TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
D
Rail-to-Rail Output Swing
D
Gain Bandwidth Product . . . 6.4 MHz
D
±80 mA Output Drive Capability
D
Supply Current . . . 500 µA/channel
D
Input Offset Voltage . . . 100 µV
D
Input Noise Voltage ...11 nV/√Hz
D
Slew Rate . . . 1.6 V/µs
D
Micropower Shutdown Mode
(TLV2460/3/5) . . . 0.3 µA/Channel
D
Universal Operational Amplifier EVM
D
Available in Q-Temp Automotive
HighRel Automotive Applications
Configuration Control/Print Support
Qualification to Automotive Standards
description
The TLV246x is a family of low-power rail-to-rail input/output operational amplifiers specifically designed for
portable applications. The input common-mode voltage range extends beyond the supply rails for maximum
dynamic range in low-voltage systems. The amplifier output has rail-to-rail performance with high-output-drive
capability, solving one of the limitations of older rail-to-rail input/output operational amplifiers. This rail-to-rail
dynamic range and high output drive make the TLV246x ideal for buffering analog-to-digital converters.
The operational amplifier has 6.4 MHz of bandwidth and 1.6 V/µs of slew rate with only 500 µA of supply current,
providing good ac performance with low power consumption. Three members of the family offer a shutdown
terminal, which places the amplifier in an ultralow supply current mode (IDD = 0.3 µA/ch). While in shutdown,
the operational-amplifier output is placed in a high-impedance state. DC applications are also well served with
an input noise voltage of 11 nV/√Hz and input offset voltage of 100 µV.
This family is available in the low-profile SOT23, MSOP, and TSSOP packages. The TLV2460 is the first
rail-to-rail input/output operational amplifier with shutdown available in the 6-pin SOT23, making it perfect for
high-density circuits. The family is specified over an expanded temperature range (TA = –40°C to 125°C) for
use in industrial control and automotive systems, and over the military temperature range
(TA = –55°C to 125°C) for use in military systems.
SELECTION GUIDE
DEVICE VDD
[V] VIO
[µV] IDD/ch
[µA] IIB
[pA] GBW
[MHz] SLEW RATE
[V/µs] Vn, 1 kHz
[nV/√Hz]IO
[mA] SHUTDOWN RAIL-RAIL
TLV246x(A) 2.7–6 150 550 1300 6.4 1.6 11 25 Y I/O
TLV277x(A) 2.5–5.5 360 1000 2 5.1 10.5 17 6 Y O
TLV247x(A) 2.7–6 250 600 2.5 2.8 1.5 15 20 Y I/O
TLV245x(A) 2.7–6 20 23 500 0.22 0.11 52 10 Y I/O
TLV225x(A) 2.7–8 200 35 1 0.2 0.12 19 3 — —
TLV226x(A) 2.7–8 300 200 1 0.71 0.55 12 3 — —
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright 2001, Texas Instruments Incorporated
3
2
4
6
(TOP VIEW)
1
OUT
GND
IN+
VDD+
IN–
TLV2460
DBV PACKAGE
5SHDN
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
2POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV2460C/I/AI and TLV2461C/I/AI AVAILABLE OPTIONS
V max
PACKAGED DEVICES
TA
V
IOmax
AT 25°CSMALL OUTLINE
(D) SOT-23†
(DBV) SYMBOL PLASTIC DIP
(P)
0°C to 70°C 2000 µVTLV2460CD
TLV2461CD TLV2460CDBV
TLV2461CDBV VAOC
VAPC TLV2460CP
TLV2461CP
–40
°
Cto125
°
C
2000 µVTLV2460ID
TLV2461ID TLV2460IDBV
TLV2461IDBV VAOI
VAPI TLV2460IP
TLV2461IP
–
40°C
to
125°C
1500 µVTLV2460AID
TLV2461AID —
——
—TLV2460AIP
TLV2461AIP
†This package is available taped and reeled. To order this packaging option, add an R suf fix to the part number (e.g., TLV2460CDR).
‡Chip forms are tested at TA = 25°C only.
TLV2460M/AM/Q/AQ and TL V2461M/AM/Q/AQ AVAILABLE OPTIONS
PACKAGED DEVICES
TAVIOmax
AT 25°CSMALL
OUTLINE†
(D)
SMALL
OUTLINE†
(PW)
CERAMIC DIP
(JG)
CERAMIC
FLATPACK
(U)
CHIP CARRIER
(FK)
–40
°
Cto125
°
C
2000 µVTLV2460QD
TLV2461QD TLV2460QPW
TLV2461QPW —
——
——
—
–
40°C
to
125°C
1500 µVTLV2460AQD
TLV2461AQD TLV2460AQPW
TLV2461AQPW —
——
——
—
55
°
Cto125
°
C
2000 µV—
——
—TLV2460MJG
TLV2461MJG TLV2460MU
TLV2461MU TLV2460MFK
TLV2461MFK
–
55°C
to
125°C
1500 µV—
——
—TLV2460AMJG
TLV2461AMJG TLV2460AMU
TLV2461AMU TLV2460AMFK
TLV2461AMFK
†This package is available taped and reeled. To order this packaging option, add an R suf fix to the part number (e.g., TLV2460QDR).
TLV2462C/I/AI and TLV2463C/I/AI AVAILABLE OPTIONS
PACKAGED DEVICES
TAVIOmax
AT 25°CSMALL
OUTLINE†
(D)
MSOP
(DGK) SYMBOL MSOP†
(DGS) SYMBOL PLASTIC DIP
(N) PLASTIC DIP
(P)
0°C to 70°C 2000 µVTLV2462CD
TLV2463CD TLV2462CDGK
—xxTIAAI —
TLV2463CDGS —
xxTIAAK —
TLV2463CN TLV2462CP
—
–40°C to 2000 µVTLV2462ID
TLV2463ID TLV2462IDGK
—xxTIAAJ —
TLV2463IDGS —
xxTIAAL —
TLV2463IN TLV2462IP
—
125°C1500 µVTLV2462AID
TLV2463AID —
——
——
——
——
TLV2463AIN TLV2462AIP
—
†This package is available taped and reeled. To order this packaging option, add an R suf fix to the part number (e.g., TLV2462CDR).
‡Chip forms are tested at TA = 25°C only.
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV2462M/AM/Q/AQ and TLV2463M/AM/Q/AQ AVAILABLE OPTIONS
PACKAGED DEVICES
TAVIOmax
AT 25°CSMALL
OUTLINE†
(D)
SMALL
OUTLINE†
(PW)
CERAMIC DIP
(JG)
CERAMIC
DIP
(J)
CERAMIC
FLATPACK
(U)
CHIP CAR-
RIER
(FK)
–40
°
Cto125
°
C
2000 µVTLV2462QD
TLV2463QD TLV2462QPW
TLV2463QPW —
——
——
——
—
–
40°C
to
125°C
1500 µVTLV2462AQD
TLV2463AQD TLV2462AQPW
TLV2463AQPW —
——
——
——
—
55°Cto125°C
2000 µV—
——
—TLV2462MJG
——
TLV2463MJ TLV2462MU TLV2462MFK
TLV2463MFK
–
55°C
to
125°C
1500 µV—
——
—TLV2462AMJG
——
TLV2463AMJ TLV2462AMU TLV2462AMFK
TLV2463AMFK
†This package is available taped and reeled. To order this packaging option, add an R suf fix to the part number (e.g., TLV2462QDR).
TLV2464C/I/AI and TL V2465C/I/AI AVAILABLE OPTIONS
Vma
PACKAGED DEVICES
TA
V
IOmax
AT 25°CSMALL OUTLINE
(D) PLASTIC DIP
(N) TSSOP
(PW)
0°C to 70°C 2000 µVTLV2464CD
TLV2465CD TLV2464CN
TLV2465CN TLV2464CPW
TLV2465CPW
–40
°
Cto125
°
C
2000 µVTLV2464ID
TLV2465ID TLV2464IN
TLV2465IN TLV2464IPW
TLV2465IPW
–
40°C
to
125°C
1500 µVTLV2464AID
TLV2465AID TLV2464AIN
TLV2465AIN TLV2464AIPW
TLV2465AIPW
†This package is available taped and reeled. To order this packaging option, add an R suffix to the part
number(e.g., TLV2464CDR).
‡Chip forms are tested at TA = 25°C only.
TLV2464M/AM/Q/AQ and TL V2465M/AM/Q/AQ AVAILABLE OPTIONS
PACKAGED DEVICES
TAVIOmax
AT 25°CSMALL
OUTLINE†
(D)
SMALL
OUTLINE†
(PW)
CERAMIC DIP
(J) CHIP CARRIER
(FK)
-40
°
Cto125
°
C
2000 µVTLV2464QD
TLV2465QD TLV2464QPW
TLV2465QPW —
——
—
-
40°C
to
125°C
1500 µVTLV2464AQD
TLV2465AQD TLV2464AQPW
TLV2465AQPW —
——
—
55
°
Cto125
°
C
2000 µV—
——
—TLV2464MJ
TLV2465MJ TLV2464MFK
TLV2465MFK
–
55°C
to
125°C
1500 µV—
——
—TLV2464AMJ
TLV2465AMJ TLV2464AMFK
TLV2465AMFK
†This package is available taped and reeled. To order this packaging option, add an R suffix to the part number
(e.g., TLV2464QDR).
