DC/DC Converters THN 15WI Series, 15 Watt CB Scheme Features Smallest encapsulated 15W Converter! UL 60950-1 UL 60950-1 Ultra compact size: 1.0" x 1.0" x 0.4" Shielded metal case with isolated baseplate Ultrawide 4:1 input ranges 9-36 VDC or 18-75VDC Output voltage Trim I/O- isolation voltage 1500 VDC Very high efficiency up to 87% Operating temp. range : -40C to +85C Remote On/Off control Industry standard pinout 3-year product warranty The THN-15WI series is the latest generation of high performance dc-dc converter modules setting new standards concerning power density. This product with 15W comes in a encapsulated, shielded metal package with dimensions of only 1.0"x 1.0"x 0.4" and occupies 50% (!) less board space. All models have ultra wide 4:1 input voltage range and precisely regulated output voltages. Advanced circuit design provides high efficiency up to 87% which allows a operating temperature range of -40c to +85C (with derating) Further features include remote On/Off, trimable output and Basic Insulation. This product is fully compliant to RoHS directive. Typical applications for these converters are battery operated equipment, mobile instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on PCB is critical. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. THN 15-2410WI 3.3 VDC 4`000 mA 86 % THN 15-2411WI 5.0 VDC 3`000 mA 86 % 12 VDC 1`300 mA 87 % THN 15-2412WI 9 - 36 VDC THN 15-2413WI (24 VDC nominal) 15 VDC 1'000 mA 87 % THN 15-2421WI 5 VDC 1'500 mA 85 % THN 15-2422WI 12 VDC 625 mA 87 % THN 15-2423WI 15 VDC 500 mA 88 % THN 15-4810WI 3.3 VDC 4`000 mA 86 % THN 15-4811WI 5.0 VDC 3`000 mA 86 % THN 15-4812WI 18 - 75 VDC 12 VDC 1`300 mA 87 % THN 15-4813WI (48 VDC nominal) 15 VDC 1'000 mA 87 % THN 15-4821WI 5 VDC 1'500 mA 85 % THN 15-4822WI 12 VDC 625 mA 86 % THN 15-4823WI 15 VDC 500 mA 87 % http://www.tracopower.com Page 1 of 3 DC/DC Converters THN 15WI Series 15 Watt Input Specifications Input current at no load 24 Vin; 3.3 VDC 24 Vin; 5 VDC 24 Vin; other 48 Vin; 3.3 & 5 VDC 48 Vin; other models: models: models: models: models: 50 mA typ. 70 mA typ.. 20 mA typ. 40 mA typ. 15 mA typ. Input current at full load 24 Vin; 3.3 VDC 24 Vin; other 48 Vin; 3.3 VDC 48 Vin; other models: models: models: models: 690 mA typ. 770 mA typ.. 340 mA typ. 380 mA typ. Start-up voltage / under voltage shut down 24 Vin models: 9 VDC /8 VDC 48 Vin models: 18 VDC /16 VDC Surge voltage (100 msec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Reflected input ripple current 30 mA typ. Conducted noise (input) EN 55022 level A, FCC part 15, level A with external capacitor see application note. Output Specifications Voltage set accuracy 1 % Output voltage adj. range 10 % only for single output models. see application note. Regulation - Input variation (Vmin - Vmax) single output models: dual output models: - Load variation (0 - 100 %) single output models: dual output models balanced load: dual output models unbalanced load (25% /100%): 0.2 % max. 0.5 % max. 0.2 % max. 1.0 % max. 5.0 % max. Minimum load not required Ripple and noise (20 MHz bandwidth) 100 mVpk-pk max. with external capacitor see application note. Temperature coefficient 0.02 %/K Output current limitation at 150 % of Iout max., foldback Short circuit protection indefinite (automatic recovery) Over voltage protection 3.3 5 12 15 VDC VDC VDC VDC models: models: models: models: 3.7 - 5.4 Vout 5.6 - 7.0 Vout 13.5 - 19.6 Vout 16.8 - 20.5 Vout Start up time (nominal Vin and constant resistive load) 30 ms typ. (for power on and remote on) Transient response setting time (25% load step change) 250 s typ. Max. capacitive load 3.3 & 5 12 15 5 12 15 VDC VDC VDC VDC VDC VDC models: models: models: models: models: models: 1000 F 330 F 220 F 500 F 150 F 100 F Application note Download: www.tracopower.com/products/thn15wi_application.pdf All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters THN 15WI Series 15 Watt General Specifications Temperature ranges - Operating -40 C to +85 C (with derating) - Case temperature +105 C max. - Storage -55 C to +125 C Power derating 2.2 %/K above 60C Thermal inpedance - Natural convection 18.2 C/W Humidity (non condensing) 5 % to 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, @ +25C, ground benign) >560'000 h Isolation voltage (60sec) - Input/Output 1'500 VDC Isolation capacity - Input/Output 1000 pF typ. Isolation resistance - Input/Output (500 VDC) >1'000 MOhm Remote On/Off - On: 3.0 ... 15 VDC or open circuit - Off: 0 ... 1.2 VDC or short circuit pin 6 and pin 2 - Off idle current: 2.5 mA Switching frequency (fixed) 400 kHz typ. (pulse width modulation PWM) Vibration and thermal shock MIL-STD-810E Safety standards UL /cUL 60950-1, EN 60950-1, IEC 60950-1 Safety approvals - UL/cUL www.ul.com -> certifications -> File E188913 Physical Specifications Case material nickel coated copper Baseplate non conductive FR4 Potting material epoxy (UL 94V-0 rated) Weight 15 g (0.53 oz) Soldering temperature max. 265 C / 10sec. Outline Dimensions 7.62 5.08 (0.3) (0.2) 3 5.6 9.9 2.5 10.16 10.16 (0.22) (0.39) (0.1) (0.4) (0.4) (1.0) 2.5 4 5 (0.1) Bottom view 25.4 (0.8) 20.32 1 2 6 Pin-Out Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 -Vin (GND) -Vin (GND) 3 + Vout + Vout 4 Trim Common 5 -Vout -Vout 6 Remote On/Off 25.4 (1.0) Specifications can be changed any time without notice. Dimensions in [mm], () = Inch Pin diameter o 1.0 (0.04) Pin pitch tolerances: 0.35 (0.014) Tolerances: 0.5 (0.02) Rev. 07/08 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41 43 311 45 11 * Fax +41 43 311 45 45 * info@traco.ch * www.tracopower.com Page 3 of 3