P R O D U C T B R I E F Terminus Plug-In Series CDMA864CF Terminal Modem Description The Janus line of Terminus Plug-In modems are footprint compatible, GPS enabled, plug-in terminals for use in GSM/ GPRS, EDGE, CDMA, HSPA+, EV-DO communication networks, and also Wi-Fi connectivity. They were specifically designed to provide customers with cost effective products that are easily integrated into new and existing designs, require limited customer certification resources, and are completely interchangeable to allow for maximum network flexibility while removing the worry of product obsolescence. The Plug-In Terminus CDMA864CF is a dual band, CDMA-1xRTT wireless communication modem specifically designed for worldwide M2M network deployment. Easily integrated into any new or existing hardware applications via its standard DIP pin configuration, the CDMA864CF is a cost-effective solution for CDMA M2M connectivity. Users can choose to mount the CDMA864CF directly onto their PC Board or simply mount in a DIP socket or header. The CDMA864CF has a 5V power supply, 7 configurable GPIOs, 1 DAC and 1 ADC. USB or Serial UARTs can be used to communicate with the device. With all of these innovative and cost effective features, the CDMA864CF is an easy answer for your M2M communication needs. CDMA864CF Features 2111 Comprehensive Drive Aurora, Illinois 60505 630.499.2121 Fax: 630.851.5040 www.janus-rc.com Bulletin Revision Date JA03-PB_CDMA P05 27 Aug 2012 Dual-band CDMA 800 / 1900 MHz Air interface IS-95A/B and CDMA 2000 1xRTT data up to 153.6Kbps (full duplex) TCP/IP stack access via AT commands Over-the-Air firmware management Voice and SMS (MO / MT) Full voice support includes supplementary services Output power * 24.3 dBm (270mW) Sensitivity: * < -108 dBm @ 800 MHz * < -108 dBm @ 1900 MHz Dimensions: 2.5" x 1.4" x 0.415" Operational temperature range: -30C to 80C Internal LDO regulator * Input voltage range: 4.75 to 5.25Vdc (5.0 Vdc Nominal) * Supply disable via terminal input pin CDMA and GPS available via Murata GSC miniature RF connector GPS * Stand alone GPS available at AT command interface * GpsOne(R) (User and Control plane) * NMEA data * GPS fix on demand * Dedicated GPS antenna connection with active antenna support Applications Suitable for all M2M Applications Fleet Management Asset Tracking Security Systems Telemetry Telematics & Telecontrol Remote Monitoring Systems Remote Meter Reading Vending Machines Terminus Models & Ordering Ordering CDMA864CF v2.0 CDMA864CF v3.0 CDMA864CF v4.0 Description Terminus CDMA Plug-In Modem - Sprint Certified Terminus CDMA Plug-In Modem - Verizon Certified Terminus CDMA Plug-In Modem - Aeris Certified Additional Plug-In Products GSM865CF Terminus GSM Plug-In v1.1 Modem - GPS enabled GSM865CF Terminus GSM Plug-In v2.0 Modem - without GPS HSPA910CF Terminus HSPA+ Plug-In v1.0 Modem - GPS Enabled WiFi1500CF Terminus Wi-Fi Plug-In v1.0 Modem - GPS enabled WiFi1500CF Terminus WiFi Plug-In v2.0 Modem - without GPS EVDO910CF Terminus EV-DO Plug-In v3.0 Modem - Verizon Terminus Plug-In Series CDMA864CF Terminal Modem 2.500 1.400 .415 MAX .120 .025 SQ TYP 2.300 .100 .100 TYP .050 .047 DIA (49) .050 PIN 1 PIN 49 PIN 26 PIN 26 (TOP VIEW) 1.100 BOTTOM VIEW 1.100 PIN 49 PIN 25 PIN 1 PIN 25 .100 TYP .150 CDMA864CF .100 2.400 .100 CDMA Mechanical Drawing Division of The Connor-Winfield Corporation 2111 Comprehensive Drive * Aurora, Illinois 60505 630.499.2121 * Fax: 630.851.5040 www.janus-rc.com Terminus Plug-In Janus Remote Communications Europe Bay 143 Shannon Industrial Estate Shannon, Co. Clare, Ireland Phone: +353 61 475 666