74LCX86MTC - National Semiconductor

TL/F/12415

74LCX86 Low Voltage Quad 2-Input Exclusive-OR Gate with 5V Tolerant Inputs

December 1996

74LCX86

Low Voltage Quad 2-Input Exclusive-OR Gate

with 5V Tolerant Inputs

General Description

The LCX86 contains four 2-input exclusive-OR gates. The

inputs tolerate voltages up to 7V allowing the interface of 5V

systems to 3V systems.

The 74LCX86 is fabricated with advanced CMOS technolo-

gy to achieve high speed operation while maintaining CMOS

low power dissipation.

Features

Y5V tolerant inputs

Y6.5 ns tPD max, 10 mAI

CCQ max

YPower down high impedance inputs

Y2.0V–3.6V VCC supply operation

YSupports live insertion/withdrawal

Yg24 mA output drive

YImplements patented Quiet SeriesTM noise/EMI reduc-

tion circuitry

YFunctionally compatible with 74 series 86

YLatch-up performance exceeds 500 mA

YESD performance:

Human body model l2000V

Machine model l200V

Logic Symbol

IEEE/IEC

TL/F/12415–1

Connection Diagram

Pin Assignment

for SOIC and TSSOP

TL/F/12415– 2

Pin Names Description

A0–A3Inputs

B0–B3Inputs

O0–O3Outputs

SOIC JEDEC SOIC EIAJ TSSOP

Order Number 74LCX86M 74LCX86SJ 74LCX86MTC

74LCX86MX 74LCX86SJX 74LCX86MTCX

See NS Package Number M14A M14D MTC14

Quiet SeriesTM is a trademark of National Semiconductor Corporation.

C1996 National Semiconductor Corporation RRD-B30M17/Printed in U. S. A. http://www.national.com

Absolute Maximum Ratings (Note 1)

If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/

Distributors for availability and specifications.

Symbol Parameter Value Conditions Units

VCC Supply Voltage b0.5 to a7.0 V

VIDC Input Voltage b0.5 to a7.0 V

VODC Output Voltage b0.5 to VCC a0.5 Output in High or Low State (Note 2) V

IIK DC Input Diode Current b50 VIkGND mA

IOK DC Output Diode Current b50 VOkGND mA

a50 VOlVCC

IODC Output Source/Sink Current g50 mA

ICC DC Supply Current per Supply Pin g100 mA

IGND DC Ground Current per Ground Pin g100 mA

TSTG Storage Temperature b65 to a150 §C

Note 1: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these

limits. The parametric values defined in the ‘‘Electrical Characteristics’’ table are not guaranteed at the Absolute Maximum Ratings. The ‘‘Recommended Operating

Conditions’’ table will define the conditions for actual device operation.

Note 2: IOAbsolute Maximum Rating must be observed.

