LM2682 www.ti.com SNVS044B - NOVEMBER 1999 - REVISED MAY 2013 LM2682 Switched Capacitor Voltage Doubling Inverter Check for Samples: LM2682 FEATURES DESCRIPTION * * * * The LM2682 is a CMOS charge-pump voltage inverter capable of converting positive voltage in the range of +2.0V to +5.5V to the corresponding doubled negative voltage of -4.0V to -11.0V respectively. The LM2682 uses three low cost capacitors to provide 10 mA of output current without the cost, size, and EMI related to inductor based circuits. With an operating current of only 150 A and an operating efficiency greater than 90% with most loads, the LM2682 provides ideal performance for battery powered systems. The LM2682 offers a switching frequency of 6 kHz. 1 2 Inverts Then Doubles Input Supply Voltage Small VSSOP Package and SOIC Package 90 Typical Output Impedance 94% Typical Power Efficiency at 10 mA APPLICATIONS * * * * * LCD Contrast Biasing GaAs Power Amplifier Biasing Interface Power Supplies Handheld Instrumentation Laptop Computers and PDAs Typical Operating Circuit and Pin Configuration 8-Pin VSSOP or 8-Pin SOIC These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 1999-2013, Texas Instruments Incorporated LM2682 SNVS044B - NOVEMBER 1999 - REVISED MAY 2013 www.ti.com Absolute Maximum Ratings (1) Input Voltage (VIN) +5.8V VIN dV/dT 1V/sec -11.6V VOUT VOUT Short-Circuit Duration Continuous -65C to +150C Storage Temperature Lead Temperature Soldering Power Dissipation (2) +300C VSSOP 300 mW SOIC 470 mW TJMAX (1) +150C Absolute Maximum Ratings are those values beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but do not ensure specific performance limits. For ensured specifications and test conditions, see the Electrical Characteristics. The maximum power dissipation must be de-rated at elevated temperatures (only needed for TA>85C) and is limited by TJMAX (maximum junction temperature), J-A (junction to ambient thermal resistance) and TA (ambient temperature). J-A is 140C/W for the SOIC-8 package and 220C/W for the VSSOP-8 package. The maximum power dissipation at any temperature is:PDissMAX = (TJMAX - TA)/J-A up to the value listed in the Absolute Maximum Ratings. (2) Operating Ratings Human Body Model ESD Susceptibility (1) 2 kV Machine Model 200V Ambient Temp. Range -40C to +85C Junction Temp. Range -40C to +125C (1) The human body model is a 100 pF capacitor discharged through a 1.5 k resistor into each pin. The machine model is a 200pF capacitor discharged directly into each pin. LM2682 Electrical Characteristics VIN = 5V and C1 = C2 = C3 = 3.3F unless otherwise specified. Limits with bold typeface apply over the full operating ambient temperature range, -40C to +85C, limits with standard typeface apply for TA = 25C. Symbol Parameter Conditions Typical (1) Max Units 5.5 V 150 300 400 A IL = 10 mA 90 150 IL=5 mA, VIN=2 V 110 250 12 30 kHz 6 15 kHz VIN Supply Voltage Range RL = 2 k IIN Supply Current Open Circuit, No Load ROUT VOUT Source Resistance Min 2.0 200 fOSC Oscillator Frequency See (2) fSW Switching Frequency See (2) POWER Power Efficiency RL = 2k (3) VOLTAGE Voltage Conversion Efficiency (1) (2) (3) 2 90 93 % 99.9 % Typical numbers are at 25C and represent the most likely norm. The output switches operate at one half of the oscillator frequency, fOSC = 2fSW. The minimum specification is specified by design and is not tested. Submit Documentation Feedback Copyright (c) 1999-2013, Texas Instruments Incorporated Product Folder Links: LM2682 LM2682 www.ti.com SNVS044B - NOVEMBER 1999 - REVISED MAY 2013 Table 1. PIN DESCRIPTIONS Pin Number Symbol 1 C1- Capacitor C1 negative terminal Description 2 C2+ Capacitor C2 positive terminal 3 C2- Capacitor C2 negative terminal 4 VOUT Negative output voltage (-2VIN) 5 GND Device ground 6 VIN Power supply voltage 7 C1+ Capacitor C1 positive terminal 8 NC No Connection Submit Documentation Feedback Copyright (c) 1999-2013, Texas Instruments Incorporated Product Folder Links: LM2682 3 LM2682 SNVS044B - NOVEMBER 1999 - REVISED MAY 2013 www.ti.com Typical Performance Characteristics VIN = 5V and TA = 25C unless otherwise noted. Output Resistance vs Input Voltage Output Voltage vs Load Current Figure 1. Figure 2. Supply Current vs Input Voltage Output Resistance vs Temperature Figure 3. Figure 4. Output Voltage Ripple vs Load Current Figure 5. 