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
4POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV246x PACKAGE PINOUTS
1
2
3
4
5
10
9
8
7
6
1OUT
1IN–
1IN+
GND
1SHDN
VDD+
2OUT
2IN–
2IN+
2SHDN
3
2
4
5
(TOP VIEW)
1
OUT
GND
IN+
VDD+
IN–
TLV2461
DBV PACKAGE
3
2
4
6
(TOP VIEW)
1
OUT
GND
IN+
VDD+
IN–
TLV2460
DBV PACKAGE
5SHDN
TLV2463
DGS PACKAGE
(TOP VIEW)
NC – No internal connection
1
2
3
4
5
6
7
14
13
12
11
10
9
8
1OUT
1IN–
1IN+
GND
NC
1SHDN
NC
VDD+
2OUT
2IN–
2IN+
NC
2SHDN
NC
(TOP VIEW)
TLV2463
D, N, J, OR PW PACKAGE
1
2
3
4
5
6
7
14
13
12
11
10
9
8
1OUT
1IN–
1IN+
VDD+
2IN+
2IN–
2OUT
4OUT
4IN–
4IN+
GND
3IN+
3IN–
3OUT
(TOP VIEW)
TLV2464
D, N, PWP, J, OR PW PACKAGE
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
1OUT
1IN–
1IN+
VDD+
2IN+
2IN–
2OUT
1/2SHDN
4OUT
4IN–
4IN+
GND
3IN+
3IN–
3OUT
3/4SHDN
(TOP VIEW)
TLV2465
D, N, PWP, J, OR PW PACKAGE
1
2
3
4
8
7
6
5
1OUT
1IN–
1IN+
GND
VDD+
2OUT
2IN–
2IN+
TLV2462
D, DGK, P, JG, OR PW PACKAGE
(TOP VIEW)
1
2
3
4
8
7
6
5
NC
IN–
IN+
GND
SHDN
VDD+
OUT
NC
TLV2460
D, P, JG, OR PW PACKAGE
(TOP VIEW)
1
2
3
4
8
7
6
5
NC
IN–
IN+
GND
NC
VDD+
OUT
NC
TLV2461
D, P, JG, OR PW PACKAGE
(TOP VIEW)
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV246x PACKAGE PINOUTS (continued)
NC – No internal connection
1
2
3
4
5
10
9
8
7
6
NC
NC
IN–
IN+
GND
NC
SHDN
VDD
OUTPUT
NC
TLV2460
U PACKAGE
(TOP VIEW)
1
2
3
4
5
10
9
8
7
6
NC
1OUT
1IN–
1IN+
GND
NC
VDD+
2OUT
2IN–
2IN+
TLV2462
U PACKAGE
(TOP VIEW)
1
2
3
4
5
10
9
8
7
6
NC
NC
IN–
IN+
GND
NC
NC
VDD
OUTPUT
NC
TLV2461
U PACKAGE
(TOP VIEW)
1920132
17
18
16
15
14
1312119 10
5
4
6
7
8
NC
VDD
NC
OUT
NC
NC
IN–
NC
IN+
NC
NC
NC
NC
SHDN
NC
GND
NC
NC
NC
NC
TLV2460
FK PACKAGE
(TOP VIEW)
1920132
17
18
16
15
14
1312119 10
5
4
6
7
8
NC
VDD
NC
OUT
NC
NC
IN–
NC
IN+
NC
NC
NC
NC
NC
NC
GND
NC
NC
NC
NC
TLV2461
FK PACKAGE
(TOP VIEW)
1920132
17
18
16
15
14
1312119 10
5
4
6
7
8
2IN–
NC
2IN+
NC
NC
1IN+
NC
GND
NC
NC
1IN–
1OUT
NC
V
2OUT
NC
NC
NC
NC
NC
TLV2462
FK PACKAGE
(TOP VIEW)
DD
1920132
17
18
16
15
14
1312119 10
5
4
6
7
8
2IN–
NC
2IN+
NC
NC
1IN+
NC
GND
NC
NC
1IN–
1OUT
NC
V
2OUT
NC
NC
NC
2SHDN
1SHDN
TLV2463
FK PACKAGE
(TOP VIEW)
DD
TLV2464
FK PACKAGE
(TOP VIEW)
1920132
17
18
16
15
14
1312119 10
5
4
6
7
8
4IN+
NC
GND
NC
3IN+
1IN+
NC
VDD+
NC
2IN+
1IN–
1OUT
NC
4OUT
4IN–
2OUT
NC
3OUT
3IN–
2IN–
1920132
17
18
16
15
14
1312119 10
5
4
6
7
8
4IN+
GND
NC
3IN+
3IN–
1IN+
VDD+
NC
2IN+
2IN–
1IN–
1OUT
NC
4OUT
4IN–
1/2SHDN
NC
3/4SHDN
3OUT
2OUT
TLV2465
FK PACKAGE
(TOP VIEW)
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
6POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VDD (see Note 1) 6 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Differential input voltage, VID – 0.2 V to VDD + 0.2 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input current, II (any input) ± 200 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output current, IO ± 175 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Total input current, II (into VDD+) 175 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Total output current, IO (out of GND) 175 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous total power dissipation See Dissipation Rating Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating free-air temperature range, TA: C suffix 0°C to 70°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I and Q suffix –40°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
M suffix –55°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum junction temperature, TJ 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, Tstg –65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
†Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only , and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may af fect device reliability.
NOTE 1: All voltage values, except differential voltages, are with respect to GND.
DISSIPATION RATING TABLE FOR C and I SUFFIX
PACKAGE
θ
JC
θ
JA
T
A
≤ 25°C T
A
< 125°C
PACKAGE
JC
(°C/W)
JA
(°C/W)
A
POWER RATING
A
POWER RATING
D (8) 38.3 176 710 mW 142 mW
D (14) 26.9 122.6 1022 mW 204.4 mW
D (16) 25.7 114.7 1090 mW 218 mW
DBV (5) 55 324.1 385 mW 77.1 mW
DBV (6) 55 294.3 425 mW 84.9 mW
DGK 54.2 259.9 481 mW 96.2 mW
DGS 54.1 257.7 485 mW 97 mW
N (14, 16) 32 78 1600 mW 320.5 mW
P (8) 41 104 1200 mW 240.4 mW
PW (14) 29.3 173.6 720 mW 144 mW
PW (16) 28.7 161.4 774 mW 154.9 mW
NOTE: Thermal resistances are not production tested and are for informational
purposes only.
DISSIPATION RATING TABLE FOR Q and M SUFFIX
T
A
≤ 25°CDERATING F ACTOR T
A
= 70°C T
A
= 85°C T
A
= 125°C
A
POWER RATING ABOVE TA = 25°C‡
A
POWER RATING
A
POWER RATING
A
POWER RATING
FK 1375 mW 11.0 mW/°C880 mW 715 mW 275 mW
JG 1050 mW 8.4 mW/°C 672 mW 546 mW 210 mW
U675 mW 5.4 mW/°C432 mW 350 mW 135 mW
‡This is the inverse of the traditional junction-to-ambient thermal resistance (RΘJA). Thermal resistances are not production tested and are for
informational purposes only.
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
7
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
recommended operating conditions
MIN MAX UNIT
Su
pp
ly voltage VDD
Single supply 2.7 6
V
Supply
voltage
,
V
DD Split supply ±1.35 ±3
V
Common-mode input voltage range, VICR –0.2 VDD+0.2 V
C-suffix 0 70
Operating free-air temperature, TAI-suffix and Q-suffix –40 125 °C
M-suffix –55 125
Shutdown on/off voltage level‡
VIH 2
V
Shutdown
on/off
voltage
level‡
VIL 0.7
V
‡Relative to voltage on the GND terminal of the device.
electrical characteristics at specified free-air temperature, VDD = 3 V (unless otherwise noted)
PARAMETER TEST CONDITIONS TA†MIN TYP MAX UNIT
25°C 100 2000
VIO
In
p
ut offset voltage
VDD = 3 V,
V15V
Full range 2200
µV
V
IO
Input
offset
voltage
V
IC =
1
.
5
V
,
VO=15V
TLV246xA
25°C 150 1500 µ
V
VO
=
1
.
5
V
,
R
S
= 50 Ω
TLV246xA
Full range 1700
αVIO Temperature coefficient of input offset voltage
RS
50
Ω
2µV/°C
25°C 2.8 7
IIO Input offset current
VDD
=
3V,
TLV246xC Full range 20 nA
VDD
=
3
V
,
VIC = 1.5 V, TLV246xI/Q/M Full range 75
IC
VO = 1.5 V, 25°C 4.4 14
IIB Input bias current RS = 50 ΩTLV246xC Full range 25 nA
TLV246xI/Q/M Full range 75
IOH =25mA
25°C 2.9
VOH
High level out
p
ut voltage
I
OH = –
2
.
