MM74HC04 — Hex Inverter
©1983 Fairchild Semiconductor Corporation www.fairchildsemi.com
MM74HC04 Rev. 1.3.0
February 2008
MM74HC04
Hex Inverter
Features
Typical propagation delay: 8ns
Fan out of 10 LS-TTL loads
Quiescent power consumption: 10µW maximum at
room temperature
Low input current: 1µA maximum
General Description
The MM74HC04 inverters utilize advanced silicon-gate
CMOS technology to achieve operating speeds similar to
LS-TTL gates with the low power consumption of stan-
dard CMOS integrated circuits.
The MM74HC04 is a triple buffered inverter. It has high
noise immunity and the ability to drive 10 LS-TTL loads.
The 74HC logic family is functionally as well as pin-out
compatible with the standard 74LS logic family. All inputs
are protected from damage due to static discharge by
internal diode clamps to V
CC
and ground.
Ordering Information
Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number.
All packages are lead free per JEDEC: J-STD-020B standard.
Connection Diagram
Pin Assignments for DIP, SOIC, SOP and TSSOP
Top View
Logic Diagram
1 of 6 Inverters
Order Number
Package
Number Package Description
MM74HC04M M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
MM74HC04SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
MM74HC04MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
MM74HC04N N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
©1983 Fairchild Semiconductor Corporation www.fairchildsemi.com
MM74HC04 Rev. 1.3.0 2
MM74HC04 — Hex Inverter
Absolute Maximum Ratings
(1)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Notes:
1. Unless otherwise specified all voltages are referenced to ground.
2. Power Dissipation temperature derating — plastic “N” package: –12mW/°C from 65°C to 85°C.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to absolute maximum ratings.
Symbol Parameter Rating
V
CC
Supply Voltage –0.5 to +7.0V
V
IN
DC Input Voltage –1.5 to V
CC
+1.5V
V
OUT
DC Output Voltage –0.5 to V
CC
+0.5V
I
IK
, I
OK
Clamp Diode Current ±20mA
I
OUT
DC Output Current, per pin ±25mA
I
CC
DC V
CC
or GND Current, per pin ±50mA
T
STG
Storage Temperature Range –65°C to +150°C
P
D
Power Dissipation
Note 2 600mW
S.O. Package only 500mW
T
L
Lead Temperature (Soldering 10 seconds) 260°C
Symbol Parameter Min. Max. Units
V
CC
Supply Voltage 2 6 V
V
IN
, V
OUT
DC Input or Output Voltage 0 V
CC
V
T
A
Operating Temperature Range –40 +85 °C
t
r
, t
f
Input Rise or Fall Times
V
CC
=
2.0V 1000 ns
V
CC
=
4.5V 500 ns
V
CC
=
6.0V 400 ns
©1983 Fairchild Semiconductor Corporation www.fairchildsemi.com
MM74HC04 Rev. 1.3.0 3
MM74HC04 — Hex Inverter
DC Electrical Characteristics
(3)
Note:
3. For a power supply of 5V ±10% the worst case output voltages (V
OH
, and V
OL
) occur for HC at 4.5V. Thus the 4.5V
values should be used when designing with this supply. Worst case V
IH
and V
IL
occur at V
CC
=
5.5V and 4.5V
respectively. (The V
IH
value at 5.5V is 3.85V.) The worst case leakage current (I
IN
, I
CC
, and I
OZ
) occur for CMOS at
the higher voltage and so the 6.0V values should be used.
