SNAP-AIV-I - OPTO 22 - Datasheet.Live

SNAP Isolated Analog Input

Modules

PAGE

1

DATA SHEET

Form 1182-161011

SNAP Isolated Analog Input Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Features

Channel-to-channel isolation

Rugged packaging and convenient pluggable wiring.

Accepts 22 to 14 AWG wire.

Factory calibrated; no user adjustment necessary

Out-of-range indication

Operating temperature -20 °C to 70 °C

Description

SNAP I/O isolated analog input modules provide two or more

channels isolated from each other, thereby eliminating

problems caused by ground loop currents. These isolated

analog modules are part of Opto 22’s SNAP PAC System and

mount on SNAP PAC racks with an I/O processor (brain or on-

the-rack controller). SNAP isolated analog input modules are

compatible with all SNAP PAC brains and rack-mounted

controllers, including Wired+Wireless™.

Since many SNAP analog input modules are software-

configurable and handle a wide variety of signal levels, a small

number of modules can support a wide range of input

requirements. Modules provide high resolution for precise

signal levels, and all SNAP analog modules are factory

calibrated. Part numbers ending in -FM are Factory Mutual

approved. Dimensional drawings start on page 14.

SNAP analog input modules have an on-board microprocessor

to provide module-level intelligence, making them an ideal

choice for original equipment manufacturers (OEMs). For more

information about standalone SNAP analog modules, see the

SNAP I/O Module Integration Guide (form 876).

SNAP racks have a retention rail locking system. Use two 4-40

by ½-inch standard machine screws to hold each module

securely in position on the SNAP rack (recommended torque:

4 inch pounds [0.45 Newton meters]).

Notes for legacy hardware: Most isolated analog input

modules can be used with SNAP Simple, SNAP Ethernet, SNAP

Ultimate, and SNAP mistic brains such as the serial B3000, and

with M-series or B-series mounting racks. For exceptions, see

individual module descriptions.

Isolation

All SNAP analog input modules are isolated from all other

modules and from the I/O processor. In addition, the modules

in this data sheet have all channels isolated from each other.

Channel-to-channel isolation gives you complete freedom

from ground-loop problems even on grounded devices

connected to channels on the same module.

Transformer isolation prevents ground loop currents from

flowing between field devices and causing noise that

produces erroneous readings. Ground loop currents are

caused when two grounded field devices share a connection,

and the ground potential at each device is different.

Isolation also provides protection for sensitive control

electronics from industrial field signals.

Part Numbers

Part Description Pg

SNAP-AIARMS-i

SNAP-AIARMS-i-FM*

Isolated two-channel 0 to 10 amp

RMS AC/DC input 2

SNAP-AIVRMS-i

SNAP-AIVRMS-i-FM*

Isolated two-channel 0 to 250 V

RMS AC/DC input 3

SNAP-AIMA-i Isolated two-channel analog cur-

rent input -20 mA to +20 mA 4

SNAP-AIMA-iSRC

SNAP-AIMA-iSRC-FM*

Isolated two-channel analog cur-

rent input -20 mA to +20 mA, with

loop sourcing

5

SNAP-AIMA2-i Isolated two-channel analog cur-

rent input -1 mA to +1 mA 6

SNAP-AIRATE-HFi

Isolated two-channel analog fre-

quency input, 2 Hz to 500 kHz or

20 Hz to 500 kHz

7

SNAP-AITM-i

Isolated two-channel analog type

E, J, or K thermocouple or

±150 mV or ±75 mV input

9

SNAP-AITM2-i

Isolated two-channel analog type

B, C, D, G, N, T, R, or S thermocou-

ple or ±50 mV or ±25 mV input

10

SNAP-AITM-4i

Isolated four-channel analog type

B, C, D, E, G, J, K, N, R, S, or T

thermocouple or ±150 mV, ±75 mV,

±50mV, or ±25mV input

11

SNAP-AIV-i Isolated two-channel analog volt-

age input ±10 VDC or ±5 VDC 12

SNAP-AIV2-i Isolated two-channel analog volt-

age input ±100 VDC or ±50 VDC 13

* Factory Mutual approved

SNAP Isolated Analog Input Modules

PAGE

2

DATA SHEET

Form 1182-161011

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Description

The SNAP-AIARMS-i and SNAP-AIARMS-i-FM modules provide

an input range of 0 to 10 amps RMS AC/DC. An ideal input is the

5-amp secondary of a standard current transformer used to

monitor AC line current. These modules may also be used to

monitor AC current to greater than a 100-amp range, using a

current transformer of suitable ratio. The SNAP-AIARMS-i-FM

module is Factory Mutual approved.

The two channels are isolated from each other; they do not share

any field connection. These modules are ideal for differential

current measurements.

