DFE252012C
Inductance Range: 0.47~10H
(Unit: mm) (Unit: mm)
FEATURES
Miniature size: 2520 footprint (2.5mm×2.0mm) and low
profile(1.2mm Max. height)
The use of magnetic iron powder ensure capability fo
r
large current.
The use of Flat wire for Low DC resistance.
Magnetically shielded, low audible core noise.
Reflow solderable.
Operating temperature : -40+85°C
Halogen Free, RoHS compliant.
小型薄型構造 (2.52.0mm角、高さ1.2mm Max.)
磁性材に鉄系磁性粉を用いた大電流対応
平角線採用による低直流抵抗
閉磁路構造、低コア鳴きノイズ
リフロはんだ対応
動作温度範囲:-40+85°C
ハロゲンフリー、RoHS指令対応
TOKO STANDARD PART NUMBERS 標準品一覧
TYPE DFE252012C (Quantity/reel; 3,000 PCS)
東光品番 インダクタンス 許容差 測定周波数 直流抵抗 最大許容電流
Rated DC Current
(A) Max. (Ty p . )
TOKO Part
Number Induct anc e
L(H) Tolerance
(%)
Test
Frequency
(MHz)
DC Resistan ce
(m)
Max. (Typ .) ΔL/L=30% ΔT=40C
1239AS-H-R47M 0.47 20 1 39 (29) 3.8 (4.7) 3.7 (4.4)
1239AS-H-1R0M 1.0 20 1 59 (45) 3.0 (3.8) 3.0 (3.5)
1239AS-H-1R5M 1.5 20 1 72 (60) 2.6 (3.3) 2.4 (2.8)
1239AS-H-2R2M 2.2 20 1 108 (90) 2.2 (2.7) 2.0 (2.3)
1239AS-H-3R3M 3.3 20 1 144 (120) 1.8 (2.3) 1.5 (1.7)
1239AS-H-4R7M 4.7 20 1 240 (200) 1.5 (1.9) 1.3 (1.5)
1239AS-H-6R0M 6.0 20 1 275 (240) 1.4 (1.7) 1.1 (1.3)
1239AS-H-100M 10 20 1 460 (400) 1.0 (1.3) 0.85 (1.0)
(1) Inductance is measured with a LCR meter 4284A (Agilent
Technologies) or equivalent. Test frequency at 1MHz
(2) DC resistance is measured with 34420A (Agilent Technologies) or
3541(HIOKI). (Reference ambient temperature 25°C)
(3) Maximum allowable DC current is that which causes a 30%
inductance reduction from the initial value, coil temperature to rise
by 40C whichever is smaller.
(Reference ambient temperature 20°C)
(1) インダクタンスはLCRメータ4284A (Agilent Technologies) また
は同等品により測定する。測定周波数は1MHz
(2) 直流抵抗は測定器34420AAgilent Technologies)または3541
HIOKI)と同等品により測定する。(周囲温度25°C
(3) 最大許容電流は、直流重畳電流を流した時インダクタンスの値が
初期値より30%減少する直流電流値、または直流電流により
コイルの温度が40°C上昇の何れか小さい値。
(周囲温度20°Cを基準とする。)
Recommended patterns
推奨パターン図
Met al Alloy Inductors
メタルアロイ®インダクタ