SCHOTTKY RECTIFIER 7 Amp
6CWQ03FN
Major Ratings and Characteristics
IF(AV) Rectangular 7 A
waveform
VRRM 30 V
IFSM @ tp = 5 μs sine 535 A
VF@ 3 Apk, TJ
= 125°C 0.35 V
(per leg)
TJrange - 40 to 150 °C
Characteristics Values Units
Description/ Features
The 6CWQ03FN surface mount, center tap, Schottky
rectifier series has been designed for applications requiring
low forward drop and small foot prints on PC board. Typical
applications are in disk drives, switching power supplies,
converters, free-wheeling diodes, battery charging, and re-
verse battery protection.
Popular D-PAK outline
Center tap configuration
Small foot print, surface mountable
Low forward voltage drop
High frequency operation
Guard ring for enhanced ruggedness and long term
reliability
IF(AV) = 7Amp
VR = 30V
Case Styles
D-PAK (TO-252AA)
Anode
13
4
Anode
2
Base
Common
Cathode
Common
Cathode
Bulletin PD-20560 rev. H 05/06
Document Number: 93383
www.vishay.de
1
6CWQ03FN
Bulletin PD-20560 rev. H 05/06
VFM Max. Forward Voltage Drop 0.45 V @ 3A
(Per Leg) * See Fig. 1 (1) 0.52 V @ 6A
0.35 V @ 3A
0.46 V @ 6A
IRM Max. Reverse Leakage Current 2 mA TJ = 25 °C
(Per Leg) * See Fig. 2 (1) 50 mA TJ = 125 °C
VF(TO) Threshold Voltage 0.22 V TJ = TJ max.
rtForward Slope Resistance 32.86 mΩ
CTTyp. Junction Capacitance (Per Leg) 290 pF VR = 5VDC (test signal range 100Khz to 1Mhz) 25°C
LSTypical Series Inductance (Per Leg) 5.0 nH Measured lead to lead 5mm from package body
dv/dt Max. Voltage Rate of Change 10000 V/μs (Rated VR)
TJMax. Junction Temperature Range (*) -40 to 150 °C
Tstg Max. Storage Temperature Range -40 to 150 °C
RthJC Max. Thermal Resistance (Per Leg) 4.70 °C/W DC operation * See Fig. 4
Junction to Case (Per Device) 2.35
wt Approximate Weight 0.3 (0.01) g (oz.)
Case Style D-Pak Similar to TO-252AA
Marking Device 6CWQ03FN
Thermal-Mechanical Specifications
TJ = 25 °C
TJ = 125 °C
Electrical Specifications
(1) Pulse Width < 300μs, Duty Cycle <2%
VR = rated VR
Part number 6CWQ03FN
VRMax. DC Reverse Voltage (V)
VRWM Max. Working Peak Reverse Voltage (V)
Voltage Ratings
30
Parameters 6CWQ... Units Conditions
Parameters 6CWQ... Units Conditions
IF(AV) Max. Average Forward (Per Leg) 3.5 A 50% duty cycle @ TC = 134°C, rectangular wave form
Current * See Fig. 5 (Per Device) 7
IFSM Max. Peak One Cycle Non-Repetitive 5 35 5 μs Sine or 3μs Rect. pulse
Surge Current (Per Leg) * See Fig. 7 90 10ms Sine or 6ms Rect. pulse
EAS Non-Repet. Avalan. Energy (Per Leg) 8 mJ TJ = 25 °C, IAS
= 2 Amps, L =4 mH
IAR Repetitive Avalanche Current 1.0 A Current decaying linearly to zero in 1 μsec
(Per Leg) Frequency limited by TJ max. VA = 1.5 x VR typical
Absolute Maximum Ratings
Following any rated
load condition and with
rated VRRM applied
A
Parameters 6CWQ... Units Conditions
< thermal runaway condition for a diode on its own heatsink
(*) dPtot 1
dTj Rth( j-a)
Document Number: 93383
www.vishay.de
2
6CWQ03FN
Bulletin PD-20560 rev. H 05/06
Fig. 2 - Typical Values Of Reverse Current
Vs. Reverse Voltage (Per Leg)
Fig. 3 - Typical Junction Capacitance
Vs. Reverse Voltage (Per Leg)
Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg)
Fig. 1 - Max. Forward Voltage Drop Characteristics
(Per Leg)
0.001
0.01
0.1
1
10
100
5 1015202530
R
R
125°C
100°C
75°C
50°C
25°C
Reve rse Current - I (mA)
T = 150°C
J
Reverse Volta ge - V (V)
0.1
1
10
0.00001 0.0001 0.001 0.01 0.1 1
thJC
t , Rectangular Pulse Duration (Seconds)
Sing le Pulse
(Thermal Resistance)
1
Thermal Impedance Z (°C/W)
D = 0.75
D = 0.50
D = 0.33
D = 0.25
D = 0.20
12
J
DM
thJC C
2
t
1
t
P
DM
Not es:
1. Duty factor D = t / t
2. Peak T = P x Z + T
1
10
100
0.20.40.60.8 1 1.21.41.61.8 2 2.2
Inst ant ane ous Forward Current - I (A)
F
FM
Forward Voltage Drop - V (V)
T = 150°C
T = 125°C
T = 2 5 ° C
J
J
J
100
1000
0 5 10 15 20 25 30 35
R
T
Junction Capacitance - C (pF)
Reverse Voltage - V (V)
T = 2 5 ° C
J
Document Number: 93383
www.vishay.de
3
6CWQ03FN
Bulletin PD-20560 rev. H 05/06
Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg)
