Crimp-Validation product: DELPHI PN 15409041 material: surface: material thickness: CUFE2P F.SN3 0,32 mm cross section [mm]: 0,5 + 1,0 | 0,75 + 0,75 | 0,75 + 1,0 | 0,5 + 1,5 1,0 + 1,0 | 0,75 + 1,5 strip length: 4,30 mm cable type: insulation o [mm]: FLRY-B seal: conductor dimension crimp dimension [mm] cable arr. cable type cross sect. [mm] struct. nxd [mm] tear-out core insulation force height width height width [N] 0,05 0,10 0,10 0,10 top FLRY-B 0,5 + 1,0 16 x 0,21 + 32 x 0,21 80 1,55 2,60 3,40 3,60 top FLRY-B 0,75 + 0,75 24 x 0,21 + 24 x 0,21 120 1,55 2,60 3,30 3,60 top FLRY-B 0,75 + 1,0 24 x 0,21 + 32 x 0,21 120 1,60 2,60 3,45 3,60 top FLRY-B 0,5 + 1,5 16 x 0,21 + 30 x 0,26 80 1,65 2,60 3,50 3,60 top FLRY-B 1,0 + 1,0 32 x 0,21 + 32 x 0,21 160 1,65 2,60 3,50 3,65 top FLRY-B 0,75 + 1,5 24 x 0,21 + 30 x 0,26 120 1,70 2,60 3,70 3,65 core: C-2.50-3.5-19 DPN 10713724 insulation: IO-3.50-2.0-12 DPN 10713880 anvil: AS-025 DPN 10714389 two piece anvil: AC-2.50-3.75-A DPN 10764010 AI-3.50-2.6-0.4 DPN 10769980 The tear-out force is validated for the small cable. Notice to cable arrangement: side: cables side by side top: one cable on top of the other n. d.: not defined Date: Date Rev.: 30.06.2009 09.09.2009 Rev.-No.: 01 Record-No. 14045 page 1 / 3 Approved by: DELPHI WUPPERTAL / PETP / NOLZEN Owner: DELPHI GERMANY Crimp-Validation DELPHI PN 15409041 cable: 0,50 mm + 1,00 mm = 16 x 0,21 mm + 32 x 0,21 mm crimp height: 1,55 mm crimp width: 2,60 mm cable: 0,75 mm + 0,75 mm = 24 x 0,21 mm + 24 x 0,21 mm crimp height: 1,55 mm crimp width: 2,60 mm cable: 0,75 mm + 1,00 mm = 24 x 0,21 mm + 32 x 0,21 mm crimp height: 1,60 mm crimp width: 2,60 mm Date: Date Rev.: 30.06.2009 09.09.2009 Rev.-No.: 01 Record-No. 14045 page 2 / 3 Approved by: DELPHI WUPPERTAL / PETP / NOLZEN Owner: DELPHI GERMANY Crimp-Validation DELPHI PN 15409041 cable: 0,50 mm + 1,50 mm = 16 x 0,21 mm + 30 x 0,26 mm crimp height: 1,65 mm crimp width: 2,60 mm cable: 1,00 mm + 1,00 mm = 32 x 0,21 mm + 32 x 0,21 mm crimp height: 1,65 mm crimp width: 2,60 mm cable: 0,75 mm + 1,50 mm = 24 x 0,21 mm + 30 x 0,26 mm crimp height: 1,70 mm crimp width: 2,60 mm Date: Date Rev.: 30.06.2009 09.09.2009 Rev.-No.: 01 Record-No. 14045 page 3 / 3 Approved by: DELPHI WUPPERTAL / PETP / NOLZEN Owner: DELPHI GERMANY