5
mA
Full range 2.8
V
V
OH
High
-
level
output
voltage
IOH = 10 mA
25°C 2.7
V
I
OH = –
10
mA
Full range 2.5
VIC =15V
IOL =25mA
25°C 0.1
VOL
Low level out
p
ut voltage
V
IC =
1
.
5
V
,
I
OL =
2
.
5
mA
Full range 0.2
V
V
OL
Low
-
level
output
voltage
VIC =15V
IOL =10mA
25°C 0.3
V
V
IC =
1
.
5
V
,
I
OL =
10
mA
Full range 0.5
Sourcing
25°C 50
IOS
Short circuit out
p
ut current
Sourcing
Full range 20
mA
I
OS
Short
-
circuit
output
current
Sinking
25°C 40
mA
Sinking
Full range 20
IOOutput current Measured 1 V from rail 25°C±40 mA
AVD
Lar
g
e-si
g
nal differential volta
g
e
RL=10kΩ
25°C 90 105
dB
A
VD
gg g
amplification
R
L =
10
kΩ
Full range 89
dB
ri(d) Differential input resistance 25°C 109Ω
†Full range is 0°C to 70°C for the C suffix, –40°C to 125°C for the I and Q suffixes, and –55°C to 125°C for the M suffix.
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
8POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
electrical characteristics at specified free-air temperature, VDD = 3 V (unless otherwise noted)
(continued)
PARAMETER TEST CONDITIONS TA†MIN TYP MAX UNIT
ci(c) Common-mode input
capacitance f = 10 kHz 25°C 7 pF
zoClosed-loop output impedance f = 100 kHz, AV = 10 25°C 33 Ω
V02Vt 32V
25°C 66 80
CMRR Common-mode rejection ratio VICR = –0.2 V to 3.2 V,
RS=50Ω
TLV246xC Full range 64 dB
RS
=
50 Ω
TLV246xI/Q/M Full range 60
V
DD
= 2.7 V to 6 V, V
= V
/2, 25°C 80 85
kSVR
Suppl
y
volta
g
e rejection ratio
DD ,
No load
Full range 75
dB
k
SVR
ygj
(∆VDD /∆VIO)V
DD
= 3 V to 5 V, V
= V
/2, 25°C 85 95
dB
DD ,
No load
Full range 80
IDD
Su
pp
ly current (
p
er channels)
VO=15V
25°C 0.5 0.575
mA
I
DD
Supply
current
(per
channels)
V
O =
1
.
5
V
,
Full range 0.9
mA
IDD(SHDN)
Suppl
y
current in shutdown SHDN < 0.7 V, 25°C 0.3
µA
I
DD(SHDN)
y
(TLV2460, TL V2463, TLV2465)
,
Per channel in shutdown Full range 2.5 µ
A
†Full range is 0°C to 70°C for the C suffix, –40°C to 125°C for the I and Q suffixes, and –55°C to 125°C for the M suffix.
operating characteristics at specified free-air temperature, VDD = 3 V (unless otherwise noted)
PARAMETER TEST CONDITIONS TA†MIN TYP MAX UNIT
VO(PP) =2V
CL= 160
p
F
25°C1 1.6
SR Slew rate at unity gain
V
O(PP) =
2
V
,
RL = 10 kΩ
C
L =
160
pF
,Full
range 0.8 V/µs
V
Equivalent in
p
ut noise voltage
f = 100 Hz 25°C 16
nV/√Hz
V
n
Equivalent
input
noise
voltage
f = 1 kHz 25°C11 n
V/√H
z
InEquivalent input noise current f = 1 kHz 25°C 0.13 pA/√Hz
T t l h i di t ti l
V2V
AV = 1 0.006%
THD + N Total harmonic distortion plus
noise
VO(PP) = 2 V,
RL=10kΩf=1kHz
AV = 10 25°C0.02%
noise
RL
=
10
kΩ
,
f
=
1
kHz
AV = 100 0.08%
Both channels 7.6
t(on) Amplifier turnon time AV = 1, RL = 10 kΩChannel 1 only,
Channel 2 on 25°C7.65 µs
Both channels 333
t
(
off
)
Amplifier turnoff time A V = 1, RL = 10 kΩChannel 1 only,
Channel 2 on 25°C328 ns
()
Channel 2 only,
Channel 1 on 329
Gain-bandwidth product f = 10 kHz, CL = 160 pF RL = 10 kΩ,25°C 5.2 MHz
V(STEP)PP = 2 V,
AV1C
L10
p
F
0.1% 1.47
t
Settling time
A
V = –
1
,
C
L =
10
p
F
,
RL = 10 kΩ0.01%
25°C
1.78
µs
t
s
Settling
time
V(STEP)PP = 2 V,
AV1C
L56
p
F
0.1%
25°C
1.77 µ
s
A
V = –
1
,
C
L =
56
p
F
,
RL = 10 kΩ0.01% 1.98
φmPhase margin at unity gain
RL=10kΩ
CL= 160
p
F
25°C 44°
Gain margin
R
L =
10
kΩ
,
C
L =
160
pF
25°C 7 dB
†Full range is 0°C to 70°C for the C suffix, –40°C to 125°C for the I and Q suffixes, and –55°C to 125°C for the M suffix.
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
9
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted)
PARAMETER TEST CONDITIONS TA†MIN TYP MAX UNIT
25°C 150 2000
VIO
In
p
ut offset voltage
V
DD
= 5 V
,
Full range 2200
µV
V
IO
Input
offset
voltage
VDD
5
V,
VIC = 2.5,
TLV246xA
25°C 150 1500 µ
V
VO = 2.5 V,
R50Ω
TLV246xA
Full range 1700
αVIO
Temperature coefficient of input offset RS = 50 Ω
25°C
2
µV/°C
αVIO voltage
25°C
2
µ
V/°C
25°C 0.3 7
IIO Input offset current
VDD
=
5V,
TLV246xC Full range 15 nA
VDD
=
5
V
,
VIC = 2.5 V, TLV246xI/Q/M Full range 60
IC
VO = 2.5 V, 25°C 1.3 14
IIB Input bias current RS = 50 ΩTLV246xC Full range 30 nA
TLV246xI/Q/M Full range 60
IOH =25mA
25°C 4.9
VOH
High level out
p
ut voltage
I
OH = –
2
.
5
mA
Full range 4.8
V
V
OH
High
-
level
output
voltage
IOH = 10 mA
25°C 4.8
V
I
OH = –
10
mA
Full range 4.7
VIC =25V
IOL =25mA
25°C 0.1
VOL
Low level out
p
ut voltage
V
IC =
2
.
5
V
,
I
OL =
2
.
5
mA
Full range 0.2
V
V
OL
Low
-
level
output
voltage
VIC =25V
IOL =10mA
25°C 0.2
V
V
IC =
2
.
5
V
,
I
OL =
10
mA
Full range 0.3
Sourcing
25°C 145
IOS
Short circuit out
p
ut current
Sourcing
Full range 60
mA
I
OS
Short
-
circuit
output
current
Sinking
25°C 100
mA
Sinking
Full range 60
IOOutput current Measured at 1 V from rail 25°C±80 mA
AVD
Lar
g
e-si
g
nal differential volta
g
e V
IC
= 2.5 V, R
L
= 10 kΩ,25°C 92 109
dB
A
VD
gg g
amplification
IC ,
VO = 1 V to 4 V
L,
Full range 90
dB
ri(d) Differential input resistance 25°C 109Ω
ci(c) Common-mode input capacitance f = 10 kHz 25°C 7 pF
zoClosed-loop output impedance f = 100 kHz, AV = 10 25°C 29 Ω
VICR
=–
0.2Vto
25°C 71 85
CMRR Common-mode rejection ratio
VICR
=
0
.
2
V
to
5.2 V, TLV246xC Full range 69 dB
RS = 50 ΩTLV246xI/Q/M Full range 60
VDD = 2.7 V to
6V
V
IC
= V
DD
/2, 25°C 80 85
dB
kSVR
Suppl
y
volta
g
e rejection ratio
6
V
,
No load
IC DD ,
Full range 75
dB
k
SVR
ygj
(∆VDD /∆VIO)VDD = 3 V to 5
V
V
IC
= V
DD
/2, 25°C 85 95
dB
V
,
No load
IC DD ,
Full range 80
dB
IDD
Su
pp
ly current (
p
er channel)
VO=25V
No load
25°C 0.55 0.65
mA
I
DD
Supply
current
(per
channel)
V
O =
2
.
5
V
,
No
load
,Full range 1
mA
IDD(SHDN)
Suppl
y
current in shutdown SHDN < 0.7 V, Per channels in 25°C 1
µA
I
DD(SHDN)
y
(TLV2460, TL V2463, TLV2465)
,
shutdown Full range 3µ
A
†Full range is 0°C to 70°C for the C suffix, –40°C to 125°C for the I and Q suffixes, and –55°C to 125°C for the M suffix.
