1
CAT 6 Data Wiring System Connectors
TM23 Series
2008.4w
■Features
1. High-Speed Data Transfer
Conforms to the TIA/EIA-568B.2-1 data Wiring standard,
thereby clears CAT 6 transfer performance requirements.
As such, these products easily support Gigabit Ethernet
(1000BASE-T/1000BASE-TX), which is the next
generation of high-speed applications.
2. A Product Lineup Focused on Building of a
Complete System
In addition to modular plugs, Hirose Electric offers box
type outlets, patch panels, and wall outlets. Systems built
using all components from the same manufacturer will
assure stable data transfer.
3. Support of a Wide Variety of Manufacturers'
CAT 6 Cable
To assure high performance of the system we test and
monitor data transfer using CAT 6 cables manufactured
by different suppliers.
100
90
80
70
60
50
40
30
20
10
0
Attenuation/PSNEXT (dB)
CAT 6 PSNEXT standard valueCAT 6 PSNEXT standard value
Measured valueMeasured value
Measured value
CAT 6 Attenuation standard valueCAT 6 Attenuation standard value
CAT 6 PSNEXT standard value
1 10 100 1000
Measured value
Measured value
CAT 6 Attenuation standard value
Permanent Link PSACR
Frequency (MHz)
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
TM23 Series●CAT 6 Data Wiring System Connectors
2
100 M ohms min.
No flashover or insulation breakdown.
230 m ohms max.
No electrical discontinuity of 5μs min.
Contact resistance : 250m ohms max.
No electrical discontinuity of 5μs. min.
Contact resistance : 250m ohms max.
Contact resistance : 250m ohms max.
Contact resistance : 250 m ohms max.
Insulation resistance : 100 M ohms min.
Contact resistance: 250 m ohms max.
Insulation resistance: 1 M ohms min. (High humidity)
Insulation resistance: 100 M ohms min. (Dry state)
Contact resistance: 250 m ohms max.
100 V DC
500 V AC / one minute
100mA
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
1 octave/min. conduct, 10 cycles to each 3 directions.
Acceleration of 490 m/s2, 11 ms duration, sine half-wave
waveform, 3 cycles in each of the 6 axes.
200 cycles
Temperature :
-55±3ç ➝+15ç to +35ç ➝+85±2ç ➝+15ç to +35ç
Duration (Minutes)
: 30 ➝2 to 3 ➝30 ➝2 to 3
5 cycles
500 hours at temperature of 40
ç
and humidity of 90% to 95%.
5% salt water/48 hours.
1.
Insulation resistance
2.
Withstanding voltage
(between adjacent contacts)
3. Contact resistance
4. Vibration
5. Shock
6. Durability
(mating/un-mating)
7. Temperature cycle
8. Humidity
9. Salt Spray
Rating
Current rating 1A
Voltage rating 125V AC Operating temperature range -25
ç
to +60
ç
(Note)
■Plugs, Boots
■Specifications
■Materials and Finishes
Item Specification Conditions
Insulator
Contacts
Strain relief clamp
Polycarbonate
Phosphor bronze
Brass
Color: Clear
Contact area: Gold plated
Nickel plated
UL94V-0
-------------------
-------------------
Component
Plugs Material Finish Remarks
Insulator EPTR White (Standard color)
Black, red, blue, yellow, green, orange, gray, light blue
UL94V-0
-------------------
Component
Boots Material Finish Remarks
Note: Includes temperature rise caused by current flow.
■Ordering Information
●Plugs Series name : TM23
Connector type P : Plug
Size 8 : 8 contacts
Inserted contacts 8P : 8 contacts
1
2
3
8P8-P-TM23
4
1 2 3 4
●Boots Series name : TM23
Connector type P : Plug
Size 8 : 8 contacts
BT : Boot
1
2
3
BT8-P-TM23
4
1 2 3 4
+5
0+5
0
●Jacks Series name : TM23
Connector type R : Jack
Mounting style/termination type
5A : Right-angle/through hole
Jack opening code 8 : For 8 contacts
Number of inserted contacts 8 : 8 contacts
1
2
3
4
5
885A-RTM23
1 2 3 4 5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
3
TM23 Series●CAT 6 Data Wiring System Connectors
■Plugs
Part No.
TM23P-88P 222-2916-6 YES
CL No. RoHS
TM23P-88P
C6
1
(25)
24
5.4 10.05
10.05
6
17
(17.5)
Contact No. 1
Connecter guide insert
(Shown inserted)
Contact No. 8
11.7
5.05
(12.9)
8.9
6.6 6.09
4.75
Plug body Connector guide insert *
Strain relief clamp *
(15.45)
BOverview
.Contact configured for CAT 6 performance.
.0.5 mm dia. solid wire or AWG #24 stranded wire.
.
Use with cables having external diameters of 5.4 mm to 6.8mm.
.Strain relief clamp protects the contact/conductor
termination areas.
BMated with corresponding receptacle
(Shown for reference only)
* Supplied separately(1bag contains 1pcs.)
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
TM23 Series●CAT 6 Data Wiring System Connectors
4
■Boots
Part Number CL No. Color RoHS
TM23P-8-BT(01)
TM23P-8-BT(01)
TM23P-8-BT(02)
TM23P-8-BT(03)
TM23P-8-BT(04)
TM23P-8-BT(05)
TM23P-8-BT(06)
TM23P-8-BT(07)
TM23P-8-BT(08)
222-2917-9-02
222-2917-9-01
222-2917-9-02
222-2917-9-03
222-2917-9-04
222-2917-9-05
222-2917-9-06
222-2917-9-07
222-2917-9-08
White
Black
Red
Blue
Yellow
Green
Orange
Gray
Light Blue
YES
TM23P-8-BT
1
12
13.4
(12)
(4)
25.3
(17.2)
(16.9)
10.8
10.8
8.8
(6.5)
Ø6.8
(40)
TM23P-88P
Protected lock/release lever
Ø6.8MAX
BOverview
.Dedicated boots for the TM23P-88P.
