HDSP-550x, HDSP-552x, HDSP-560x, HDSP-562x,
HDSP-570x, HDSP-572x, HDSP-H15x, Series
14.2 mm (0.56 inch)
Seven Segment Displays
Data Sheet
AlGaAs Red HER Yellow Green Package
HDSP-[1] HDSP-[1] HDSP- HDSP- Description Drawing
H151 5501 5701 5601 Common Anode Right Hand Decimal A
H153 5503 5703 5603 Common Cathode Right Hand Decimal B
H157 5507 5607 Common Anode ±1. Overow C
H158 5508 5608 Common Cathode ±1. Overow D
5521 5721 5621 Two Digit Common Anode Right Hand Decimal E
5523 5723 5623 Two Digit Common Cathode Right Hand Decimal F
Devices
Note:
1. These displays are recommended for high ambient light operation. Please refer to the HDSP-H10X/K12X AlGaAs and HDSP-555X HER data sheet
for low current operation.
Description
The 14.2 mm (0.56 inch) LED seven segment displays are
designed for viewing distances up to 7 metres (23 feet).
These devices use an industry standard size package and
pinout. Both the numeric and ±1 overow devices feature
a right hand decimal point. All devices are available as
either common anode or common cathode.
Applications
These displays are ideal for most applications. Pin for pin
equivalent displays are also available in a low current
design. The low current displays are ideal for portable
applica tions. For additional information see the Low
Current Seven Segment Displays data sheet.
Features
• Industry Standard Size
• Industry Standard Pinout
15.24 mm (0.6 in.) DIP Leads on 2.54 mm (0.1 in.)
Centers
• Choice of Colors
AlGaAs Red, High Eciency Red, Yellow, Green
• Excellent Appearance
Evenly Lighted Segments
Mitered Corners on Segments
Gray Package Gives Optimum Contrast
±50° Viewing Angle
• Design Flexibility
Common Anode or Common Cathode
Single and Dual Digits
Right Hand Decimal Point
±1. Overow Character
• Categorized for Luminous Intensity
Yellow and Green Categorized for Color
Use of Like Categories Yields a Uniform Display
• High Light Output
• High Peak Current
• Excellent for Long Digit String Multiplexing
• Intensity and Color Selection Option
See Intensity and Color Selected Displays Data
Sheet
• Sunlight Viewable AlGaAs
2
Contrast Enhancement
The objective of contrast enhancement is to provide
good display readability in the end use ambient light.
The concept is to employ both luminance and chromi-
nance contrast techniques to enhance the readability.
This is accom plished by having the OFF dots blend into
the display background and the ON dots stand out vividly
against this same background. Therefore, these display
devices are assembled with a gray package and matching
encapsulating epoxy in the dots.
Contrast enhancement may be achieved by using one of
the following suggested lters:
Standard Red and AlGaAs Red (HDSP-5300/H150)
Panelgraphic RUBY RED 60
SGL-Homalite H100-1605 RED
3M Louvered Filter R6610 RED or N0210 GRAY
HER (HDSP-5500)
Panelgraphic SCARLET RED 60
SGL-Homalite H100-1670 RED or H100-1250 GRAY
3M Louvered Filter R6610 RED or N0210 GRAY
Yellow (HDSP-5700)
Panelgraphic YELLOW 27 or GRAY 10
SGL-Homalite H100-1720 AMBER or H100-1250 GRAY
3M Louvered Filter A5910 AMBER or N0210 GRAY
Green (HDSP-5600)
Panelgraphic GREEN 48
SGL-Homalite H100-1440 GREEN or H100-1250 GRAY
3M Louvered Filter YG6610 RED or N0210 GRAY
For further information on contrast enhancement please
see Application Note 1015.
Mechanical
Specially developed plastics are used to optimize the
displays optical performance. These plastics restrict the
solvents that may be used for cleaning. Only mixtures of
Freon (F113) and alcohol should be used for vapor clean-
ing processes. Total immersion time in the vapors is two
minutes. Some suggested mixtures are Freon TE, Arklone
A or K, or Genesolv DI-15 or DE-15. A 60°C (140°F) water
cleaning process may also be used. This process includes
a neutralizer rinse (3% ammonia solution or equivalent),
a surfactant rinse (1% detergent solution or equivalent),
a water rinse, and a thorough air dry. Room temperature
cleaning may be done with Freon T-E35 or T-P35, Ethanol,
Isopropanol, or water with a mild detergent.
Cleaning agents from the ketone family (acetone, methyl
ethyl ketone, etc.) and from the chlorinated hydrocarbon
family (methylene chloride, trichloro ethylene, carbon tet-
rachloride, etc.) are not recommended for cleaning LED
parts. All of these various solvents attack or dissolve the
encapsulating epoxies used to form the package of plastic
LED parts.