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
10 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
operating characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted)
PARAMETER TEST CONDITIONS TA†MIN TYP MAX UNIT
VO(PP) =2V
CL= 160
p
F
25°C1 1.6
SR Slew rate at unity gain
V
O(PP) =
2
V
,
RL = 10 kΩ
C
L =
160
pF
,Full
range 0.8 V/µs
V
Equivalent in
p
ut noise voltage
f = 100 Hz 25°C 14
nV/√Hz
V
n
Equivalent
input
noise
voltage
f = 1 kHz 25°C11 n
V/√H
z
InEquivalent input noise current f = 100 Hz 25°C 0.13 pA/√Hz
VO(PP)
=
4V,
AV = 1 0.004%
THD + N Total harmonic distortion plus noise
VO(PP)
=
4
V
,
RL = 10 kΩ,AV = 10 25°C0.01%
f = 10 kHz AV = 100 0.04%
Both channels 7.6
t
(
on
)
Amplifier turnon time AV = 1, RL = 10 kΩChannel 1 only,
Channel 2 on 25°C7.65 µs
()
Channel 2 only,
Channel 1 on 7.25
Both channels 333
t
(
off
)
Amplifier turnoff time A V = 1, RL = 10 kΩChannel 1 only,
Channel 2 on 25°C328 ns
()
Channel 2 only,
Channel 1 on 329
Gain-bandwidth product f = 10 kHz,
CL = 160 pF RL = 10 kΩ,25°C 6.4 MHz
V(STEP)PP = 2 V,
A
V
= –1, 0.1% 1.53
t
Settling time
V,
CL = 10 pF,
RL = 10 kΩ0.01%
25
°
C
1.83
µs
t
s
Settling
time
V(STEP)PP = 2 V,
A
V
= –1, 0.1%
25°C
3.13 µ
s
V,
CL = 56 pF,
RL = 10 kΩ0.01% 3.33
φmPhase margin at unity gain
RL=10kΩ
CL= 160
p
F
25°C 45°
Gain margin
R
L =
10
kΩ
,
C
L =
160
pF
25°C 7 dB
†Full range is 0°C to 70°C for the C suffix, –40°C to 125°C for the I and Q suffixes, and –55°C to 125°C for the M suffix.
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
11
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Table of Graphs
FIGURE
VIO Input of fset voltage vs Common-mode input voltage 1, 2
IIB Input bias current vs Free-air temperature 3, 4
IIO Input offset current vs Free-air temperature 3, 4
VOH High-level output voltage vs High-level output current 5, 6
VOL Low-level output voltage vs Low-level output current 7, 8
VO(PP) Peak-to-peak output voltage vs Frequency 9, 10
Open-loop gain vs Frequency 11, 12
Phase vs Frequency 11, 12
AVD Differential voltage amplification vs Load resistance 13
Capacitive load vs Load resistance 14
ZoOutput impedance vs Frequency 15, 16
CMRR Common-mode rejection ratio vs Frequency 17
kSVR Supply-voltage rejection ratio vs Frequency 18, 19
IDD
Su
pp
ly current
vs Supply voltage 20
I
DD
Supply
current
vs Free-air temperature 21
Amplifier turnon characteristics 22
Amplifier turnoff characteristics 23
Supply current turnon 24
Supply current turnoff 25
Shutdown supply current vs Free-air temperature 26
SR Slew rate vs Supply voltage 27
V
Equivalent in
p
ut noise voltage
vs Frequency 28, 29
V
n
Equivalent
input
noise
voltage
vs Common-mode input voltage 30, 31
THD Total harmonic distortion vs Frequency 32, 33
THD+N Total harmonic distortion plus noise vs Peak-to-peak signal amplitude 34, 35
vs Frequency 11, 12
φmPhase margin vs Load capacitance 36
vs Free-air temperature 37
Gain bandwidth
p
roduct
vs Supply voltage 38
Gain
bandwidth
product
vs Free-air temperature 39
Large signal follower 40, 41
Small signal follower 42, 43
Inverting large signal 44, 45
Inverting small signal 46, 47
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
12 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Figure 1
–0.2
–0.6
–1
0
–0.4
–0.8
1
VICR – Common-Mode Input Voltage – V
INPUT OFFSET VOLTAGE
vs
COMMON-MODE INPUT VOLTAGE
10.5 1.5 30 2 2.5
VDD = 3 V
TA = 25°C
– Input Offset Voltage – mV
VIO
0.8
0.4
0.6
0.2
Figure 2
–0.2
–0.6
–1
0
–0.4
–0.8
1
VICR – Common-Mode Input Voltage – V
INPUT OFFSET VOLTAGE
vs
COMMON-MODE INPUT VOLTAGE
213504
VDD = 5 V
TA = 25°C
– Input Offset Voltage – mV
VIO
0.8
0.4
0.6
0.2
Figure 3
TA – Free-Air Temperature – °C
INPUT BIAS AND INPUT OFFSET CURRENT
vs
FREE-AIR TEMPERATURE
2.5
1.5
0.5
–0.5 –35 5
3
2
1
0
–15 25 125
4.5
–55 45 65
3.5
4
85 105
VDD = 3 V
VI = 1.5 V
IIB and I IO – Input Bias and Input Offset Current – nA
5
IIB
IIO
Figure 4
TA – Free-Air Temperature – °C
INPUT BIAS AND INPUT OFFSET CURRENT
vs
FREE-AIR TEMPERATURE
–1–35 5
3
2
1
0
–15 25 125–55 45 65
4
85 105
IIB and I IO – Input Bias and Input Offset Current – nA
5
IIB
IIO
VDD = 5 V
VI = 2.5 V
6
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
13
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Figure 5
TA = 125°C
TA = 85°C
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
0102030 60
IOH – High-Level Output Current – mA
5040 70 80
2.5
1
0
2
1.5
0.5
3
VOH – High-Level Output Voltage – V
VDD = 3 VDC
TA = –55°C
TA = 25°C
TA = –40°C
Figure 6
TA = 125°C
TA = 85°C
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
0 20 40 60 120
IOH – High-Level Output Current – mA
10080 140 200
2.5
1
0
2
1.5
0.5
3
VOH – High-Level Output Voltage – V
VDD = 5 VDC
TA = –55°C
4
5
4.5
3.5
160 180
TA = 25°C
TA = –40°C
Figure 7
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
0102030 60
IOL – Low-Level Output Current – mA
5040 70
2.5
1
0
2
1.5
0.5
3VDD = 3 VDC
TA = –55°C
OL
V– Low-Level Output Voltage – V
TA = 85°C
TA = 125°C
TA = 25°C
TA = –40°C
Figure 8
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
0 204060 120
IOL – Low-Level Output Current – mA
10080 140
2.5
1
0
2
1.5
0.5
3
VDD = 5 VDC
4.5
4
3.5
160
OL
V– Low-Level Output Voltage – V
TA = –55°C
TA = 85°C
TA = 125°C
TA = 25°C
TA = –40°C
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
14 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Figure 9
PEAK-TO-PEAK OUTPUT VOLTAGE
vs
FREQUENCY
10k 100k 10M
f – Frequency – Hz
1M
3
2
1
0
2.5
1.5
0.5
VO(PP) – Peak-to-Peak Output Voltage – V
VDD = 3 V
AV = –10
THD = 1%
RL = 10 kΩ
Figure 10
PEAK-TO-PEAK OUTPUT VOLTAGE
vs
FREQUENCY
10k 100k 10M
f – Frequency – Hz
1M
3
2
1
0
2.5
1.5
0.5
VO(PP) – Peak-to-Peak Output Voltage – V
VDD = 5 V
AV = –10
THD = 1%
RL = 10 kΩ
3.5
5
4
5.5
4.5
OPEN-LOOP GAIN AND PHASE
vs
FREQUENCY
40
20
0
–20 100 10k
f – Frequency – Hz
50
30
10
–10
1k 100k 1M
60
80
10
70
90
–140°
–200°
–120°
–100°
–80°
100
–60°
–40°
–20°
0°
20°
40°
–180°
–160°
Open-Loop Gain – dB
Phase
10M
AVD
Phase
VDD = ±1.5 V
RL = 10 kΩ
CL = 0
TA = 25°C
Figure 11
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
15
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
OPEN-LOOP GAIN AND PHASE
vs
FREQUENCY
40
20
0
–20 100 10k
f – Frequency – Hz
50
30
10
–10
1k 100k 1M
60
80
10
70
90
–140°
–200°
–120°
–100°
–80°
100
–60°
–40°
–20°
0°
20°
40°
–180°
–160°
Open-Loop Gain – dB
Phase
10M
AVD
Phase
VDD = ±2.5 V
RL = 10 kΩ
CL = 0
TA = 25°C
Figure 12
Figure 13
RL – Load Resistance – Ω
DIFFERENTIAL VOLTAGE AMPLIFICATION
vs
LOAD RESISTANCE
120
80
40
0
140
100
60
20
1k 10k 1M
180
100 100k
160 TA = 25°C
– Differential Voltage Amplification – V/mVAVD
VDD = ±2.5 V
VDD = ±1.5 V
Figure 14
CL– Capacitive Load – pF
CAPACITIVE LOAD
vs
LOAD RESISTANCE
10 100 10k
RL – Load Resistance – Ω
1k
10000
100
1000
Phase Margin > 30°
VDD = 5 V
