High Power to volume
Wound to maximise High Pulse Capability
Values from R005 to 100K
Custom designs welcome
RoHS Compliant
HS Aluminium Housed Resistors
The information contained herein does not form part of
a contract and is subject to change without notice. Arcol
operate a policy of continual product development, therefore,
specifications may change.
It is the responsibility of the customer to ensure that the component
selected from our range is suitable for the intended application. If in
doubt please ask Arcol.
ARCOL UK Limited,
Threemilestone Ind. Estate,
Truro, Cornwall, TR4 9LG, UK.
T +44 (0) 1872 277431
F +44 (0) 1872 222002
E sales@arcolresistors.com
www.arcolresistors.
Characteristics
Tolerance (Code):
Tolerance for low Ω values:
Temperature coefficients:
Insulation resistance (Dry):
Power dissipation:
Ohmic values:
Low inductive (NHS):
NHS ohmic value:
NHS working volts:
Standard ±5% (J) and ±10% (K). Also available ±1% (F), ±2% (G) and ±3% (H)
Typically ≥ R05 ±5% ≤ R047 ±10%
Typical values < 1K 100ppm Std. > 1K 25ppm Std. For lower TCRs please contact Arcol
10,000 MΩ minimum
At high ambient temperature dissipation derates linearly to zero at 200°C
From R005 to 100K depending on wattage size
Specify by adding N before HS Series code, e.g. NHS50
Divide standard HS maximum value by 4
Divide standard HS maximum working voltage by 1.414
Page 1 of 2 11/ 12.31
Temp. Rise & Power Dissipation
Manufactured in line with the requirements of MIL
18546 and IEC 115, designed for direct heatsink
mounting with thermal compound to achieve maximum
performance.
Heat Dissipation
Surface temperature of resistor related to power dissipation.
The resistor is standard heatsink mounted using a proprietary
heatsink compound.
Heat dissipation: Whilst the use of proprietary heat sinks
with lower thermal resistances is acceptable, uprating is not
recommended. For maximum heat transfer it is recommended
that a heat sink compound be applied between the resistor
base and heat sink chassis mounting surface. It is essential that
the maximum hot spot temperature of 20C is not exceeded,
therefore, the resistor must be mounted on a heat sink of
correct thermal resistance for the power being dissipated.
Ordering Procedure
Standard Resistor. To specify standard: Series, Watts, Ohmic
Value, Tolerance Code, e.g.: HS25 2R2 J
Non Inductive Resistor. To specify add N, e.g.: NHS100 10R J
HS300
HS250
HS200
HS150
HS50
HS75
HS25
HS15
HS10
HS100
0 20 50 75 100 150 200 250 300
POWER DISSIPATION (WATTS)
200
100
5
SURFACE TEMPERATURE RISE(˚C)
HS Aluminium Housed Resistors
HS10-HS300 Standard
Dimensions (mm)
Size A Max B Max C Max D Max E Max F±0.3 G±0.3 H Max J Max K Max L ±0.25* M Max
HS10 16.5 30.0 8.8 8.5 15.9 11. 3 12.4 4.5 2.4 1. 8 2.4
HS15 21.0 36.5 11. 0 11. 2 19.9 14.3 15.9 5.5 2.8 1. 8 2.4
HS25 28.0 51.0 14.6 14.0 27.3 18.3 19.8 7. 3 4.7 2.6 3.2
HS50 29.7 72.5 14.8 14.2 49.1 39.7 21.4 8.5 5.2 2.6 3.2
HS75 47.5 72.0 24.1 27.3 48.7 29.0 37.0 11. 8 10.4 3.7 4.4
HS100 47.5 88.0 24.1 27.3 65.2 35.0 37.0 11. 8 15.4 3.7 4.4
HS150 47.5 121.0 24.1 27.3 97.7 58.0 37.0 11. 8 20.4 3.7 4.4
HS200 72.5 145.7 41.8 45.5 89.7 70.0 57.2 20.5 10.4 5.5 5.1 103.4
HS250 72.5 167.0 41.8 45.5 109.7 89.0 57.2 20.5 10.4 5.5 5.1 122.4
HS300 72.5 184.4 41.8 45.5 127.7 104.0 59.0 20.5 12.4 5.5 6.6 141.4
* HS200-HS300 Watts is ± 0.45
Electrical Specifications
Size
Style
MIL-R
18546
Power
rating
on std.
heatsink
@25°C
Watts
with no
heatsink
@25°C
Resis-
tance
range
Limiting
element
voltage
Voltage
proof AC
Peak
Voltage
proof AC
rms.
