HDSP-550x, HDSP-552x, HDSP-560x, HDSP-562x, HDSP-570x, HDSP-572x, HDSP-H15x, Series 14.2 mm (0.56 inch) Seven Segment Displays Data Sheet Description Features The 14.2 mm (0.56 inch) LED seven segment displays are designed for viewing distances up to 7 metres (23 feet). These devices use an industry standard size package and pinout. Both the numeric and 1 overflow devices feature a right hand decimal point. All devices are available as either common anode or common cathode. * Industry Standard Size * Industry Standard Pinout 15.24 mm (0.6 in.) DIP Leads on 2.54 mm (0.1 in.) Centers * Choice of Colors AlGaAs Red, High Efficiency Red, Yellow, Green * Excellent Appearance Evenly Lighted Segments Mitered Corners on Segments Gray Package Gives Optimum Contrast 50 Viewing Angle * Design Flexibility Common Anode or Common Cathode Single and Dual Digits Right Hand Decimal Point 1. Overflow Character * Categorized for Luminous Intensity Yellow and Green Categorized for Color Use of Like Categories Yields a Uniform Display * High Light Output * High Peak Current * Excellent for Long Digit String Multiplexing * Intensity and Color Selection Option See Intensity and Color Selected Displays Data Sheet * Sunlight Viewable AlGaAs Applications These displays are ideal for most applications. Pin for pin equivalent displays are also available in a low current design. The low current displays are ideal for portable applica tions. For additional information see the Low Current Seven Segment Displays data sheet. Devices AlGaAs Red HDSP-[1] HER HDSP-[1] Yellow HDSP- Green HDSPDescription H151 5501 5701 5601 Common Anode Right Hand Decimal A H153 5503 5703 5603 Common Cathode Right Hand Decimal B H157 5507 5607 Common Anode 1. Overflow C H158 5508 5608 Common Cathode 1. Overflow D 5521 5621 Two Digit Common Anode Right Hand Decimal E 5721 5523 5723 5623 Two Digit Common Cathode Right Hand Decimal Package Drawing F Note: 1. These displays are recommended for high ambient light operation. Please refer to the HDSP-H10X/K12X AlGaAs and HDSP-555X HER data sheet for low current operation. Contrast Enhancement Mechanical The objective of contrast enhancement is to provide good display readability in the end use ambient light. The concept is to employ both luminance and chrominance contrast techniques to enhance the readability. This is accomplished by having the OFF dots blend into the display background and the ON dots stand out vividly against this same background. Therefore, these display devices are assembled with a gray package and matching encapsulating epoxy in the dots. Specially developed plastics are used to optimize the displays optical performance. These plastics restrict the solvents that may be used for cleaning. Only mixtures of Freon (F113) and alcohol should be used for vapor cleaning processes. Total immersion time in the vapors is two minutes. Some suggested mixtures are Freon TE, Arklone A or K, or Genesolv DI-15 or DE-15. A 60C (140F) water cleaning process may also be used. This process includes a neutralizer rinse (3% ammonia solution or equivalent), a surfactant rinse (1% detergent solution or equivalent), a water rinse, and a thorough air dry. Room temperature cleaning may be done with Freon T-E35 or T-P35, Ethanol, Isopropanol, or water with a mild detergent. Contrast enhancement may be achieved by using one of the following suggested filters: Standard Red and AlGaAs Red (HDSP-5300/H150) Panelgraphic