3
Part Numbering System
Notes:
1. For codes not listed in the gure above, please refer to the respective datasheet or contact your nearest Avago rep-
resentative for details.
2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per
tube (exceptions may apply). Please refer to respective datasheet for specic bin limit information.
5082 -X XX X-X X X XX
HDSP-X XX X-X X X XX
Mechanical Options[1]
00: No Mechanical Option
Color Bin Options[1,2]
0: No Color Bin Limitation
Maximum Intensity Bin[1,2]
0: No Maximum Intensity Bin Limitation
Minimum Intensity Bin[1,2]
0: No Minimum Intensity Bin Limitation
Device Conguration/Color[1]
1: Common Anode
3: Common Cathode
Device Specic Conguration[1]
Refer to Respective Datasheet
Package[1]
H: 14.2 mm (0.56 inch) Single Digit Seven Segment Display
4
FUNCTION
PIN A B C D E F
1 CATHODE e ANODE e CATHODE c ANODE c E CATHODE NO. 1 E ANODE NO. 1
2 CATHODE d ANODE d ANODE c, d CATHODE c, d D CATHODE NO. 1 D ANODE NO. 1
3 ANODE[3] CATHODE[4] CATHODE b ANODE b C CATHODE NO. 1 C ANODE NO. 1
4 CATHODE c ANODE c ANODE a, b, DP CATHODE a, b, DP DP CATHODE NO. 1 DP ANODE NO. 1
5 CATHODE DP ANODE DP CATHOPDE DP ANODE DE E CATHODE NO. 2 E ANODE NO. 2
6 CATHODE b ANODE b CATHODE a ANODE a D CATHODE NO. 2 D ANODE NO. 2
7 CATHODE a ANODE a ANODE a, b, DP CATHODE a, b, DP G CATHODE NO. 2 G ANODE NO. 2
8 ANODE[3] CATHODE[4] ANODE c, d CATHODE c, d C CATHODE NO. 2 C ANODE NO. 2
9 CATHODE f ANODE f CATHODE d ANODE d DP CATHODE NO. 2 DP ANODE NO. 2
10 CATHODE g ANODE g NO PIN NO PIN B CATHODE NO. 2 B ANODE NO. 2
11 A CATHODE NO. 2 A ANODE NO. 2
12 F CATHODE NO. 2 F ANODE NO. 2
13 DIGIT NO. 2 ANODE DIGIT NO. 2 CATHODE
14 DIGIT NO. 1 ANODE DIGIT NO. 1 CATHODE
15 B CATHODE NO. 1 B ANODE NO. 1
16 A CATHODE NO. 1 A ANODE NO. 1
17 G CATHODE NO. 1 G ANODE NO. 1
18 F CATHODE NO. 1 F ANODE NO. 1
NOTES:
1. ALL DIMENSIONS IN MILLIMETRES (INCHES).
2. ALL UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY.
3. REDUNDANT ANODES.
4. REDUNDANT CATHODES.
5. FOR HDSP-5600/-5700 SERIES PRODUCT ONLY.
Package Dimensions
5
Internal Circuit Diagram
Absolute Maximum Ratings
Description
AlGaAs Red
HDSP-H150
Series
HER
HDSP-5500
Series
Yellow
HDSP-5700
Series
Green
HDSP-5600
Series Units
Average Power per Segment or DP 96 105 80 105 mW
Peak Forward Current per Segment or DP 160[1] 90[3] 60[5] 90[7] mA
DC Forward Current per Segment or DP 40[2] 30[4] 20[6] 3018]
Operating Temperature Range -20 to +100[9] -40 to +100 °C
Storage Temperature Range -55 to +100 °C
Reverse Voltage* per Segment or DP 3.0 V
Wavesoldering Temperature for 3 Seconds
(1.60 mm [0.063 in.] below body)
250 °C
* Reverse Voltage is for LED testing purpose and not recommended to be used as application condition.