Symbol Parameter V
CC
(V) Conditions
T
A
=
25°C
T
A
=
–40°C
to 85°C
T
A
=
–55°C
to 125°C
UnitsTyp. Guaranteed Limits
V
IH
Minimum HIGH Level
Input Voltage
2.0 1.5 1.5 1.5 V
4.5 3.15 3.15 3.15
6.0 4.2 4.2 4.2
V
IL
Maximum LOW Level
Input Voltage
2.0 0.5 0.5 0.5 V
4.5 1.35 1.35 1.35
6.0 1.8 1.8 1.8
V
OH
Minimum HIGH Level
Output Voltage
2.0 V
IN
=
V
IL
,
|I
OUT
|
20µA
2.0 1.9 1.9 1.9 V
4.5 4.5 4.4 4.4 4.4
6.0 6.0 5.9 5.9 5.9
4.5 V
IN
=
V
IL
,
|I
OUT
|
4.0mA
4.2 3.98 3.84 3.7
6.0 V
IN
=
V
IL
,
|I
OUT
|
5.2mA
5.7 5.48 5.34 5.2
V
OL
Maximum LOW Level
Output Voltage
2.0 V
IN
=
V
IH
,
|I
OUT
|
20µA
0 0.1 0.1 0.1 V
4.5 0 0.1 0.1 0.1
6.0 0 0.1 0.1 0.1
4.5 V
IN
=
V
IH
,
|I
OUT
|
4.0mA
0.2 0.26 0.33 0.4
6.0 V
IN
=
V
IH
,
|I
OUT
|
5.2mA
0.2 0.26 0.33 0.4
I
IN
Maximum Input
Current
6.0 V
IN
=
V
CC
or GND ±0.1 ±1.0 ±1.0 µA
I
CC
Maximum Quiescent
Supply Current
6.0 V
IN
=
V
CC
or GND,
I
OUT
=
0µA
2.0 20 40 µA
©1983 Fairchild Semiconductor Corporation www.fairchildsemi.com
MM74HC04 Rev. 1.3.0 4
MM74HC04 — Hex Inverter
AC Electrical Characteristics
V
CC
=
5V, T
A
=
25°C, C
L
=
15pF, t
r
=
t
f
=
6ns
AC Electrical Characteristics
V
CC
=
2.0V to 6.0V, C
L
=
50pF, t
r
=
t
f
=
6ns (unless otherwise specified)
Note:
4. C
PD
determines the no load dynamic power consumption, P
D
=
C
PD
V
CC2
f + I
CC
V
CC
, and the no load dynamic
current consumption, I
S
=
C
PD VCC f + ICC.
Symbol Parameter Conditions Typ.
Guaranteed
Limit Units
tPHL, tPLH Maximum Propagation Delay 8 15 ns
Symbol Parameter VCC (V) Conditions
TA = 25°C
TA = –40°C
to 85°C
TA = –55°C
to 125°C
UnitsTyp. Guaranteed Limits
tPHL, tPLH Maximum
Propagation Delay
2.0 55 95 120 145 ns
4.5 11 19 24 29
6.0 9 16 20 24
tTLH, tTHL Maximum Output
Rise and Fall Time
2.0 30 75 95 110 ns
4.5 8 15 19 22
6.0 7 13 16 19
CPD Power Dissipation
Capacitance(4) (per gate) 20 pF
CIN Maximum Input
Capacitance
510 10 10 pF
©1983 Fairchild Semiconductor Corporation www.fairchildsemi.com
MM74HC04 Rev. 1.3.0 5
MM74HC04 — Hex Inverter
Physical Dimensions
Figure 1. 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions,
specifically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
LAND PATTERN RECOMMENDATION
NOTES: UNLESS OTHERWISE SPECIFIED
A) THIS PACKAGE CONFORMS TO JEDEC
MS-012, VARIATION AB, ISSUE C,
B) ALL DIMENSIONS ARE IN MILLIMETERS.
C) DIMENSIONS DO NOT INCLUDE MOLD
FLASH OR BURRS.