RUBY RED 60 SGL-Homalite H100-1605 RED 3M Louvered Filter R6610 RED or N0210 GRAY HER (HDSP-5500) Panelgraphic SCARLET RED 60 SGL-Homalite H100-1670 RED or H100-1250 GRAY 3M Louvered Filter R6610 RED or N0210 GRAY Yellow (HDSP-5700) Panelgraphic YELLOW 27 or GRAY 10 SGL-Homalite H100-1720 AMBER or H100-1250 GRAY 3M Louvered Filter A5910 AMBER or N0210 GRAY Green (HDSP-5600) Panelgraphic GREEN 48 SGL-Homalite H100-1440 GREEN or H100-1250 GRAY 3M Louvered Filter YG6610 RED or N0210 GRAY For further information on contrast enhancement please see Application Note 1015. 2 Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. Part Numbering System 5082 -X XX X-X X X XX HDSP-X XX X-X X X XX Mechanical Options[1] 00: No Mechanical Option Color Bin Options[1,2] 0: No Color Bin Limitation Maximum Intensity Bin[1,2] 0: No Maximum Intensity Bin Limitation Minimum Intensity Bin[1,2] 0: No Minimum Intensity Bin Limitation Device Configuration/Color[1] 1: Common Anode 3: Common Cathode Device Specific Configuration[1] Refer to Respective Datasheet Package[1] H: 14.2 mm (0.56 inch) Single Digit Seven Segment Display Notes: 1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Avago representative for details. 2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information. 3 Package Dimensions PIN A B C 1 CATHODE e ANODE e CATHODE c E E CATHODE NO. 1 F E ANODE NO. 1 2 CATHODE d ANODE d ANODE c, d CATHODE c, d 3 ANODE[3] CATHODE[4] CATHODE b ANODE b 4 CATHODE c ANODE c ANODE a, b, DP CATHODE a, b, DP 5 CATHODE DP ANODE DP CATHOPDE DP ANODE DE 6 CATHODE b ANODE b CATHODE a ANODE a 7 CATHODE a ANODE a ANODE a, b, DP CATHODE a, b, DP 8 ANODE[3] CATHODE[4] ANODE c, d CATHODE c, d 9 CATHODE f ANODE f CATHODE d ANODE d 10 CATHODE g ANODE g NO PIN NO PIN 11 12 13 14 15 16 D CATHODE NO. 1 C CATHODE NO. 1 DP CATHODE NO. 1 E CATHODE NO. 2 D CATHODE NO. 2 G CATHODE NO. 2 C CATHODE NO. 2 DP CATHODE NO. 2 B CATHODE NO. 2 A CATHODE NO. 2 F CATHODE NO. 2 DIGIT NO. 2 ANODE DIGIT NO. 1 ANODE B CATHODE NO. 1 A CATHODE NO. 1 D ANODE NO. 1 C ANODE NO. 1 DP ANODE NO. 1 E ANODE NO. 2 D ANODE NO. 2 G ANODE NO. 2 C ANODE NO. 2 DP ANODE NO. 2 B ANODE NO. 2 A ANODE NO. 2 F ANODE NO. 2 DIGIT NO. 2 CATHODE DIGIT NO. 1 CATHODE B ANODE NO. 1 A ANODE NO. 1 17 18 G CATHODE NO. 1 F CATHODE NO. 1 G ANODE NO. 1 F ANODE NO. 1 NOTES: 1. ALL DIMENSIONS IN MILLIMETRES (INCHES). 2. ALL UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY. 3. REDUNDANT ANODES. 4. REDUNDANT CATHODES. 5. FOR HDSP-5600/-5700 SERIES PRODUCT ONLY. 4 FUNCTION D ANODE c Internal Circuit Diagram Absolute Maximum Ratings Description Average Power per Segment or DP AlGaAs Red HDSP-H150 Series HER HDSP-5500 Series Yellow HDSP-5700 Series Green HDSP-5600 Series Units 96 105 80 105 mW mA Peak Forward Current per Segment or DP 160 90 60 90 DC Forward Current per Segment or DP 40[2] 30[4] 20[6] 3018] Operating Temperature Range Storage Temperature Range [1] [3] [5] -20 to +100[9] -40 to +100 [7] C -55 to +100 C Reverse Voltage* per Segment or DP 3.0 V Wavesoldering Temperature for 3 Seconds (1.60 mm [0.063 in.] below body) 250 C * Reverse Voltage is for LED testing purpose and not recommended to be used as application condition. Notes: 1. See Figure 2 to establish pulsed conditions. 2. Derate above 46C at 0.54 mA/C. 3. See Figure 7 to establish pulsed conditions. 4. Derate above 53C at 0.45 mA/C. 5 See Figure 8 to establish pulsed conditions. 