PrO
TM
Programmable Clock Oscillator
Technical Data PrOTM S8002 Series
SaRonix
141 Jefferson Drive • Menlo Park CA 94025 • USA • 650-470-7700 • 800-227-8974 • Fax 650-462-9894
SaRonix
5V, HCMOS, TTL, SMD
DS-186 REV A September 1998 8.5
Frequency Range:
Description
ACTUAL SIZE
A crystal controlled, HCMOS/TTL com-
patible oscillator with an internal pro-
gramming feature that allows SaRonix to
supply any frequency in the 1 to 125MHz
range. This technology significantly re-
duces lead-times from weeks to days.
The parts are built and stocked un-pro-
grammed then programmed by SaRonix
to the frequency required by the cus-
tomer before final test and marking. The
parts exhibit the same low power, precise
rise and fall times, tight symmetry and
HCMOS/TTL compatible drive capabil-
ity as conventional SaRonix SMD oscil-
lators. The parts feature tri-state enable
or standby control on pin 1. The pack-
ages are fully compatible with standard
SO-J-20 footprints.
1MHz to 125MHz
Frequency Stability: ±25*, ±50 or ±100 ppm over all conditions: calibration
tolerance, operating temperature, input voltage change, load
change, aging, shock and vibration.
Temperature Range:
Operating:
Storage:
-20 to +70°C or -40 to +85°C
-55 to +125°C
Supply Voltage:
Recommended Operating: +5V ±10%
Supply Current:
40mA from 1 to 40MHz, 50mA from 40+ to 125MHz
40mA from 1 to 50MHz, 50mA from 50+ to 125MHz
Output Drive:
Applications & Features
Quick delivery - days instead of weeks
for any frequency - standard or not -
between 1 and 125MHz.
Suited for use with new HCMOS
MPU's.
Tri-State output or standby mode
High Drive HCMOS capability
Stabilities of ±25, ±50, ±100ppm
EIA standard SO-J-20 footprint
Fully compatible with the Epson
SG-8002JA Series configurations.
Other SaRonix products with com-
patible electrical and mechanical
specifications are available, please
see data sheets for the ST410H or
NTH/NCH H.
Symmetry:
-20 to +70°C:
-40 to +85°C:
5ns max 20% to 80% VDD, 0.8 to 2V (TTL)
10% VDD max, 0.5V max (TTL)
90% VDD min, 2.5V min (TTL)
50pF max 1 to 50MHz, 20pF max 50+ to 125MHz or
10TTL 1 to 40MHz, 5TTL 40+ to 125MHz
100ps typ, 200ps max 33+ to 125MHz
200ps typ, 550ps max 1 to 33MHz
Rise & Fall Times:
Logic 0:
Logic 1:
Load:
Jitter, peak-to-peak:
Mechanical:
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2003
MIL-STD-883, Method 2004, Conditions B2
MIL-STD-883, Method 2007, Condition A
MIL-STD-202, Method 215
MIL-STD-202, Method 210, Condition I or J
Shock:
Solderability:
Terminal Strength:
Vibration:
Solvent Resistance:
Resistance to Soldering Heat:
Environmental:
Thermal Shock:
Moisture Resistance:
MIL-STD-883, Method 1011, Condition A
MIL-STD-883, Method 1004
Part Numbering Guide
S8002 H S H B – 106.25
Series
SaRonix Programmable Oscillator
Package
Plastic J-lead Stability Tolerance
*A = ±25ppm, -20 to +70°C
B = ±50ppm, -20 to +70°C
C= ±100ppm, -20 to +70°C
E = ±50ppm, -40 to +85°C
F = ±100ppm, -40 to +85°C
P = Output Enable
S = Standby
Frequency
Example PN: S8002HSHB - 106.2500
10TTL / 5TTL Load:
50pF / 20pF Load:
@ 50% VDD
HCMOS
1 to 50MHz
45/55%
40/60%
@ 50% VDD
HCMOS
50+ to 125MHz
40/60%
40/60%
@ 1.5V
TTL
1 to 27MHz
45/55%
40/60%
@ 1.5V
TTL
27+ to 125MHz
40/60%
40/60%
Type
H = 5V, CMOS
T = 5V, TTL
*±25ppm is only available at certain frequencies,
please contact SaRonix.
Standby Current: 50µA max (use option S, see part number builder)
All specifications are subject to change without notice.
SaRonix
PrO
TM
Programmable Clock Oscillator
Technical Data PrOTM S8002 Series
141 Jefferson Drive • Menlo Park CA 94025 • USA • 650-470-7700 • 800-227-8974 • Fax 650-462-9894
SaRonix
5V, HCMOS, TTL, SMD
DS-186 REV A September 1998
8.6
Package Details, Type H Tri-State or Standby Logic Table
Output Waveform
Pin 1 Input
Logic 1 or NC
Logic 0 or GND
Pin 3 Output
Oscillation
High Impedance/Standby
Required Input Levels on Pin 1:
Logic 1 = 2.0V min
Logic 0 = 0.8V max
Pin 1: Tri-State Control
Pin 2: GND
Pin 3: Output
Pin 4: +5 VDC
Pin Function:
2.0
.079
8.95
.352
9.80
.386 max
13.0
.512 max
4.7
.185 max
4.10
.161
0.51
.020
5.08
.200
0.15
.006
7.62
.300
0.25
.010
Recommended Land Pattern
21
4 3
2.5 VDC
1.5 VDC
0.5 VDC
Tf
TfTr
Tr
CMOS TTL
SYMMETRY SYMMETRY
GND
VDD
LOGIC 0
20% VDD
50% VDD
80% VDD
LOGIC 1
*
Scale: None ( Dimensions in )
mm
inches
*External high frequency power supply
1.78
.070
2.82
.111
12
4 3
5.08
.200
7.80
.307
SARONIX
YYWW
50.0000 MHz
S8002HSHB
TRI-STATE INPUT
TEST
POINT
.01µF
( Note B )
Pin 4 Pin 3
VCC OUT
OSCILLATOR
GND
Pin 1 Pin 2
mA
M
V M
POWER
SUPPLY
NOTE: A. CL includes probe and fixture capacitance.
NOTE: B. An external .01µF bypass capacitor close to
package ground and VCC pin is required
FIGURE 2 - HCMOS TEST CIRCUIT, 5V OPERATION
NOTE: A. CL includes probe and fixture capacitance.
NOTE: B. An external .01µF bypass capacitor close to
package ground and VCC pin is required
FIGURE 1 - TTL TEST CIRCUIT, 5V OPERATION
TRI-STATE INPUT
POWER
SUPPLY
mA
M
V M
Pin 4 Pin 3
VCC OUT
OSCILLATOR
GND
Pin 2Pin 1
.01µF
( Note B )
TEST
POINT
CL = 15pF
( Note A ) MMBD7000
or Equiv
RL = 390
1 to 40 MHz
RL = 780
40+ to 125 MHz
Test Circuits
CL = 50pF
1 to 50 MHz
CL = 20pF
50+ to 125 MHz
( Note A )
Solder Reflow Guide
Preheat 183 ±10°C
4°C/sec max
Reflow 240 max
Cooling
4°C/sec max
1 – 2 minutesTime 10 sec max
150
200
250
Tempe rature °C