Notes:
1. See Figure 2 to establish pulsed conditions.
2. Derate above 46°C at 0.54 mA/°C.
3. See Figure 7 to establish pulsed conditions.
4. Derate above 53°C at 0.45 mA/°C.
5 See Figure 8 to establish pulsed conditions.
6. Derate above 81°C at 0.52 mA/°C.
7. See Figure 9 to establish pulsed conditions.
8. Derate above 39°C at 0.37 mA/°C.
9. For operation below -20°C, contact your local Avago components sales oce or an authorized distributor.
6
Electrical/Optical Characteristics at TA = 25°C
AlGaAs Red
High Eciency Red
Device
Series
HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions
Luminous Intensity/Segment[1,2,5] IV 9.1 16.0 mcd IF = 20 mA
(Digit Average)
1.8 IF = 20 mA
Forward Voltage/Segment or DP VF V
2.0 3.0 IF = 100 mA
H15X
Peak Wavelength lPEAK 645 nm
Dominant Wavelength[3] ld 637 nm
Reverse Voltage/Segment or DP[4] VR 3.0 15 V IR = 100 µA
Temperature Coecient of ∆VF/°C -2 mV/°C
VF/Segment or DP
Thermal Resistance LED Junction- RqJ-Pin 400 °C/W/
to-Pin Seg
Device
Series
HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions
900 2800 IF = 10 mA
Luminous Intensity/Segment[1,2,6] IV µcd
(Digit Average) 3700 IF = 60 mA Peak:
1 of 6 df
Forward Voltage/Segment or DP VF 2.1 2.5 V IF = 20 mA
55XX
Peak Wavelength lPEAK 635 nm
Dominant Wavelength[3] ld 626 nm
Reverse Voltage/Segment or DP[4] VR 3.0 30 V IR = 100 µA
Temperature Coecient of ∆VF/°C -2 mV/°C
VF/Segment or DP
Thermal Resistance LED Junction- RqJ-Pin 345 °C/W/
to-Pin Seg
7
Yellow
Device
Series
HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions
600 1800 IF = 10 mA
Luminous Intensity/Segment[1,2] IV µcd
(Digit Average) 2750 IF = 60 mA Peak:
1 of 6 df
Forward Voltage/Segment or DP VF 2.1 2.5 V IF = 20 mA
57XX
Peak Wavelength lPEAK 583 nm
Dominant Wavelength[3,7] ld 581.5 586 592.5 nm
Reverse Voltage/Segment or DP[4] VR 3.0 40 V IR = 100 µA
Temperature Coecient of ∆VF/°C -2 mV/°C
VF/Segment or DP
Thermal Resistance LED Junction- RqJ-Pin 345 °C/W/
to-Pin Seg
High Performance Green
Notes:
1. Device case temperature is 25°C prior to the intensity measurement.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, ld, is derived from the CIE chromaticity diagram and is that single wavelength which denes the color of the device.
4. Typical specication for reference only. Do not exceed absolute maximum ratings.
5. For low current operation, the AlGaAs HDSP-H10X series displays are recommended. They are tested at 1 mA dc/segment and are pin for pin
compatible with the HDSP-H15X series.
6. For low current operation, the HER HDSP-555X series displays are recommended. They are tested at 2 mA dc/segment and are pin for pin com-
patible with the HDSP-550X series.
7. The Yellow (HDSP-5700) and Green (HDSP-5600) displays are categorized for dominant wavelength. The category is designated by a number
adjacent to the luminous intensity category letter.
Device
Series
HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions
900 2500 IF = 10 mA
Luminous Intensity/Segment[1,2] IV µcd
(Digit Average)` 3100 IF = 60 mA Peak:
1 of 6 df
Forward Voltage/Segment or DP VF 2.1 2.5 V IF = 10 mA
56XX
Peak Wavelength lPEAK 566 nm
Dominant Wavelength[3,7] ld 571 577 nm
Reverse Voltage/Segment or DP[4] VR 3.0 50 V IR = 100 µA
Temperature Coecient of ∆VF/°C -2 mV/°C
VF/Segment or DP
Thermal Resistance LED Junction- RqJ-Pin 345 °C/W/
to-Pin Seg
8
AlGaAs Red
Figure 2. Maximum Tolerable Peak Current vs. Pulse
Duration – AlGaAs Red.
Figure 1. Maximum Tolerable Peak Current vs. Pulse
Duration – Red.
Figure 3. Maximum Allowable DC Current vs. Ambient Temperature. Figure 4. Forward Current vs. Forward Voltage.
Figure 5. Relative Luminous Intensity vs. DC Forward Current. Figure 6. Relative Eciency (Luminous Intensity per
Unit Current) vs. Peak Current.
HDSP-530X fig 3
I
DC
MAX. – MAXIMUM DC CURRENT PER SEGMENT – mA
20
0
TA – AMBIENT TEMPERATURE – C
30 90 120
50
30
7050
AlGaAs RED
10
20
5
15
25
35
40 60 80 100 110
40
45
RθJ-A = 770 C/W
HDSP-530X fig 4
IF – FORWARD CURRENT PER SEGMENT – mA
0
0
VF – FORWARD VOLTAGE – V
160
100
60
2.0 4.