Approx
weight
gms
Typical
surface
rise HS
mounted
Standard heatsink
cm2Thickness
mm
HS10 RE 60 10 5 R005-10K 160 1400 1000 4 5.8 415 1
HS15 RE 65 15 7 R005-10K 265 1400 1000 7 5.1 415 1
HS25 RE 70 25 9 R005-36K 550 3500 2500 14 4.2 535 1
HS50 RE 75 50 14 R01-86K 1250 3500 2500 32 3.0 535 1
HS75 75 24 R01-50K 1400 6363 4500 85 1. 1 995 3
HS100 100 30 R01-70K 1900 6363 4500 115 1. 0 995 3
HS150 150 45 R01-100K 2500 6363 4500 175 1. 0 995 3
HS200 200 50 R01-50K 1900 7070 5000 475 0.7 3750 3
HS250 250 55 R01-50K 2200 7070 5000 600 0.6 4765 3
HS300 300 60 R01-68K 2500 7070 5000 700 0.6 5780 3
Page 2 of 2 11 / 12.31
HS 200, 250, 300
6mm
AG
J
L
F
B
Ø 2.0
±
0.25
2. 0.1
HS 10, 15, 25, 50
D
H
K
C
HS 75, 100, 150
=
Ø 3.2
max.
3.0 ±
0.1
*
=
Centre hole in
150 Watts only
E
B
F
J
L
A
==
B
F
EE
M
J
L
A
D
H
K
C
D
H
K
C
GG
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Arcol:
HS250 50R 1% HS200 4R4 5% HS100 0R5 5% HS100 0R1 5% HS250 560R 1% HS50 5R0 1% HS10 5R0 1%
HS50 150R 1% HS25 68R 1% HS10 150R 1% HS25 15R 1% HS25 1K0 1% HS10 2R7 1% HS50 2R7 1% HS50
47R 1% HS250 2K7 1% HS50 40R 1% HS50 2K2 1% HS25 8R0 1% HS15 8R0 1% HS10 2K2 1% HS15 3K3 1%
HS10 3K3 1% HS200 2R7 1% HS250 2R7 1% HS100 2R7 1% HS50 250R 1% HS10 250R 1% HS50 51R1 1%
HS50 3K3 1% HS25 3K3 1% HS300 2R7 1% HS50 51R5 1% HS50 25K 1% HS50 56R 1% HS200 3K3 1% HS10
560R 1% HS50 560R 1% HS100 0R47 5% HS300 1K5 1% HS25 10K 1% HS15 10K 1% HS250 40R 1% HS300
680R 1% HS300 7R5 1% HS200 7R5 1% HS250 680R 1% HS100 0R22 5% HS100 0R33 5% HS100 0R56 5%
HS100 680R 1% HS100 0R51 5% HS250 75R 1% HS250 7R5 1% HS100 0R15 5% HS100 1K5 1% HS100 0R82
5% HS100 0R68 5% HS200 680R 1% HS100 0R27 5% HS100 7R5 1% HS50 50K 1% HS200 220R 1% NHS100
10R 1% HS100 300R 1% HS15 40R 1% HS250 220R 1% NHS300 10R 5% HS300 220R 1% NHS300 11R 5%
NHS100 15R 1% HS75 10R 5% HS100 220R 1% HS15 56R 1% HS10 1R0 1% HS50 1R0 1% HS10 1R5 1%
HS50 1R5 1% HS15 50R 1% HS100 8R0 1% HS250 8R0 1% HS200 8R0 1% HS300 8R0 1% HS10 500R 1%
HS200 0R33 1% HS50 500R 1% HS75 680R F HS75 5R0 F HS75 68R F HS75 2R0 F HS75 2R2 F HS75 2R7 F
HS75 0R1 J HS75 27R F HS75 25R F HS75 22R F HS75 220R F HS75 20R F HS150 8R0 F HS150 22R F