity (Rat) (Rabbit) (Rat) LD50 = 5,045 mg/kg LD50 = 12,800 mg/kg LC50 = 37.5 mg/l (4 h) SECTION 12 -- ECOLOGICAL INFORMATION 12.1 Toxicity No data available 12.2 Persistence and degradability No data available 12.3 Bioaccumulative potential No data available 12.4 Mobility in soil The product is aqueous. 12.5 Results of PBT and vPvB assessment No data available 12.6 Other adverse effects Product: Additional ecological information According to experience and to the information currently available, the product has no harmful effects on the environment if used correctly as intended. SECTION 13 -- DISPOSAL CONSIDERATIONS 13.1 Waste treatment methods Product: Contain and collect material into plastic container. Water rinse and drain, flush small amounts. Use sanitary landfill disposal. Follow state and local regulations (RCRA; Subtitle D). 13.2 Additional information N/A DESCO INDUSTRIES INC - 3651 Walnut Avenue, Chino, CA 91710 * (909) 627-8178 * Website: DescoIndustries.com TB-7000 Page 7 of 9 (c) 2018 DESCO INDUSTRIES INC Employee Owned SECTION 14 -- TRANSPORT INFORMATION DOT (Department of Transportation) Not regulated for transport Classification for SEA transport (IMO-IMDG) Not regulated for transport Classification for AIR transport (IATA/ICAO) Not regulated for transport 14.1 UN Number None 14.2 UN proper shipping name None 14.3 Transport hazard class(es) None 14.4 Packing group None 14.5 Environmental hazards None 14.6 Special precautions for user None 14.7 Transport in bulk according to Annex II of MARPOL and the IBC Code Not applicable SECTION 15 -- REGULATORY INFORMATION 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture US Regulations: Superfund Amendment and Reauthorization Act of 1986 Title III (Emergency Planning and Community Right-to-Know Act of 1986) Section 302 No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302. Section 313 The following components are subject to reporting levels established by SARA Title III, Section 313: Isopropanol (CAS No.: 67-63-0) Right To Know Massachusetts RTK Pennsylvania RTK New Jersey RTK X X X Isopropanol CAS No.: 67-63-0 California Proposition 65 This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any otherreproductive harm. The components of this product are reported in the following inventories: EINECS Status All components of this product are listed or excluded from the EINECS Inventories TSCA All components of this product are listed or excluded from listing on United States Environmental Protection Agency Toxic Substances Control Act (TSCA) Inventory REACH This product does not required REACH registration according to Regulation (EC) 1272/2008 15.2 Chemical Safety Assessment N/A DESCO INDUSTRIES INC - 3651 Walnut Avenue, Chino, CA 91710 * (909) 627-8178 * Website: DescoIndustries.com TB-7000 Page 8 of 9 (c) 2018 DESCO INDUSTRIES INC Employee Owned SECTION 16 -- OTHER INFORMATION HMIS RATING Health 1, Flammability 2, Reactivity 0, Personal Protection B NFPA RATING Special Hazard: N/A, Health: 1, Flammability: 2, Instability: 0 SDS Updated 2018-06-26 Disclaimer OTHER INFORMATION: This information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any other process. Such information is to the best of the company's knowledge and believed accurate and reliable as of the date indicated. However, no representation, warranty or guarantee of any kind, express or implied, is made as to its accuracy, reliability or completeness and we assume no responsibility for any loss, damage or expense, direct or consequential, arising out of use. It is the user's responsibility to satisfy himself as to the suitableness and completeness of such information for his own particular use. DESCO INDUSTRIES INC - 3651 Walnut Avenue, Chino, CA 91710 * (909) 627-8178 * Website: DescoIndustries.com TB-7000 Page 9 of 9 (c) 2018 DESCO INDUSTRIES INC Employee Owned Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Desco: 10435 10438 10439