Specifications

Part Number Description

SNAP-AIARMS-i

SNAP-AIARMS-i-FM

Isolated two-channel 0 to 10 amp RMS

AC/DC input

Input Range 0 to 10 amp RMS AC/DC

Input Over Range To 11 amps

Input Resistance 0.005 ohms

Maximum Input 11 amps AC/DC

Accuracy (AC) ±8 mA and ±0.2% reading

Resolution 400 µA

DC Reversal ±16 mA (0.16%)

Input Response Time

(Step Change)

63.2% (6.32 A) in 50 ms

99% (9.92 A) in 75 ms

Data Freshness (Max) 0.025 ms

DC Common Mode Rejection >-120 dB

AC Common Mode Rejection >-120 dB at 60 Hz

Maximum Operating

Voltage Between Channels

Common Mode Voltage

250 V

Isolation: Optical 4000 V

Isolation: Transformer 1500 V

Isolation: Channel to Channel 250 V continuous

(1500 V transient)

Power Requirements 5 VDC (±0.15 V) at 200 mA

Ambient Temperature:

Operating

Storage

-20 °C to 70 °C

-40 °C to 85 °C

Torque, hold-down screws 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m)

Wire size range 22 to 14 AWG

Agency Approvals CE, RoHS, DFARS

FM (SNAP-AIARMS-FM only)

Warranty Lifetime

Isolated 0 to 10 Amp RMS AC/DC Input

Module

IMPORTANT: The mounting rack connector has 24 pins; the

module connector has 20 pins. The extra pins on the

mounting rack connector prevent misalignment of the

module during installation.

SNAP Isolated Analog Input Modules

SNAP Isolated Analog Input Modules DATA SHEET

Form 1182-161011

PAGE

3

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Description

The SNAP-AIVRMS-i and SNAP-AIVRMS-i -FM modules provide

an input range of 0 to 250 volts AC or DC. These modules may be

used to monitor 120/240-volt AC/DC and 12/24/48-volt AC/DC

system voltage. The SNAP-AIVRMS-i-FM module is Factory

Mutual approved.

The two channels are isolated from each other; they do not share

any field connection. These modules are ideal for differential

voltage measurements.

Specifications

Part Number Description

SNAP-AIVRMS-i

SNAP-AIVRMS-i-FM

Isolated two-channel 0 to 250 V RMS

AC/DC input

Input Range 0 to 250 V RMS AC/DC

Input Over Range To 275 V

Input Resistance 1 megohms

Accuracy ±0.2 V and ±0.2% reading

Resolution 10 mV

DC Reversal ± 0.2 V (0.08%)

Input Response Time

(Step Change)

63.2% (158 V) in 50 ms

99% (248 V) in 75 ms

Data Freshness 25 ms

DC Common Mode Rejection >-120 dB

AC Common Mode Rejection >-120 dB @ 60 Hz

Maximum Operating

Voltage Between Channels

Common Mode Voltage

250 V

Isolation: Optical 4000 V

Isolation: Transformer 1500 V

Isolation: Channel to Channel 250 V continuous

(1500 V transient)

Power Requirements 5 VDC (±0.15 V) at 200 mA

Ambient Temperature:

Operating

Storage

-20 °C to 70 °C

-40 °C to 85 °C

Torque, hold-down screws 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m)

Wire size range 22 to 14 AWG

Agency Approvals CE, RoHS, DFARS

Warranty Lifetime

Isolated 0 to 250 Volt RMS AC/DC Input

Module

IMPORTANT: The mounting rack connector has 24 pins; the

module connector has 20 pins. The extra pins on the

mounting rack connector prevent misalignment of the

module during installation.

SNAP Isolated Analog Input Modules

PAGE

4

DATA SHEET

Form 1182-161011

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Specifications

Part Number Description

SNAP-AIMA-i Isolated two-channel analog current input

-20 mA to +20 mA

Input Range -20 mA to +20 mA

Maximum Over Range ± 10%

(= ± 27500 counts)

Resolution 0.8 µA

Input Response Time

(% of span/delta I/delta time) 99.9 %/19.9 µA/10 mS

Data Freshness 11 ms

DC Common Mode

Rejection >-120 dB

AC Common Mode

Rejection >-120 dB @ 60 Hz

Maximum Survivable Input 36 mA or 9 VDC

Maximum Operating

Common Mode Voltage 250 V

Accuracy 0.05% (10 µA)

Isolation: Optical 4000 V

Isolation: Transformer 1500 V

Isolation: Channel to Channel 250 V continuous

(1500 V transient)

DRIFT: Gain Temperature Coef-

ficient 30 PPM/ °C

DRIFT: Offset Temperature

Coefficient 15 PPM/ °C

Power Requirements 5 VDC (±0.15 ) @ 200 mA

Input Resistance - Single Ended 200 ohms (each channel)

Ambient Temperature:

Operating

Storage

-20 °C to 70 °C

-40 °C to 85 °C

Torque, hold-down screws 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m)

Wire size range 22 to 14 AWG

Agency Approvals UL, CE, FM, RoHS, DFARS

Warranty Lifetime

Isolated Current Input Module

-20 mA to +20 mA

IMPORTANT: The mounting rack connector has 24 pins; the

module connector has 20 pins. The extra pins on the

mounting rack connector prevent misalignment of the

module during installation.

