1
12-2017, Rev. 1217
www.te.com
© 2013 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
OEG
General Purpose
Low Power PCB Relays
Slimline PCB Relay PCN
n 1 pole 3 A, 1 form A (NO) contact
n Only 5mm wide
n 3A switching current, load range 1mA up to 5A
n Sensitive coil 120mW
n Allows high function-/packing density
n Cadmium-free contacts
n Z type with reinforced insulation
n RoHS compliant (Directive 2002/95/EC)
Typical applications
PLC, temperature control, I/O modules.
Approvals
VDE REG.-Nr.40001589, UL E82292, CQC 08001026045
Technical data of approved types on request.
Contact Data
Contact arrangement 1 from A (NO)
Rated voltage 250VAC/30VDC
Max. switching voltage 277VAC/125VDC
Rated current 3A/5A
Limiting continuous current 3A/5A
Breaking capacity max. 750VA (3A), 1250VA(5A)
Contact material AgNi, gold plated
Contact style bifurcated contact
Min. recommended contact load (reference)
5VDC,100mA
Initial contact resistance 30mΩ at 100mA, 6VDC
Frequency of operation, with/without load 10/300min-1
Electrical endurance
3A, 250VAC, resistive, +70°C 100x103 ops.
5A, 250VAC, resistive, +85°C 30x103 ops.
Contact ratings
Load Cycles
IEC 61810
3A,250VAC, cosφ=1, +70°C 100x103
3A/30VDC, L/R=0ms, +70°C 100x103
5A, 250VAC, cosφ=1, +85°C 30x103
5A 30VDC, L/R=0ms, +85°C 70x103
UL 508
3A, 250VAC, resistive, +25°C 100x103
Pilot duty, B300, +25°C 6x103
Pilot duty, R300, +25°C 6x103
9A LRA, 1.5A FLA, 240VAC, +45°C 30x103
Mechanical endurance, DC coil >10x106 operations
Coil Data
Coil voltage range 3 to 24VDC
Operative range, IEC 61810 1
Coil insulation system according UL Class A
Class F type available upon request
Standard D coil version (120mW), DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% mW
03 3 2.1 0.3 75 120
04 4.5 3.15 0.45 169 120
05 5 3.5 0.5 208 120
06 6 4.2 0.6 300 120
09 9 6.3 0.9 675 120
12 12 8.4 1.2 1200 120
18 18 12.6 1.8 2700 120
23 23.5 16.45 2.35 4602 120
24 24 16.8 2.4 4800 120
Standard L coil version (100mW), DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% mW
03 3 2.1 0.3 90 100
04 4.5 3.15 0.45 202 100
05 5 3.5 0.5 250 100
06 6 4.2 0.6 360 100
09 9 6.3 0.9 810 100
12 12 8.4 1.2 1440 100
18 18 12.6 1.8 3240 100
23 23.5 16.45 2.35 5522 100
24 24 16.8 2.4 5760 100
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Z
2
12-2017, Rev. 1217
www.te.com
© 2013 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
OEG
General Purpose
Low Power PCB Relays
Slimline PCB Relay PCN (Continued)
Insulation Data
Initial dielectric strength
between open contacts 750Vrms
between contact and coil 3000Vrms
Initial surge withstand voltage
between contact and coil 4000V
Clearance/creepage
between contact and coil >3.5mm
Tracking index of relay base PTI600
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature -40 to 85°C
Category of environmental protection
IEC 61810 RTIII - wash tight
Vibration resistance (functional) 10 to 55Hz, 1.5mm
Vibration resistance (destructive) 10 to 55Hz, 1.5mm
Shock resistance (functional)
IEC 60068-2-27 (half sine) min. 98m/s2, 11ms
Shock resistance (destructive) min. 980m/s2, 6ms
Terminal type PCB-THT
Resistance to soldering heat THT
IEC 60068-2-20 260°C/5s
Packaging/unit box/2000 pcs.
PCB layout / terminal assignment
Bottom view on solder pins
Dimensions
Product code structure Typical product code PCN 1 05 D 3 M H Z ,001
Type
PCN Small Slim Power PCB Relay PCN
Number of poles
1 1pole
Coil
Coil code: please refer to coil versions table (e.g. 05=5VDC)
Coil version
D standard 120mW L high sensitivity 100mW
Contact material
3 AgNi
Contact arrangement
M 1 form A, 1 NO contact
Enclosure
H RTIII - wash tight
Insulation
Z Reinforced insulation (tracking resistance of relay base, case PTI 600)
Version
00000 3A model
00100 5A model
Product code Contact Coil voltage Coil Cont. material Enclosure Rating Part number
PCN-105D3MHZ,000 1-pole 5VDC 120mW AgNi RTIII - wash tight 3A 3-1461491-0
PCN-106D3MHZ,000 6VDC 3-1461491-1
PCN-112D3MHZ,000 12VDC 3-1461491-3
PCN-124D3MHZ,000 24VDC 3-1461491-6
PCN-124D3MHZ,001 5A 3-1461491-8 All
Note: This list represents the most common types and does not show all variants covered by this datasheet, other types on request.