Recommended Operating Conditions

Symbol Parameter Min Max Units

VCC Supply Voltage Operating 2.0 3.6 V

Data Retention 1.5 3.6

VIInput Voltage 0 5.5 V

VOOutput Voltage HIGH or LOW State 0 VCC V

IOH/IOL Output Current VCC e3.0V– 3.6V g24 mA

VCC e2.7V g12

(TA) Free-Air Operating Temperature b40 85 §C

Dt/DV Input Edge Rate, VIN e0.8V– 2.0V, VCC e3.0V 0 10 ns/V

DC Electrical Characteristics

Symbol Parameter Conditions VCC TAeb

40§Ctoa

85§CUnits

(V) Min Max

VIH HIGH Level Input Voltage 2.7–3.6 2.0 V

VIL LOW Level Input Voltage 2.7–3.6 0.8 V

VOH HIGH Level Output Voltage IOH eb

100 mA 2.7–3.6 VCC b0.2 V

IOH eb

12 mA 2.7 2.2 V

IOH eb

18 mA 3.0 2.4 V

IOH eb

24 mA 3.0 2.2 V

VOL LOW Level Output Voltage IOL e100 mA 2.7–3.6 0.2 V

IOL e12 mA 2.7 0.4 V

IOL e16 mA 3.0 0.4 V

IOL e24 mA 3.0 0.55 V

IIInput Leakage Current 0 sVIs5.5V 2.7–3.6 g5.0 mA

IOFF Power-Off Leakage Current VIor VOe5.5V 0 10 mA

ICC Quiescent Supply Current VIeVCC or GND 2.7–3.6 10 mA

3.6V sVI,V

Os5.5V 2.7–3.6 g10 mA

DICC Increase in ICC per Input VIH eVCC b0.6V 2.7– 3.6 500 mA

http://www.national.com 2

AC Electrical Characteristics

Symbol Parameter

TAeb

40§Ctoa

85§C

Units

VCC e3.3V g0.3V VCC e2.7V

Min Max Min Max

tPHL Propagation Delay 1.5 6.5 1.5 7.0 ns

tPLH 1.5 6.5 1.5 7.0

tOSHL Output to Output Skew (Note 3) 1.0 ns

tOSLH 1.0

Note 3: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The

specification applies to any outputs switching in the same direction, either HIGH to LOW (tOSHL) or LOW to HIGH (tOSLH).

Dynamic Switching Characteristics

Symbol Parameter Conditions VCC

(V)

TAe25§CUnits

Typical

VOLP Quiet Output Dynamic Peak VOL CLe50 pF, VIH e3.3V, VIL e0V 3.3 0.8 V

VOLV Quiet Output Dynamic Valley VOL CLe50 pF, VIH e3.3V, VIL e0V 3.3 b0.8 V

Capacitance

Symbol Parameter Conditions Typical Units

CIN Input Capacitance VCC eOpen, VIe0V or VCC 7pF

OUT Output Capacitance VCC e3.3V, VIe0V or VCC 8pF

PD Power Dissipation Capacitance VCC e3.3V, VIe0V or VCC,Fe10 MHz 25 pF

74LCX86 Ordering Information

The device number is used to form part of a simplified purchasing code where the package type and temperature range are

defined as follows:

TL/F/12415– 3

http://www.national.com3

http://www.national.com 4

Physical Dimensions inches (millimeters) unless otherwise noted

14-Lead Small Outline Package JEDEC (M)

Order Number 74LCX86M or 74LCX86MX

NS Package Number M14A

14-Lead Small Outline Package EIAJ (SJ)

Order Number 74LCX86SJ or 74LCX86SJX

NS Package Number M14D

http://www.national.com5

74LCX86 Low Voltage Quad 2-Input Exclusive-OR Gate with 5V Tolerant Inputs

Physical Dimensions millimeters (Continued)

14-Lead Thin Shrink Small Outline Package (MTC)

Order Number 74LCX86MTC or 74LCX86MTCX

NS Package Number MTC14

LIFE SUPPORT POLICY

NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT

DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL

SEMICONDUCTOR CORPORATION. As used herein:

1. Life support devices or systems are devices or 2. A critical component is any component of a life

systems which, (a) are intended for surgical implant support device or system whose failure to perform can

into the body, or (b) support or sustain life, and whose be reasonably expected to cause the failure of the life

failure to perform, when properly used in accordance support device or system, or to affect its safety or

with instructions for use provided in the labeling, can effectiveness.

be reasonably expected to result in a significant injury

to the user.

National Semiconductor National Semiconductor National Semiconductor National Semiconductor

Corporation Europe Southeast Asia Japan Ltd.

Fax:

49 (0) 180-530 85 86 Fax: (852) 2376 3901 Tel: 81-3-5620-7561

Americas Email: europe.support

nsc.com Email: sea.support

nsc.com Fax: 81-3-5620-6179

Tel: 1(800) 272-9959 Deutsch Tel:

49 (0) 180-530 85 85

Fax: 1(800) 737-7018 English Tel:

49 (0) 180-532 78 32

Email: support

nsc.com Fran3ais Tel:

49 (0) 180-532 93 58

Italiano Tel:

49 (0) 180-534 16 80

http://www.national.com

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.