Description

The SNAP-AIMA-i module provides an input range of -20mA to

+20mA. The SNAP-AIMA-i has two channels that are isolated

from each other. This module DOES NOT supply loop excitation

current. See page 5 for a loop sourcing model.

SNAP Isolated Analog Input Modules

SNAP Isolated Analog Input Modules DATA SHEET

Form 1182-161011

PAGE

5

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Description

The SNAP-AIMA-iSRC and SNAP-AIMA-iSRC-FM are similar to

the SNAP-AIMA-i module but include built-in loop sourcing

capability. With the connection of a single 24 V power

supply, these modules source 24 V for two 4–20 mA loops.

The two channels and their loop sources are isolated from

each other; they do not share any field connection. The

isolation allows you to independently wire one channel to a

loop with an external power supply and the other channel

to a loop powered through the module. In addition, each

loop sourced through the module is current limited so that

an external fault on one loop will not affect the other.

The SNAP-AIMA-iSRC-FM is Factory Mutual approved.

Part Number Description

SNAP-AIMA-iSRC

SNAP-AIMA-iSRC-FM

Isolated two-channel analog current

input -20 mA to +20 mA, with loop

sourcing

Isolated Current Input Module

-20mA to +20mA with Loop Sourcing

IMPORTANT: The mounting rack connector has 24 pins; the

module connector has 20 pins. The extra pins on the

mounting rack connector prevent misalignment of the

module during installation.

Specifications

Input Range 0 to +20 mA with loop sourcing

-20 mA to +20 mA

Maximum Over Range ± 10%

(= ± 27500 counts)

Resolution 0.8 µA

Input Response Time

(% of span/delta I/delta time) 99.9 %/19.9 mA/10 ms

Data Freshness 11 ms

DC Common Mode Rejection >-120 dB

AC Common Mode Rejection >-120 dB @ 60 Hz

Maximum Survivable Input 36 mA or 9 VDC

Maximum Operating

Common Mode Voltage 250 V

Accuracy 0.05% (10 µA)

DRIFT: Gain Temperature

Coefficient 30 PPM/ °C

DRIFT: Offset Temperature

Coefficient 15 PPM/ °C

Isolation: Optical 4000 V

Isolation: Transformer 1500 V

Isolation: Channel to Channel 250 V continuous

(1500 V transient)

Power Requirements 5 VDC (±0.15) @ 200 mA

Power Requirements -

Loop Power (Input)

From separate field connector:

24 VDC nominal (70 mA max @ 24 V

input, both loops @ 20 mA),

30 VDC maximum

Loop Power (Output)

24 VDC (± 1.5 V) @ 20 mA

Open loop: 30 V maximum

Shorted loop: 24 mA nominal

LED on top of module Indicates that there is power to the

24v source supply 2-pin connector

Input Resistance 200 ohms (each channel)

Ambient Temperature:

Operating

Storage

-20 °C to 70 °C

-40 °C to 85 °C

Torque, hold-down screws 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m)

Wire size range 22 to 14 AWG

Agency Approvals CE, RoHS, DFARS

FM (SNAP-AIMA-iSRC-FM only)

Warranty Lifetime

SNAP Isolated Analog Input Modules

PAGE

6

DATA SHEET

Form 1182-161011

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Description

The SNAP-AIMA2-i module provides an input range of -1 mA

to +1 mA. The SNAP-AIMA2-i has two channels that are

isolated from each other. This module DOES NOT supply

loop excitation current.

Specifications

Part Number Description

SNAP-AIMA2-i Isolated two-channel analog current input

-1 mA to +1 mA

Input Range -1 mA to +1mA

Maximum Over Range ± 10%

(= ± 27500 counts)

Resolution 0.04 µA

Input Response Time

(% of span/delta I/delta time) 99.9 %/19.9 µA/10 ms

Data Freshness 11 ms

DC Common Mode Rejection >-120 dB

AC Common Mode Rejection >-120 dB @ 60 Hz

Maximum Survivable Input 11 mA or 28 VDC

Maximum Operating

Common Mode Voltage 250 V

Accuracy 0.05% (0.05 µA)

