STEP
3
LFSTBBAT9 Quick Start Guide
SENSOR TOOLBOX
Accelerometer Power Board
Unpack the board.
Verify package contents
according to the kit Web site:
www.freescale.com/
sensortoolbox
Connect the 9V battery (not included) to the
battery connector. Assemble the hardware
by connecting the development board to the
battery board. This board is intended for use
paired with the accelerometer development
board, purchased separately. More
information can be found on the Web site.
At www.freescale.com/
sensortoolbox download
the latest software version by
clicking the link.
All Sensor Toolbox kits use the same
software and driver, so the install only needs
to be done once. Follow the on-screen
instructions to install the communication
driver for the tool. Check back occasionally
for software updates.
Follow this sequence to
collect data:
1. Plug in the LFBEBxxxx accelerometer board
into the LFSTBBAT9 battery board.
2. Turn on the LFSTBBAT9 battery board.
3. Press the start switch on the back of the
LFBEBxxxx board to enter the data
logging mode.
4. Press the start switch again to start
data logging.
5. Turn off the LFSTBBAT9 battery board to
stop data logging.
Explore other compatible kits at
www.freescale.com/sensortoolbox
STEP
1
STEP
2
Get to know the LFSTBBAT9 board
Accelerometer Power Board
SENSOR TOOLBOX
Freescale and the Freescale logo are trademarks or registered
trademarks of Freescale Semiconductor, Inc. in the U.S. and other
countries. All other product or service names are the property of
their respective owners. © Freescale Semiconductor, Inc. 2009.
Doc Number: LFSTBBAT9ACQSGP2 / Rev 0
Agile Number: 926-78348 / Rev A
Learn more at www.freescale.com/sensortoolbox.