D) LANDPATTERN STANDARD:
SOIC127P600X145-14M
E) DRAWING CONFORMS TO ASME Y14.5M-1994
F) DRAWING FILE NAME: M14AREV13
PIN ONE
INDICATOR
8°
0°
SEATING PLANE
DETAIL A
SCALE: 20:1
GAGE PLANE
0.25
X45°
1
0.10
C
C
BC A
7
M
14 B
A
8
SEE DETAIL A
5.60
0.65
1.70 1.27
8.75
8.50
7.62
6.00 4.00
3.80
(0.33)
1.27 0.51
0.35
1.75 MAX
1.50
1.25 0.25
0.10 0.25
0.19
(1.04)
0.90
0.50
0.36
R0.10
R0.10
0.50
0.25
©1983 Fairchild Semiconductor Corporation www.fairchildsemi.com
MM74HC04 Rev. 1.3.0 6
MM74HC04 — Hex Inverter
Physical Dimensions (Continued)
Figure 2. 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions,
specifically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
©1983 Fairchild Semiconductor Corporation www.fairchildsemi.com
MM74HC04 Rev. 1.3.0 7
MM74HC04 — Hex Inverter
Physical Dimensions (Continued)
Figure 3. 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions,
specifically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH,
AND TIE BAR EXTRUSIONS
F. DRAWING FILE NAME: MTC14REV6
R0.09 min
12.00°TOP & BOTTO
M
0.43 TYP
1.00
D. DIMENSIONING AND TOLERANCES PER ANSI
Y14.5M, 1982
R0.09min
E. LANDPATTERN STANDARD: SOP65P640X110-14M
0.65
6.10
1.65
0.45
A. CONFORMS TO JEDEC REGISTRATION MO-153,
VARIATION AB, REF NOTE 6
B. DIMENSIONS ARE IN MILLIMETERS
©1983 Fairchild Semiconductor Corporation www.fairchildsemi.com
MM74HC04 Rev. 1.3.0 8
MM74HC04 — Hex Inverter
Physical Dimensions (Continued)
Figure 4. 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions,
specifically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
14 8
7
1
NOTES: UNLESS OTHERWISE SPECIFIED
A) THIS PACKAGE CONFORMS TO
JEDEC MS-001 VARIATION BA
B) ALL DIMENSIONS ARE IN MILLIMETERS.
C) DIMENSIONS ARE EXCLUSIVE OF BURRS,
MOLD FLASH, AND TIE BAR EXTRUSIONS.
D) DIMENSIONS AND TOLERANCES PER
ASME Y14.5-1994
E) DRAWING FILE NAME: MKT-N14AREV7
6.60
6.09
8.12
7.62
0.35
0.20
19.56
18.80
3.56
3.30 5.33 MAX
0.38 MIN
1.77
1.14
0.58
0.35 2.54
3.81
3.17 8.82
(1.74)
©1983 Fairchild Semiconductor Corporation www.fairchildsemi.com
MM74HC04 Rev. 1.3.0 9
TRADEMARKS
Thefollowing includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global
subsidiaries, and is not intended to be an exhaustive list of all such trademarks.
ACEx®
Build it Now
CorePLUS™
CROSSVOLT
CTL™
Current Transfer Logic™
EcoSPARK®
EZSWITCH™ *
®
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series™
FACT®
FAST®
FastvCore™
FlashWriter®*
FPS™
FRFET®
Global Power ResourceSM
Green FPS™
Green FPS™e-Series
GTO™
i-Lo
IntelliMAX™
ISOPLANAR™
MegaBuck™
MICROCOUPLER™
MicroFET
MicroPak
MillerDrive™
Motion-SPM™
OPTOLOGIC®
OPTOPLANAR®
®
PDP-SPM
Power220®
POWEREDGE®
Power-SPM
PowerTrench®
Programmable Active Droop™
QFET®
QS™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
SMART START™
SPM®
STEALTH™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SupreMOS™
SyncFET™®
The Power Franchise®
TinyBoost™
TinyBuck™
TinyLogic®
TINYOPTO™
TinyPower™
TinyPWM™
TinyWire™
µSerDes™
UHC®
Ultra FRFET™
UniFET™
VCX
*EZSWITCH™ and FlashWriter®are trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS
HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE
APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS
PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S
WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR
SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body or
(b) support or sustain life, and (c) whose failure to perform
when properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to
result in a significant injury of the user.
2. A critical component in any component of a life support,
device, or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information Formative or In Design This datasheet contains the design specifications for product
development. Specifications may change in any manner without notice.
Preliminary First Production
This datasheet contains preliminary data; supplementary data will be
published at a later date. Fairchild Semiconductor reserves the right to
make changes at any time without notice to improve design.
No Identification Needed Full Production
This datasheet contains final specifications. Fairchild Semiconductor
reserves the right to make changes at any time without notice to improve
the design.
Obsolete Not In Production
This datasheet contains specifications on a product that has been
discontinued by Fairchild Semiconductor. The datasheet is printed for
reference information only.
Rev. I33
MM74HC04 — Hex Inverter