DRIFT: Gain Temperature

Coefficient 30 PPM/ °C

DRIFT: Offset Temperature

Coefficient 15 PPM/ °C

Isolation: Optical 4000 V

Isolation: Transformer 1500 V

Isolation: Channel to Channel 250 V continuous

(1500 V transient)

Power Requirements 5 VDC (±0.15 ) @ 200 mA

Input Resistance 5 K ohms (each channel)

Ambient Temperature:

Operating

Storage

-20 °C to 70 °C

-40 °C to 85 °C

Torque, hold-down screws 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m)

Wire size range 22 to 14 AWG

Agency Approvals CE, RoHS, DFARS

Warranty Lifetime

Isolated Current Input Module

-1 mA to +1 mA

IMPORTANT: The mounting rack connector has 24 pins; the

module connector has 20 pins. The extra pins on the

mounting rack connector prevent misalignment of the

module during installation.

SNAP Isolated Analog Input Modules

SNAP Isolated Analog Input Modules DATA SHEET

Form 1182-161011

PAGE

7

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Part Number Description

SNAP-AIRATE-HFi Isolated two-channel analog frequency input,

2 Hz–500 kHz or 20 Hz–500 kHz

Isolated Frequency Input Module

Description

The SNAP-AIRATE-HFi module provides frequency to digital

conversion. Each channel can be configured for a 0.1-second

measurement interval, providing an input range of 20 Hz to

500 kHz, or a 1-second measurement interval, providing an

input range of 2 Hz to 500 kHz. Data freshness is dependent

upon and directly related to the measurement interval.

Nine volts through a 3.6 kOhm pull-up resistor is provided

internally for each channel for use with devices that have

open-collector outputs. This feature eliminates the need for

you to provide the pull-up voltage supply and associated

wiring, barrier strips, and so on. The module works with TTL,

CMOS, and open-collector outputs.

The two channels on the module are isolated from each

other. Since these channels do not share any common

connections, grounded sensors and field devices may be

used with them.

This module requires a SNAP PAC controller or brain with

SNAP PAC firmware version 9.3e or higher. It cannot be used

with legacy controllers or brains.

See wiring diagrams on the following page.

Specifications

Input Range

2 Hz - 500 kHz at 1.0 s Data

Freshness

20 Hz - 500 kHz at 0.1 s Data

Freshness

Input Voltage Range

Sine wave >= 2000 Hz

Sine wave at 200 Hz

Sine wave at 20 Hz

Sine wave at 2 Hz

Square wave

Maximum survivable

3.0 V to 48 V

p-p

4.0 V to 48 V

p-p

5.0 V to 48 V

p-p

17 V to 48 V

p-p

3.0 V to 48 V

p-p

110 V

p-p

Input Impedance 55 kOhms

Input Coupling Single-ended AC

Pull-up Voltage 6 to 9 VDC

Pull-up Resistor 3.6 kOhm

Minimum Pulse Width 1 microsecond

Data Freshness* 100 ms at 20 Hz - 500 kHz

1.0 s at 2 Hz to 500 kHz

Resolution (Hz) f / (48,000,000 * Data Freshness),

where f is the current frequency

measurement

Accuracy

(at 1.0 s Data Freshness)

+- 0.005% of input for input greater

than 500 Hz

+- 0.005% of input plus an addi-

tional +- 0.006 Hz for input less

than 500 Hz

Maximum Operating Common

Mode Voltage

250 V Continuous

1500 V Transient

DC Common Mode Rejection > -120 dB

AC Common Mode Rejection > -120 dB at 60 Hz

Isolation: Channel to Channel 250 V Continuous

1500 V Transient

Power Consumption 1.05 W (210 mA @ 5 V)

Ambient Temperature

Operating

Storage

-20 to 70 °C

-40 to 85 °C

Torque, hold-down screws 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m)

Wire size range 22 to 14 AWG

Agency Approvals CE, RoHS, DFARS

Warranty Lifetime

* User selectable. Default is 0.1 seconds.

SNAP Isolated Analog Input Modules

PAGE

8

DATA SHEET

Form 1182-161011

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Isolated Frequency Input Module (cont’d)

SNAP-AIRATE-HFi Wiring Diagrams

The two channels on the module are isolated from each other. Since

these channels do not share any common connections, grounded

sensors and field devices may be used with them.

SNAP Isolated Analog Input Modules

SNAP Isolated Analog Input Modules DATA SHEET

Form 1182-161011

PAGE

9

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Description

The SNAP-AITM-i module provides two channels of

analog to digital conversion. Each channel on the module

can be configured for -150 mV DC to +150 mV DC or -75

mV DC to +75 mV DC, or for type E, J, or K thermocouple

operation. The two channels are isolated from each other.

Since these channels do not share any common

connections, grounded sensors and field devices may be

used with them.

