HMC426MS8 / 426MS8E v00.0903 Features Prescaler for DC to 4.0 GHz PLL Applications: Ultra Low SSB Phase Noise: -146 dBc/Hz * DBS/CATV Tuners Wide Input Power Range: -15 to +10 dBm * 802.11x & HiperLAN WLAN Output Power: +3.5 dBm * Fixed Wireless & WLL Single DC Supply: +3V @ 13 mA * Microwave & VSAT Radios MS8 SMT Package TE Typical Applications * Cellular & 3G General Description LE Functional Diagram B SO The HMC426MS8 & HMC426MS8E are low noise Divide-by-4 Static Dividers utilizing SiGe technology in 8 lead surface mount plastic packages. This device operates from DC (with a square wave input) to 4.0 GHz input frequency while operating from a single +3V supply at only 13 mA. The low additive SSB phase noise of -146 dBc/Hz at 100 kHz offset helps the user maintain excellent system noise performance. Electrical Specifi cations, TA = +25 C, 50 Ohm System, Vcc= 3V O FREQUENCY DIVIDERS & DETECTORS - SMT 6 SMT SiGe MMIC DIVIDE-BY-4, DC - 4 GHz Parameter Conditions Min. Typ. 4.0 4.5 0.2 0.5 GHz Fin = 0.5 to 2 GHz -15 -20 +5 dBm Fin = 2 to 4 GHz -15 -20 +10 dBm Fin = 1 GHz +0.5 +3.5 dBm Fin = 4 GHz -3 0 dBm Maximum Input Frequency Minimum Input Frequency Sine Wave Input. [1] Input Power Range Output Power Reverse Leakage SSB Phase Noise (100 kHz offset) Output Transition Time Max. Units GHz 25 dB Pin = 0 dBm, Fin = 3 GHz -146 dBc/Hz Pin = 0 dBm, Fout = 500 MHz 400 ps 13 mA Supply Current (Icc) 1. Divider will operate down to DC for square-wave input signal. 6 - 60 For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC426MS8 / 426MS8E v00.0903 SMT SiGe MMIC DIVIDE-BY-4, DC - 4 GHz 10 10 Recommended Operating Window -20 -10 -20 -30 -30 0 1 2 3 4 0 1 2 3 4 INPUT FREQUENCY (GHz) LE INPUT FREQUENCY (GHz) SSB Phase Noise Performance @ Fin= 3 GHz Pin= 0 dBm, T= 25 C Output Power vs. Temperature 10 0 8 -20 6 4 2 0 -2 -4 B SO OUTPUT POWER (dBm) Min Pin +25C Max Pin +25C Min Pin +85C Max Pin +85C Min Pin -40C Max Pin -40C TE -10 0 +25C +85C -40C -6 -8 -10 0 1 2 3 -40 -60 -80 -100 -120 -140 -160 2 10 4 3 4 10 INPUT FREQUENCY (GHz) Output Harmonic Content, Pin= 0 dBm, T= 25 C 5 10 6 10 10 7 10 OFFSET FREQUENCY (Hz) O Reverse Leakage, Pin= 0 dBm, T= 25 C 0 FREQUENCY DIVIDERS & DETECTORS - SMT 20 INPUT POWER (dBm) 20 0 6 Input Sensitivity Window vs. Temperature SSB PHASE NOISE (dBc/Hz) INPUT POWER (dBm) Input Sensitivity Window, T= 25 C 0 -10 OUTPUT LEVEL (dBm) OUTPUT LEVEL (dBm) -10 -20 -30 -40 Pfeedthru 2nd Harmonic 3rd Harmonic -20 -30 -40 -50 -60 -70 -50 -80 0 1 2 3 4 INPUT FREQUENCY (GHz) 0 1 2 3 4 INPUT FREQUENCY (GHz) For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 6 - 61 HMC426MS8 / 426MS8E v00.0903 6 SMT SiGe MMIC DIVIDE-BY-4, DC - 4 GHz Output Voltage Waveform, Pin= 0 dBm, Fout= 500 MHz, T= 25 C Input Return Loss 0 400 -5 200 100 0 -100 -200 -300 -15 -20 -25 -30 -400 -500 24.6 -10 TE RETURN LOSS (dB) 300 AMPLITUDE (mV) -35 25.2 25.7 26.3 26.9 27.4 28 TIME (nS) 0 1 2 3 4 B SO LE INPUT FREQUENCY (GHz) O FREQUENCY DIVIDERS & DETECTORS - SMT 500 6 - 62 For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC426MS8 / 426MS8E v00.0903 SMT SiGe MMIC DIVIDE-BY-4, DC - 4 GHz Typical Supply Current vs. Vcc RF Input (Vcc = +3V) +13 dBm Vcc (V) Icc (mA) Vcc +3.5V 2.7 10 Channel Temperature 150 C 3.0 13 3.3 16 Continuous Pdiss (T = 85 C) (derate 7 mW/ C above 85 C) 460 mW Thermal Resistance (RTH)(junction to lead) 142 C/W Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C Note: Divider will operate over full voltage range shown above TE ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS B SO LE Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY O 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 6 FREQUENCY DIVIDERS & DETECTORS - SMT Absolute Maximum Ratings 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC426MS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC426MS8E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H426 XXXX [2] H426 XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 6 - 63 HMC426MS8 / 426MS8E v00.0903 Pin Description Function Description Interface Schematic 1 VCC Supply voltage 3V 0.3V. 2 IN RF Input must be DC blocked. 3 IN RF Input 180 out of phase with pin 2 for differential operation. AC ground for single ended operation. 4, 5 GND 6, 8 N/C LE TE Pin Number RF/DC Ground B SO No connection. 7 OUT Divided output. Application Circuit O FREQUENCY DIVIDERS & DETECTORS - SMT 6 SMT SiGe MMIC DIVIDE-BY-4, DC - 4 GHz 6 - 64 For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC426MS8 / 426MS8E v00.0903 SMT SiGe MMIC DIVIDE-BY-4, DC - 4 GHz TE LE B SO O List of Materials for Evaluation PCB 107622 [1] Item Description J1 - J2 PCB Mount SMA RF Connector J3 - J4 DC Pin C1 1000 pF Capacitor, 0603 Pkg. C2 4.7 uF Tantalum Capacitor C3 - C4 100 pF Capacitor, 0402 Pkg. C5 1000 pF Capacitor, 0402 Pkg. U1 HMC426MS8 / HMC426MS8E Divide-by-4 PCB [2] 107620 Eval Board [1] Reference this number when ordering complete evaluation PCB FREQUENCY DIVIDERS & DETECTORS - SMT 6 Evaluation PCB The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. This evaluation board is designed for single ended input and output testing. [2] Circuit Board Material: Rogers 4350 For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 6 - 65