Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 32 | Polyamide PA 6.6 |
Modular feed-through terminals | 10 mm²
- 1 -
General ordering data
Order No. 0110080000
Part designation SAK 10 BL
Version Feed-through terminal, 10 mm², Screw
connection, PA 66, blue, TS 32
EAN 4008190151799
Qty. 100 pc(s).
Product notes
Note, ordering data A higher torque of 2 to 2.4 Nm is necessary when
using H07V-R16 and AWG 6 conductors.
Note, technical data When used with twin ferrules ZH 0.5 - ZH 4, the
rated voltage is 690 V.
PT OKIECEx/ATEX rating data
EU-type examination certificate KEMA97ATEX1798U
Download, German KEMA97ATEX1798U_d.pdf
Download English KEMA97ATEX1798U_e.pdf
IECEx Certificate of Conformity IECEXKEM06.0014U
ATEX voltage 550 V
ATEX current 50 A
ATEX conductor cross-section 10 mm²
IECEx voltage 550 V
IECEx current 50 A
IECEx conductor cross-section 10 mm²
Voltage when using cross-connections CrossConnectionGuide.pdf
Operating temperature range Einsatztemperaturbereich siehe EG-
Baumusterprüfbescheinigung/IECEx-Certificate of
Conformity
Marking EN 60079-7 Ex e II
Marking ATEX Directive 94/9/EC Ex II 2 G D
Additional technical data
Colour of insulating material blue
Connection direction on side
End plate required Yes
Explosion-tested version "Ex e" No
Installation advice TS 32
Insulating material PA 66
Levels cross-connected internally No
No. of identical terminals 1
No. of levels 1
No. of terminal strips per level 2
Open sides right
Operating temperature range - 50 °C, + 100 °C
Type of connection Screwed
Type of mounting Snap-on
UL 94 flammability rating of insulation material V2
Version Feed-through terminal
Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 32 | Polyamide PA 6.6 |
Modular feed-through terminals | 10 mm²
- 2 -
CSA rating data
Voltage (CSA) 600 V
CSA current 65 A
Min. cross-section (CSA) AWG 16
Max. cross-section (CSA) AWG 6
Conductors for clamping (additional
connection)
Flexible with ferrule, min. (DIN 46228 pt 1) 1.5 mm²
Flexible with ferrule, max. (DIN 46228 pt 1) 10 mm²
Conductors for clamping (rated connection)
Clamping range, min. 1.5 mm²
Clamping range, max. 16 mm²
Type of connection Screw connection
2nd type of connection screwed
Connection direction on side
No. of connections 2
Stripping length 12 mm
Clamping screw M 4
Blade size 1.0 x 5.5 mm
Tightening torque range 2.0...4.0 Nm
Gauge to IEC 60947-1 B6
Solid, min. 1.5 mm²
Solid, max. 10 mm²
Stranded, min. 1.5 mm²
Stranded, max. 16 mm²
Flexible, min. 1.5 mm²
Flexible, max. 16 mm²
Flexible with ferrule, min. (DIN 46228/1) 1.5 mm²
Flexible with ferrule, max. (DIN 46228/1) 10 mm²
Flexible, min., ferrule with plastic collar (DIN
46228 pt 4)
1.5 mm²
Flexible, max., ferrule with plastic collar (DIN
46228 pt 4)
10 mm²
Twin wire-end ferrule, min. 0.75 mm²
Twin wire end ferrule, max. 6 mm²
AWG conductor size, min. AWG 14
AWG conductor size, max. AWG 6
AWG conductor size, max. 13.3 mm²
Dimensions
Width 10 mm
Height of lowest version 51.5 mm
Length 40 mm
TS 32 offset 20 mm
Rating data
Rated cross-section 10 mm²
Rated voltage 800 V
Rated impulse voltage 8 kV
Rated current 57 A
Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 32 | Polyamide PA 6.6 |
Modular feed-through terminals | 10 mm²
- 3 -
Rating data
Standards IEC 60947-7-1
Current with max. conductor 76 A
Pollution severity 3
UL rating data
Voltage (UL) 600 V
Current (UL) 60 A
Min. cross-section (UL) AWG 14
Max. cross-section (UL) AWG 6
Approvals
Approvals institutes
Classifications
ETIM 2.0 EC000897
ETIM 3.0 EC000897
eClass 4.1 27-14-11-20
eClass 5.0 27-14-11-20
eClass 5.1 27-14-11-20
Similar products
Order No. Part designation Version
0110060000 SAK 10 Feed-through terminal, 10 mm², Screw connection, PA 66, beige, TS
32