Part Number Description

SNAP-AITM-i

Isolated two-channel analog type E, J, or K

thermocouple or -150 mV to +150 mV input

or -75 mV to +75 mV input

Isolated Thermocouple/

Millivolt Input Module

IMPORTANT: The mounting rack connector has 24 pins; the

module connector has 20 pins. The extra pins on the

mounting rack connector prevent misalignment of the

module during installation.

Specifications

Input Range From -150 mV to +150 mV

From -75 mV to +75 mV

Maximum Over Range ± 10%

(= ± 27500 counts)

Resolution 6 µV from -150 mV to +150 mV

3 µV from -75 mV to +75 mV

Cold Junction Temperature

Compensation Automatic when used with SNAP brains

Input Filtering -3 dB @ 7 Hz

Input Response Time

(% of span/delta V/delta time) 63.2%/95 mV/23 mS

Data Freshness

65 ms for +/- 150 mV

130 ms for +/- 75 mV

130 ms for E-, J-, and K-type thermo-

couples

DC Common Mode Rejection >-120 dB

AC Common Mode Rejection >-120 dB @ 60 Hz

Maximum Survivable Input ±15 volts

Maximum Operating

Common Mode Voltage 250 V

Accuracy 0.06% (90 µV) @ 150 mV (full scale)

0.1% (75 µV) @ 75 mV (full scale)

Drift: Gain Temperature

Coefficient 5 µV / °C

Drift: Offset Temperature Coef-

ficient 2 µV / °C

Thermocouple Accuracy [°C]

From factory

After user gain and offset

commands

± 2.0 (E, J, and K)

± 0.8

Isolation: Optical 4000 V

Isolation: Transformer 1500 V

Isolation: Channel to Channel 250 V continuous

(1500 V transient)

Power Requirements 5 VDC (±0.15) @ 200 mA

Input Resistance 100 megohms (each channel)

Ambient Temperature:

Operating

Storage

-20 °C to 70 °C

-40 °C to 85 °C

Torque, hold-down screws 4 in-lb (0.45 N-m)

Torque, connector screws 3 in-lb (0.34 N-m)

Wire size range 22 to 14 AWG

Agency Approvals CE, FM, RoHS, DFARS

Warranty Lifetime

Type - + Range

E Red Purple -270 °C to +1,000 °C

J Red White -210 °C to +1,200 °C

K Red Yellow -270 °C to +1,372 °C

SNAP Isolated Analog Input Modules

PAGE

10

DATA SHEET

Form 1182-161011

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Specifications

Part Number Description

SNAP-AITM2-i

Isolated two-channel analog type B, C, D, G, N, T, R,

or S thermocouple or -50 mV to +50 mVDC input or -

25 mV to +25 mVDC input

Input Range From -50 mV to +50 mVDC

From -25 mV to +25 mVDC

Maximum Over Range ± 10% (= ± 27500 counts)

Resolution 2 µV from -50 mV to +50 mV

1 µV from -25 mV to +25 mV

Cold Junction Temperature

Compensation

Automatic when used with SNAP

brains

Input Filtering -3 dB @ 2.4 Hz

Input Response Time

(% of span/delta V/delta time) 63.2%/31.5 mV/66 ms

Data Freshness

65 ms for +/- 50 mV

130 ms for +/- 25 mV

130 ms for B-, R-, S-, and T-type

thermocouples

65 ms for C-, D-, G-, and N-type

thermocouples

DC Common Mode Rejection >-120 dB

AC Common Mode Rejection >-120 dB @ 60 Hz

Maximum Survivable Input ±15 volts

Maximum Operating

Common Mode Voltage 250 V

Accuracy 0.1% (50 µV) @ 50 mV (full scale)

0.2% (50 µV) @ 25 mV (full scale)

Drift: Gain Temperature

Coefficient 5 µV / °C

Drift: Offset Temperature Coeffi-

cient 2 µV / °C

Thermocouple Accuracy [°C]

From factory

After user gain and offset com-

mands

B, R, S C, D, G T, N

±5 ±4 ±3

±3 ±2 ±2

Isolation: Optical 4000 V

Isolation: Transformer 1500 V

Isolation: Channel to Channel 250 V continuous

(1500 V transient)

Power Requirements 5 VDC (±0.15 ) @ 200 mA

Input Resistance 100 megohms (each channel)

Ambient Temperature:

Operating

Storage

-20 °C to 70 °C

-40 °C to 85 °C

Torque, hold-down screws 4 in-lb (0.45 N-m)

Torque, connector screws 3 in-lb (0.34 N-m)

Wire size range 22 to 14 AWG

Agency Approvals CE, FM, RoHS, DFARS

Warranty Lifetime

Isolated Thermocouple/

Millivolt Input Module

Type - + Range

B RED GRAY +42 °C to +1,820 °C

C, D, G RED WHITE 0 °C to +2,320 °C

N RED ORANGE -270 °C to +1,300 °C

R, S RED BLACK -50 °C to +1,768 °C

T RED BLUE -270 °C to +400 °C

IMPORTANT: The mounting rack connector has 24 pins; the

module connector has 20 pins. The extra pins on the mounting

rack connector prevent misalignment of the module during

installation.