6. Derate above 81C at 0.52 mA/C. 7. See Figure 9 to establish pulsed conditions. 8. Derate above 39C at 0.37 mA/C. 9. For operation below -20C, contact your local Avago components sales office or an authorized distributor. 5 Electrical/Optical Characteristics at TA = 25C AlGaAs Red Device Series HDSP- Parameter Luminous Intensity/Segment (Digit Average) [1,2,5] Symbol Min. Typ. Max. IV 9.1 16.0 Units Test Conditions mcd IF = 20 mA 1.8IF = 20 mA Forward Voltage/Segment or DP VF V 2.0 3.0IF = 100 mA H15X Peak Wavelength lPEAK 645 nm ld 637 nm Dominant Wavelength[3] Reverse Voltage/Segment or DP [4] Temperature Coefficient of VF /Segment or DP VR 3.0 15 V IR = 100 A VF/C -2mV/C Thermal Resistance LED JunctionRqJ-Pin 400 C/W/ to-Pin Seg High Efficiency Red Device Series HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions 900 2800IF = 10 mA Luminous Intensity/Segment[1,2,6] IVcd (Digit Average) 3700 IF = 60 mA Peak: 1 of 6 df 55XX Forward Voltage/Segment or DP Dominant Wavelength Reverse Voltage/Segment or DP VF 2.1 2.5 V lPEAK 635 nm Peak Wavelength ld 626 nm [3] Temperature Coefficient of VF /Segment or DP [4] VR 3.0 30 V VF/C -2mV/C Thermal Resistance LED JunctionRqJ-Pin 345 C/W/ to-Pin Seg 6 IF = 20 mA IR = 100 A Yellow Device Series HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions 600 1800IF = 10 mA Luminous Intensity/Segment[1,2] IVcd (Digit Average) 2750 IF = 60 mA Peak: 1 of 6 df 57XX Forward Voltage/Segment or DP Dominant Wavelength Reverse Voltage/Segment or DP VF 2.1 2.5 V IF = 20 mA lPEAK 583 nm Peak Wavelength [3,7] [4] Temperature Coefficient of VF /Segment or DP ld 581.5 VR 3.0 586 592.5 40 nm V IR = 100 A VF/C -2mV/C Thermal Resistance LED JunctionRqJ-Pin 345 C/W/ to-Pin Seg High Performance Green Device Series HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions 900 2500 IF = 10 mA Luminous Intensity/Segment[1,2] IVcd (Digit Average) 3100 IF = 60 mA Peak: 1 of 6 df 56XX Forward Voltage/Segment or DP Dominant Wavelength Reverse Voltage/Segment or DP VF 2.1 2.5 V IF = 10 mA lPEAK 566 nm Peak Wavelength [3,7] Temperature Coefficient of VF /Segment or DP [4] ld 571 VR 50 3.0 577 nm V IR = 100 A VF /C -2mV/C Thermal Resistance LED JunctionRqJ-Pin 345 C/W/ to-Pin Seg Notes: 1. Device case temperature is 25C prior to the intensity measurement. 2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package. 3. The dominant wavelength, ld, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device. 4. Typical specification for reference only. Do not exceed absolute maximum ratings. 5. For low current operation, the AlGaAs HDSP-H10X series displays are recommended. They are tested at 1 mA dc/segment and are pin for pin compatible with the HDSP-H15X series. 6. For low current operation, the HER HDSP-555X series displays are recommended. They are tested at 2 mA dc/segment and are pin for pin compatible with the HDSP-550X series. 7. The Yellow (HDSP-5700) and Green (HDSP-5600) displays are categorized for dominant wavelength. The category is designated by a number adjacent to the luminous intensity category letter. 