Phase Margin = 30°
TA = 25°C
Phase Margin < 30°
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
16 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Figure 15
OUTPUT IMPEDANCE
vs
FREQUENCY
f – Frequency – Hz
1
0.1
0.01
10
1000
AV = 100
100 1k 10k 10M1M100k
– Output Impedance –ZoΩ
100
VDD = ±1.5 V
TA = 25°C
AV = 10
AV = 1
Figure 16
OUTPUT IMPEDANCE
vs
FREQUENCY
f – Frequency – Hz
1
0.1
0.01
10
1000
AV = 100
100 1k 10k 10M1M100k
– Output Impedance –ZoΩ
100
VDD = ±2.5 V
TA = 25°C
AV = 10
AV = 1
CMRR – Common-Mode Rejection Ratio – dB
COMMON-MODE REJECTION RATIO
vs
FREQUENCY
f – Frequency – Hz
10 1k 10k 10M1M100k
90
80
70
60
85
75
65
VDD = 5 V
VIC = 2.5 V
100
VDD = 3 V
VIC = 1.5 V
Figure 17
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
17
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Figure 18
SUPPLY-VOLTAGE REJECTION RATIO
vs
FREQUENCY
f – Frequency – Hz
10 1k 10k 10M1M100k
110
80
60
40
90
70
50
100
100 VDD = ±1.5 V
TA = 25°C
kSVR – Supply Voltage Rejection Ratio – dB
–kSVR
+kSVR
+kSVR
–kSVR
Figure 19
SUPPLY-VOLTAGE REJECTION RATIO
vs
FREQUENCY
f – Frequency – Hz
10 1k 10k 10M1M100k
80
60
40
90
70
50
100
VDD = ±2.5 V
TA = 25°C
kSVR – Supply Voltage Rejection Ratio – dB
–kSVR
+kSVR
+kSVR
–kSVR
Figure 20
VDD – Supply Voltage – V
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
0.7
0.5
0.30
0.10 34
0.8
0.6
0.40
0.20
3.5 4.5 62.5 5 5.5
IDD = 25°C
IDD – Supply Current – mA
IDD = 85°C
IDD = –55°C
IDD = 125°C
IDD = –40°C
Figure 21
TA – Free-Air Temperature – °C
SUPPLY CURRENT
vs
FREE-AIR TEMPERATURE
0.60
0.50
0.40
0.30 –35 5
0.65
0.55
0.45
0.35
–15 25 125
0.80
–55 45 65
0.70
0.75
VDD = 5 V
VI = 2.5 V
85 105
IDD – Supply Current – mA
VDD = 3 V
VI = 1.5 V
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
18 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Figure 22
t – Time – µs
AMPLIFIER WITH A SHUTDOWN PULSE
TURNON CHARACTERISTICS
2
0
2
0–31
1
3
1
–13 9
5
–5
V
57
SD – Shutdown Voltage – V
3
11
4
VDD = 5 V
RL = 10 kΩ
AV = 1
TA = 25°C
Shutdown Pin
Amplifier Output
Figure 23
t – Time – µs
AMPLIFIER WITH A SHUTDOWN PULSE
TURNOFF CHARACTERISTICS
2
0
2
0–31
1
3
1
–13
5
–5
V
57
SD – Shutdown Voltage – V
3
4VDD = 5 V
RL = 10 kΩ
AV = 1
TA = 25°C
Shutdown Pin
Amplifier Output
VDD = 5 V
VI = 2.5 V
AV = 1
TA = 25°C
0.4
–0.2
0.2
0
–0.4 –0.2 0 0.6
t – Time – µs0.40.2
SUPPLY CURRENT WITH A SHUTDOWN PULSE
TURNON CHARACTERISTICS
0.8
1
0.6
Supply Current
Shutdown Pin
IDD – Supply Current – mA
4.5
5.5
2.5
3.5
0.5
1.5
–0.5
VSD – Shutdown Voltage – V
Figure 24
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
19
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
VDD = 5 V
VI = 2.5 V
AV = 1
TA = 25°C
0.4
–0.2
0.2
0
–0.4 –0.2 0 0.6
t – Time – µs0.40.2
TURNOFF SUPPLY CURRENT
WITH A SHUTDOWN PULSE
0.8
1
0.6
Supply Current
Shutdown Pin
IDD – Supply Current – mA
4.5
5.5
2.5
3.5
0.5
1.5
–0.5
VSD – Shutdown Voltage – V
Figure 25
Figure 26
TA – Free-Air Temperature – °C
SHUTDOWN SUPPLY CURRENT
vs
FREE-AIR TEMPERATURE
2.5
1.5
0.5
–0.5
–35 5
3
2
1
0
–15 25 125–55 45 65 85 105
VDD = 5 V
VI = 2.5 V
–1
DD
I Shutdown Supply Current – –Aµ
VDD = 3 V
VI = 1.5 V
Figure 27
VDD – Supply Voltage – V
SLEW RATE
vs
SUPPLY VOLTAGE
2.5 3 3.5 4 5.5 654.5
1.6
1.5
1.4
1.3
1.55
1.45
1.35
1.8
1.7
1.75
1.65
SR – Slew Rate – V/µs
VO(PP) = 2 V
CL = 160 pF
AV = 1
RL = 10 kΩ
TA = 25°C
SR+
SR–
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
20 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Figure 28
EQUIVALENT INPUT NOISE VOLTAGE
vs
FREQUENCY
100 1k 100k
f – Frequency – Hz
10k
10
14
12
15
13
11
17
18
16
nV/ Hz– Equivalent Input Noise Voltage –Vn
VDD = 3 V
AV = 10
VI = 1.5 V
TA = 25°C
Figure 29
EQUIVALENT INPUT NOISE VOLTAGE
vs
FREQUENCY
100 1k 100k
f – Frequency – Hz
10k
10
14
12
15
13
11
17
18
16
nV/ Hz– Equivalent Input Noise Voltage –Vn
VDD = 5 V
AV = 10
VI = 2.5 V
TA = 25°C
Figure 30
VICR – Common-Mode Input Voltage – V
EQUIVALENT INPUT NOISE VOLTAGE
vs
COMMON-MODE INPUT VOLTAGE
12
10 1
14
13
11
0.5 1.5 3
20
02 2.5
15
VDD = 3 V
AV = 10
f = 1 kHz
TA = 25°C
nV/ Hz– Equivalent Input Noise Voltage –Vn
Figure 31
VICR – Common-Mode Input Voltage – V
EQUIVALENT INPUT NOISE VOLTAGE
vs
COMMON-MODE INPUT VOLTAGE
12
10 2
14
13
11
13
20
045
15
VDD = 5 V
AV = 10
f = 1 kHz
TA = 25°C
nV/ Hz– Equivalent Input Noise Voltage –Vn
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
21
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Figure 32
TOTAL HARMONIC DISTORTION
vs
FREQUENCY
0.010
0.001 100 10k
f – Frequency – Hz
1k 100k10
0.1
THD – Total Harmonic Distortion – %
VDD = ±1.5 V
VO(PP) = 2 V
RL = 10 kΩ
AV = 1
AV = 10
AV = 100
0.5
Figure 33
TOTAL HARMONIC DISTORTION
vs
FREQUENCY
0.010
0.001 100 10k
f – Frequency – Hz
1k 100k10
0.1
THD – Total Harmonic Distortion – %
VDD = ±2.5 V
VO(PP) = 4 V
RL = 10 kΩ
AV = 1
AV = 10
AV = 100
1
Figure 34
TOTAL HARMONIC DISTORTION PLUS NOISE
vs
PEAK-TO-PEAK SIGNAL AMPLITUDE
0.010
0.001
0.1
THD+N – Total Harmonic Distortion + Noise – %
VDD = 3 V
AV = 1
TA = 25°C
1
RL = 10 kΩ
RL = 2 kΩ
RL = 250 Ω
RL = 100 kΩ
Peak-to-Peak Signal Amplitude – V
1 1.2 1.4 1.6 2.2 2.421.8 2.6 2.8 3 3.2
Figure 35
TOTAL HARMONIC DISTORTION PLUS NOISE
vs
PEAK-TO-PEAK SIGNAL AMPLITUDE
0.010
0.001
0.1
THD+N – Total Harmonic Distortion + Noise – %
VDD = 5 V
AV = 1
TA = 25°C
1
RL = 10 kΩ
RL = 250 Ω
RL = 100 kΩ
Peak-to-Peak Signal Amplitude – V
4 4.1 4.2 4.3 4.6 4.74.54.4 4.8 4.9 5
RL = 2 kΩ
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
22 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Figure 36
CL – Load Capacitance – pF
PHASE MARGIN
vs
LOAD CAPACITANCE
60
40
20
0
70
50
30
10
100 1k 100k
90
10 10k
80
m
φ– Phase Margin – degrees
VDD = ±2.5 V
TA = 25°C
RL = 10 kΩ
Rnull = 50 Ω
Rnull = 20 Ω
Rnull = 0 Ω
Figure 37
TA – Free-Air Temperature – °C
PHASE MARGIN
vs
FREE-AIR TEMPERATURE
60
50
40
30 –35 5
55
45
35
–15 25 125–55 45 65
RL = 10 kΩ
CL = 160 pF
85 105
VDD = ±2.5 V
VDD = ±1.5 V
m
φ– Phase Margin – degrees
Figure 38
VDD – Supply Voltage – V
GAIN BANDWIDTH PRODUCT
vs
SUPPLY VOLTAGE
2.5 3 3.5 4 5.5 654.5
5
4.5
4
3.5
4.75
4.25
3.75
Gain Bandwidth Product – MHz
CL = 160 pF
RL = 10 kΩ
f = 10 kHz
TA = 25°C
Figure 39
TA – Free-Air Temperature – °C
GAIN BANDWIDTH PRODUCT
vs
FREE-AIR TEMPERATURE
4.5
4
3.5
3–35 5
4.25
3.75
3.25
–15 25 125–55 45 65
RL = 10 kΩ
CL = 160 pF
85 105
VDD = ±2.5 V
VDD = ±1.5 V
5
4.75
Gain Bandwidth Product – MHz
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
23
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Figure 40
VO– Voltage – V
1.4
0.8
1.2
1
–2024 10
t – Time – µs
861214
LARGE SIGNAL FOLLOWER
2.2
1.8
2
1.6
Input
Output
16 18
Output
Input
VDD = 3 V
VI(PP) = 1 V
VI = 1.5 V
RL = 10 kΩ
CL = 160 pF
AV = 1
TA = 25°C
Figure 41
VO– Voltage – V
2.1
1.7
1.3
–2024 10
t – Time – µs
861214
LARGE SIGNAL FOLLOWER
3.7
2.9
3.3
2.5
Input
Output
16 18