Description

The SNAP-AITM2-i module provides an input range of ±50

mV, ±25 mV, or Type B, C, D, G, N, T, R, or S thermocouple.

The two channels on the module are isolated from each

other. Since these channels do not share any common

connections, grounded sensors and field devices may be

used with them.

SNAP Isolated Analog Input Modules

SNAP Isolated Analog Input Modules DATA SHEET

Form 1182-161011

PAGE

11

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Isolated Thermocouple/

Millivolt Input Module

Specifications

Input Range

From -150 mV to +150 mVDC

From -75 mV to +75 mVDC

From -50 mV to +50 mVDC

From -25 mV to +25 mVDC

Maximum Over Range ± 10%

(= ± 27500 counts)

Resolution

6 µV from -150 mV to +150 mV

3 µV from -75 mV to +75 mV

2 µV from -50 mV to +50 mV

1 µV from -25 mV to +25 mV

Cold Junction Temperature

Compensation

Automatic when used with SNAP PAC

brains

Input Filtering -3 dB @ 5 Hz

Data Freshness mV input: 75 ms

Thermocouple input: 140 ms

DC Common Mode Rejection >-120 dB

AC Common Mode Rejection >-120 dB @ 60 Hz

Maximum Survivable Input ±15 volts

Maximum Operating

Common Mode Voltage 250 V

Accuracy

0.06% (90 µV) @ 150 mV (full scale)

0.1% (75 µV) @ 75 mV (full scale)

0.1% (50 µV) @ 50 mV (full scale)

0.2% (50 µV) @ 25 mV (full scale)

Drift: Gain Temperature

Coefficient 5 µV / °C

Drift: Offset Temperature Coeffi-

cient 2 µV / °C

Thermocouple Accuracy [°C] B,R,S C,D,G E,J,K N,T

From factory ±5.0 ±4.0 ± 2.0 ±3.0

After user gain and offset com-

mands ±3.0 ±2.0 ± 0.8 ±2.0

Isolation: Transformer 1500 V

Isolation: Channel to Channel 250 V continuous

(1500 V transient)

Power Requirements 5 VDC (±0.15 ) @ 150 mA

Input Resistance 100 megohms (each channel)

Ambient Temperature:

Operating

Storage

-20 °C to 70 °C

-40 °C to 85 °C

Torque, connector screws 3 in-lb (0.34 N-m)

Wire size range 22 to 14 AWG

Agency Approvals CE, RoHS, DFARS

Warranty Lifetime

+–

CH0

+–

CH1

+–

CH2

+–

CH3

Part Number Description

SNAP-AITM-4i

Isolated four-channel analog type B, C, D, E,

G, J, K, N, R, S, or T thermocouple or ±150

mV, ±75 mV, ±50 mV, or ±25 mV input

Type - + Range

BRedGray

+42 °C to +1,820 °C

C, D, G Red White 0 °C to +2,320 °C

E Red Purple -270 °C to +1,000 °C

J Red White -210 °C to +1,200 °C

K Red Yellow -270 °C to +1,372 °C

N Red Orange -270 °C to +1,300 °C

R, S Red Black -50 °C to +1,768 °C

TRedBlue

-270 °C to +400 °C

Description

The SNAP-AITM-4i module provides an input range of

±150 mV, ±75 mV, ±50 mV, ±25 mV, or Type B, C, D, E, G, J,

K, N, R, S, or T thermocouple.

The four channels on the module are isolated from each

other. Since these channels do not share any common

connections, grounded sensors and field devices may be

used with them.

SNAP-AITM-4i requires a SNAP PAC rack, a SNAP PAC brain

or R-series controller with firmware 9.1 or newer, and PAC

Project 9.1 or newer.

SNAP Isolated Analog Input Modules

PAGE

12

DATA SHEET

Form 1182-161011

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Specifications

Part Number Description

SNAP-AIV-i Isolated two-channel analog voltage input

-10 VDC to +10 VDC or -5 VDC to +5 VDC

Input Range From -10 volts to +10 volts

From -5 volts to +5 volts

Maximum Over Range ± 10%

(= ± 27500 counts)