4 Submit Documentation Feedback Copyright (c) 1999-2013, Texas Instruments Incorporated Product Folder Links: LM2682 LM2682 www.ti.com SNVS044B - NOVEMBER 1999 - REVISED MAY 2013 BASIC APPLICATION CIRCUITS Figure 6. Doubling Voltage Inverter Figure 7. +5V to -5V Regulated Voltage Converter Submit Documentation Feedback Copyright (c) 1999-2013, Texas Instruments Incorporated Product Folder Links: LM2682 5 LM2682 SNVS044B - NOVEMBER 1999 - REVISED MAY 2013 www.ti.com APPLICATION INFORMATION VOLTAGE DOUBLING INVERTER The main application of the LM2682 is to generate a negative voltage that is twice the positive input voltage. This circuit requires only three external capacitors and is connected as shown in Figure 6. It is important to keep in mind that the efficiency of the circuit is determined by the output resistance. A derivation of the output resistance is shown below: ROUT = 2(RSW1+RSW2+ESRC1+RSW3+RSW4+ESRC2) +2(RSW1+RSW2+ESRC1+RSW3+RSW4+ESRC2) + 1/(fOSCxC1) + 1/(fOSCxC2) + ESRC3 Using the assumption that all four switches have the same ON resistance our equation becomes: ROUT = 16RSW + 4ESRC1 + 4ESRC2 + ESRC3 + 1/(fOSCxC1) + 1/(fOSCxC2) Output resistance is typically 90 with an input voltage of +5V, an operating temperature of 25C, and using low ESR 3.3 F capacitors. This equation shows the importance of capacitor selection. Large value, low ESR capacitors will reduce the output resistance significantly but will also require a larger overall circuit. Smaller capacitors will take up less space but can lower efficiency greatly if the ESR is large. Also to be considered is that C1 must be rated at 6 VDC or greater while C2 and C3 must be rated at 12 VDC or greater. The amount of output voltage ripple is determined by the output capacitor C3 and the output current as shown in this equation: VRIPPLE P-P = IOUT x (2xESRC3 + 1/[2x(fOSCxC3)]) Once again a larger capacitor with smaller ESR will give better results. +5V TO -5V REGULATED VOLTAGE CONVERTER Another application in which the LM2682 can be used is for generating a -5V regulated supply from a +5V unregulated supply. This involves using an op-amp and a reference and is connected as shown in Figure 7. The LM358 op-amp was chosen for its low cost and versatility and the LM4040-5.0 reference was chosen for its low bias current requirement. Of course other combinations may be used at the designer's discretion to fit accuracy, efficiency, and cost requirements. With this configuration the circuit is well regulated and is still capable of providing nearly 10 mA of output current. With a 9 mA load the circuit can typically maintain 5% regulation on the output voltage with the input varying anywhere from 4.5V to the maximum of 5.5V. With less load the results are even better. Voltage ripple concerns are reduced in this case since the ripple at the output of the LM2682 is reduced at the output by the PSRR of the op-amp used. 6 Submit Documentation Feedback Copyright (c) 1999-2013, Texas Instruments Incorporated Product Folder Links: LM2682 LM2682 www.ti.com SNVS044B - NOVEMBER 1999 - REVISED MAY 2013 PARALLELING DEVICES Any number of devices can be paralleled to reduce the output resistance. As shown in Figure 8, each device must have its own pumping capacitors, C1 and C2, but only one shared output capacitor is required. The effective output resistance is the output resistance of one device divided by the number of devices used in parallel. Paralleling devices also gives the capability of increasing the maximum output current. The maximum output current now becomes the maximum output current for one device multiplied by the number of devices used in parallel. For example, if you parallel two devices you can get 20 mA of output current and have half the output resistance of one device supplying 10 mA. Figure 8. Paralleling Devices Submit Documentation Feedback Copyright (c) 1999-2013, Texas Instruments Incorporated Product Folder Links: LM2682 7 LM2682 SNVS044B - NOVEMBER 1999 - REVISED MAY 2013 www.ti.com REVISION HISTORY Changes from Revision A (May 2013) to Revision B * 8 Page Changed layout of National Data Sheet to TI format ............................................................................................................ 7 Submit Documentation Feedback Copyright (c) 1999-2013, Texas Instruments Incorporated Product Folder Links: LM2682 PACKAGE OPTION ADDENDUM www.ti.com 21-Oct-2014 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) LM2682MM/NOPB ACTIVE VSSOP DGK 8 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 S11A LM2682MMX/NOPB ACTIVE VSSOP DGK 8 3500 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 S11A (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 21-Oct-2014 In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 23-Sep-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant LM2682MM/NOPB VSSOP DGK 8 1000 178.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1 LM2682MMX/NOPB VSSOP DGK 8 3500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 23-Sep-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM2682MM/NOPB VSSOP DGK 8 1000 210.0 185.0 35.0 LM2682MMX/NOPB VSSOP DGK 8 3500 367.0 367.0 35.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2016, Texas Instruments Incorporated Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments: LM2682MM LM2682MM/NOPB LM2682MMX LM2682MMX/NOPB