Output
Input
VDD = 5 V
VI(PP) = 2 V
VI = 2.5 V
RL = 10 kΩ
CL = 160 pF
AV = 1
TA = 25°C
Figure 42
VO– Voltage – V
1.5
1.4
1.45
–0.2 0 0.2 0.4 1
t – Time – µs
0.80.6 1.2 1.4
SMALL SIGNAL FOLLOWER
1.6
1.55
Input
Output
1.6 1.8
VDD = 3 V
VI(PP) = 100 mV
VI = 1.5 V
RL = 10 kΩ
CL = 160 pF
AV = 1
TA = 25°C
Figure 43
VO– Voltage – V
2.5
2.4
2.45
–0.2 0 0.2 0.4 1
t – Time – µs
0.80.6 1.2 1.4
SMALL SIGNAL FOLLOWER
2.6
2.55
Input
Output
1.6 1.8
VDD = 5 V
VI(PP) = 100 mV
VI = 2.5 V
RL = 10 kΩ
CL = 160 pF
AV = 1
TA = 25°C
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
24 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Figure 44
VO– Voltage – V
VDD = 3 V
VI(PP) = 1 V
VI = 1.5 V
RL = 10 kΩ
CL = 160 pF
AV = –1
TA = 25°C
1.1
0.5
0.9
0.7
–0.2 0 0.2 0.4 1
t – Time – µs
0.80.6 1.2 1.4
INVERTING LARGE SIGNAL
1.9
1.5
1.7
1.3
1.6 1.8
2.3
2.1 Input
Output
Figure 45
VDD = 5 V
VI(PP) = 2 V
VI = 2.5 V
RL = 10 kΩ
CL = 160 pF
AV = –1
TA = 25°C
2.5
1
2
1.5
–0.2 0 0.2 0.4 1
t – Time – µs
0.80.6 1.2 1.4
INVERTING LARGE SIGNAL
3.5
4
3
1.6 1.8
Input
Output
VO– Voltage – V
Figure 46
VO– Voltage – V
1.5
1.4
1.45
–0.2 0 0.2 0.4 1
t – Time – µs
0.80.6 1.2 1.4
INVERTING SMALL SIGNAL
1.6
1.55 Input
Output
1.6 1.8
VDD = 3 V
VI(PP) = 100 mV
VI = 1.5 V
RL = 10 kΩ
CL = 160 pF
AV = –1
TA = 25°C
Figure 47
VO– Voltage – V
2.5
2.4
2.45
–0.2 0 0.2 0.4 1
t – Time – µs
0.80.6 1.2 1.4
INVERTING SMALL SIGNAL
2.6
2.55 Input
Output
1.6 1.8
VDD = 5 V
VI(PP) = 100 mV
VI = 2.5 V
RL = 10 kΩ
CL = 160 pF
AV = –1
TA = 25°C
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
25
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PARAMETER MEASUREMENT INFORMATION
_
+
Rnull
RLCL
Figure 48
APPLICATION INFORMATION
driving a capacitive load
When the amplifier is configured in this manner, capacitive loading directly on the output will decrease the
device’s phase margin leading to high frequency ringing or oscillations. Therefore, for capacitive loads of greater
than 10 pF, it is recommended that a resistor be placed in series (RNULL) with the output of the amplifier, as
shown in Figure 49. A minimum value of 20 Ω should work well for most applications.
CLOAD
RF
Input Output
RGRNULL
_
+
Figure 49. Driving a Capacitive Load
offset voltage
The output offset voltage, (VOO) is the sum of the input offset voltage (VIO) and both input bias currents (IIB) times
the corresponding gains. The following schematic and formula can be used to calculate the output offset
voltage:
VOO
+
VIO
ǒ
1
)ǒ
RF
RG
ǓǓ"
IIB
)
RS
ǒ
1
)ǒ
RF
RG
ǓǓ"
IIB–RF
+
–
VI+
RG
RS
RF
IIB–
VO
IIB+
Figure 50. Output Offset Voltage Model
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
26 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
APPLICATION INFORMATION
general configurations
When receiving low-level signals, limiting the bandwidth of the incoming signals into the system is often
required. The simplest way to accomplish this is to place an RC filter at the noninverting terminal of the amplifier
(see Figure 51).
VIVO
C1
+
–
RGRF
R1
f–3dB
+
1
2
p
R1C1
VO
VI
+ǒ
1
)
RF
RG
Ǔǒ
1
1
)
sR1C1
Ǔ
Figure 51. Single-Pole Low-Pass Filter
If even more attenuation is needed, a multiple pole filter is required. The Sallen-Key filter can be used for this
task. For best results, the amplifier should have a bandwidth that is 8 to 10 times the filter frequency bandwidth.
Failure to do this can result in phase shift of the amplifier.
VI
C2
R2R1
C1
RF
RG
R1 = R2 = R
C1 = C2 = C
Q = Peaking Factor
(Butterworth Q = 0.707)
(
=1
Q
2 –)
RGRF
_
+f–3dB
+
1
2
p
RC
Figure 52. 2-Pole Low-Pass Sallen-Key Filter
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
27
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
APPLICATION INFORMATION
shutdown function
Three members of the TLV246x family (TLV2460/3/5) have a shutdown terminal for conserving battery life in
portable applications. When the shutdown terminal is tied low , the supply current is reduced to 0.3 µA/channel,
the amplifier is disabled, and the outputs are placed in a high impedance mode. To enable the amplifier, the
shutdown terminal can either be left floating or pulled high. When the shutdown terminal is left floating, care
should be taken to ensure that parasitic leakage current at the shutdown terminal does not inadvertently place
the operational amplifier into shutdown. The shutdown terminal threshold is always referenced to VDD/2.
Therefore, when operating the device with split supply voltages (e.g. ±2.5 V), the shutdown terminal needs to
be pulled to VDD– (not GND) to disable the operational amplifier.
The amplifier’s output with a shutdown pulse is shown in Figures 22, 23, 24, and 25. The amplifier is powered
with a single 5-V supply and configured as a noninverting configuration with a gain of 5. The amplifier turnon
and turnoff times are measured from the 50% point of the shutdown pulse to the 50% point of the output
waveform. The times for the single, dual, and quad are listed in the data tables.
circuit layout considerations
T o achieve the levels of high performance of the TLV246x, follow proper printed-circuit board design techniques.
A general set of guidelines is given in the following.
D
Ground planes – It is highly recommended that a ground plane be used on the board to provide all
components with a low inductive ground connection. However, in the areas of the amplifier inputs and
output, the ground plane can be removed to minimize the stray capacitance.
D
Proper power supply decoupling – Use a 6.8-µF tantalum capacitor in parallel with a 0.1-µF ceramic
capacitor on each supply terminal. It may be possible to share the tantalum among several amplifiers
depending on the application, but a 0.1-µF ceramic capacitor should always be used on the supply terminal
of every amplifier. In addition, the 0.1-µF capacitor should be placed as close as possible to the supply
terminal. As this distance increases, the inductance in the connecting trace makes the capacitor less
effective. The designer should strive for distances of less than 0.1 inches between the device power
terminals and the ceramic capacitors.
D
Sockets – Sockets can be used but are not recommended. The additional lead inductance in the socket pins
will often lead to stability problems. Surface-mount packages soldered directly to the printed-circuit board
is the best implementation.
D
Short trace runs/compact part placements – Optimum high performance is achieved when stray series
inductance has been minimized. To realize this, the circuit layout should be made as compact as possible,
thereby minimizing the length of all trace runs. Particular attention should be paid to the inverting input of
the amplifier . Its length should be kept as short as possible. This will help to minimize stray capacitance at
the input of the amplifier.