Resolution

0.4 mV when configured

-10 volts to +10 volts

0.2 mV when configured

-5 volts to +5 volts

Input Filtering -3 dB @ 64 Hz

Input Response Time

(% of span/ DV / Dt) 63.2% / 6.7 V / 10 mS

Data Freshness 11 ms for +/- 10 V

18 ms for +/- 5 V

DC Common Mode Rejec-

tion >-120 dB

AC Common Mode

Rejection >-120 dB @ 60 Hz

Maximum Survivable Input 220 VAC or 300 VDC

Maximum Operating Com-

mon Mode Voltage 250 V

Accuracy 0.05%, 5 mV @ 10 VDC

2.5 mV @ 5 VDC

Gain Temperature

Coefficient 30 PPM/ °C

Offset Temperature

Coefficient 15 PPM/ °C

Isolation: Optical 4000 V

Isolation: Transformer 1500 V

Isolation: Channel to Chan-

nel

250 V continuous

(1500 V transient)

Power Requirements 5 VDC (±0.15) @ 200 mA

Input Resistance 1 megohms (each channel)

Ambient Temperature:

Operating

Storage

-20 °C to 70 °C

-40 °C to 85 °C

Torque, hold-down screws 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m)

Wire size range 22 to 14 AWG

Agency Approvals UL, CE, FM, RoHS, DFARS

Warranty Lifetime

Isolated Voltage Input Module

-10 VDC to +10 VDC or

-5 VDC to +5 VDC

IMPORTANT: The mounting rack connector has 24 pins; the

module connector has 20 pins. The extra pins on the

mounting rack connector prevent misalignment of the

module during installation.

Description

The SNAP-AIV-i module can be configured for either -10 VDC to

+10 VDC or -5 VDC to +5 VDC operation on each channel. The

SNAP-AIV-i provides two channels that are isolated from each

other. Since these channels do not share any common

connections, grounded sensors and field devices may be used

with them.

SNAP Isolated Analog Input Modules

SNAP Isolated Analog Input Modules DATA SHEET

Form 1182-161011

PAGE

13

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Specifications

Part Number Description

SNAP-AIV2-i Isolated two-channel analog voltage input

-100 VDC to +100 VDC or -50 VDC to +50 VDC

Input Range From -100 volts to +100 volts

From -50 volts to +50 volts

Maximum Over Range ± 10%

(= ± 27500 counts)

Resolution

4.0 mV when configured -100 volts to

+100 volts

2.0 mV when configured -50 volts to

+50 volts

Input Filtering -3 dB @ 64 Hz

Input Response Time

(% of span/ DV / Dt) 63.2% / 6.7 V / 10 mS

Data Freshness 11 ms for +/- 100 V

18 ms for +/- 50 V

DC Common Mode

Rejection >-120 dB

AC Common Mode

Rejection >-120 dB @ 60 Hz

Maximum Survivable

Input 220 VAC or 300 VDC

Maximum Operating

Common Mode Voltage 250 V

Accuracy 0.05%, 50 mV @ 100 VDC

25 mV @ 50 VDC

Gain Temperature Coeffi-

cient 30 PPM/ °C

Offset Temperature Coef-

ficient 15 PPM/ °C

Isolation: Optical 4000 V

Isolation: Transformer 1500 V

Isolation: Channel to

Channel

250 V continuous

(1500 V transient)

Power Requirements 5 VDC (±0.15) @ 200 mA

Input Resistance 1 megohms (each channel)

Ambient Temperature:

Operating

Storage

-20 °C to 70 °C

-40 °C to 85 °C

Torque, hold-down

screws 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m)

Wire size range 22 to 14 AWG

Agency Approvals CE, RoHS, DFARS

Warranty Lifetime

Isolated Voltage Input Module

-100 VDC to +100 VDC or

-50 VDC to +50 VDC

IMPORTANT: The mounting rack connector has 24 pins; the

module connector has 20 pins. The extra pins on the

mounting rack connector prevent misalignment of the

module during installation.

Description

The SNAP-AIV2-i module can be configured for either -100

VDC to +100 VDC or -50 VDC to +50 VDC operation on each

channel. The SNAP-AIV2-i provides two channels that are

isolated from each other. Since these channels do not share

any common connections, grounded sensors and field

devices may be used with them.

SNAP Isolated Analog Input Modules

PAGE

14

DATA SHEET

Form 1182-161011

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Dimensional Drawing

All Modules Except SNAP-AITM-i, SNAP-AITM2-i, SNAP-AITM-4i, SNAP-AIMA-iSRC, and SNAP-AIMA-iSRC-FM

SNAP Isolated Analog Input Modules

SNAP Isolated Analog Input Modules DATA SHEET

Form 1182-161011

PAGE

15

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Dimensional Drawing

SNAP-AITM-i and SNAP-AITM2-i Modules

SNAP Isolated Analog Input Modules

PAGE

16

DATA SHEET

Form 1182-161011

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Dimensional Drawing

SNAP-AITM-4i Module

SNAP Isolated Analog Input Modules

SNAP Isolated Analog Input Modules DATA SHEET

Form 1182-161011

PAGE

17

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Dimensional Drawing

SNAP-AIMA-iSRC and SNAP-AIMA-iSRC-FM Modules

SNAP Isolated Analog Input Modules

PAGE

18

DATA SHEET

Form 1182-161011

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Dimensional Drawing

IMPORTANT: The mounting rack connector has 24

pins; the module connector has 20 pins. The extra pins

on the mounting rack connector prevent

misalignment of the module during installation.