7 AlGaAs Red 50 45 40 RJ-A = 770 C/W AlGaAs RED 35 30 25 20 15 10 5 0 20 30 40 50 60 70 80 Figure 2. Maximum Tolerable Peak Current vs. Pulse Duration - AlGaAs Red. IF - FORWARD CURRENT PER SEGMENT - mA IDC MAX. - MAXIMUM DC CURRENT PER SEGMENT - mA Figure 1. Maximum Tolerable Peak Current vs. Pulse Duration - Red. 90 100 110 120 160 140 120 AlGaAs RED 100 80 60 40 20 0 0 TA - AMBIENT TEMPERATURE - C PEAK - NORMALIZED RELATIVE EFFICIENCY 1.50 1.25 1.00 AlGaAs RED 0.50 0.25 10 15 20 25 30 35 40 IF - FORWARD CURRENT PER SEGMENT - mA Figure 5. Relative Luminous Intensity vs. DC Forward Current. HDSP-530X fig 5 8 RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 20 mA) 1.75 5 2.0 2.5 3.0 3.5 4.0 HDSP-530X fig 4 2.00 0 1.5 Figure 4. Forward Current vs. Forward Voltage. HDSP-530X fig 3 0 1.0 VF - FORWARD VOLTAGE - V Figure 3. Maximum Allowable DC Current vs. Ambient Temperature. 0.75 0.5 1.4 1.2 1.0 0.8 0.6 0.5 AlGaAs RED 5.0 50.0 150.0 IPEAK - PEAK FORWARD CURRENT PER SEGMENT - mA Figure 6. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak HDSP-530X Current. fig 6 HER, Yellow, Green Figure 9. Maximum Tolerable Peak Current vs. Pulse Duration - Green. Figure 10. Maximum Allowable DC Current vs. Ambient Temperature. 90 4.0 80 RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 10 mA) GREEN SERIES 70 60 YELLOW SERIES 50 HER SERIES, ORANGE SERIES 40 30 20 10 0 3.0 2.5 2.0 1 2 3 4 5 Figure 11. Forward Current vs. Forward Voltage. HDSP-52XE fig 2 HER, YELLOW, GREEN 1.5 1.0 0.5 0 VF - FORWARD VOLTAGE - V 9 3.5 0 5 10 15 20 25 30 35 IF - DC FORWARD CURRENT - mA Figure 12. Relative Luminous Intensity vs. DC Forward Current. HDSP-52XE fig 3 40 hV - RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA PER SEGMENT) Figure 8. Maximum Tolerable Peak Current vs. Pulse Duration - Yellow. IF - FORWARD CURRENT PER SEGMENT - mA Figure 7. Maximum Tolerable Peak Current vs. Pulse Duration - HER 1.6 YELLOW SERIES 1.5 HER SERIES, ORANGE SERIES 1.4 1.3 GREEN SERIES 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0 10 20 30 40 50 60 70 80 90 100 IPEAK - PEAK FORWARD CURRENT PER SEGMENT - mA Figure 13. Relative Efficiency (Luminous Intensity per Unit Current) vs.HDSP-52XE Peak Current. fig 4 Electrical/Optical Yellow For more information on electrical/optical characteristics, please see Application Note 1005. HDSP-570x/572x IV Bin Category Contrast Enhancement For information on contrast enhancement please see Application Note 1015. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloro-ethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For information on soldering LEDs please refer to Application Note 1027. Min. Max. K 9.20 16.90 L 13.80 25.30 M 20.70 38.00 N 31.10 56.90 O 46.60 85.40 Max. D 0.61 1.11 E 0.91 1.67 F 1.37 2.51 G 2.05 3.76 H 3.08 5.64 I 4.62 8.64 J 6.93 12.70 K 10.39 19.04 Min. Max. E 0.91 1.67 Green HDSP-560x/562x IV Bin Category Intensity Bin Limits (mcd) AlGaAs Red HDSP-H15x IV Bin Category Min. F 1.37 2.51 G 2.05 3.76 H 3.08 5.64 I 4.61 8.46 Color Categories Color Bin Dominant Wavelength (nm) Min. Max. Yellow 1 581.50 585.00 HER 3 584.00 587.50 HDSP-550x/552x IV Bin Category 2 586.50 590.00 Max. 4 589.00 592.50 2 573.00 577.00 Min. E 0.91 1.67 Green F 1.37 2.51 3 570.00 574.00 G 2.05 3.76 4 567.00 571.00 H 3.08 5.64 5 564.00 568.00 I 4.62 8.64 J 6.93 12.70 K 10.39 19.04 For product information and a complete list of distributors, please go to our web site: Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representatives for further clarification/information. www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright (c) 2005-2015 Avago Technologies. All rights reserved. Obsoletes 5988-4273EN AV02-1107EN - May 26, 2015 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Avago Technologies: HDSP-5501-GG000 HDSP-5503-GH000 HDSP-5601-GH000 HDSP-5607 HDSP-5621-GH000