Wall Baffle Wooden Speaker Assemblies Models WBS8T725 & variations, WBS810T725 Description Features WBS8T725 Bogen Wall Baffle Speakers consist of 8" cone speakers (S86 or S810) pre-assembled into a simulated walnut-finished wooden enclosure with a black grille cloth on front.These wall baffles are handsomely styled and ruggedly built with 3/8" particle board reinforced at the corners. Designed for wall mounting, the face is angled downward 13.5 degrees. Available options include recessed volume control and terminal strip. * 4-watt capacity * 6 oz. or 10 oz. magnet weights * 6 power taps available (4, 2, 1, 1/2, 1/4, 1/8 watts) * Recessed volume control available (V models only) * Works with both 70V and 25V amplifier outputs * Screw terminals available (BR models only) * Simulated walnut finish * Easy wall-mount installation * Pre-assembled for faster installation * Mounting hardware included * 8" cone speaker for excellent audio quality WBS8T725 WBS8T725V WBS8T725BR 4, 2, 1, 1/2, 1/4, 1/8 @25V & 70V 50 Hz12 kHz 95 dBspl 6 oz. WBS8T725BRV WBS810T725 Specifications subject to change without notice. (c) 2008 Bogen Communications, Inc. 54-7777-09A 0808 70 Hz15 kHz 96 dBspl 10 oz. 18 lb. / carton 19 lb. / carton 20 lb. / carton Dimensions Shipping Weight (4/Carton) Screw Terminals (BR) Recessed Volume Control (V) No Volume Control Magnet Weight Sensitivity (4 ft./1W) Frequency Response Model Power Taps (in Watts) Technical Specifications 9-1/2" W x 9-1/2" H x 5-1/4" D (3-1/4" D @ bottom) Architect and Engineer Specifications WBS8T725 The surface-mounting loudspeaker assembly shall be a Bogen model WBS8T725 (or WBS8T725V, WBS8T725BR, or WBS8T725BRV), or equivalent, 8" cone-type loudspeaker having a frequency response of at least 50 Hz to 12 kHz. Axial sensitivity shall be 95 dB, measured at 1-watt/4 feet. The loudspeaker shall have a 6 oz. ceramic magnet and a 3/4" voice coil. A transformer, capable of matching an 8-ohm loudspeaker to a 25-volt or 70-volt line, and providing power taps of 4, 2, 1, 1/2, 1/4, and 1/8 watts shall be included. The transformer primary and secondary leads shall be stripped, tinned, and shall be at least 6" in length. The loudspeaker shall be assembled in a wall baffle for surface mounting, angled 13.5 degrees for downward sound dispersion. The baffle shall be constructed of 3/8" particle board, glued and covered in simulated walnut vinyl. Glue blocks shall be used to reinforce all side corner joints. The speaker opening shall be covered with a black grille cloth. Overall dimensions shall be 9-1/2" W x 9-1/2" H x 5-1/4" D (top) x 3-1/4" D (bottom). (For WBS8T725V add) The assembly shall include a control for adjusting the volume of the loudspeaker. (For WBS8T725BR add) A terminal strip shall be included for connection of the audio line. Terminals shall be labeled for 4, 2, 1, 1/2, 1/4, and 1/8-watt power connection. (For WBS8T725BRV add) A terminal strip shall be included for connection of the audio line. Terminals shall be labeled for 4, 2, 1, 1/2, 1/4, and 1/8watt power connection.A control shall also be included for adjusting the volume of the loudspeaker. WBS810T725 The surface mounting loudspeaker shall be a Bogen model WBS810T725, or equivalent, 8" cone-type loudspeaker having a frequency response of at least 70 Hz to 15 kHz. Axial sensitivity shall be 96 dB, measured at 1-watt/4-feet. The loudspeaker shall have a 10 oz. ceramic magnet and a 1" voice coil. A transformer, capable of matching an 8-ohm loudspeaker to a 25-volt or 70-volt line, and providing power taps of 4, 2, 1, 1/2, 1/4, and 1/8 watts shall be included. The transformer primary and secondary leads shall be stripped, tinned, and shall be at least 6" in length. The loudspeaker shall be assembled in a wall baffle for surface mounting, angled 13.5 degrees for downward sound dispersion. The baffle shall be constructed of 3/8" particle board, glued and covered in simulated walnut vinyl. Glue blocks shall be used to reinforce all side corner joints. The speaker opening shall be covered with a black grille cloth. Overall dimensions shall be 9-1/2" W x 9-1/2" H x 5-1/4" D (top) x 3-1/4" D (bottom). Line Drawings WBS8T725BR Rear View Side View 50 Spring Street, Ramsey, NJ 07446, U.S.A. Tel: 201-934-8500; FAX: 201-934-9832; www.bogen.com