Fig. 5 - Max. Allowable Case Temperature
Vs. Average Forward Current (Per Leg)
Fig. 6 - Forward Power Loss Characteristics
(Per Leg)
(2) Formula used: TC = TJ - (Pd + PdREV) x RthJC
;
Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6);
PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1
= 80% rated VR
10
100
1000
10 100 1000 10000
FSM
Non-Repetitive Surge Current - I (A)
p
Sq ua re Wave Pulse Dura t ion - t (m ic ro sec )
At Any Rated Load Condition
And With Rated V Applied
Follow ing Surg e
RRM
110
120
130
140
150
012345
DC
Allowable Case Temperature - (°C)
F( A V )
see note (2)
Average Forward Current - I (A)
Squa re wave (D = 0.50)
80% Rated V applied
R
0
0.5
1
1.5
2
012345
DC
Average Power Loss - (Watts)
F( A V )
RM S Li m i t
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
Average Forward Current - I (A)
Document Number: 93383
www.vishay.de
4
6CWQ03FN
Bulletin PD-20560 rev. H 05/06
6CWQ03FN
ASSEMBLED ON WW 02, 2000
LOT CODE 8024
THIS IS A 6CWQ03FN
ASSEMBLY
LOT CODE
LOGO
INTERNATIONAL
RECTIFIER
DATE CODE
PART NUMBER
YEAR 0 = 2000
WEEK 02
X = SITE ID
Part Marking Information
Outline Table
Modified JEDEC outline TO-252AA
Dimensions in millimeters and (inches)
Document Number: 93383
www.vishay.de
5
6CWQ03FN
Bulletin PD-20560 rev. H 05/06
Tape & Reel Information
TR
FEED DIRECTION
4.1 (0.16)
3.9 (0.15)
2.1 (0.83)
1.9 (0.07)
12.1 (0.48)
1.65 (0.06)
1.85 (0.07)
1.65 (0.06)
7.4 (0.29)
2.6 (0.10)
1.5 (0.06)
7.6 (0.30)
11.9 (0.47)
1.85 (0.07)
TO-252AA Tape & Reel
When ordering, indicate the part
number, part orientation, and the
quantity. Quantities are in multiples
of 2,000 pieces per reel for TR and
multiples of 3,000 pieces per reel
for both TRL and TRR.
13 (0.52) DIA.
DIA. MAX.
375 (14.17) 50 (1.97) DIA.
22.4 (0.88)
0.35 (0.01)
16.3 (0.64)
15.7 (0.62)
2.75 (0.11)
2.55 (0.10)
0.25 (0.01)
6.8 (0.26)
7.0 (0.28)
TRR
FEED DIRECTION
4.1 (0.16)
3.9 (0.15)
2.1 (0.83)
1.9 (0.07)
8.1 (0.32)
1.85 (0.07)
1.65 (0.06)
1.85 (0.07)
1.65 (0.06)
7.4 (0.29)
2.6 (0.10)
1.5 (0.06)
7.6 (0.30)
7.9 (0.31)
0.35 (0.01)
16.3 (0.64)
15.7 (0.62)
2.75 (0.11)
2.55 (0.10)
0.25 (0.01)
10.4 (0.41)
10.6 (0.42)
DIA.
TRL
FEED DIRECTION
4.1 (0.16)
3.9 (0.15)
2.1 (0.83)
1.9 (0.07)
8.1 (0.32)
1.85 (0.07)
1.65 (0.06)
1.85 (0.07)
1.65 (0.06)
7.4 (0.29)
2.6 (0.10)
1.5 (0.06)
7.6 (0.30)
7.9 (0.31)
0.35 (0.01)
16.3 (0.64)
15.7 (0.62)
2.75 (0.11)
2.55 (0.10)
0.25 (0.01)
10.4 (0.41)
10.6 (0.42)
DIA.
DIA.
DIA.
DIA.
DIA.
Document Number: 93383
www.vishay.de
6
6CWQ03FN
Bulletin PD-20560 rev. H 05/06
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
05/06
Data and specifications subject to change without notice.
This product has been designed and qualified for AEC Q101 Level.
Qualification Standards can be found on IR's Web site.
Ordering Information Table
6 C W Q 03 FN TRL -
Device Code
152 4
36
1- Current Rating (7A)
2- Center Tap Configuration-
3- Package Identifier
4W = D-Pak
4- Schottky "Q" Series
5- Voltage Rating (03 = 30V)
6- FN = TO-252AA
7-y none = Tube (50 pieces)
y TR = Tape & Reel
y TRL = Tape & Reel (Left Oriented)
y TRR = Tape & Reel (Right Oriented)
8-y none = Standard Production
y PbF = Lead-Free
78
Document Number: 93383
www.vishay.de
7
Legal Disclaimer Notice
Vishay
Document Number: 99901 www.vishay.com
Revision: 12-Mar-07 1
Notice
The products described herein were acquired by Vishay Intertechnology, Inc., as part of its acquisition of
International Rectifier’s Power Control Systems (PCS) business, which closed in April 2007. Specifications of the
products displayed herein are pending review by Vishay and are subject to the terms and conditions shown below.
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or
anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
International Rectifier®, IR®, the IR logo, HEXFET®, HEXSense®, HEXDIP®, DOL®, INTERO®, and POWIRTRAIN®
are registered trademarks of International Rectifier Corporation in the U.S. and other countries. All other product
names noted herein may be trademarks of their respective owners.