D
Surface-mount passive components – Using surface-mount passive components is recommended for high
performance amplifier circuits for several reasons. First, because of the extremely low lead inductance of
surface-mount components, the problem with stray series inductance is greatly reduced. Second, the small
size of surface-mount components naturally leads to a more compact layout thereby minimizing both stray
inductance and capacitance. If leaded components are used, it is recommended that the lead lengths be
kept as short as possible.
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
28 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
APPLICATION INFORMATION
general power dissipation considerations
For a given θJA, the maximum power dissipation is shown in Figure 53 and is calculated by the following formula:
PD
+ǒ
TMAX–TA
q
JA
Ǔ
Where: PD= Maximum power dissipation of THS246x IC (watts)
TMAX= Absolute maximum junction temperature (150°C)
TA= Free-ambient air temperature (°C)
θJA = θJC + θCA
θJC = Thermal coefficient from junction to case
θCA = Thermal coefficient from case to ambient air (°C/W)
1
0.75
0.5
0
–55–40 –25 –10 5
Maximum Power Dissipation – W
1.25
1.5
MAXIMUM POWER DISSIPATION
vs
FREE-AIR TEMPERATURE
1.75
20 35 50
0.25
TA – Free-Air Temperature – °C
2
65 80 95 110 125
MSOP Package
Low-K Test PCB
θJA = 260°C/W
TJ = 150°C
PDIP Package
Low-K Test PCB
θJA = 104°C/W
SOIC Package
Low-K Test PCB
θJA = 176°C/W
SOT -23 Package
Low-K Test PCB
θJA = 324°C/W
NOTE A: Results are with no air flow and using JEDEC Standard Low-K test PCB.
Figure 53. Maximum Power Dissipation vs Free-Air Temperature
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
29
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
APPLICATION INFORMATION
macromodel information
Macromodel information provided was derived using Microsim Parts Release 8, the model generation
software used with Microsim PSpice. The Boyle macromodel (see Note 2) and subcircuit in Figure 54 are
generated using the TLV246x typical electrical and operating characteristics at TA = 25°C. Using this
information, output simulations of the following key parameters can be generated to a tolerance of 20% (in most
cases):
D
Maximum positive output voltage swing
D
Maximum negative output voltage swing
D
Slew rate
D
Quiescent power dissipation
D
Input bias current
D
Open-loop voltage amplification
D
Unity-gain frequency
D
Common-mode rejection ratio
D
Phase margin
D
DC output resistance
D
AC output resistance
D
Short-circuit output current limit
NOTE 2: G. R. Boyle, B. M. Cohn, D. O. Pederson, and J. E. Solomon, “Macromodeling of Intergrated Circuit Operational Amplifiers”, IEEE
Journal of Solid-State Circuits, SC-9, 353 (1974).
+
–
+
–
+
–
+
–+
–
.SUBCKT TLV246X 1 2 3 4 5
C1 11 12 2.46034E–12
C2 6 7 10.0000E–12
CSS 10 99 443.21E–15
DC 5 53 DY
DE 54 5 DY
DLP 90 91 DX
DLN 92 90 DX
DP 43DX
EGND 99 0 POLY (2) (3,0) (4,0) 0 .5 .5
FB 7 99 POLY (5) VB VC VE VLP
+ VLN 0 21.600E6 –1E3 1E3 22E6 –22E6
GA 6 0 11 12 345.26E–6
GCM 0 6 10 99 15.4226E–9
ISS 10 4 DC 18.850E–6
HLIM 90 0 VLIM 1K
J1 11 2 10 JX1
J2 12 1 10 JX2
R2 6 9 100.00E3
RD1 3 11 2.8964E3
RD2 3 12 2.8964E3
R01 8 5 5.6000
R02 7 99 6.2000
RP 3 4 8.9127
RSS 10 99 10.610E6
VB 9 0 DC 0
VC 3 53 DC .7836
VE 54 4 DC .7436
VLIM 7 8 DC 0
VLP 91 0 DC 117
VLN 0 92 DC 117
.MODEL DX D (IS=800.00E–18)
.MODEL DY D (IS=800.00E–18 Rs = 1m Cjo=10p)
.MODEL JX1 NJF (IS=1.0000E–12 BETA=6.3239E–3
+ VTO=–1)
.MODEL JX2 NJF (IS=1.0000E–12 BETA=6.3239E–3
+ VTO=–1)
.ENDS
VDD+
RP
IN –2
IN+ 1
GND
RD1
11
J1 J2
10
RSS
ISS
3
12
RD2
DP
VD
DC
4
C1
53
EGND FB
HLIM
90 DLP
91
DLN 92
VLNVLP
99
CSS
+
–
VE
DE
54
OUT
+
–
+
–
R2 6
9
VB
C2
GA
VLIM
8
5
RO1
RO2
7
GCM
Figure 54. Boyle Macromodels and Subcircuit
PSpice and Parts are trademarks of MicroSim Corporation.
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
30 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
macromodel information (continued)
.subckt TLV_246Y 1 2 3 4 5 6
c1 11 12 2.4603E–12
c2 72 7 10.000E–12
css 10 99 443.21E–15
dc 70 53 dy
de 54 70 dy
dlp 90 91 dx
dln 92 90 dx
dp 4 3 dx
egnd 99 0 poly(2) (3,0) (4,0) 0 .5 .5
fb 7 99 poly(5) vb vc ve vlp vln 0
21.600E6 –1E3 1E3 22E6 –22E6
ga 72 0 11 12 345.26E–6
gcm 0 72 10 99 15.422E–9
iss 74 4 dc 18.850E–6
hlim 90 0 vlim 1K
j1 11 2 10 jx1
j2 12 1 10 jx2
r2 72 9 100.00E3
rd1 3 11 2.8964E3
rd2 3 12 2.8964E3
ro1 8 70 5.6000
ro2 7 99 6.2000
rp 3 71 8.9127
rss 10 99 10.610E6
rs1 6 4 1G
rs2 6 4 1G
rs3 6 4 1G
rs4 6 4 1G
s1 71 4 6 4 s1x
s2 70 5 6 4 s1x
s3 10 74 6 4 s1x
s4 74 4 6 4 s2x
vb 9 0 dc 0
vc 3 53 dc .7836
ve 54 4 dc .7436
vlim 7 8 dc 0
vlp 91 0 dc 117
vln 0 92 dc 117
.model dx D(Is=800.00E–18)
.model dy D(Is=800.00E–18 Rs=1m Cjo=10p)
.model jx1 NJF(Is=1.0000E–12 Beta=6.3239E–3 Vto=–1)
.model jx2 NJF(Is=1.0000E–12 Beta=6.3239E–3 Vto=–1)
.model s1x VSWITCH(Roff=1E8 Ron=1.0 Voff=2.5 Von=0.0)
.model s2x VSWITCH(Roff=1E8 Ron=1.0 Voff=0 Von=2.5)
.ends
Figure 54. Boyle Macromodels and Subcircuit (Continued)
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
31
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
D (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE
14 PIN SHOWN
4040047/D 10/96
0.228 (5,80)
0.244 (6,20)
0.069 (1,75) MAX 0.010 (0,25)
0.004 (0,10)
1
14
0.014 (0,35)
0.020 (0,51)
A
0.157 (4,00)
0.150 (3,81)
7
8
0.044 (1,12)
0.016 (0,40)
Seating Plane
0.010 (0,25)
PINS **
0.008 (0,20) NOM
A MIN
A MAX
DIM
Gage Plane
0.189
(4,80)
(5,00)
0.197
8
(8,55)
(8,75)
0.337
14
0.344
(9,80)
16
0.394
(10,00)
0.386
0.004 (0,10)
M
0.010 (0,25)
0.050 (1,27)
0°–8°
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion, not to exceed 0.006 (0,15).
D. Falls within JEDEC MS-012
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
32 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
DBV (R-PDSO-G5) PLASTIC SMALL-OUTLINE PACKAGE
0,25
0,35
0,55
Gage Plane
0,15 NOM
4073253-4/B 10/97
2,50
3,00
0,40
0,20
1,50
1,80
45
3
3,10
1
2,70
1,00
1,30 0,05 MIN
Seating Plane
0,10
0,95 M
0,25
0°–8°
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions include mold flash or protrusion.
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
33
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
DBV (R-PDSO-G6) PLASTIC SMALL-OUTLINE PACKAGE
0,25
Gage Plane
0,15 NOM
4073253-5/B 10/97
2,50
3,00
0,40
0,20
1,50
1,80
46
3
3,10
1
2,70
1,30
1,00 0,05 MIN
Seating Plane
0,95 M
0,25
0°–8°
0,10
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions include mold flash or protrusion.
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
34 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
DGK (R-PDSO-G8) PLASTIC SMALL-OUTLINE PACKAGE
0,69
0,41
0,25
0,15 NOM
Gage Plane
4073329/A 02/97
4,98
0,25
5
3,05 4,78
2,95
8
4
3,05
2,95
1
0,38
1,07 MAX 0,15 MIN
Seating Plane
0,65 M
0,25
0°–6°
0,10
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion.
