Model 366
DESCRIPTION
The 366 low range torque watch gage series accurately mea-
sures very low torque. Three miniature adapter chucks allow sim-
ple coupling to the device being measured. To minimize friction,
a calibrated spring, shaft, and pointer assembly are mounted in
jeweled bearings. The unit can measure torque in either a clock-
wise or counterclockwise direction. A stainless steel internal
rotation stop helps prevent damage from over-torque up to three
times the normal range.
FEATURES
• 0.2gm-cmto42gm-cm[0.003in-ozto0.6in-oz]capacities
• 5%(366-0)and10%(366-2,366-3)accuracy
• Threeminiatureadapterchucksavailable
• Dialindication(standard)
• Overloadprotection
Low Range Torque Watch Gauge Series
Sensing and Control
Automation and Control Solutions
Honeywell
1985DouglasDriveNorth
GoldenValley,MN55422USA
+1-815-235-6847
www.honeywell.com/sensing
008786-1-EN IL50 GLO
June 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Model 366 Low Range Torque Watch Gauge Series
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and tness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensingorcall+1-815-235-6847
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
•DONOTUSEtheseproductsassafetyoremergency
stopdevicesorinanyotherapplicationwherefailureof
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
•Theinformationpresentedinthiscatalogueisfor
referenceonly.DONOTUSEthisdocumentasproduct
installationinformation.
•Completeinstallation,operationandmaintenance
informationisprovidedintheinstructionssuppliedwith
each product.
Failure to comply with these instructions could result in
death or serious injury.
Standard Metric
Model Order
codes
oz-in Model Order
codes
gm-
cm
Accuracy
366-0 TQ3660 0.06to
0.6
366-0M TQ3660M 6 to
42
±5%
366-2 TQ3662 0.01to
0.1
366-2M TQ3662M 1to
7.5
±10%
366-3 TQ3663 0.003
to0.03
366-3M TQ3663M 0.2
to2
±10%