0
80
20
1.0 3.0
40
AlGaAs RED
0.5 1.5 2.5 3.5
120
140
HDSP-530X fig 5
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 20 mA)
0
0
IF – FORWARD CURRENT PER SEGMENT – mA
2.00
1.50
1.25
0.75
0.25
20 40
1.75
1.00
0.50
10 30
5152
53
5
AlGaAs RED
HDSP-530X fig 6
η
PEAK – NORMALIZED RELATIVE EFFICIENCY
0.5
0.6
IPEAK – PEAK FORWARD CURRENT
PER SEGMENT – mA
50.0 150.0
1.4
0.8
5.0
1.0
1.2
AlGaAs RED
9
Figure 11. Forward Current vs. Forward Voltage.
Figure 9. Maximum Tolerable Peak Current vs.
Pulse Duration – Green.
Figure 10. Maximum Allowable DC Current vs. Ambient
Temperature.
Figure 12. Relative Luminous Intensity vs. DC
Forward Current.
Figure 13. Relative Eciency (Luminous Inten-
sity per Unit Current) vs. Peak Current.
HDSP-52XE fig 2
I
F
– FORWARD CURRENT PER SEGMENT – mA
1
0
VF – FORWARD VOLTAGE – V
90
70
60
30
10
35
80
50
20
24
40
HER SERIES,
ORANGE
SERIES
GREEN SERIES
YELLOW SERIES
HDSP-52XE fig 3
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 10 mA)
0
0
IF – DC FORWARD CURRENT – mA
4.0
3.0
2.5
1.5
0.5
20 40
3.5
2.0
1.0
10 30
5 15 25 35
HER, YELLOW,
GREEN
HDSP-52XE fig 4
h
V
– RELATIVE EFFICIENCY
(NORMALIZED TO 1 AT 10 mA PER SEGMENT)
0
0.6
IPEAK – PEAK FORWARD CURRENT
PER SEGMENT – mA
9020 70 80 10
0
1.6
1.4
1.3
1.1
0.9
0.8
6050403010
HER SERIES,
ORANGE SERIES
GREEN SERIES
0.7
1.0
1.2
1.5
YELLOW SERIES
HER, Yellow, Green
Figure 7. Maximum Tolerable Peak Current vs. Pulse Duration – HER Figure 8. Maximum Tolerable Peak Current vs. Pulse Duration – Yel-
low.
HDSP-H15x
IV Bin Category Min. Max.
K 9.20 16.90
L 13.80 25.30
M 20.70 38.00
N 31.10 56.90
O 46.60 85.40
Intensity Bin Limits (mcd)
AlGaAs Red
HDSP-550x/552x
IV Bin Category Min. Max.
E 0.91 1.67
F 1.37 2.51
G 2.05 3.76
H 3.08 5.64
I 4.62 8.64
J 6.93 12.70
K 10.39 19.04
HER
HDSP-570x/572x
IV Bin Category Min. Max.
D 0.61 1.11
E 0.91 1.67
F 1.37 2.51
G 2.05 3.76
H 3.08 5.64
I 4.62 8.64
J 6.93 12.70
K 10.39 19.04
Yellow
HDSP-560x/562x
IV Bin Category Min. Max.
E 0.91 1.67
F 1.37 2.51
G 2.05 3.76
H 3.08 5.64
I 4.61 8.46
Green
Dominant Wavelength (nm)
Color Bin Min. Max.
Yellow 1 581.50 585.00
3 584.00 587.50
2 586.50 590.00
4 589.00 592.50
Green 2 573.00 577.00
3 570.00 574.00
4 567.00 571.00
5 564.00 568.00
Color Categories
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2015 Avago Technologies. All rights reserved. Obsoletes 5988-4273EN
AV02-1107EN - May 26, 2015
Electrical/Optical
For more information on electrical/optical characteristics,
please see Application Note 1005.
Contrast Enhancement
For information on contrast enhancement please see Ap-
plication Note 1015.
Soldering/Cleaning
Cleaning agents from the ketone family (acetone, methyl
ethyl ketone, etc.) and from the chlorinated hydrocarbon
family (methylene chloride, trichloro–ethylene, carbon
tetrachloride, etc.) are not recommended for cleaning LED
parts. All of these various solvents attack or dissolve the
encapsulating epoxies used to form the package of plastic
LED parts.
For information on soldering LEDs please refer to Ap-
plication Note 1027.
Note:
All categories are established for classication of products. Products
may not be available in all categories. Please contact your Avago repre-
sentatives for further clarication/information.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Avago Technologies:
HDSP-5501-GG000 HDSP-5503-GH000 HDSP-5601-GH000 HDSP-5607 HDSP-5621-GH000