D. Falls within JEDEC MO-187
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
35
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
DGS (S-PDSO-G10) PLASTIC SMALL-OUTLINE PACKAGE
0,69
0,41
0,25
0,15 NOM
Gage Plane
4073272/A 12/97
4,98
0,17
6
3,05 4,78
2,95
10
5
3,05
2,95
1
0,27
0,15
0,05
1,07 MAX
Seating Plane
0,10
0,50 M
0,25
0°–6°
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion.
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
36 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
FK (S-CQCC-N**) LEADLESS CERAMIC CHIP CARRIER
4040140/D 10/96
28 TERMINAL SHOWN
B
0.358
(9,09)
MAX
(11,63)
0.560
(14,22)
0.560
0.458
0.858
(21,8)
1.063
(27,0)
(14,22)
A
NO. OF
MINMAX
0.358
0.660
0.761
0.458
0.342
(8,69)
MIN
(11,23)
(16,26)
0.640
0.739
0.442
(9,09)
(11,63)
(16,76)
0.962
1.165
(23,83)
0.938
(28,99)
1.141
(24,43)
(29,59)
(19,32)(18,78)
**
20
28
52
44
68
84
0.020 (0,51)
TERMINALS
0.080 (2,03)
0.064 (1,63)
(7,80)
0.307
(10,31)
0.406
(12,58)
0.495
(12,58)
0.495
(21,6)
0.850
(26,6)
1.047
0.045 (1,14)
0.045 (1,14)
0.035 (0,89)
0.035 (0,89)
0.010 (0,25)
121314151618 17
11
10
8
9
7
5
432
0.020 (0,51)
0.010 (0,25)
6
12826 27
19
21
B SQ
A SQ 22
23
24
25
20
0.055 (1,40)
0.045 (1,14)
0.028 (0,71)
0.022 (0,54)
0.050 (1,27)
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a metal lid.
D. The terminals are gold plated.
E. Falls within JEDEC MS-004
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
37
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
N (R-PDIP-T**) PLASTIC DUAL-IN-LINE PACKAGE
20
0.975
(24,77)
0.940
(23,88)
18
0.920
0.850
14
0.775
0.745
(19,69)
(18,92)
16
0.775
(19,69)
(18,92)
0.745
A MIN
DIM
A MAX
PINS **
0.310 (7,87)
0.290 (7,37)
(23.37)
(21.59)
Seating Plane
0.010 (0,25) NOM
14/18 PIN ONLY
4040049/C 08/95
9
8
0.070 (1,78) MAX
A
0.035 (0,89) MAX 0.020 (0,51) MIN
16
1
0.015 (0,38)
0.021 (0,53)
0.200 (5,08) MAX
0.125 (3,18) MIN
0.240 (6,10)
0.260 (6,60)
M
0.010 (0,25)
0.100 (2,54) 0°–15°
16 PIN SHOWN
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-001 (20 pin package is shorter then MS-001.)
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
38 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
JG (R-GDIP-T8) CERAMIC DUAL-IN-LINE PACKAGE
0.310 (7,87)
0.290 (7,37)
0.014 (0,36)
0.008 (0,20)
Seating Plane
4040107/C 08/96
5
4
0.065 (1,65)
0.045 (1,14)
8
1
0.020 (0,51) MIN
0.400 (10,20)
0.355 (9,00)
0.015 (0,38)
0.023 (0,58)
0.063 (1,60)
0.015 (0,38)
0.200 (5,08) MAX
0.130 (3,30) MIN
0.245 (6,22)
0.280 (7,11)
0.100 (2,54)
0°–15°
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a ceramic lid using glass frit.
D. Index point is provided on cap for terminal identification only on press ceramic glass frit seal only.
E. Falls within MIL-STD-1835 GDIP1-T8
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
39
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
J (R-GDIP-T**) CERAMIC DUAL-IN-LINE PACKAGE
1
20
0.290
(7,87)
0.310
0.975
(24,77)
(23,62)
0.930
(7,37)
0.245
(6,22)
(7,62)
0.300
181614
PINS **
0.290
(7,87)
0.310
0.785
(19,94)
(19,18)
0.755
(7,37)
0.310
(7,87)
(7,37)
0.290
0.755
(19,18)
(19,94)
0.785
0.245
(6,22)
(7,62)
0.300
A
0.300
(7,62)
(6,22)
0.245
A MIN
A MAX
B MAX
B MIN
C MIN
C MAX
DIM
0.310
(7,87)
(7,37)
0.290
(23,10)
0.910
0.300
(7,62)
(6,22)
0.245
0°–15°
Seating Plane
0.014 (0,36)
0.008 (0,20)
4040083/D 08/98
C
8
7
0.020 (0,51) MIN
B
0.070 (1,78)
0.100 (2,54)
0.065 (1,65)
0.045 (1,14)
14 PIN SHOWN
14
0.015 (0,38)
0.023 (0,58)
0.100 (2,54)
0.200 (5,08) MAX
0.130 (3,30) MIN
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a ceramic lid using glass frit.
D. Index point is provided on cap for terminal identification only on press ceramic glass frit seal only.
E. Falls within MIL STD 1835 GDIP1-T14, GDIP1-T16, GDIP1-T18, GDIP1-T20, and GDIP1-T22.
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
40 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
P (R-PDIP-T8) PLASTIC DUAL-IN-LINE PACKAGE
4040082/B 03/95
0.310 (7,87)
0.290 (7,37)
0.010 (0,25) NOM
0.400 (10,60)
0.355 (9,02)
58
41
0.020 (0,51) MIN
0.070 (1,78) MAX
0.240 (6,10)
0.260 (6,60)
0.200 (5,08) MAX
0.125 (3,18) MIN
0.015 (0,38)
0.021 (0,53)
Seating Plane
M
0.010 (0,25)
0.100 (2,54) 0°–15°
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-001
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
41
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE
4040064/E 08/96
14 PIN SHOWN
Seating Plane
1,20 MAX
1
A
7
14
0,19
4,50
4,30
8
6,20
6,60
0,30
0,75
0,50
0,25
Gage Plane
0,15 NOM
0,65 M
0,10
0°–8°
0,10
PINS **
A MIN
A MAX
DIM
2,90
3,10
8
4,90
5,10
14
6,60
6,404,90
5,10
16
7,70
20
7,90
24
9,60
9,80
28
0,15
0,05
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-153
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
42 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
U (S-GDFP-F10) CERAMIC DUAL FLATPACK
4040179/B 03/95
1.000 (25,40)
0.080 (2,03)
0.250 (6,35)
0.250 (6,35)
0.019 (0,48)
0.025 (0,64)
0.300 (7,62)
0.045 (1,14)
0.006 (0,15)
0.050 (1,27)
0.015 (0,38)
0.005 (0,13)
0.026 (0,66)
0.004 (0,10)
0.246 (6,10)
0.750 (19,05)
110
56
0.250 (6,35)
0.350 (8,89)0.350 (8,89)
0.250 (6,35)
0.050 (1,27)
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a ceramic lid using glass frit.
D. Index point is provided on cap for terminal identification only.
E. Falls within MIL STD 1835 GDFP1-F10 and JEDEC MO-092AA
TLV2460, TLV2461, TLV2462, TLV2463, TLV2464, TLV2465, TLV246xA
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS220I – JULY 1998 – REVISED MARCH 2001
43
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL INFORMATION
W (R-GDFP-F14) CERAMIC DUAL FLATPACK
0.360 (9,14)
0.240 (6,10)
87
141
0.735 (18,67)
0.235 (5,97)
0.004 (0,10)
0.026 (0,66)
0.015 (0,38)
0.015 (0,38)
0.045 (1,14)
0.335 (8,51)
0.007 (0,18)
0.045 (1,14)
Base and Seating Plane
0.025 (0,64)
0.019 (0,48)
0.390 (9,91)
0.260 (6,60)
0.080 (2,03)
1.000 (25,40)
4040180-2/B 03/95
0.360 (9,14)
0.240 (6,10)
0.280 (7,11)
0.255 (6,48)
0.050 (1,27)
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a ceramic lid using glass frit.
D. Index point is provided on cap for terminal identification only.
E. Falls within MIL STD 1835 GDFP1-F14 and JEDEC MO-092AB
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its products to the specifications applicable at the time of sale in accordance with
TI’s standard warranty . T esting and other quality control techniques are utilized to the extent TI deems necessary
to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except
those mandated by government requirements.
Customers are responsible for their applications using TI components.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
products or services might be or are used. TI’s publication of information regarding any third party’s products
or services does not constitute TI’s approval, license, warranty or endorsement thereof.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations and notices. Representation
or reproduction of this information with alteration voids all warranties provided for an associated TI product or
service, is an unfair and deceptive business practice, and TI is not responsible nor liable for any such use.
Resale of TI’s products or services with
statements different from or beyond the parameters
stated by TI for
that product or service voids all express and any implied warranties for the associated TI product or service,
is an unfair and deceptive business practice, and TI is not responsible nor liable for any such use.
Also see: Standard Terms and Conditions of Sale for Semiconductor Products. www .ti.com/sc/docs/stdterms.htm
Mailing Address:
Texas Instruments
Post Office Box 655303
Dallas, Texas 75265
Copyright 2001, Texas Instruments Incorporated