.9 color variations.
.Halogen-free.
.Protects the plug’s lock/release lever.
BBoot installed
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
5
TM23 Series●CAT 6 Data Wiring System Connectors
■Manual Termination Tool
Note: To achieve CAT 6 performance, refer to
TM23P-88P Cable Termination Procedure Manual(ETAD-E2415).
Solid copper conductor:
0.5mm dia.
Stranded copper conductor:
AWG#24
(0.95mm to 1.05mm)
(5.4mm to 6.8mm)
Conductor
Individual conductor
insulation dia.
Overall jacket dia.
Filler
Conductor
Insulation
Jacket
■Recommended Cable Specification
HRS marking side
(For contact/conductor termination)
A
Reverse side
(For cable strain relief clamp crimping)
Part No.
HT601-TM23/22P-88P 902-2128-1
CL No.
* Changing the “A” Assembly parts to TM22 dedicated clamp parts will
allow wiring of Hirose’s TM22P-88P plugs supporting CAT 5e.
Body
Applicator
Item
●Automatic Contact Termination Machine
CM-105
AP105-TM23P-88P
Part Number
CL901-0005-4
CL901-2588-5
CL No.
●Cable Strain Relief Clamp Crimping Jig (Manual operated)
TM23P-88P/CK-MP(01)
Part Number
CL902-2130-3(01)
CL No.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
6
TM23 Series●CAT 6 Data Wiring System Connectors
Note: The jack by itself does not clear CAT 6 performance requirements. Compensation on the
board is required to secure CAT 6 performance.
■Jacks
Part Number CL No. Color RoHS
TM23R-5A-88(50) 222-2918-1-50 Black YES
BOverview
.Unique contact structure designed for crosstalk reduction.
.(Through hole : 3 rows)
.Temporary retention to board with integral flexible posts.
BPCB mounting pattern
1
2
3
4
5
6
7
8
15
6
Connector front edge
1.016
3.048
5.08
7.112
1.3
2.544
Recommended board thickness: 1.6mm
8-Ø0.8
2-Ø2.4
15
15
14.56
13
Contact No. 8 Contact No. 1
Flexible post
0.43
42.54
1.3
3
2.1
0.35
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
7
TM23 Series●CAT 6 Data Wiring System Connectors
■ Precautions in System Construction
The TM23 Series connector and components were designed for CAT 6 data transfer. However, it is highly
recommended that the entire connected system be checked for this performance level.
●Cable termination procedures
Manufacturer's Name Web Site
Hitachi Cable, Ltd. http://www.hitachi-cable.co.jp/index_e.html
Tonichi Kyosan Cable, Ltd. http://www.tonichi-kyosan.co.jp/
NipponSeisen Co. Ltd. http://www.nscable.co.jp/
Okano Electric Wire Co., Ltd. http://www.okano-cable.co.jp/english/index.html
Tsushin Kogyo K.K. http://www.tsuko.co.jp/
Showa Electric Wire & Cable Co., Ltd. http://www.swcc.co.jp/eng/index.html
Fuji Electric Cable Co, Ltd. http://www.tokyo-fuji.co.jp/index_f.htm
●Recommended Cable Manufacturers
Hirose Electric closely examines the transfer performance of these connectors with the CAT 6 cable that is
manufactured and sold by the various cable manufacturers. Please use the cable from among those indicated in
Table 1 for system construction with the TM23 Series.
●Use of Different Manufacturers' Components
Use of different manufacturers' components in one system could cause the deterioration of transfer performance.
●Check of the System Performance Verification
All measures have been taken to assure the transfer performance of the TM23 series. However, it is highly
recommended to verify transfer performance of complete system using commercially available measuring
instruments.
Hirose Electric does not build wiring systems. Please contact Hirose Electric sales representative for system
construction contractor information.
Note: Please see the web sites of the various manufacturers for cable specifications.
Contact HRS for recommendations when using cables from other suppliers.
Table1 Recommended Cable Manufacturers
Cable termination procedure manual No.
ETAD-E2415 TM23P-88P
Part Number
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
8
TM23 Series●CAT 6 Data Wiring System Connectors
DSP4300
Main unit
DSP4300
Remote unit
Permanent link adapter (PM06)
Horizontal cable 90 m
TM23R-MPP24 TM23R-T01
.Permanent Links Permanent Link PSACR
Frequency (MHz)
DSP4300
Main unit
Channel link
adapter
DSP4300
Remote unit
Horizontal cable 90 m
TM23R-MPP24
Stranded
wire 3 m
Patch cable
2 m
TM23R-T01
( :TM23P-88P)
Patch cable
5 m
.Channel Links
Channel Link PSACR
Frequency (MHz)
.Patch Cable
Patch Cable 2 m RL
Frequency (MHz)
Measured value
CAT 6 NEXT standard valueCAT 6 NEXT standard value
120
100
80
60
40
20
0
NEXT(dB)
1 10 100 1000
Measured value
CAT 6 NEXT standard value
Patch Cable 2 m NEXT
Frequency (MHz)
DSP4300
Main unit
Channel link adapter
Patch Cable 2 m
DSP4300
Remote unit
■ Technical Documentation
●CAT 6 Transmission Characteristics Data
This is representative transfer performance for the TM23 Series. A high margin is used for CAT 6 standard values.
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
http://www.hirose-connectors.com
®
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.