Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 32 | Polyamide PA 6.6 | Modular feed-through terminals | 10 mm General ordering data Order No. Part designation Version EAN Qty. Product notes Note, ordering data Note, technical data PT OKIECEx/ATEX rating data EU-type examination certificate Download, German Download English IECEx Certificate of Conformity ATEX voltage ATEX current ATEX conductor cross-section IECEx voltage IECEx current IECEx conductor cross-section Voltage when using cross-connections Operating temperature range 0110080000 SAK 10 BL Feed-through terminal, 10 mm, Screw connection, PA 66, blue, TS 32 4008190151799 100 pc(s). A higher torque of 2 to 2.4 Nm is necessary when using H07V-R16 and AWG 6 conductors. When used with twin ferrules ZH 0.5 - ZH 4, the rated voltage is 690 V. Marking EN 60079-7 Marking ATEX Directive 94/9/EC KEMA97ATEX1798U KEMA97ATEX1798U_d.pdf KEMA97ATEX1798U_e.pdf IECEXKEM06.0014U 550 V 50 A 10 mm 550 V 50 A 10 mm CrossConnectionGuide.pdf Einsatztemperaturbereich siehe EGBaumusterprufbescheinigung/IECEx-Certificate of Conformity Ex e II Ex II 2 G D Additional technical data Colour of insulating material Connection direction End plate required Explosion-tested version "Ex e" Installation advice Insulating material Levels cross-connected internally No. of identical terminals No. of levels No. of terminal strips per level Open sides Operating temperature range Type of connection Type of mounting UL 94 flammability rating of insulation material Version blue on side Yes No TS 32 PA 66 No 1 1 2 right - 50 C, + 100 C Screwed Snap-on V2 Feed-through terminal -1- Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 32 | Polyamide PA 6.6 | Modular feed-through terminals | 10 mm CSA rating data Voltage (CSA) CSA current Min. cross-section (CSA) Max. cross-section (CSA) 600 V 65 A AWG 16 AWG 6 Conductors for clamping (additional connection) Flexible with ferrule, min. (DIN 46228 pt 1) Flexible with ferrule, max. (DIN 46228 pt 1) 1.5 mm 10 mm Conductors for clamping (rated connection) Clamping range, min. Clamping range, max. Type of connection 2nd type of connection Connection direction No. of connections Stripping length Clamping screw Blade size Tightening torque range Gauge to IEC 60947-1 Solid, min. Solid, max. Stranded, min. Stranded, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228/1) Flexible with ferrule, max. (DIN 46228/1) Flexible, min., ferrule with plastic collar (DIN 46228 pt 4) Flexible, max., ferrule with plastic collar (DIN 46228 pt 4) Twin wire-end ferrule, min. Twin wire end ferrule, max. AWG conductor size, min. AWG conductor size, max. AWG conductor size, max. 1.5 mm 16 mm Screw connection screwed on side 2 12 mm M4 1.0 x 5.5 mm 2.0...4.0 Nm B6 1.5 mm 10 mm 1.5 mm 16 mm 1.5 mm 16 mm 1.5 mm 10 mm 1.5 mm 10 mm 0.75 mm 6 mm AWG 14 AWG 6 13.3 mm Dimensions Width Height of lowest version Length TS 32 offset 10 mm 51.5 mm 40 mm 20 mm Rating data Rated cross-section Rated voltage Rated impulse voltage Rated current 10 mm 800 V 8 kV 57 A -2- Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 32 | Polyamide PA 6.6 | Modular feed-through terminals | 10 mm Rating data Standards Current with max. conductor Pollution severity IEC 60947-7-1 76 A 3 UL rating data Voltage (UL) Current (UL) Min. cross-section (UL) Max. cross-section (UL) 600 V 60 A AWG 14 AWG 6 Approvals Approvals institutes Classifications ETIM 2.0 ETIM 3.0 eClass 4.1 eClass 5.0 eClass 5.1 EC000897 EC000897 27-14-11-20 27-14-11-20 27-14-11-20 Similar products Order No. 0110060000 Part designation SAK 10 Version Feed-through terminal, 10 mm, Screw connection, PA 66, beige, TS 32 -3-