PHOTOCOUPLER PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 HIGH ISOLATION VOLTAGE AC INPUT RESPONSE TYPE MULTI PHOTOCOUPLER SERIES NEPOC Series DESCRIPTION The PS2565-1 is optically coupled isolators containing GaAs light emitting diodes and an NPN silicon phototransistor. The PS2565-1 is in a plastic DIP (Dual In-line Package) and the PS2565L-1 is lead bending type (Gull-wing) for surface mount. The PS2565L1-1 is lead bending type for long creepage distance. The PS2565L2-1 is lead bending type for long creepage distance (Gull-wing) for surface mount. FEATURES * AC input response * High Isolation voltage (BV = 5 000 Vr.m.s.) * High collector to emitter voltage (VCEO = 80 V) * High current transfer ratio (CTR = 200% TYP.) * High-speed switching (tr = 3 s TYP., tf = 5 s TYP.) * Ordering number of taping product: PS2565L-1-F3 : 2 000 pcs/reel * Safety standards : PS2565L2-1-E3: 1 000 pcs/reel * UL approved: No. E72422 * CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950) * BSI approved: No. 7112/7420 * SEMKO approved: No. 903238 * NEMKO approved: No. P09210868 * DEMKO approved: No. 314999 * FIMKO approved: No. FI 25119 * DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40008862 (Option) APPLICATIONS * Telephone/FAX. * FA/OA equipment * Programmable logic controller Document No. PN10236EJ05V0DS (5th edition) Date Published November 2009 NS The mark shows major revised points. The revised points can be easily searched by copying an "" in the PDF file and specifying it in the "Find what:" field. PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 PACKAGE DIMENSIONS (UNIT : mm) DIP Type Long Creepage Distance Lead Bending Type (Gull-Wing) Long Creepage Distance (Gull-Wing) PHOTOCOUPLER CONSTRUCTION Parameter Unit (MIN.) Air Distance 7 mm Outer Creepage Distance 7 mm Inner Creepage Distance 4 mm Isolation Thickness 2 0.4 mm Data Sheet PN10236EJ05V0DS PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 MARKING EXAMPLE Data Sheet PN10236EJ05V0DS 3 PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 ORDERING INFORMATION Part Number Order Number Solder Plating Specification Pb-Free Packing Style Magazine case 100 pcs Safety Standard Approval PS2565-1 PS2565-1-A Standard products PS2565L-1 PS2565L-1-A (UL, CSA, BSI, PS2565L1-1 PS2565L1-1-A SEMKO, NEMKO, PS2565L2-1 PS2565L2-1-A DEMKO, FIMKO PS2565L-1-F3 PS2565L-1-F3-A Embossed Tape 2 000 pcs/reel PS2565L2-1-E3 PS2565L2-1-E3-A Embossed Tape 1 000 pcs/reel PS2565-1-V PS2565-1-V-A Magazine case 100 pcs PS2565L-1-V PS2565L-1-V-A (VDE0884 Part2) PS2565L1-1-V PS2565L1-1-V-A approved products PS2565L2-1-V PS2565L2-1-V-A (option) PS2565L-1-V-F3 PS2565L-1-V-F3-A Embossed Tape 2 000 pcs/reel PS2565L2-1-V-E3 PS2565L2-1-V-E3-A Embossed Tape 1 000 pcs/reel PS2565-1 PS2565-1Y-A Special version Magazine case 100 pcs Standard products PS2565L-1 PS2565L-1Y-A (Pb-Free and (UL, CSA, BSI, PS2565L1-1 PS2565L1-1Y-A Halogen Free) SEMKO, NEMKO, PS2565L2-1 PS2565L2-1Y-A PS2565L-1-F3 PS2565L-1Y-F3-A Embossed Tape 2 000 pcs/reel PS2565L2-1-E3 PS2565L2-1Y-E3-A Embossed Tape 1 000 pcs/reel PS2565-1-V PS2565-1Y-V-A Magazine case 100 pcs PS2565L-1-V PS2565L-1Y-V-A (VDE0884 Part2) PS2565L1-1-V PS2565L1-1Y-V-A approved products PS2565L2-1-V PS2565L2-1Y-V-A (option) PS2565L-1-V-F3 PS2565L-1Y-V-F3-A Embossed Tape 2 000 pcs/reel PS2565L2-1-V-E3 PS2565L2-1Y-V-E3-A Embossed Tape 1 000 pcs/reel DIN EN60747-5-2 DEMKO, FIMKO Data Sheet PN10236EJ05V0DS PS2565-1 approved) approved) DIN EN60747-5-2 *1 For the application of the Safety Standard, following part number should be used. 4 Application Part Number *1 PS2565-1 PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified) Parameter Symbol Ratings Unit IF 80 mA 1.5 mW/ C PD 150 mW IFP 1 A Collector to Emitter Voltage VCEO 80 V Emitter to Collector Voltage VECO 7 V IC 50 mA 1.5 mW/ C PC 150 mW BV 5 000 Vr.m.s. Operating Ambient Temperature TA -55 to +100 C Storage Temperature Tstg -55 to +150 C Diode Forward Current (DC) Power Dissipation Derating Power Dissipation Peak Forward Current Transistor *1 Collector Current Power Dissipation Derating Power Dissipation Isolation Voltage *2 PD/ C PC/ C *1 PW = 100 