SaRonix TM PrO Programmable Clock Oscillator Technical Data ACTUAL SIZE Description A crystal controlled, HCMOS/TTL compatible oscillator with an internal programming feature that allows SaRonix to supply any frequency in the 1 to 125MHz range. This technology significantly reduces lead-times from weeks to days. The parts are built and stocked un-programmed then programmed by SaRonix to the frequency required by the customer before final test and marking. The parts exhibit the same low power, precise rise and fall times, tight symmetry and HCMOS/TTL compatible drive capability as conventional SaRonix SMD oscillators. The parts feature tri-state enable or standby control on pin 1. The packages are fully compatible with standard SO-J-20 footprints. Applications & Features * Quick delivery - days instead of weeks for any frequency - standard or not between 1 and 125MHz. * Suited for use with new HCMOS MPU's. * Tri-State output or standby mode * High Drive HCMOS capability * Stabilities of 25, 50, 100ppm * EIA standard SO-J-20 footprint * Fully compatible with the Epson SG-8002JA Series configurations. * Other SaRonix products with compatible electrical and mechanical specifications are available, please see data sheets for the ST410H or NTH/NCH H. Example PN: S8002HSHB - 106.2500 SaRonix 5V, HCMOS, TTL, SMD PrOTM S8002 Series Frequency Range: 1MHz to 125MHz Frequency Stability: 25*, 50 or 100 ppm over all conditions: calibration tolerance, operating temperature, input voltage change, load change, aging, shock and vibration. Temperature Range: Operating: Storage: -20 to +70C or -40 to +85C -55 to +125C Supply Voltage: Recommended Operating: +5V 10% Supply Current: 10TTL / 5TTL Load: 50pF / 20pF Load: 40mA from 1 to 40MHz, 50mA from 40+ to 125MHz 40mA from 1 to 50MHz, 50mA from 50+ to 125MHz Standby Current: 50A max (use option S, see part number builder) Output Drive: Symmetry: -20 to +70C: -40 to +85C: Rise & Fall Times: Logic 0: Logic 1: Load: Jitter, peak-to-peak: @ 1.5V @ 50% VDD @ 1.5V @ 50% VDD TTL TTL HCMOS HCMOS 27+ to 125MHz 1 to 27MHz 1 to 50MHz 50+ to 125MHz 40/60% 45/55% 45/55% 40/60% 40/60% 40/60% 40/60% 40/60% 5ns max 20% to 80% V DD, 0.8 to 2V (TTL) 10% V DD max, 0.5V max (TTL) 90% V DD min, 2.5V min (TTL) 50pF max 1 to 50MHz, 20pF max 50+ to 125MHz or 10TTL 1 to 40MHz, 5TTL 40+ to 125MHz 100ps typ, 200ps max 33+ to 125MHz 200ps typ, 550ps max 1 to 33MHz Mechanical: Shock: Solderability: Terminal Strength: Vibration: Solvent Resistance: Resistance to Soldering Heat: Environmental: Thermal Shock: Moisture Resistance: MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2003 MIL-STD-883, Method 2004, Conditions B2 MIL-STD-883, Method 2007, Condition A MIL-STD-202, Method 215 MIL-STD-202, Method 210, Condition I or J MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 Part Numbering Guide S8002 H S H B - 106.25 Series SaRonix Programmable Oscillator Frequency Package Plastic J-lead P = Output Enable S = Standby Type H = 5V, CMOS T = 5V, TTL *25ppm is only available at certain frequencies, please contact SaRonix. Stability Tolerance *A = 25ppm, -20 to +70C B = 50ppm, -20 to +70C C= 100ppm, -20 to +70C E = 50ppm, -40 to +85C F = 100ppm, -40 to +85C DS-186 REV A September 1998 8.5 141 Jefferson Drive * Menlo Park CA 94025 * USA * 650-470-7700 * 800-227-8974 * Fax 650-462-9894 SaRonix TM PrO Programmable Clock Oscillator 5V, HCMOS, TTL, SMD Technical Data PrOTM S8002 Series Output Waveform Package Details, Type H Tri-State or Standby Logic Table CMOS 4 3 SARONIX 2.0 .079 Tr YYWW 8.95 .352 50.0000 MHz S8002HSHB 1 9.80 max .386 Tr Tf VDD LOGIC 1 80% V DD 50% V DD 2 13.0 max .512 2.5 VDC 1.5 VDC 0.5 VDC 20% V DD LOGIC 0 4.10 .161 4.7 max .185 0.51 .020 TTL Tf Pin 3 Output Logic 1 or NC Oscillation Logic 0 or GND High Impedance/Standby Required Input Levels on Pin 1: Logic 1 = 2.0V min Logic 0 = 0.8V max GND SYMMETRY SYMMETRY Test Circuits 5.08 .200 0.15 .006 7.62 .300 RL = 390 1 to 40 MHz RL = 780 40+ to 125 MHz TEST POINT 0.25 .010 mA M Pin 4 Pin Function: Pin 1: Tri-State Control Pin 2: GND Pin 1 Input Pin 3 VCC Pin 3: Output Pin 4: +5 VDC .01F ( Note B ) VM POWER SUPPLY OUT GND Pin 1 Recommended Land Pattern MMBD7000 or Equiv Pin 2 1.78 .070 * CL = 15pF ( Note A ) OSCILLATOR TRI-STATE INPUT NOTE: A. CL includes probe and fixture capacitance. NOTE: B. An external .01F bypass capacitor close to package ground and VCC pin is required 4 3 FIGURE 1 - TTL TEST CIRCUIT, 5V OPERATION 7.80 .307 1 TEST POINT 2 mA M 2.82 .111 Pin 4 5.08 .200 Pin 3 VCC * External high frequency power supply POWER SUPPLY VM .01F ( Note B ) Pin 1 OUT OSCILLATOR GND Pin 2 CL = 50pF 1 to 50 MHz CL = 20pF 50+ to 125 MHz ( Note A ) mm Scale: None ( Dimensions in ) inches TRI-STATE INPUT Tempe rature - C Solder Reflow Guide 250 200 NOTE: A. CL includes probe and fixture capacitance. NOTE: B. An external .01F bypass capacitor close to package ground and VCC pin is required Reflow 240 max 4C/sec max FIGURE 2 - HCMOS TEST CIRCUIT, 5V OPERATION Cooling Preheat 183 10C 150 4C/sec max All specifications are subject to change without notice. Time 1 - 2 minutes 10 sec max DS-186 REV A September 1998 8.6 SaRonix 141 Jefferson Drive * Menlo Park CA 94025 * USA * 650-470-7700 * 800-227-8974 * Fax 650-462-9894