All Modules

SNAP Isolated Analog Input Modules

SNAP Isolated Analog Input Modules DATA SHEET

Form 1182-161011

PAGE

19

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Dimensional Drawing

SNAP Isolated Analog Input Modules

PAGE

20

DATA SHEET

Form 1182-161011

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Dimensional Drawing

Height on Rack: SNAP-AITMi and SNAP-AITM2-i Modules

More About Opto 22

www.opto22.com • Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • Form 1335-160810

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2013–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Products

Opto 22 develops and manufactures reliable, easy-to-use, open

standards-based hardware and software products deployed

worldwide.

Industrial automation, process control, building automation,

industrial refrigeration, remote monitoring, data acquisition,

Industrial Internet of Things (IIoT), and information technology

applications all rely on Opto 22.

groov

Monitor and control your

equipment from anywhere

using your smartphone or

tablet with groov. Build your

own mobile app easily—just

drag, drop, and tag. No

programming or coding. Visit

groov.com

for more

information and your free trial.

SNAP PAC System

Developer- and IIoT-ready, the SNAP PAC System connects

physical assets to databases and applications using open

standards. The SNAP PAC System consists of four integrated

components:

•SNAP PAC controllers

•PAC Project™ Software Suite

•SNAP PAC brains

•SNAP I/O™

SNAP PAC Controllers

SNAP PAC programmable

automation controllers handle a

wide range of digital, analog, and

serial functions for data collection,

remote monitoring, process control,

and discrete and hybrid manufacturing.

For IIoT applications and easier integration with company

systems, standalone and rack-mounted SNAP PACs include a

built-in HTTP/HTTPS server and

RESTful API

(application

program interface). The REST API gives you secure, direct access

to I/O and variable data using your choice of programming

languages. No middleware, protocol converters, drivers, or

gateways needed.

Based on open Ethernet and Internet Protocol (IP) standards,

SNAP PACs make it easier to build or extend a system without the

expense and limitations of proprietary networks and protocols.

PAC Project Software Suite

Opto 22’s PAC Project Software Suite offers full-featured, cost-

effective control programming, HMI (human machine interface),

OPC server, and database connectivity software.

Control programming includes both easy-to-learn flowcharts and

optional scripting. Commands are in plain English; variables and

I/O point names are fully descriptive.

PAC Project Basic offers control and HMI tools and is free for

download on our website,

www.opto22.com

. PAC Project

Professional, available for separate purchase, adds one SoftPAC

software-based controller, OptoOPCServer, OptoDataLink,

options for controller redundancy or segmented networking, and

support for legacy Opto 22 serial

mistic™

I/O units.

SNAP PAC Brains

While SNAP PAC controllers provide central control and data

distribution, SNAP PAC brains provide distributed intelligence for

I/O processing and communications. Brains offer analog, digital,

and serial functions, including thermocouple linearization, local

PID loop control, watchdog, totalizing, and much more.

SNAP I/O

I/O provides the local connection to sensors and equipment.

Opto 22 SNAP I/O offers 1 to 32 points of reliable I/O per module.

Analog, digital, and serial modules are mixed on one mounting

rack and controlled by a SNAP PAC brain or rack-mounted PAC.

Quality

Founded in 1974, Opto 22 has established a worldwide

reputation for high-quality products. All are made in the U.S.A. at

our manufacturing facility in Temecula, California.

Because we test each product twice before it leaves

our factory, rather than only testing a sample of each

batch, we can guarantee most solid-state relays and

optically isolated I/O modules for life.

Free Product Support

Opto 22’s California-based Product Support Group

offers free, comprehensive technical support for

Opto 22 products from engineers with decades of training and

experience. Support is available in English and Spanish by phone

or email, Monday–Friday, 7 a.m. to 5 p.m. PST.

Additional support is always available on our website: how-to

videos, OptoKnowledgeBase, self-training guide, troubleshooting

and user’s guides, and OptoForums.

In addition, hands-on training is available for free at our Temecula,

California headquarters, and you can

register online

.

Purchasing Opto 22 Products

Opto 22 products are sold directly and through a worldwide

network of distributors, partners, and system integrators.

For more information, contact Opto 22 headquarters at

800-321-6786 (toll-free in the U.S. and Canada) or 951-695-3000,

or visit our website at

www.opto22.com

.

www.opto22.com