s, Duty Cycle = 1% *2 AC voltage for 1 minute at TA = 25 C, RH = 60% between input and output. Pins 1-2 shorted together, 3-4 shorted together. Data Sheet PN10236EJ05V0DS 5 PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 ELECTRICAL CHARACTERISTICS (TA = 25 C) Parameter Diode Symbol Conditions MIN. MAX. Unit 1.4 V Forward Voltage VF IF = 10 mA 1.17 Terminal Capacitance Ct V = 0 V, f = 1.0 MHz 100 Transistor Collector to Emitter Dark Current ICEO VCE = 80 V, IF = 0 mA Coupled Current Transfer Ratio (IC/IF) CTR IF = 5 mA, VCE = 5 V 80 CTR Ratio*1 CTR1/ CTR2 IF = 5 mA, VCE = 5 V 0.3 Collector Saturation Voltage VCE (sat) IF = 10 mA, IC = 2 mA Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz *2 tr Rise Time *2 Fall Time VCC = 10 V, IC = 2 mA, RL = 100 tf *2 Test circuit for switching time Data Sheet PN10236EJ05V0DS pF 100 nA 200 400 % 1.0 3.0 0.3 V 1011 0.5 pF 3 s 5 *1 CTR1 = IC1/IF1, CTR2 = IC2/IF2 6 TYP. PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified) Remark The graphs indicate nominal characteristics. Data Sheet PN10236EJ05V0DS 7 PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 Remark 8 The graphs indicate nominal characteristics. Data Sheet PN10236EJ05V0DS PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 Remark The graph indicates nominal characteristics. Data Sheet PN10236EJ05V0DS 9 PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 TAPING SPECIFICATIONS (UNIT : mm) 10 Data Sheet PN10236EJ05V0DS PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 Data Sheet PN10236EJ05V0DS 11 PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature 260 C or below (package surface temperature) * Time of peak reflow temperature 10 seconds or less * Time of temperature higher than 220 C 60 seconds or less * Time to preheat temperature from 120 to 180 C 120 30 s * Number of reflows Three * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (2) Wave soldering * Temperature 260 C or below (molten solder temperature) * Time 10 seconds or less * Preheating conditions 120 C or below (package surface temperature) * Number of times One (Allowed to be dipped in solder including plastic mold portion.) * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron * Peak temperature (lead part temperature) 350 C or below * Time (each pins) 3 seconds or less * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100 C. 12 Data Sheet PN10236EJ05V0DS PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 (4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler Check the setting values before use, since the forward current conditions at CTR measurement differ according to product. When using products other than at the specified forward current, the characteristics curves may differ from the standard curves due to CTR value variations or the like. This tendency may sometimes be obvious, especially below IF = 1 mA. Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the like into consideration before use. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10236EJ05V0DS 13 PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Symbol Climatic test class (IEC 60068-1/DIN EN 60068-1) Spec. Unit 55/100/21 Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) Upr = 1.5 UIORM, Pd 5 pC UIORM Upr 890 1 335 Vpeak Vpeak Test voltage (partial discharge test, procedure b for all devices) Upr = 1.875 UIORM, Pd 5 pC Upr 1 669 Vpeak Highest permissible overvoltage UTR 8 000 Vpeak Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11)) 2 CTI Material group (DIN EN 60664-1 VDE0110 Part 1) 175 III a Storage temperature range Tstg -55 to +150 C Operating temperature range TA -55 to +100 C Ris MIN. Ris MIN. 1012 1011 Tsi Isi Psi 175 400 700 Ris MIN. 109 Isolation resistance, minimum value VIO = 500 V dc at TA = 25 C VIO = 500 V dc at TA MAX. at least 100C Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current IF, Psi = 0) Power (output or total power dissipation) Isolation resistance VIO = 500 V dc at TA = Tsi 14 Data Sheet PN10236EJ05V0DS C mA mW PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 Data Sheet PN10236EJ05V0DS 15 PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth.